Used Herbold Dry Cleaner/ Friction Cleaner for sale (3,589)

Condition: good (used), Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums, wet/dry vacuums, liquid and chip vacuums, water vacuums, wet vacuums -Manufacturer: Wap, Industrial vacuum cleaner, 2-motor wet/dry vacuum cleaner -Type: turbo M2 -Connection: 220...240 volts -Power: 1400...1600 W Iisdex I A Dhspfx Apcjg -Dimensions: 700/600/H1070 mm -Weight: 30 kg

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and intensively cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the current operations. Materials are firstly delivered either by manual loading , or by an automatic pnematic box or cage lift/tilt system to a picking belt and metal detection tunnel. Materials then proceed via an inclined conveyor belt to a Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water and any fines. Granulated materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge and all used water is then recirculated to heated tank to be reused. Finished materials then conveyed to a ZigZag air separator for final fines/dust removal before being blown to a cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Iiodpexcnxdsfx Apceg Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment.

Year of construction: 2018, condition: ready for operation (used), Offered is a cleaning system for assemblies in electronics manufacturing: Functions: injection flooding with compressed-air support, vacuum drying, 100% recirculation (closed loop), MPC-cleaner compatible. Technical data: cleaning tank 80L, rinsing tanks 2x 60L. Stainless steel construction. Dimensions X/Y/Z: approx. 1600mm/1000mm/2000mm, weight: approx. 700kg, including operating manual, data sheet, CE declaration. Viewing possible by arrangement. Iiedpfox Hff Ejx Apcsg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Iisdpfozw Apgex Apcsg Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Iisdpfsq Nx Aljx Apcsg Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: used, The HERBOLD Plastkompaktor is a system for agglomerating films, fibres, chips, dust and flakes. Poorly free-flowing waste is transformed into an agglomerate with a high bulk density and good flowability, which can therefore be fed directly into extruders and injection moulding machines. Iiedjzy Hwmopfx Apcsg The system for sale has a main motor with 110 kW drive power and a throughput of 600 to 2000 kg/h depending on the feed material. All thermoplastics can be processed, even sensitive materials such as PET, PA and bioplastics can be agglomerated without thermal damage or discolouration. The system consists of the feeding device with silo, the compactor, a secondary granulator with sifting and fines return. On request, pre-shredding can be offered that is customised to the task at hand Trials can be carried out in our technical centre for suitability tests and sampling. We are the manufacturer of this system and can guarantee service and spare parts supply. The system is available at short notice!

Condition: good (used), MPS EF 410 - 8 color Label Printing Machine Ref.: FGT 25-230 We are pleased to present this 2008 MPS EF 410 - a high-precision, versatile UV flexo press designed for a wide range of applications. The MPS EF 410 model is a servo-driven, 410mm wide, multi-substrate press, capable of running self-adhesive materials as well as unsupported plastic films. With robust features and premium components, this machine is engineered for reliable, high-quality production. Iiodpfxju Rdgbe Apceg _____ Key Specifications & Configuration - Printing Width: 410 mm - Technology: Servo-driven UV flexo press - Substrate Handling: Spiral rollers and chill drums for multi-substrate versatility _____ Machine Features - Unwind Unit with Lift - Web Guide & Splice Table - Teknek Web Cleaner - 8 Flexo Printing Units for optimal color flexibility - Automatic Registration Control ensuring precise alignment - Delam/Relam with Web Turn Bars - enables printing of 2 colors on reverse side - Anti-Static Bars across the web path - 9 GEW UV Dryers providing efficient curing _____ Enhanced Finishing Capabilities - Full Rail System allowing for tool movement along the press - Overlamination/Cold Foil with UV drying for premium effects - Double Die Station: o 1 x K&B Gapmaster Die for advanced control o 1 x Tecnocut Electronically Adjustable Anvil - Dual Web Inspection Cameras (Top & Bottom) - Razor Slitting for precise edge cutting - Waste Matrix Rewind and Product Rewind units _____ Additional Equipment & Accessories - Impression Cylinder Sets (x8): Sizes include 68, 72, 74, 77, 78, 80, 84, 88, 90, 93, 96, 99, 102, 104, 108, 114, 120, 128 - Magnetic Cylinders: Sizes include 136, 144, 148, 154, 160, 168, 176, 180, 93, 96, 99, 102, 104, 114, 120, 128 - 22 Anilox Rolls in various sizes for consistent ink distribution _____ Technical and Optical Condition: - Technical: 9/10 (checked and in excellent running condition) - Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Condition: used, Year of construction: 2006, functionality: fully functional, Equipment: documentation/manual, The DRYMAX desiccant dryer is for sale. Here are some technical details: The unit has also had the molecular sieve in both drying cartridges replaced. Ijdoz Aytyopfx Apcjig Dew point: up to -40/-60 degrees Motorized switching valve Energy-saving regeneration SmartFlow Material protection function Fine filter for return air

Condition: good (used), Year of construction: 2021, Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuums, floor vacuums, safety industrial vacuums, wet/dry vacuums, liquid and chip vacuums, water vacuums, wet vacuums -Manufacturer: cleancraft, industrial vacuum cleaner type wetCAT 131 IRH -Connection: 230 volts -Power: 2.4 kW Iedpfx Aox E Riyjpceig -Dimensions: 500/470/H1100 mm -Weight: 10 kg

Year of construction: 2016, condition: ready for operation (used), Rotor diameter: 260mm, rotor blades: 3, stator blades: 2, motor power: 7.5kW, throughput: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Iisdpfx Asubyyvopcjg

Year of construction: 2017, operating hours: 1 h, condition: used, functionality: fully functional, INTEGRATED DRYERS AND PELLETING SYSTEM WOOD SHAVINGS DRYING OLIVE POMACE DRYING Iiodpfx Ajw Hgbhspcog FULL AUTOMATION WITH VARIABLE SPEED MOTORS STAINLESS STEEL FEEDING AUGERS CONVEYOR TRANSPORT SYSTEMS FUEL AND PRODUCT FEED BUNKERS 9 METER STAINLESS ROTARY DRUM 15 METER IRON ROTARY DRUM 8 MILLION KCAL SOLID FUEL BOILER WITH FULL CAPACITY, IT HAS THE LARGEST WOOD SHAVING DRYING CAPACITY IN TURKEY AT 15–20 TONS/HOUR. IN ACCORDANCE WITH EUROPEAN STANDARDS FOR DETAILED INFORMATION, PLEASE CONTACT US

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, A significantly large capacity Float/Sink tank available from this renowned English specialised manufacturer. All mechanical parts are in excellent order , and apart from re-assembly the equipment is ready to go to work . Estimated at a capacity of 4 - 5 tonnes per hour on Rigid materials, this represents extraordinary value, and is available in the UK avoiding Internationaal transport costs and taxes. An inclined friction washer and materials drier/cleaner are also available - photos included. Iedpfxjw D Uggj Apcoig

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, overall weight: 25 kg, tank capacity: 75 l, warranty duration: 12 months, KARCHER NT 75/1 Me Ec H Z22 INDUSTRIAL VACUUM CLEANER 2018 MANUFACTURED NEW ORIGINAL ACCESSORIES - SAFETY FILTER BAG, SUCTION TUBE, SUCTION HOSE, ELBOW, AND CREVECT + FLAT NOZZLE Industrial vacuum cleaner designed for collecting dry and wet dirt. It is also suitable for removing combustible dust and other Class H dust in areas with explosion hazards designated as Zone 22. A powerful brushless motor ensures long service life. Iiodpfxoy Humxo Apcjg The vacuum cleaner is fully grounded, and the appropriate accessories are electrically conductive to prevent discharge. The device has been thoroughly overhauled and is ready for operation. Thanks to the 75-liter stainless steel tank and the sturdy chassis with an adjustable transport handle, you can easily remove large amounts of dust, coarse dirt, or liquids from the work area. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, to which we cordially invite you. TECHNICAL DATE: Power supply parameters (V/Hz): 220 - 240 / 50 - 60 Air flow rate (l/s): 61 Vacuum (mbar/kPa): 220 / 22 Tank capacity (l): 75 Rated power (W): max. 1000 Nominal diameter ( ): ID 40 Power cord length (m): 10 Cable material: Rubber Sound pressure level (dB(A)): 76 Colour: Silver Weight without accessories (kg): 25.1 Dimensions (L x W x H) (mm): 695 x 540 x 1012 ORIGINAL EQUIPMENT: Safe Filter bag: 1pc. DN 40 suction hose - 4 m DN40 suction pipe - 1 m DN40 elbow Crevice nozzle Flat nozzle

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaner PTC Easypower L B, similar to but not a Dynajet, Oertzen, Falch, Woma, Kamat, or Denjet. - Operating pressure: 200-700 bar - Flow rate: 13-42 l/min - Engine: Kohler Stage V Diesel, 35 HP / 26 kW, 3400 rpm - Dimensions: 1,370 x 850 x 1,020 mm - Dry weight: approx. 260 kg - High-pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame made of painted steel with corrosion protection - Covers made of stainless steel - Holder for gun with lance - Trolley with 4 industrial wheels, 350 mm - Electric starter Iiedpfx Ajfdzy Uopcsg - Operating hour counter - Incl. 20 m high-pressure hose with stainless steel quick-release couplings, spray gun, lance, and flat spray nozzle 15° The following models are available: Easy Power L D 16/500 | 16 l/min. 500 bar Easy Power L D 23/350 | 23 l/min. 350 bar Easy Power L D 20/400 | 20 l/min. 400 bar Easy Power L D 30/280 | 30 l/min. 280 bar Easy Power L D 42/200 | 42 l/min. 200 bar Easy Power L D 13/700 | 13 l/min. 700 bar

Condition: used, Painting line Manufacturer: Giardina, Rich Fruit, Neomec, Kremlin The painting system is designed for painting elements made of MDF or HDF boards. The spray booths have two circuits, one for clear coats and one for colored paints. The system is designed for water-based UV coatings. The system consists of the following elements: Infeed Manufacturer: Neomec Conveyor table with a cleaner Spray painting machine Manufacturer: Giardina Type: Dualtech 416 Drying tunnel with IR lamps, 2 units UV tunnel Roller conveyor Turntable Conveyor table Conveyor table with a cleaner Spray painting machine Manufacturer: Rich Fruit Drying tunnel with IR lamps, 2 units Iiedezuzg Sopfx Apcog UV tunnel Roller conveyor Each booth has two circuits, one for paint and one for coatings, driven by KREMLIN pumps and spray guns from the same company. Length of the machine line: 92 m Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2022, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), type of cooling: air, overall weight: 2,915 kg, total width: 2,140 mm, total length: 8,900 mm, total height: 2,200 mm, warranty duration: 6 months, Dry-cooler BlueBox (Refrion) EK4Y2680.4/2Q 800 KW Cooling capacity: 800 kW (40/35 — +25C) Year of manufacture: 2022 Fluid: Glycol + Water Number of fans: 12 pcs. Fan Diameter: 800 mm Volume: 428 dm³ Dimensions: 8.9 x 2.14 x 2.2 m. Weight: 2915 kg. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. Iiedpjzwd Nhjfx Apcjg The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 11.176, center height: 250 mm, overall weight: 280 kg, spindle speed (max.): 3,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum height: 250 mm Center distance: 1,600 mm Spindle speed: 400–3,000 rpm MACHINE DETAILS Connected load: 3 kW Voltage: 400 V Fuse rating: 16 A Dimensions & Weight Iiodpozzbc Hefx Apcsg Dimensions (L × W × H): 2,460 × 440 × 1,220 mm Dry weight: 280 kg Shipping packages: 1 unit EQUIPMENT CE marking

Condition: used, Big-bag emptying station (0.5 m³, injection blower) – Plastcompactor HV 50/110 (600–700 kg/h, 4 m³ silo with feed screw, agitator, discharge screw, DS drive 110 kW, 2 compacting discs Ø 500 mm with kneading bars and water cooling, Siemens S7) – Post-cutting mill SML 45/100-S3-2 (10 mm screen, 3x1 rotor/2 stator knives, shear cut, spray mist cooling, hydraulic opening, 45 kW) – Fine material separation with a zig-zag sifter and return system – Material discharge with a double big-bag holder MFT 45/350, blower 7.5 kW, cyclone. Iisdpfx Aez Aiuyjpcjg

Year of construction: 2020, operating hours: 1 h, condition: as good as new (ex-display), PTC CJ-1E high-pressure cleaner, similar to but not an Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, or Weidner model. - Operating pressure: 110 bar - Flow rate: 12 l/min - Motor: Electric, 4-pole, 230V, 2.2kW, 1400 rpm - Dimensions: 540 x 440 x 680 mm - Dry weight: approx. 40 kg - High-pressure pump: Comet three-piston pump with ceramic pistons - Robust plastic housing made of injection molding - Practical holder for the spray gun with lance - Self-priming pumps with EASY-START system - Handle with holders for the power cable and the high-pressure hose - Easy maintenance by simply removing the front cover - Large wheels (220 mm diameter) for easy movement on steps and over uneven terrain - Manometer Iiedpfx Aegcbzcjpcog - Built-in professional pressure relief valve - Delayed total stop - Pulsating system - Rotary switch - Thermal motor protection - Manual stainless steel hose reel with 30 m HD hose, 1/4" - 2 pieces of 1/4" male thread pipe cleaning nozzles - Spray gun with washing lance and flat spray nozzle The CJ-1E is a mobile high-pressure cleaning unit, ideal for cleaning and removing blockages in pipes with diameters from 30 to 120 mm. Equipped with a 2.2 kW, 230V electric motor, it can be used in apartments, houses or commercial premises for cleaning sinks and toilets, as well as for gardens and general cleaning. The Comet LW-K pump with Easy-Start and pulsation function guarantees extreme reliability and high cleaning performance. The CJ-1E can be used in both vertical and horizontal positions. The total stop function ensures that the unit is switched off when not in use. The robust plastic housing and large wheels provide extreme strength and optimal maneuverability.

Condition: used, Year of construction: 2020, operating hours: 555 h, functionality: fully functional, machine/vehicle number: 62006148, operating pressure: 1,000 bar, total length: 1,160 mm, high-pressure hose length: 1,000 mm, total height: 1,300 mm, total width: 800 mm, pressure: 1,000 bar, input voltage: 400 V, fuel: electricity, overall weight: 560 kg, water tank capacity: 20 l, power: 30 kW (40.79 HP), input current: 63 A, noise level: 104 dB, pressure (max.): 500 bar, input frequency: 50 Hz, Equipment: chassis, crane, Used DYNAJET 1000me 400V/50Hz/63A – 1000 Bar High-Pressure Water Jetting System – Only 555 Operating Hours This well-maintained DYNAJET 1000me high-pressure water jetting unit is available for immediate sale. With only 555 operating hours, the machine remains in excellent condition and is ready for demanding industrial cleaning and surface preparation applications. Delivering up to 1000 bar (14,500 PSI) and a flow rate of 17 l/min, the DYNAJET 1000me is designed for professional users who require maximum pressure performance combined with reliable day-to-day operation. The robust four-wheel trolley design ensures easy transportation and flexibility on site, while the industrial-grade construction provides outstanding durability even in harsh working environments. The machine is equipped with a powerful 30 kW electric motor, industrial crankshaft pump, stainless-steel water filtration system, operating-hours meter, automatic motor protection, and DYNAJET's innovative dry-stop pistol technology for improved operator safety and ease of use. Included with the machine: *1 x 1000 bar high-pressure gun *Nozzle holder *Rotating nozzle *High-pressure nozzle *10 m high-pressure hose *Original DYNAJET machine *Only 555 operating hours The DYNAJET 1000me is particularly suitable for: Industrial cleaning Surface preparation Coating and paint removal Concrete renovation work Ship and offshore maintenance Tank and container cleaning Heavy-duty maintenance applications Technical specifications: *Working pressure: 1000 bar (14,500 PSI) *Flow rate: 17 l/min Iiodpfx Aoz Dgt Tspcjg *Electric motor: 30 kW *Voltage: 400V / 50Hz / 63A *Pump type: Triplex plunger pump *Water tank: 20 L *Motor protection: IP54 *Dimensions (L × W × H): 116 × 80 × 130 cm *Weight: approx. 560 kg *Operating hours: 351 h *Key features and advantages: *Only 351 operating hours *1000 bar ultra-high pressure performance *Robust industrial trolley construction *High reliability and long service life *Electric drive with low operating costs *Included 1000 bar gun, nozzle holder, nozzle, and 10 m hose *Immediate availability *Fully functional and ready for operation Please contact us for additional information, photos, pricing, or inspection arrangements.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 675002, travel distance X-axis: 650 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 500 mm, empty load weight: 13,000 kg, TECHNICAL DETAILS Iodpezxckmefx Apceig Travel range, X-axis: 650 mm Travel range, Y-axis: 1,100 mm Travel range, Z-axis: 500 mm C-axis rotation: 360° Tool magazine slots: 32 pcs. MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,800 x 2,800 mm Dry weight: 13,000 kg Transport packages: 3 pcs. EQUIPMENT Documentation CE marking

Condition: used, machine/vehicle number: 13276, Rotor diameter: 450 mm Rotor width: 300 mm Rotor blades: 9 Stator blades: 2 Inlet cross-section approx. 370 x 170 mm Ijdpfx Aeyr Twfspcoig Drive motor: 45 kW

Condition: good (used), Year of construction: 1983, functionality: unexamined, machine/vehicle number: SFV 1139, overall weight: 1,000 kg, total height: 1,800 mm, total width: 500 mm, total length: 4,150 mm, power: 3.4 kW (4.62 HP), This is a vibrating conveying / vibrating fluidized bed dryer-cooler unit from SCHENCK Process (SFV series/type). Operation: The equipment uses vibration to advance the bulk product along a perforated grid (width 260 mm). Air (hot or cold) is generally injected from below to fluidize, dry, cool, or dust-remove the material during its transfer. Drive system: It is powered by two Schenck vibrating/unbalance motors (SED 180-4 type), each with a power of 1.7 kW, mounted under the chassis. They create the oscillatory movement necessary for transport via micro-jumps. Suspension: The machine body rests on large coil springs to isolate the fixed white chassis (3210x730x930 mm) from the vibrations. Isdpfezxzrpex Apcoig Materials: Constructed of stainless steel with sealed inspection ports, suitable for the requirements of the food, chemical, or pharmaceutical industries.

Year of construction: 2001, condition: used, functionality: fully functional, Used wet and dry vacuum cleaner (dust extraction system) in good condition. Extraction capacity: 1,800 m³/h. Iodozb Ipuspfx Apcjig

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), High-pressure cleaner PTC Easypower L E, similar to, but not a Dynajet, Oertzen, Falch, Woma, Kamat, or Denjet. - Operating pressure: 400 or 500 bar - Flow rate: 38 or 30 l/min - Motor: Electric 63A, 3-phase, 400V, 50Hz, 40 hp/30 kW, 1450 rpm or Electric 63A, 3-phase, 440V, 60Hz, 40 hp/30 kW, 1750 rpm - Dimensions: 1,370 x 850 x 1,030 mm - Dry weight: approx. 280 kg - High-pressure pump: HPP three-plunger pump with ceramic plungers Iiodpfxsfdzz Uo Apcjg - High-quality frame made of painted steel with corrosion protection - Covers made of stainless steel - Holder for gun with lance - Trolley with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage power supply (24V) and control unit with star-delta starter and 10 m power cable - Safety switch with thermomagnetic relay for motor protection - 4 industrial wheels - Direct water intake via self-priming pump - Stainless steel relief valve with pressure relief system and EASY START system - 100 mesh water filter with easily replaceable cartridge - Includes 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance, and flat spray nozzle 15° The following models are available: Easy Power L E 38/500 | 38 l/min, 400 bar Easy Power L E 30/500 | 30 l/min, 500 bar