Used Heller Heller Mc 16 for sale (14,456)

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Dedicated chip conveyor with high discharge The machine can currently be inspected while powered on. Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Pedpfx Aozdpvgeahspu Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.

Condition: used, mileage: 204,500 km, power: 478 kW (649.90 HP), first registration: 04/2018, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x4, wheelbase: 4,400 mm, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, parking heater, traction control, = Additional Options and Accessories = - Remote central locking - Air suspension - Hub reduction - PTO (Power Take-Off) - Radio Pjdjyxn S Eepfx Aahspu - Rear view camera - Sun visor - Spotlights - Auxiliary heater - Toolbox = Notes = Copma 1150.8 JIB J6 Year 2018 Winch Hydraulic outriggers Hydraulic extensions 8 + 6 Scanreco radio remote control 4.52 m - 19,400 kg 6.10 m - 14,100 kg 7.72 m - 10,800 kg 9.47 m - 8,500 kg 11.22 m - 7,000 kg 13.82 m - 5,700 kg 15.20 m - 4,900 kg 17.15 m - 4,300 kg 19.52 m - 3,760 kg 22.50 m - 2,450 kg 23.90 m - 2,300 kg 25.50 m - 2,030 kg 27.20 m - 1,510 kg 29.00 m - 1,180 kg 30.90 m - 960 kg 32.80 m - 720 kg = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle 1: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Leaf spring suspension Front axle 2: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 70%; Tire tread depth right: 70%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 80%; Tire tread depth left outer: 80%; Tire tread depth right inner: 80%; Tire tread depth right outer: 80%; Suspension: Air suspension Rear axle 2: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70%; Suspension: Air suspension Weights Unladen weight: 27,417 kg Payload: 9,583 kg GVW (Gross Vehicle Weight): 37,000 kg Functional Crane: Copma Financial Information Price: Upon request Identification Model number: FH16 650 8x4 / 115 tm CRANE / KR = Company Information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB; Wouter Greutink NL-DE-GB-ES-IT; Govorim po ryccki). We make every effort to provide accurate information, but no rights can be derived from the information provided.

Condition: used, mileage: 204,500 km, power: 478 kW (649.90 HP), first registration: 04/2018, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x4, wheelbase: 4,400 mm, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, parking heater, traction control, = Additional Options and Accessories = - Remote-controlled central locking - Refrigerator - Air suspension - Hub reduction - Power take-off (PTO) - Radio - Reversing camera - Sun visor - Spotlights - Auxiliary heater - Tool box = Notes = Copma 1150.8 JIB J6 Year 2018 Winch Hydraulic outriggers Hydraulic extensions 8 + 6 Scanreco radio remote control 4.52 m - 19,400 kg 6.10 m - 14,100 kg 7.72 m - 10,800 kg 9.47 m - 8,500 kg 11.22 m - 7,000 kg 13.82 m - 5,700 kg 15.20 m - 4,900 kg 17.15 m - 4,300 kg 19.52 m - 3,760 kg 22.50 m - 2,450 kg 23.90 m - 2,300 kg 25.50 m - 2,030 kg 27.20 m - 1,510 kg 29.00 m - 1,180 kg 30.90 m - 960 kg 32.80 m - 720 kg = Further Information = Technical Information Ppjdpfozddwtex Aahju Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle 1: Tire size: 385/55R22.5; Steered; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Leaf spring suspension Front axle 2: Tire size: 385/55R22.5; Steered; Tire tread depth left: 70%; Tire tread depth right: 70%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 80%; Tire tread depth left outer: 80%; Tire tread depth right inner: 80%; Tire tread depth right outer: 80%; Suspension: Air suspension Rear axle 2: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70%; Suspension: Air suspension Weights Unladen weight: 27,417 kg Payload: 9,583 kg GVW: 37,000 kg Functional Crane: Copma Financial Information Price: On request Identification Model number: FH16 650 8x4 / 115 tm CRANE / KR = Company Information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT). Govorim po ryccki. We strive to provide accurate information, but no rights can be derived from the information provided.

Condition: excellent (used), mileage: 167,450 km, power: 120 kW (163.15 HP), first registration: 12/2016, fuel type: diesel, fuel: diesel, color: white, emission class: euro6, total length: 7,230 mm, total width: 1,990 mm, total height: 3,400 mm, Year of construction: 2016, operating hours: 291 h, Equipment: ABS, AdBlue, USB port, air conditioning, airbag, central locking, electric window regulation, power assisted steering, power mirror, soot filter, traction control, trailer coupling, Technical information Number of cylinders: 4 Engine capacity: 2.143 cc Weights Empty weight: 3.810 kg Carrying capacity: 1.190 kg GVW: 5.000 kg Functional Mast: sliding Lifting capacity: 200 kg Lift height: 1.400 cm Condition Technical condition: very good Visual appearance: very good Damages: none Pedey R Txbopfx Aahopu Identification Registration number: 70-BHV-7 Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - 230V power connection - Climate control - Heated door mirrors - Inverter 12/230V - Leaf spring suspension - Particulate filter - PTO - Radio/Cd/Audio system - Reversing camera - Side Door Right - Tachograph - Twin wheel axle = Remarks = VIDEO: Very nice and neat Mercedes Sprinter 516 CDI 163 HP Euro 6 Custers Aerial platform 14 meters working height Remote control and basket control (from the basket or with remote control) 283 working hours on PTO and 8 hours on electric motor 167000 KM (Last service and inspection at 163000 KM) GVW 5000 KG Technically and optically in very good condition

Condition: good (used), functionality: fully functional, Year of construction: 2011, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 4,000 W, punching force: 22 t, Equipment: CE marking, nozzle changer, safety light barrier, Standard Equipment: Machine - Work area 3050 x 1550 mm - Robust, easily accessible C-frame - Coordinate guidance for highly precise machining - Linear magazine with 21 tool positions and 4 clamping claws - Drives with maintenance-free three-phase motors - Repositioning device with programmable clamping system - Foot pedal for closing clamping claws - Ball tables - Two parts collection containers - Chip container - Initial oil fill - Transport and assembly device - ContourLine - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - Quick flap for laser parts 500 x 500 mm including sensor for part chute - Liftable laser cutting support - Slug detection TRUMPF Laser - Laser TruFlow 2700 with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control system TASC - Enclosed beam guidance - Beam pipe ventilation with compressed air Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device UTI with bus connection - ControlLine Programming - Extended workshop programming (TruTops via network access) Punching Station Ppodpfoza A Hljx Aahsu - Electro-hydraulic punching head - Rotating mono-tool holder - Tool length compensation - Programmable clamping system with manually adjustable clamping force - Stroke counter for punch - Spray lubrication for punch - Punch slug extraction - Deflection detection - Flap for punching parts 500 x 500 mm including sensor for part chute - Reaching the fill level in the punching console - Level monitoring for thread forming and tool lubrication Control System - TRUMPF control system based on Rexroth IndraMotion MTX - External control panel with 15" TFT touchscreen - Hard drive with 160 GB storage capacity - Integrated technology data - Teleservice via internet - Integrated e-shop - Programmable cutting gas pressure - Automatic shutdown - Production plan Data Transfer - Network connection RJ45 and USB interface Safety - CE marking - Dual light curtains - Monitoring system for gas pressure, temperature, coolant, among others - Quick stop - Protection against scattered radiation - Compact dust extraction system - TruFlow 4000 including LensLine - Automatic nozzle changer - MultiTool function - MultiShear function - MultiBend function - Thread forming function - Deburring and rolling technology - Active die - StripLine - Adaptive stroke calibration - Spray lubrication for die - 4 individually opening clamping claws - Repositioning cylinder - Vibration-damped mounting - Chip conveyor with tipping container - Brush tables with loading and unloading assistance - Blowing device for small parts Automation: SheetMaster - Suction frame 3000 x 1500 mm with 36 suction cups (y-axis = 400 mm) - Adjustable suction rails (v-axis = 120 mm) - Peeling suction - Vacuum sensor for each suction cup - Sheet thickness sensor for double sheet detection - Automatic clamping claw closing on machine - Central lubrication - Main-time parallel loading and unloading of SheetMaster - Unloading monitoring GripMaster special arrangement 4m: - Scrap grid tongs with sensor - Scissor lift table 400 mm

Condition: good (used), Technical data for pallet racking upright: Racking system: Stow Type: Pal Rack NS Scope of delivery includes: 01x pallet racking upright, used Material colour: grey Frame profile: PLFB 16 Profile dimensions: P 100 x 65 x 2.5 mm Incl. horizontal and diagonal braces, base plates The uprights are pre-assembled (bolted truss) Height: 8,500 mm Depth: 1,100 mm Psdpfew Eanrjx Aahopu Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is offered for collection only. If delivery or shipping of this item is required, additional costs will apply and can be provided on request depending on the place of delivery and scope of supply.

Condition: used, mileage: 292,489 km, power: 120 kW (163.15 HP), first registration: 08/2018, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, loading space volume: 13 m³, loading space length: 3,400 mm, loading space width: 2,035 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, tail-lift, Vehicle No. for customer inquiries: 178 ----Refrigeration unit: * Carrier Viento 350 * Deep-freeze box body * Refrigeration during transit * Refrigerant: R452A * Cargo compartment dimensions: L: 3,400 mm W: 2,035 mm H: 1,900 mm * Payload: 650 kg Pedpfx Aoxrh Dreahepu ----Special equipment: * Automatically controlled air conditioning (Tempmatic) * 4x4 * Drive type: selectable all-wheel drive * Tail lift BÄR/Trösch * Hill-start assist * 13-pin trailer socket * Audio system Audio 10 (radio with CD player) * Exterior mirrors without integrated indicator * Outside temperature display * Additional (reinforced) battery * Side-mounted front indicators * Overhead control unit with reading light for driver/passenger * Fuel filter with water separator * Fuel tank: main tank 100 l * Steering wheel (mechanically adjustable steering column) * Programmable special module * Front mud flaps * Seats in cab: driver’s comfort seat * Rear stabilizer * Reinforced front stabilizer * Cut-off relay for additional battery * Fleece battery 95 Ah * Heat-insulating glazing (front windscreen with top band filter) * Additional (air) heater, electric ----Standard equipment: * Adaptive brake light * Driver’s airbag * Anti-lock braking system (ABS) * Washer fluid level indicator * Electrically adjustable and heated exterior mirrors (both sides) * Battery 74 Ah * Brake assist * Brake system with ABS+ASR * Headlining in cab * Electronic Stability Program (ESP) * Electric windows, front * 6-speed gearbox - TSG (Eco Gear) * Lockable glove compartment * Body/Construction: Standard dropside platform * Headlight range adjustment * Truck homologation * Model update * Engine 2.1 L - 120 kW CDI CAT * Particulate filter * Wheelbase 3665 mm * Low emissions according to Euro 6 emissions standard * Power steering * Seatbelt system with warning device (driver’s side) * Seat covers/upholstery: Lima fabric * Seats in cab: passenger seat with armrest * Seats in cab: adjustable passenger seat * Seats in cab: driver's seat with armrest * Steel wheels 6.5x16 * Maintenance interval display Assyst * Immobilizer * Central locking with remote control * Perm. gross vehicle weight: 3.50 t ----Technical Data: * Wheelbase: 3,665 mm * Cargo compartment dimensions: L: 3,400 mm W: 2,035 mm H: 1,900 mm * Payload: 650 kg * Tire size: 235/65 R16C * Tire tread: approx. 20% summer tires ----17,850.- Euro net plus VAT * For export to third countries or EU, a deposit is required. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible – please ask us for your individual offer! * We are happy to accept your used vehicle in part exchange! * Financing/leasing also possible in difficult cases * This description serves purely for general identification of the vehicle and does not constitute a warranty in the legal sense of sales law. * The information provided does not claim to be complete. The details/descriptions/images are non-binding and do not constitute guaranteed characteristics. * We accept no liability for errors and obvious mistakes. * The buyer is obligated to independently verify the condition and specification of the vehicles prior to purchase. * Price changes, typing errors, mistakes, and prior sale reserved. * Dear customer, please understand that, due to the age and mileage, we preferably sell this vehicle to commercial customers.

Condition: used, mileage: 452,537 km, power: 175 kW (237.93 HP), first registration: 03/2012, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: white, gearing type: semi-automatic, emission class: euro5, loading space length: 5,600 mm, loading space width: 2,480 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, crane, soot filter, Mercedes-Benz 1624 Atego Flatbed + Amco Veba Crane 4x2 Suspension: Leaf-air Wheelbase: 4.50 m Payload: 6,830 kg Amco Veba Crane Model: V815 3S 4x hydraulic extensions 2x hydraulic stabilizers 1x remote control 5th and 6th control units Special features: - Storage compartment on engine tunnel - Audio system: CD radio - Electric windows - Urea (AdBlue) tank: 35 liters - Rear lights for mounting tail lift - Fuel tank: 180 liters, plastic - Roof air deflector - Mercedes-Benz PTO 2C - Mercedes-Benz PTO 60-2C with MPA - Programmable special module - Frame extension – rear overhang - Side-mounted spare wheel carrier - Reverse warning buzzer (external alarm) - Cab seats: Comfort driver's suspension seat - Rear mudguards with splash guards - Heat-insulating glazing Additional equipment: - Axle configuration: 4x2 - Electrically adjustable and heated exterior mirrors - 115 Ah battery - Cockpit distributor - Roof hatch (steel) - Cab: S (short) - Suspension: leaf/air - 80 A alternator - 6-speed gearbox - Type: G 60-6 - Urea (AdBlue) tank: plastic Ppedpfx Aasy Hyp Sehsu - Rear axle: H 4, ring gear 368 - LS 6 / LS 8 power steering - Interior filter: pollen filter - Body/chassis: chassis frame - Atego 2 model update - Engine: 6.4 liters – 175 kW diesel (OM 906 LA) - Engine start/stop system - Engine brake with constant throttle - Wheelbase: 4760 mm - Disc brakes - SCR system (AdBlue technology) - Side underrun protection - Cab seats: fixed single passenger seat - Rear axle stabilizer - Fixed rear underrun protection - Front underrun protection - Immobilizer - Perm. gross vehicle weight: 16.00 t We are also happy to assist you with financing/leasing through our partners. All information without guarantee. Subject to errors and prior sale.

Condition: used, mileage: 294,697 km, power: 115 kW (156.36 HP), first registration: 12/2017, fuel type: diesel, overall weight: 7,490 kg, color: orange, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2017, Equipment: ABS, electronic stability program (ESP), Body: AMC GmbH Coswig * Model: Master, Year: 2017 * Permissible operating pressure – Compartment I & II: 0.5 bar * Test pressure: 0.65 bar * Capacity: Compartment I: 2,500 liters – Compartment II: 550/550 liters Equipment: * Cab: S ClassicSpace, * Automatic transmission, * Driver's seat: Comfort air-suspended seat, * Trailer coupling: Ball head, 3.5 t * Suspension: Leaf / air, * PTO: MB 60-2C with MPA, * Rear window, * Manually operated sliding roof (steel), Safety/Environment: * Rear axle differential lock, * Driver assistance system: Lane keeping assist, * Rear axle stabilizer reinforced (for extremely high load), * Emissions standard EURO 6, Ppjdpfxjxwf Uro Aahou Miscellaneous: * First delivery in Germany, * 1 previous owner, * Engine: 5.1 L – 115 kW diesel (OM 934), * Gross vehicle weight: 7.49 t * Payload: 2.11 t according to vehicle registration * COC paperwork available Since 1972 your reliable partner for all automotive and commercial vehicle needs located in 28832 Achim at Bremer Kreuz. NutzfahrzeugZentrum Behnke always keeps approx. 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special rates. Upon request, we are happy to provide you with a custom offer! Trade-ins of your commercial vehicle or construction machine are welcome. If a new TÜV inspection is required, we can provide an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle is possible by our external partners at an additional charge. The information provided in advertisements, online, price tags, and pictures is non-binding and does not constitute guaranteed features. The seller assumes no liability or warranty for typographical or data transmission errors. Listed equipment must be verified separately if necessary. Subject to prior sale and errors.

Condition: used, mileage: 311,734 km, power: 115 kW (156.36 HP), first registration: 04/2015, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, loading space volume: 35 m³, loading space length: 6,090 mm, loading space width: 2,480 mm, loading space height: 2,350 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Vehicle No. for customer inquiries: 230 ----Refrigeration Unit: * Carrier Xarios 500 * Reefer box * Diesel + Electric * Standby and on-the-go cooling * Cooling tested and OK!! * Cargo area dimensions: L: 6,090mm W: 2,480mm H: 2,350mm * Payload: 2,330kg ----Special Equipment: * Audio System: CD Radio (Bluetooth) * Battery 165 Ah * Standard Cab * Aluminum Air Tank * Fleetboard Vehicle Computer * 12.7 cm Info Display with Video Function * Communication Interface * Light Alloy Wheels 6.00x17.5 (DAEWOO) * Roof Air Deflector (lockable, without base panel) * Engine Brake * Fog Lights * Acoustic Reverse Warning (external warning signal) * Tailgate Switch * Rear Cross Member for Tow Hitch * Seats in the Cab: Driver's Seat with Armrest * Seats in the Cab: Passenger Seat, Comfort Suspension Seat * Seats in the Cab: Driver's Seat, Comfort Suspension Seat * Seats in the Cab: Center Seat with Seat Belt * Reinforced Rear Axle Stabilizer (for extremely high load) * Rear View Camera * Toll Collection System Preparation * Central Locking with Remote Control ----Standard Equipment: * Emission Standard EURO 6 * Axle Configuration: 4x2 * Front Axle Load: 4.1 t * Approach/Front Mirrors * Exhaust Tailpipe to Vehicle Center * Exterior Mirror, electrically adjustable, left * Electronic Braking System (EPB) with ABS+ASR * Low Air Pressure Unit * Single-Step Entry * Driver Assistance System: Stability Control Assistant * Cab: S ClassicSpace * Cab Variant: ClassicSpace * Suspension: Leaf / Air * Front Springs: 3.4 t * Speed Limiter (Cruise Control) * Gearbox 6-speed - Type: G 71-6 * Urea Tank (AdBlue): 25 L * Manual Lifting Roof (Steel) * Rear Axle Differential: 325 * Body/Structure: Chassis * Fuel Tank: 120 L * Engine 5.1 L - 115 kW Diesel (OM 934) * Engine Compartment Encapsulation * Wheelbase 4220 mm * Transmission Mercedes-Benz PowerShift * Disc Brakes Front and Rear Axle * Seat Upholstery: Fabric * Tachograph / EC Control Unit * Daytime Running Lights, automatic * Fixed Rear Underrun Protection * Lateral Underrun Protection, weight-optimized * Immobilizer * Permissible Gross Weight 7.49 t Technical Data: * Wheelbase: 4,220mm * Cargo area dimensions: L: 6,090mm W: 2,480mm H: 2,350mm * Payload: 2,330kg Psdozbwfropfx Aahspu * Tire Size: 215/75 R17.5 * Tire Tread: approx. 80% Rear ----German Vehicle! * €12,900 Net plus VAT * For export to third countries or EU, a deposit will be retained. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly take your used vehicle in part exchange!! * Financing/Leasing also possible in difficult cases * This description serves only for the general identification of the vehicle and does not constitute a guarantee in the legal sense. * The information does not claim to be complete. The information/descriptions/images provided are non-binding and do not serve as guaranteed characteristics. * We assume no liability for errors and obvious mistakes. * The buyer is obliged to independently verify the condition and equipment of the vehicles before purchase. * Subject to price changes, typos, errors and prior sale * Dear customer, please understand that we

Condition: new, Year of construction: 2026, control type: CNC control, actuation type: hydraulic, controller manufacturer: ELGO, controller model: ELGO P40T 5,7 ", working width: 4,000 mm, stroke rate (min.): 12 1/min, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, back gauge adjustment: CNC-controlled, power: 30 kW (40.79 HP), warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, HGM B16-4000 – 16 mm x 4000 mm Hydraulic Guillotine Shear The HGM B16-4000 Hydraulic Guillotine Shear, manufactured in Turkey by CRONOSSTECH, is designed for heavy industry, steel construction, shipbuilding, machine manufacturing, and high-capacity sheet metal processing applications, offering a 16 mm sheet metal cutting capacity and a 4000 mm cutting length. It provides precise and efficient cutting thanks to the ELGO P40T touch-screen CNC control unit, automatic blade gap adjustment system, motorized back gauge system, and Rexroth hydraulic system. Standard Features Throat Depth: 250 mm Cutting Length: 4000 mm Distance Between Columns: 4580 mm Cutting Capacity: 16 mm ELGO P40T 5.7” Touch-Screen CNC Control Unit 5.7” TFT touch screen Manual operation mode Single-piece processing Program memory Up to 2A digital outputs Automatic calculation of blade gap, cutting angle, and pressure adjustment based on material Automatic cutting program Back sheet support system with RTS function Automatic Blade Gap Adjustment System Automatic calculation and adjustment based on the thickness of the sheet to be cut Programmable Back Gauge Retraction System Automatic lifting for parts larger than 1000 mm Motorized NC Controlled Back Gauge on X-axis X-axis travel distance: 1000 mm Speed: 150 mm/s Accuracy: ±0.05 mm Steel body Hardened ball screw spindle Front Support Arms 1000 mm length Ruler T-slot Retractable stopper Retractable Front Finger Protection System Ppsdpfxjzbqzye Aahju 1000 mm retractable front protection guard Upper Blade 2 cutting edges 450 N/mm² capacity Lower Blade 4 cutting edges 450 N/mm² capacity Foot Pedal with Emergency Stop Rear Safety System (EOS2E 2BX) 2 laser beams Type 2 – SIL1 safety level 510 mm monitoring height 3 ms response time IP65 / IP67 protection class Shadow Light Cutting Line Ball Transfer Table Schneider or Siemens Electrical Equipment (400V / 50Hz) Premium Front and Rear Guarding Rexroth Hydraulic System Energy-Saving Standby Mode Optional Features Pneumatic Sheet Support System (Type 2 – 4-Position RTS Function) 4-position pneumatic support system Stable support for large-sized sheets Reduces sheet bending and deformation RTS (Return To Sender) function Increases operator comfort and safety Extended X-Axis Back Gauge 1250 mm 1500 mm Extended Front Support Arms 1500 mm 2000 mm 3000 mm Full-Length Retractable Front Protection System Technical Specifications Cutting Capacity (450 N/mm²): 16 mm Cutting Capacity (700 N/mm²): 10 mm Cutting Length: 4000 mm Cutting Angle: 0.5° – 3.0° Number of Pressure Cylinders: 18 Cutting Speed / Fast Mode: 6 / 12 hpm Distance Between Columns: 4580 mm Table Height: 1010 mm Table Width: 700 mm Throat Depth: 250 mm Back Gauge Movement (X-axis): 1000 mm Machine Length: 5980 mm Machine Width: 3750 mm Machine Height: 2825 mm Oil Tank Capacity: 390 L Motor Power: 30 kW Machine Weight: 21.5 tons This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Condition: used, Technical characteristics: HORIZONTAL MACHINING CENTER AUTOFEED 8 PALLETS Ppsdpj Dvlxsfx Aahsu 140 TOOL ISO50

Year of construction: 1975, condition: good (used), 11 rolls, Ø 130 mm strip width: max. 1.900 mm strip thickness: max. 10 mm Podednztkopfx Aahepu

Condition: used, Year of construction: 1955, saw blade diameter 70 - 230 mm sawblade width 12 mm hole of sawblade 10 - 50 mm grinding wheel diameter 120 mm grinding wheel width 6 mm Ppjdpfx Aajtqqk Nohsu grinding wheel hole diameter 32 mm no. of teeth 30 - 400 total power requirement 0,33 kW weight of the machine ca. 350 kg dimensions of the machine ca. 0,80 x 0,70 x 1,70 m

Condition: good (used), Year of construction: 2019, operating hours: 19,000 h, functionality: fully functional, 2019 HELLER H6000 CNC Double-Pallet Horizontal Machining Center CNC horizontal machining center with double pallet Low operating hours, single-shift machine, excellent condition Manufacturer: HELLER Model: H6000 Year of manufacture: 2019 Machine type: CNC horizontal machining center Pallet system: Double pallet / 2-pallet system Serial number: MXXXXX (upon request) Pallet size: 630 x 630 mm Maximum pallet load: 1,000 kg Maximum workpiece height: 1,200 mm Travel distances: X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 1,000 mm B-axis: 360° / 0.001° indexing Rapid traverse speeds: X-axis: 50,000 mm/min Y-axis: 50,000 mm/min Z-axis: 75,000 mm/min B-axis: 25 rpm Feed forces: X-axis / Y-axis: 15,000 N at 40% duty cycle Z-axis: 20,000 N at 40% duty cycle Spindle speed range: 5 – 6,000 rpm Spindle drive power: 60 kW at S6 / 40% duty cycle Maximum spindle torque: 2,292 Nm at S6 / 40% duty cycle Ppedpfx Ajy S S Hyeahsu Spindle taper: HSK 100A Automatic tool changer: 50 positions Maximum tool diameter: 280 mm Maximum tool length: 600 mm Maximum tool weight: 25 kg Condition: The machine is in top condition, has low operating hours, and can be inspected immediately. The machine is available for short-term delivery.

Condition: good (used), Year of construction: 2017, travel distance X-axis: 1,600 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 820 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 18,000 m/min, controller model: HARTROL PLUS 1 (MITSUBISHI), table width: 820 mm, table length: 1,750 mm, table load: 2,200 kg, number of slots in tool magazine: 40, Hartford HCMC-1682 Vertical Machining Center – Year 2017 The Hartford HCMC-1682 vertical machining center represents an ideal solution for medium and large-size mechanical machining operations that require high structural rigidity, reliability, and precision. Thanks to its robust construction and ISO 50 spindle, this machine is particularly suitable for roughing and finishing operations on steel, cast iron, and high-strength materials. Equipped with a Hartrol Plus 1 (Mitsubishi) CNC control, the machining center offers generous travels of 1,600 x 820 x 820 mm, allowing the machining of large-size components with a weight of up to 2,200 kg on the table. The two-range speed spindle, with a power of up to 18.5 kW and a maximum speed of 6,000 rpm, guarantees high chip removal performance and considerable torque at low speeds. The machine is equipped with a 40-position automatic tool magazine, through-spindle high-pressure coolant, chip conveyor, and a dedicated spindle cooler, making it ready for intensive and continuous production. Main technical features: Hartrol Plus 1 (Mitsubishi) CNC control X/Y/Z axis travels: 1,600 / 820 / 820 mm Table: 1,750 x 820 mm Table load capacity: 2,200 kg ISO 50 spindle Spindle speed: 6,000 rpm Spindle power: 15 / 18.5 kW Tool magazine: 40 positions Rapid traverse rates X/Y: 20 m/min Ppjdpfx Aszaapkjahou Rapid traverse rate Z: 18 m/min Included accessories: Chip conveyor Coolant tank with pumps High-pressure coolant through spindle Spindle coolant cooler Manuals, electrical diagrams, and CE declaration

Year of construction: 1999, condition: good (used), Kolb Double-Paddle Mixer, Model 16-17. This double-trolley mixer is used for mixing candied fruit. The machine is in perfect working order. Ppsdpfx Aoy Uvx Ssaheu

Condition: good (used), functionality: fully functional, Year of construction: 2019, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser hours: 980 h, laser power: 4,000 W, punching force: 22 t, Equipment: CE marking, nozzle changer, safety light barrier, Machine - C-frame - Coordinate guide - Linear magazine with 25 stations for clamps and tools - 4 x hydraulic clamps - Drives with maintenance-free three-phase motors - Repositioning system with programmable hold-down - Flap for punched parts 500x500mm incl. sensor - Foot pedal for closing clamps - FocusLine - NitroLine - FastLine - FlyLine - Additional XP and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500x500mm incl. sensor - Liftable laser cutting support TRUMPF Laser - TruFlow 4000 laser incl. LensLine and optimized standby - High-frequency excitation - Fine filtration of compressed air for beam tube ventilation - Closed beam guidance Cutting Head - Lens cutting head with 170mm focal length - Universal quick-change device for cutting head - LensLine - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch slug extraction - Calculation of fill level in the punching console - Stroke counter for punches - Spray lubrication for punches - Fill level monitoring for tool lubrication - Stripper position measuring system with sheet thickness measurement function Control System - TRUMPF control based on Rexroth IndraMotion - Touch panel with 19" TFT color display - Integrated technology data - Programmable cutting gas pressure - Remote Support interface - Automatic shut-off with wake-up function - Production planner Functions - PlasmaLine Data Transmission - USB interface - RJ-45 network interface - Wireless Operation Point Safety - CE marking - Two-beam safety light barrier - Monitoring system for gas pressure, temperature and cooling water - Emergency stop for drives - Warp detection - Protection against stray radiation Extended Standard Equipment: - Network installation via Remote Support - Chiller (water-air) - Compact extraction system - 1st locating pin (inside right) - 2 finished parts containers - Chip container - 40 used RTC cassettes + die plate Punch Quality Package - MultiShear - Deburring and rolling technology - Adaptive stroke calibration - StripLine Forming Package - Thread forming incl. thread former breakage control - Marking/fast beading - MultiBend - Height-adjustable clamps - Automatic nozzle changer - MultiTool - Engraving - Smart Punch Monitoring with sheet format detection - 4 individually openable clamps - Automatic clamp closing with mechanical sensor zero stop - Repositioning cylinder - Vibration-damped installation - Chip conveyor with tilting container - Foot pedal start incl. rear-view mirror - Brush tables with loading and unloading support - Ejector unit for small parts - CO2 extinguishing system for compact extractor - Connection piece for exhaust air duct of compact extractor MobileControl App SheetMaster (AK08) UF - Loading station with spreader magnet - Simultaneous loading and unloading during main time - Peeling system incl. positioning aid for oversize formats - Additional positioning aids for medium format - Additional positioning aids for large format Podpfx Ajy Sappoahepu - First add-on package with 9 suction cups (incl. vacuum ejector) - Unloading monitoring for laser parts - Loading of blanks GripMaster 4000 x 1500 mm SortMaster Pallet 4 pallets longitudinal ToolMaster Linear 54 stations with simultaneous tool setup during main time - Safety devices for warehouse connection incl. 2nd light barrier circuit - Warehouse interface

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 60,000 m/min, rapid traverse Z-axis: 60,000 m/min, table width: 1,000 mm, table length: 1,250 mm, table load: 3,000 kg, number of slots in tool magazine: 180, Work piece up to 1530 x 1295 x 3500 Kg Tool size up to 650 mm length and 30 Kg Tool size up to 400 x 250 mm and 30 Kg Extende feed rate up to 15 kN-100% ED Coolant Filtration     BLUM Laser NT 3D Quick ser MPC protection 3D Measuring probe DXF Import   Tool package 180 Tool HSK-100A 2 x Cast iron angle plates 1500 mm   15000 Working hours 1e owner machine  X - Travel: 1600mm Y - Travel: 1100mm Z - Travel: 1400mm B-Axis indexing: 360000° Table Length: 1250mm Table Width: 1000mm Table load: 3000 Number of pallets: 2 Feed rate X-Axis: 60000mm/min. Feed rate Y-Axis: 60000mm/min. Feed rate Z-Axis: 60000mm/min. Ppjdjx Sqptspfx Aahju Spindle Taper: HSK-100ISO/Bt/Mk Power on spindle: 52kW Speeds / ranges: 12000Rpm ATC / revolver: 180 Number of controlled axis:4 Length: 9170mm Width: 6320mm Height: 3969mm Weight: 39500kg

Condition: used, Year of construction: 1999, x-travel 610 mm y-travel 405 mm z-travel 510 mm table surface area 760 x 400 mm spindle taper SK 40 spindle turning speed - stepless 80 - 8000 U/min spindle drive 7,5 kW max. torque on the spindle max. 142 Nm Ppjdjvh Nbuspfx Aaheu feeds 3,0 - 7600 mm/min rapid motion -longitudinal/cross/vertical 24 / 24 / 15 m/min distance table / vertical spindle max. 600 mm table load 350 kg no. of tools in magazin 24 workpiece diameter at full load 80 mm tool length - max. 300 mm weight of tools max. 6,8 kg control ULTIMAX SSM total power requirement 18 kVA weight of the machine ca. 4,1 t Accessories: 2 tool fixtures SK 40, 3-jaw chuck RÖHM, chip conveyor, coolant

Condition: good (used), 16 Bucher hydraulic pumps in a package. 8 x 5-H2-40 1,450 rpm 40 l/min Weight 47 kg. 8 x 2-H2-4 1,450 rpm 4 l/min Weight 7 kg Psdswg Hlgepfx Aahepu

Condition: like new (used), Year of construction: 2006, Technical data Manufacturer: KENT Model: VK 1600MC Year : 2.006 Serial number: 2200139 Control unit: FANUC 18 iMD Location: Tabaza (Asturias - Spain) Table Dimensions Working Surface: 1700 x 810 mm. T-Slot ( Size x Number x Center distance): 22 x 5 x 160 mm. Max. Table Load: 2.000 kg. Travel X axis traverse: 1600 mm. Y axis traverse: 815 mm. Z axis traverse: 815 mm. Distance from Spindle nose to table: 220 ~ 1035 mm. Distance from Spindle center to Column: 865 mm. Spindle Taper: BT50 Spindle speed (Gear type): 30 – 6000 rpm. ZF GEAR BOX (2 ranges): Yes Max. Tool Weight: 15 kg. Ppedpsqwyzfofx Aahsu Max. Tool Size (Diameter x Length): 125 x 300 mm. ATC Max. tool Ø x L: Ø125 x L250 Max. tool weight: 15 kg. Number of tools: 32 Feedrates Cutting Feed Rate: 1 – 10.000 mm./min. Rapid Traverse: 18/18/18 mm./min. Motor Spindle Drive Motor (30 Min Rating): 15/18,5 Kw. X,Y,Z Axis Drive Motor: X: 5.5 | Y: 5.5 | Z:5.5 Coolant Pump CTS: One air & two coolants – 4 bar. + 6 bar / 20 bar Weight and dimensions Machine weight: 16.150 kg Machine dimens: 4.488 x 3.448 x 3.250 mm. Base space: 5.000 x 3.500 mm.

Condition: refurbished (used), battery capacity: 750 Ah, battery voltage: 48 V, total height: 625 mm, total length: 827 mm, total width: 735 mm, Tested forklift battery for your truck – 48V 6PZS 750Ah – DIN A + 1-year warranty + Incl. Aquamatic system + Incl. end cell cables & REMA 320 connector (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Podjy Rnndjpfx Aahjpu Length 827 mm Width 735 mm Height 625 mm Weight: approx. 1,020 kg Suitable for the following models and more: Linde E15S-355-00 Linde E16 - 324-00 Linde E16 - 386-00 Linde E16L - 386-02 Linde E18 - 355-00 Linde E18 - 386-02 – lateral change Linde E18C - 355-00 Linde E18 L - 386-00 Linde E18 L - 386-02 – lateral change Linde E20 L - 386-00 Linde E20 L - 386-00 – lateral change Linde E20 PL - 386-00 Linde E20 PL - 386-02 – lateral change Linde R14 X - 116-03 – frontal change Linde R14 X HIGH - 116-00 – frontal change Linde R16X - 116-00 Linde R16X - 116-00 – frontal change Linde R16X- 116-03 – frontal change Still R20-16 Still R20-18 Still RX 20-18PL Still RX 20-20 Crown SC 5360-2.0 Jungheinrich EFG Series Jungheinrich EFG 216 Jungheinrich EFG 218 Jungheinrich EFG 220 Jungheinrich EFG 222 Jungheinrich EFG 316 Jungheinrich EFG 318 Jungheinrich EFG 320 Jungheinrich EFG DF 16L Jungheinrich EFG V 20 Jungheinrich EFG VAC 320 Toyota 7FBEF16 Toyota 7FBEF18 Toyota 7FBEF20 Toyota 8FBE16T Toyota 8FBE18T Toyota 8FBE20T Blgkcdacpxv Toyota 8FBEK18T Toyota 8FBMT18 Toyota 8FBMT20 Toyota/BT CBE 2.0 Caterpillar EP 16/20 Caterpillar EP20PN Cesab B320A Hyster J1.6XNT Hyster J1.8XNT Hyster J2.0XN LOC E20 Mitsubishi FB16PNT Mitsubishi FB20PN Mitsubishi FB20PNT Steinbock-Boss KE20 Common battery sizes available on request. Transport available.

Condition: refurbished (used), battery capacity: 625 Ah, battery voltage: 48 V, total height: 625 mm, total length: 827 mm, total width: 627 mm, Tested Forklift Battery for Your Truck - 48V 5PZS 625AH - DIN A + 1-year warranty + Includes aquamatic water filling system + Includes end connector & REMA 320 plug (other plugs can be installed upon request) + Capacity: minimum 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Ppsdpfx Ajy Rnmmeahou Dimensions: Length 827 mm Width 627 mm Height 625 mm Weight: approx. 860 kg Suitable for the following models and more: Linde E15 S- 355-00 Linde E16 - 324-00 Linde E16 - 386-00 Linde E16 - 386-02 - side battery change Linde E16 C - 1275-00 Linde E16 C - 335-00 Linde E16 L - 335-00 Linde E16 P - 1275-00 Linde E16 P - 386-00 Linde E16 P - 386-02 - side battery change Linde E18 - 335-00 Linde E18 - 386-00 Linde E18 - 386-02 - side battery change Linde E18 C - 335-00 Linde E20 L - 386-00 Linde EG 16-1275-02 - side battery change Linde EG16 H -1275-02 - side battery change Linde EG16 P -1275-02 - side battery change Linde EG16 PH -1275-02 - side battery change Linde EG20 PH -1275-02 - side battery change Linde T30 R - 143-00 Still R20-15 Still R20-16 Still R20-18 Still RX20-15 Jungheinrich EFG Series Jungheinrich EFG 18 Jungheinrich EFG 216 Jungheinrich EFG 216 k Jungheinrich EFG 218 Jungheinrich EFG 218 k Jungheinrich EFG 316 Jungheinrich EFG 316 k Jungheinrich EFG 318 Jungheinrich EFG 318 k Jungheinrich EFG DF 16 Jungheinrich EFG DF V16 Toyota 7FBE15 Toyota 7FBEF15 Toyota 8FBEK16T Toyota 8FBEK18T Toyota /BT CB 1600 Crown SC1018 Crown SC3240 -1.8 Crown 5340 - 1 Caterpillar EP 16CPNT Caterpillar EP 16CPN Caterpillar EP 16C Caterpillar EP18CPNT Cesab Blitz 416 Daewoo B16X-5 Clark GEX 18/20S Clark GTX18 Clark GTX20S Doca7H Hyster J1.8XNT Komatsu FB18M Mitsubishi FB16 Nichiyu FBT15P Nichiyu FBT15P-75 Nissan G1N1 TX16 OM-Pimespo-Fiat XE 18 Yale ERP 16VT Standard battery sizes available, please inquire. Transport available.

Condition: refurbished (used), battery capacity: 625 Ah, battery voltage: 48 V, total height: 630 mm, total length: 1,025 mm, total width: 525 mm, Tested forklift battery for your truck – 48V 5PZS 625Ah – DIN B + 1 year warranty + incl. Aquamatik (automatic water filling system) + incl. end discharge connector & REMA 320 plug (other plug types available on request) + Capacity: min. 90–100% (C5 capacity report is provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 525 mm Height 630 mm Weight: approx. 890 kg Suitable for the following models and more: Still FM 20 Ppsdpfx Aey Rnmgjahsu Still R 20-15 Still RX 20-14 Still RX 20-15 Still RX 20-16 Still RX 20-18 Still RX 20-20 Still RX 20-20 P Jungheinrich EFG Heli CPD 18 Mitsubishi FB18KT Utilev UT20PFH Common battery sizes available, please enquire. Transport possible.