Used Hera Sh 3000 X 5 for sale (94,140)

Condition: used, Year of construction: 1996, Technical details: turning diameter: 500 mm turning length: 1500 mm turning diameter over bed slide: 290 spindle bore: 71 mm turning speed range: 3 - 2800 U/min rapid speed: 10 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 22 kW Bdodpfx Aswwlvlsmrsh weight of the machine ca.: 3,2 t dimensions of the machine ca.: 3,0 x 1,6 x 2 m with Teach In controll R&D MTC-K PARAT toolpost 1 fixed steday dia. 100 mm 4 jaw face plate dia. 500 mm coolant attachment *

Condition: used, 10 t length 3500 mm width 1500 mm Bdedpfez Hqh Hox Amrsh

Condition: used, functionality: fully functional, GASPARINI PRESS BRAKE 3000 X 40 MODEL: POA 40 USED MACHINE Bodpfx Amoz Ekhkeredh INTERNAL CODE: SVR 441

Condition: used, Year of construction: 2000, Technical details: turning diameter: 800 mm turning length: 2965 mm max. turning dia. over saddle: 520 mm spindle bore: 92 mm turning speed range: 3 - 1800 U/min spindle head: Größe 11 total power requirement: 37 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 5,2 x 2,2 x 1,9 m Teach In Control MTC-K 3-jaw chuck ROTAS Dia. 400 mm Bedpfx Amjxxig Usrjdh face plate RÖHM Dia. 630 mm 4-station toolholder system PARAT 1 fixed steady coolant attachment and chip conveyor *

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t Bdedegvkdbopfx Amroh The table Professional Extreme Article no. 7D 3000x1500x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: good (used), Year of construction: 1982, machine/vehicle number: 11.809, Offer 25079 Technical specifications: - Max. working width 3100 mm - Max. cutting capacity - at 400 N/m² strength 13 mm - at 700 N/m² strength 10 mm - Cutting angle 1° 30' Bdsdev Nkdmspfx Amreh - Cutting gap adjustment via hand lever - Number of hydraulic hold-down clamps: 14 - Motorized backgauge - Electric foot switch - Front angle stop - Stroke rate 15 per minute - Drive 380 V / 22 kW - Table height 800 mm - Space required including backgauge, without front support arms - Approx. W 3400 x H 2250 x D 2150 mm - Weight approx. 12000 kg

Condition: good (used), functionality: fully functional, Year of construction: 1997, working width: 3,000 mm, sheet thickness (max.): 10 mm, Guillotine shear from manufacturer F. LLI Vimercati, model 3000 x 10 Bsdpeym Uuujfx Amrodh

Condition: excellent (used), Year of construction: 2000, Technical specifications: Working length: 3050 mm Distance between columns: 2690 mm Press force: 130 t CNC control: DELEM DA65 2 D graphic Bjdpfjwimvwsx Amrodh Adjustable backgauge Controlled axes: Y1 / Y2; X; R; I CNC table bending compensation: Wila Moducrown Hydr. Tool clamping at the top and bottom Pneumatic tool shifting Number of bending aids: 2 Installation height: 535 mm Stroke: 220 mm Thrust: 410 mm Motor power: 12.5 kW CE mark Dimensions (length x width x height): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tons Accessories: 1 set of standard tools Condition: Good condition, tools in mint condition The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 1997, condition: excellent (used), PBR T35SNC x 3000 cycle turning lathe Bdedoil Hzzjpfx Amrsh Year of manufacture: 1997 Control system: Fagor Distance between centers: 3000 mm Max. turning diameter: 630 mm Center height above the bed: 300 mm Center height above the cross slide: 165 mm Spindle bore: 105 mm Spindle speed: 2000 rpm Weight: 6200 kg Included accessories: Multifix set (without steel), chuck (see photos) + additional chuck. No guarantee is given for the accuracy, completeness, and up-to-dateness of the information provided.

Condition: used, functionality: unexamined, Year of construction: 1963, machine/vehicle number: 971W01002, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, roller (top) diameter: 400 mm, side roll diameter: 400 mm, roller length: 3,000 mm, sheet thickness (max.): 15 mm, Used HAEUSLER KRMA 3000 x 15 rolling machine for sale. Bodpfx Aozil Hfomrodh Manufacturer: CHR. HAEUSLER AG, Switzerland. Working width 3000 mm, nominal thickness 15 mm, 380 V. Serial number 971W01002. The nameplate indicates the year 1963, as well as a revision/CE marking from 2003. The machine is designed for rolling and bending sheet steel. It is sold in its current condition, and on-site inspection is recommended. The machine is also equipped for bending profiles.

Condition: excellent (used), For sale: Professional industrial extraction unit by TEKA, model STRONGMASTER BIA, designed for welding fume extraction and air pollution control. ‼️ VERY LOW HOURS – ONLY 1,550 OPERATING HOURS (this is rare for this type of equipment) ⚙️ Technical specifications: Manufacturer: TEKA (Germany) Model: STRONGMASTER BIA Capacity: 3,000 m³/h Max. negative pressure: 2,500 Pa Motor power: 1.1 kW Power supply: 400V (3PH + N + PE) Frequency: 50 Hz Rated current: 2.5 A Protection class: IP54 Control voltage: 24V Weight: approx. 130 kg 🔧 Equipment: Flexible extraction arm Industrial filter Control panel Operating hours counter Mobile chassis with wheels 🔍 Condition: Bdedpsyz Dilefx Amroh Used equipment, in good technical condition. Normal signs of use visible. ✅ Low hours – only 1,550h ➡️ Equipment is only lightly used ➡️ Significant potential for further operation

Condition: used, Year of construction: 2000, Technical details: turning diameter: 1600 mm turning length: 3000 mm Bdodjhutpvepfx Amrjh centre height: 800 mm turning diameter over bed: 1600 mm turning diameter over bed slide: 1400 mm turning dia. over face-slide: 1200 mm max. workpiece weight between centers: 20 to speeds: 5,6 -800 1/min transmission ratio: 3 spindle bore: 112 mm turret (x-stations): 8 / VDI 60 travel -x axis: 850 mm travel -z axis: 3020 mm rapid power traverse in X-and Z direction: 6 / 10 m/min power maindrive: 46 kW weight of the machine ca.: 22 to. dimensions of the machine ca.: 7,2 x 4 (3,11) x 2,7 m tech-in lathe, flatbed, tailstock, 8-pos. BARUFFALDI turret with 4 live tools, power 9kW, 4-pos. BARUFFALDI square-headed turret horizontal, C-axis, 3-jaw hydr. chuck SMW Autoblock KNCS 800/165, dia. 800mm, quick adjustment, power cylinder with 2 pressure clamping system, chipconveyor, coolant device, accessories *

Condition: used, Year of construction: 2000, centre height 400 mm centre distance 3.000 mm max. swing over bed 810 mm max. swing over facing slide 510 mm max. swing-dia. in gap 850 mm control WEILER max. workpiece weight 3.800 kg spindle diameter in front bearing 150 mm spindle bore 106 mm faceplate diameter 630 mm worktool system Parat tailstock quill taper MT 6 dia. of quill 115 mm spindle turning speed range 1 - 1.800 U/min Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. A comprehensive tool package is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition. Bjdpjy Ty Ihjfx Amrjdh Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-80 | E 80 | E80 x 3000 | E80x3000 | E 80 x 3000

Condition: like new (used), functionality: fully functional, CMU Shear 3000 x 8/10 Bdodpfxsy R Diwe Amrjh Model 2E0 6/30 Motorized Backgauge Blade Angle Adjustment Used Machine Internal Code: SER 63

Condition: good (used), Year of construction: 2000, 1 4-Bahnen-Flachbett (die 2 äusseren für Z-Schlitten; 2 innere für Reitstock) mit verfahrbarem Z-Schlitten auf äus seren 2 Führungen; Abstand 1160 mm auf inneren Führungen für Reitstock 700 mm Bettlänge mm 5300 Spitzenweite (Drehlänge zw. Futter-Höhe und Spitzen ) mm 3000 Spitzenhöhe mm 800 Drehdurchmesser über Bett mm 1600 Drehdurchmesser über Kreuzschlitten (zwischen Spitz en) mm 1400 Umlaufdurchmesser über Schlitten mm 1200 Bettbreite Führung Aussen mm 1160 Führungsbreite Reitstock MItte mm 700 Bett geschweisst; entspannt durch WIAP-Ersatzglüh- verfahren und vibrationsgedämpft nach dem pat. Verf ahren WIAP® VDSF® (Pat.Nr. 68433; Anm.4230130.30;PCT/CH95-00108; PCT/CH95-00108, PCT/CH95-1072, PCT/CH95-1073) Führungsauflagen geschliffen; Führungen austauschba r ohne Bettdemontage 1.2 Spindelstock / Hauptantrieb - festangeordnet Anzahl Spindelstöcke Stk. 1 Spindelmesskreis digital / linear Achsenlagenüberwachung keine; da Rundachse Spindelbohrung mm 112 Spindelnase A15 DIN 55021 Hauptspindelmotor: 100% ED kW 46 Nm 305 Motor 1PH7184 2NE Leistungsteil 6SN112-1AA00-0FA Hinter dem Spindelstock aufgebautes 3 Stufen Getrie be Automatisches über M Funktion programmierbares Getriebe Getriebstufe 1 RPM 5,6-120 Getriebstufe 2 RPM 16-360 Getriebstufe 3 RPM 45-800 Drehmoment Stufe 1: (100%) Nm 15236 Drehmoment Stufe 2: (100%) Nm 5290 Drehmoment Stufe 3: (100%) Nm 1904 Max Drehzahl RPM 800 1.3 Längs- und Querschlitten Stk. 1 Anzahl Querschlitten Stk. 1 Anzahl Längsschlitten digital / linear Achsmessystem am Motor Balluf Achsendlagenüberwachung (3er-Schaltpaket) RpM 2000 Achsantrieb Z-Vorschubmotor 27 Nm mm 1005 2 X Schlitten unabhängig verfahrbar Max Abstand in nen Ueber M Funktion ankoppelbar X Schlitten 1 4 Fach Rev. und X Schlitten 2 mit Angetr. Revolver kN 27 Vorschubkraft mm 6000 Max Vorschub / Eilgang Z mm 63 x 10 Vorschubart: spielfreie Kugelrollspindel mm 3020 Verfahrweg Z-Achse m / min 6* Eilgang Z-Achse (Auslegung 10 m / min) RpM 2000 Achsantrieb X-Vorschubmotor 1FT5076 18/22 Nm kN 15 Vorschubkraft mm 6000 Max Vorschub / Eilgang X mm 50 x 10 Vorschubart: spielfreie Kugelrollspindel mm 850 Verfahrweg X-Achse m / min Bdjdod D Nxkopfx Amrsh 10 Eilgang X-Achse 1.3a Reitstock manuell verstellbar; luftunterstützt für leichtes V erschieben vibrationsgedämpft mit Konus für Reitstockspitze Pinolen-Durchmesser mm 200 Pinolen-Hub mm 200 Hilfsschleppeinrichtung mit dem Z-Schlitten vorhand en Klemmung mit Mutter & Hebel / Ringmutter mit div. Gewinden im Umkreis; versetzbar 1.4 Führungen Alle Führungen sind auf geschliffenen Flächen und reibgeklebt Abmessungen mm 90 x 50 Härte der Stahlführungen ca. HRc 55 - 60 Gegenführungen kunststoffbeschichtet Automatische Zentralschmierung mit elektr. Kontroll e Die schweren Einheiten werden für den Leichtlauf un d gegen Verschmutzung luftunterstützt mit dem WIAP® Press-Air-Verfahren 1.5 Werkzeugrevolver mit angetriebenen Werkzeugen Werkzeugrevolver Baruffaldi TOER 320 Typ K18.0320.12041.B Anzahl Pos Pos 8 Zylinderschaft-Durchmesser VDI 60 Revolver Scheibe Durchmesser aussen mm 570 Revolver Scheibe Durchmesser VDI 60 mm 476 Scheiben Dicke mm 95 Angetriebene Werkzeuge Stk. 4

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 43,500 mm, total height: 3,500 mm, clearance between the columns: 2,700 mm, shelf height: 3,500 mm, number of shelf rows: 5, pallet spaces: 135 euro pallets, frame height: 3,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 43,500 mm, support length: 2,700 mm, 5 rows of pallet racking (5 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, load capacity 3000 kg. - 20 frames (RM3511 - RAL5019) - 40 base plates, shims, fastening materials - 80 floor anchors (ZZBA1210) - 60 single beams (T27114 - RAL2008) Bdjdpfjza R Ecox Amroh - 5 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - max. 20 working days after payment receipt - delivered free to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made to the entire territory of the Federal Republic of Germany; except for islands! Deliveries to EU countries are made according to individual agreements.

Condition: new, Load Weight Shelf 20000 kg Loading weight per level 2000 kg Number of load levels 2 x 5 Stk. Recommended material length 6000 mm Column width 3000 mm Shelf height 2440 mm Bdodpfx Ajfgyg Tomroh

Condition: reconditioned (used), Year of construction: 2026, functionality: fully functional, spindle bore: 140 mm, turning diameter: 630 mm, turning diameter over bed slide: 380 mm, center width: 3,000 mm, turning length: 3,000 mm, technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: in stock, under power, ready for technical acceptance. Technical specifications: - distance between centers/turning length: 3000 mm - turning diameter over bed: 630 mm - dual spindle system - turning diameter over support: 380 mm - spindle bore diameter: 140 mm - maximum workpiece weight between centers: 1500 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 18 - 1800 - range of feeds (mm/rev): longitudinal: 0.05 – 3,26 transverse: 0.25 – 1,63 - engine power: 15 kW - overall dimensions: total length: 4900 mm width: 1420 mm height: 1500 mm total weight: 3650 kg Bsdod Eafdjpfx Amrodh Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 10-140 mm, with rollers - Steady rest, 10-180 mm, with rollers - Steady rest, 140-300 mm, with rollers - MULTIFIX quick change tool post

Condition: new, Year of construction: 2025, machine/vehicle number: 0000, We offer complete revised FAT Lathes, in factories geometry, bed ground by FAT, new electrics, Bodpfx Amonqzaierjdh TUR 630 M x 2000 or TUR 630 M x 3000 TUR 630A x 3000 or TUR 630 A x 4000 spindlebore 140mm , 2 chucks 400 mm Bison Machine deliverytimes 3 - 4 Months after written order Accescories as per Customer specifications

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Bdjdeh U Rznjpfx Amreh Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Bdodpjvvi N Iofx Amroh

Condition: new, Load Weight Shelf 10000 kg Loading weight per level 2000 kg Bdjdpofgygzofx Amrsh Number of load levels 5 Stk. Recommended material length 6000 mm Column width 3000 mm Shelf height 2440 mm dimensions 3,8 x 0,9(1,35) x 2,45 m

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight 1500 kg Manufacturer: GERD WOLFF Technical Details: • Length 3000 mm • Width 1500 mm • Height 200 mm • Weight 1500 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. Bdedpfxsymf Rts Amrjh All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, spindle bore: 90 mm, turning diameter: 630 mm, turning diameter over bed slide: 630 mm, turning diameter over top slide: 380 mm, turning length: 3,000 mm, quill diameter: 90 mm, total length: 4,900 mm, total width: 1,420 mm, total height: 1,590 mm, rotational speed (max.): 1,800 rpm, rotational speed (min.): 18 rpm, overall weight: 3,700 kg, workpiece weight (max.): 1,500 kg, spindle mount: MK 6, The universal lathe FAT TUR 630M/3M has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: in stock, under power, ready for technical acceptance. Technical specifications: - distance between centers/turning length: 3000 mm - turning diameter over bed: 630 mm - turning diameter over support: 380 mm - spindle bore diameter: 90 mm - maximum workpiece weight between centers: 1500 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 18 - 1800 - range of feeds (mm/rev): longitudinal: 0.05 – 3,26 transverse: 0.25 – 1,63 - engine power: 15 kW - overall dimensions: total length: 4900 mm width: 1420 mm height: 1500 mm total weight: 3650 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants Bsdpfx Aod Eaa Ejmredh - Digital readout on 2 axes with assembly and calibration - Steady rest, 10-140 mm, with rollers - Steady rest, 10-180 mm, with rollers - Steady rest, 140-300 mm, with rollers - MULTIFIX quick change tool post

Condition: used, plate width 3000 mm Bdedpsud Iw Ujfx Amrsh plate depth 2000 mm plate height 230 mm weight of the machine ca. / t Clamping plate Dimensions: 3000 x 2000 x 230 mm T-slot dimensions: 42 x 72 x 74 (H) The images are for illustrative purposes only. More pictures will follow.