Used Hegla Ecolam Vsg-37 for sale (3,095)

Condition: used, first registration: 08/1978, Year of construction: 1978, LAG 37 m³ slurry trailer with 6 chambers ! Newly refurbished for approx. €10,000, new brake system, new 3rd axle, new electrical system, new air suspension! • Aluminum body • 37,200-liter capacity • 6 chambers of 6,200 liters each • 6 dome covers • Direct discharge at the rear! • 3 x BPW air-suspended axles • Drum brakes • 385/65 R 22.5 tires - New MOT! - Ready for use! Kdsdpfx Aowmpatjbfon Subject to errors and prior sale!

Condition: used, functionality: unexamined, power: 27.38 kW (37.23 HP), gearing type: hydrostat, fuel type: gasoline, overall weight: 670 kg, axle configuration: 2 axles, Year of construction: 2008, operating hours: 69 h, LASKI F-500 H tree stump grinder / 37 HP, manufactured in 2008. The machine was first used in October 2010. Two-axle tree stump grinder with a Kohler engine (installed in May 2021), a four-stroke gasoline injection engine with 37 HP and hydrostatic drive to the front axle. Grinding depth below ground level up to 380 mm. Grinding wheel with 18 Laski knives, diameter including knives 510 mm. Optional grinding wheel with 6 Multitip knives. The grinding wheel is driven by a multi-V-belt drive and an electromagnetic clutch. Tires: 4 narrow / 4 wide tires. Weight approximately 670 kg when fully fueled. A new engine was installed in May 2021 (currently with 69 operating hours). The first engine had approximately 260 operating hours. Due to a piston seizure, which I caused myself (forgot to refill the oil), a new engine was installed in May 2021. It runs smoothly and is ready for use. Last service (air filter, oil and filter change) in November 2025. The last use of the grinder was in August 2025. The machine is located in a hall in 90762 Fürth and is available for testing. Viewing appointment by arrangement. Accessories: Many original Laski grinding teeth (used). 2 ramps, each 250 cm long, made of stainless steel (load capacity per ramp 500 kg). 2 large gasoline cans. 1 grease gun (new) + grease nipples (new). Kdedpszb H Szofx Abfjn 1 diamond grinding disc for angle grinder (for sharpening the grinding teeth). 1 grinding wheel for 6 Multitip grinding teeth. Attention: Important note! Due to new legal regulations, the sale is made without any warranty, guarantee or right of return. Sold as is! The sale is made excluding any liability for material defects!! Liability for damages to health, body or life, as well as for gross negligence and/or intentional breach of duty, remains unaffected! The grinder, including accessories, is sold as a source of spare parts! Since this is a private sale, I cannot offer any guarantee. The buyer agrees to this and acknowledges it with his purchase. If you have any questions or need more information, please feel free to send us a message.

Condition: new, Year of construction: 2026, Equipment: CE marking, max. cutting height 160 mm max. cutting width 600 mm Kedpfx Aou I Dmjbfedn feed rate 5-30 m/min. sawing motor 37 KW (also more KW possible) feed motor 2,2 kW max. saw blade insert at 145 mm 6 saw shaft diameter 70 mm weight 3.200 kg Special equipment Electrical height adjustment of the infeed rollers Laser with adjustment device Driven roller gear Electronic braking device

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: GG520A-19388, total width: 5,272 mm, total length: 12,500 mm, total height: 1,500 mm, overall weight: 5,300 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, Bottero 520LAMe-37: Automatic machine for cutting, breaking, and separating laminated glass, model SN GG520A-19388, manufactured in 2011. Automatic positioning based on optimization, automatic blade, 2 independent heating sections, 20mm trimming, laser device for positioning diagonal cuts. Max cutting length 3700mm, max speed 100m/min, min glass thickness 2/2mm and max 8/8mm. Includes: Kdjdpfoxg Nxysx Abfsn New felt (5mm) on the unloading table, air tubes have been replaced, and the 520 LAMe-37 has undergone servicing.

Condition: used, mileage: 11,300 km, power: 115 kW (156.36 HP), first registration: 04/2021, fuel type: diesel, overall weight: 7,500 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2026, color: green, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), soot filter, tail-lift, Ref. No.: 151 As-new BÖCKER AK37/4000 mounted on Atego chassis * Mercedes Benz * ATEGO 816 * 4x2 wheel configuration * Permissible total weight: 7,490 kg * BÖCKER AK 37/4000 CRANE with only 1,100 operating hours * WINCH * WORK PLATFORM * Debris skip available at extra cost * Tile clamp available at extra cost * Roof rolling tables available at extra cost * 4x outrigger supports * Hook height approx. 37 m * Max. lifting capacity: 4,000 kg * RADIO REMOTE CONTROL Kdjdpfx Asy Ngpqjbfon * Leaf spring suspension (front/rear) * Manual transmission * Lateral reach according to load chart * Very good condition * Tyres 95% * VAT refundable Trade-in possible Financing from 4.99% Errors and prior sale excepted! The details in this advertisement are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability for typing or data transmission errors. Listed equipment must be verified separately. All information in the listings is non-binding! Nationwide delivery available on request. Opening hours: Monday to Thursday from 9:00 am to 5:00 pm Friday from 9:00 am to 2:00 pm and by appointment!

Condition: used, mileage: 11,300 km, power: 115 kW (156.36 HP), first registration: 04/2021, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 09/2026, color: green, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space width: 2,500 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), soot filter, Ref-No.: 151 Like-new BÖCKER AK37/4000 on Atego chassis * Mercedes-Benz * ATEGO 816 * 4x2 wheel configuration * Permissible GVW: 7,490 kg * Crane: BÖCKER AK 37/4000 with only 1,100 operating hours * Wire rope winch * Work platform * Rubble skip available at extra cost * Tile clamp available at extra cost Kodpey Ngp Djfx Abfsdn * Roof rolling tables available at extra cost * 4x outrigger stabilizers * Hook height approx. 37 m * Max. lifting capacity: 4,000 kg * Radio remote control * Leaf spring suspension (front/rear) * Manual transmission * Lateral outreach as per load chart * Very good condition * Tires 95% * VAT deductible Trade-in possible Financing from 4.99% Errors and prior sale excepted! The details in this ad are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability for typing or data transmission errors. Listed equipment must be checked separately. All information in the advertisements is non-binding! Delivery throughout Germany available on request Business hours: Monday to Thursday from 9:00 am – 5:00 pm Friday from 9:00 am – 2:00 pm or by appointment!

Condition: good (used), mileage: 186,595 km, power: 125 kW (169.95 HP), first registration: 11/2022, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel, number of seats: 3, total length: 6,200 mm, total width: 2,020 mm, total height: 2,750 mm, loading space length: 3,300 mm, loading space width: 1,770 mm, loading space height: 1,940 mm, Year of construction: 2022, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - None - LED lamp - Manual - Radio/cassette - Rear view camera - Lane keeping assist - Fabric - Partition = Notes = Configuration: 4x2, Tare weight: 2317 kg, Gross vehicle weight: 3500 kg, Tow hitch, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: White, Heated mirrors, Rear view camera, Lighting type: LED lamp, Lane keeping assist, Air conditioning, Bluetooth, Engine power: 125 kW (168 Hp), Fuel: Diesel, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: extended and raised, Side paneling, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat material: Fabric, Seat adjustment: Manual, L2H2, automatic, air conditioning, LED, mbux, navigation, camera, tow hitch, spare wheel, Spare wheel tread depth: 7 %, Tire type: All-season tires = Additional Information = General information Number of doors: 1 License plate: KLEYN1 Axle configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Axle 2: Tire tread depth left: 4 mm; Tire tread depth right: 3 mm Weights Unladen weight: 2,317 kg Payload: 1,183 kg GVW: 3,500 kg Functional Height of loading area: 68 cm Environmental Emission class: Euro 0 Kdjdszbq S Sjpfx Abfon Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial information Leasing price: 351 € per month (delivery van, 72 months); Ask for more information and conditions.

Condition: used, Year of construction: 2004, Technical details: length: 6006 mm width: 2440 mm height: 2590 mm motor power: 22 kw sound level: 66 dB(A) rated capacity: 22 KW operating pressure: 8.0 bar revolutions per minute of the motor:: 2.945 U/min temperature range: 3 - 45 °C weight of the machine ca.: Auf Anfrage t 20-foot container Compressor station, soundproof container with 2 compressor units 2 pieces SPX Hankison GmbH, type HHL 450 – a desiccant air dryer for industrial compressed air systems. It is used to remove moisture from compressed air so that machines, valves, or pneumatic systems do not corrode or freeze. SPX Hankison HHL 450 Manufacturer: SPX Hankison Type: HHL 450 Kdodpfxsyx Tnre Abfon Design: Heatless desiccant dryer Max. operating pressure: 16 bar Connection: 2" NPT Series: HHL / HHS / HHE compressed air dryers *

Condition: used, Technical details: Kdjdpfxju Nliuo Abfen diameter: 260 mm width: 125 mm weight of the machine approx.: 50 kg revolution per minute: 4700 U/min Merkmale: neuwertig automatisches spannen Spannbereich außen 120mm Spannbereich innen 50mm Flanschenaufnahme innen Ø170 x 6mm *

Year of construction: 1991, condition: used, Technical details: Pressure capacity: 10 bar volume capacity: 5000 l/min Ksdpou Nzx Eefx Abfjdn motor capacity: 37 kW voltage: 380 V dimensions L x W x H: 0,9x0,7x1,5 m Equipment: - air cooling - suction opening = 500x400mm On sale as is, without test. Can be used as spare parts dispenser if necessary. *

Condition: used, Year of construction: 2012, operating hours: 861 h, 2012 | Atlas Copco Xas 37 Kd | Used Air Compressor | 861 hours Kodpfx Abey Udifsfodn 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 4000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 34 inspection points 33 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Working well during the inspection 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39908 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 55,900 km, power: 125 kW (169.95 HP), first registration: 11/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,500 mm, loading space width: 2,050 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Are you looking for a different model, engine, dimensions, or other features? Please do not hesitate to contact us. We offer attractive financing and leasing options – also for the Netherlands, Austria, and new businesses! Vehicle: Wheelbase: 3665mm * 9G-Tronic automatic transmission * Single cab * Twin tires on rear axle * Gross vehicle weight 3.5 tons Technology/Comfort: Digital radio (DAB) * "Tempmatic" air conditioning * Cruise control * Electrically adjustable, extended, and heated exterior mirrors * Multifunction steering wheel * 71L main fuel tank * Armrest for driver's seat * Double passenger seat * 3-seater configuration * "Maturin" black fabric upholstery * Electrical pre-installation, configurable special module * Storage compartment above the windshield * Rear window * Front cupholders * Central locking with remote control * Electric front windows * Outside temperature display * Fuel filter with water separator Safety: * Crosswind assist * Lane keeping assist * Pre-installation for intelligent tachograph EU * Attention Assist * Halogen headlights * Outline marker lights * Side marker lights * Adaptive brake light * Seatbelt warning system * Jump-start terminals * Hill start assist * Hold function * Underrun protection (ECE) Refrigerated box: * Floor reinforced with anti-slip surface * Two rear doors with individual locking and 270° opening angle * Side door with individual locking and step * Combination anchor/tie-down rail (1 on the left & 1 on the right) * Interior and exterior LED lighting * Drainage holes in the front of the box Kedpfx Asyg Tpdobfjdn * Double sealing system at the loading opening * Lateral underrun protection * Wheel arch with mud flaps Refrigeration unit: * ThermoKing V500X (-20°C) * Operation during driving and when stationary * Temperature recorder (thermograph) * Dual-temperature pre-installation Additional extras for the body are available for an additional charge. Note: Please call before your visit – we will ensure that your desired vehicle is on site. If it is not in Wachtendonk, we will gladly deliver it from our stock. Individual customization is possible upon request. Your vehicle partner since 1996. Call or email us now – we look forward to hearing from you! No liability for printing and typographical errors. Errors and prior sale reserved. Best regards, Pimenta Automobile

Condition: good (used), Geared motor, electric motor, electric geared motor -Manufacturer: SEW-Eurodrive, geared motor -Type: SAF 37 DR63M4/TF i = 86.36:1 -Speed: 15 rpm -Power: 0.18 kW -Hollow shaft: Ø 20 x 120 mm -Protection rating: IP54 Kdsdpey Tuhpefx Abfjn -Dimensions: 335/190/H145 mm -Weight: 11.3 kg

Condition: used, 2-axis linear guide with linear motors - Slide arm pick and place with linear guides for automation Loading unit such as Scara robot, manipulator, handling device, handling system, placement gripper, loading gripper for automation Manufacturer SCHUNK - GEMOTEC - AFAG - LINMOT Type PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of construction approx. 2005 Horizontal axis with linear motor Gemotec type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal movement: 780 mm Nominal force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal load capacity: max. 7000 g Horizontal guide column: Ø 20 mm Vertical axis with LinMot linear motor type PS01-37x240-M Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Vertical movement 160 mm Nominal vertical force: 44 N Max force vertical: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal guide column: Ø 20 mm Power supply unit LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame Support columns: 4 pieces Ø 55 mm Support column height adjustment: 200 mm (manual height adjustment) Kdjdpfx Aju H R Iwjbfon Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC - Can be moved in two axes - Mounting plate for tool holder 66 x 56 mm - Integrated path measurement - Axis modules with integrated positioning control - Festo pneumatic cylinder as holding brake on the vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Space requirement L x W x H: 1120 x 720 x 740 mm Weight: approx. 65 kg Very good condition

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, power: 37 kW (50.31 HP), unused Showroom model, immediately available: new screw compressor ALMIG BELT XP 37 - 10 bar with Aircontrol Basic control year: 2026 Operating hours: 0 Bh Specifications Type : BELT XP 37 Operating pressure : 10 bar(ue) Flow rate, according to ISO 1217 Annex C : 5.96 m³/min Degree of protection / insulation class drive motor : IP 55/ISO F Kjdoy U H N Uopfx Abfsdn Nominal power drive motor : 37 kW Operating voltage / frequency : 400/50 V/Hz Sound pressure level (DIN 45635 T.13) : 74 dB(A) Length : 1350 mm Width : 940 mm Height : 1680 mm Weight : 895 kg Compressed air connection : G 1 1/2" Visit our shop in Erlangen. We always have a wide range of new and used compressors in stock.

Condition: excellent (used), Year of construction: 2016, operating hours: 769 h, power: 16 kW (21.75 HP), load capacity: 227 kg, lifting height: 18,170 mm, fuel type: hybrid, color: other, Technical information Number of cylinders: 3 Drivetrain Type of fuel: Hybrid (electric and diesel) Drive: Wheel Engine type: Kubota D1105 Measures and weights Empty weight: 7.698 kg GVW: 7.925 kg Dimensions (LxBxH): 630 x 249 x 254 cm Battery Battery charging power: 20 kW Functional Mast: articulated arm Working height: 2.017 cm Maximum reach: 1.115 cm CE mark: yes Kdedpfx Absy Uxd Refsn Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - Beacon(s) - Non marking tires = Remarks = Drivetrain Stage / Tier: Stage IIIB / Tier IV interim General Country of production: United states

Year of construction: 2014, operating hours: 5 h, condition: like new (used), functionality: fully functional, grinding spindle speed: 16,000 rpm, Spindle IMT, type DRESS 72 - 37 - Absolutely like new For dressing grinding wheels to be profiled, including motor connection cable and spindle holder. According to the manufacturer, it offers the highest precision and smooth operation during the dressing process of CBN grinding wheels. HF spindle Dress 72 - 37 Spindle housing 72 mm Speed up to 16,000 min-1 (clockwise / counterclockwise) Power S1 100% 0.5 kW from 11,500 min-1 Power S6 40% 0.8 kW from 11,500 min-1 Motor type Asynchronous, 3 phases Number of poles 4-pole Power consumption Kjdpfx Abjgl Arrofedn Voltage 230 volts Current S1 100% 2.0 amps Current S6 40% 3.5 amps Current (max) 6.0 amps Frequency up to 533 Hz Spindle ball bearing Hybrid ceramic Bearing lubrication Grease-lubricated for life Cooling Housing cooling Sealing air + labyrinth 1 bar, approx. 50 l / min Temperature monitoring PTC Tool holder Ø 40 h2 Manual tool clamping Electrical connection (motor) 8-pole plug Axial supply connections Weight approx. 4.7 kg Motor cable 8+PE KD /-.10 Spindle holder 72 complete Aluminum, black anodized Reducing sleeve 80 / 72 Dressing spindle for holding dressing rollers in CNC grinding machines Profile in grinding wheel Operating manual available Only briefly assembled and used for testing purposes. Price negotiable Our asking price is € 3,140.00 net ex works, plus packaging costs. Subject to typographical errors and omissions in all technical specifications. We only sell to countries within the European Community.

Condition: excellent (used), Evaporator Guntner -Type: S-GHN 081B/37 -Cooling capacity: 82.3 kW at DT8, 63.7 kW at DT7 -Fin spinning: 7 mm -Fans: 3 x 810 mm -Dimensions: 5450 x 1000 x 1300 mm -Refrigerant: Freon -Volume: 112 L -Weight: 619 kg -Quantity in stock: 1 Kdjdpfx Aewhunxsbfon -Reference number: CH 548 -Condition: Used in good condition

Condition: good (used), mileage: 35,076 km, color: black, lifting height: 37,000 mm, Year of construction: 2016, operating hours: 3,725 h, Drivetrain Drive: Wheel Make of engine: MAN Weights Empty weight: 7.490 kg Functional Lifting capacity: 4.000 kg CE mark: yes Maintenance, history and condition Number of owners: 2 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Maximum lifting capacity at end of jib: 250 kg Emission level: Stage VI / Tier VI Delivery terms: EXW Latest inspection: 2025-04-14 Production country: DE Kdsdpfx Absy Sguxsfon Additional information Please contact Michael Overmeer for more information = Additional options and accessories = - Hook blocks = Remarks = Böcker AK 37/4000 montiert auf einen MAN TGL 7.180 with passenger basket, construction year 2016 with only 35.076 km and 3.725 hours. This vehicle is in nice condition (has been well maintained over the years) and has among other things: a passenger basket, automatic leveling, hydraulically folding support legs, hydraulic jip. Changes and typographical errors reserved.

Condition: ready for operation (used), Mahle Screw Compressor, Screw Compressor, Compressor; Mahle MSK D37, 37 kW Screw Compressor, Used Machine Manufacturer: Mahle Type: MSK D37 Year: 1995 Dimensions: 1480 x 845 x 1010 mm Operating Hours: 48,600 Maximum Operating Pressure: 10 Bar Power: 37 kW Delivery Quantity: 4900 l/min; 4.9 m3/h Kjdpfx Aswqbzdobfjdn

Condition: excellent (used), Year of construction: 2004, power: 25 kW (33.99 HP), stroke length: 350 mm, operating speed: 10 mm/s, total length: 6,000 mm, total width: 2,000 mm, total height: 3,400 mm, overall weight: 22,500 kg, travel distance X-axis: 1,000 mm, controller manufacturer: Delem DA 65W, working width: 4,300 mm, bending force (max.): 230 t, distance between stands: 3,700 mm, control type: CNC control, number of axes: 5, actuation type: hydraulic, Press brake DARLEY - EHP-LS 230 43/37 MACH-ID 9469 Make: DARLEY Type: EHP-LS 230 43/37 Control: Delem DA 65W Year: 2004 Max. bending length: 4300mm Distance between column: 3700mm Max. pressing force: 230T Beam stroke: 350mm Table Width: 250mm Troth beam: 400mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 5 Crowning: yes Hydraulic toolclamping: yes Power: 25kW Length: 6000mm Width: 2000mm Kdsdpjyvh S Tjfx Abfjn Height: 3400mm Weight: 22500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), mileage: 856,000 km, power: 242 kW (329.03 HP), first registration: 04/1999, fuel type: diesel, number of seats: 37, gearing type: mechanical, axle configuration: 4x2, emission class: euro2, color: white, brakes: retarder, suspension: steel-air, wheelbase: 4,900 mm, Year of construction: 1999, Equipment: air conditioning, power assisted steering, = Additional options and accessories = - Electric windows - Air conditioning - Leather interior - Leather upholstery - Air-suspended seats - Radio/CD player - Sliding roof - Toilet - Automatic heating system = Further information = Technical information Number of cylinders: 6 Engine displacement: 11,630 cc Front axle: Max. axle load: 6,500 kg; Tire tread left: 80%; Tire tread right: 80%; Suspension: leaf-spring suspension Rear axle: Twin tires; Max. axle load: 11,500 kg; Tire tread left inner: 40%; Tire tread left outer: 40%; Tire tread right inner: 40%; Tire tread right outer: 40%; Suspension: air suspension Kodpfx Absy T H Rpefsdn Dimensions Dimensions (L x W): 1,036 x 250 cm Weights Unladen weight: 11,660 kg Payload: 6,340 kg Gross vehicle weight (GVW): 18,000 kg Interior Upholstery: Leather Condition Technical condition: very good Visual condition: very good Further information Please contact Andre, Henri, or Andre for more information.

Condition: used, maximum load weight: 28,380 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2015, loading space length: 8,500 mm, loading space width: 2,350 mm, loading space height: 2,000 mm, loading space volume: 37 m³, Year of construction: 2015, Equipment: ABS, Air, lift, SAF disc, EBS, alloy wheels, aluminium drop supports, access ladder, PVC half-shell mudguards, foldable aluminium UFS, double-sided AFS, 5 mm floor, 4 mm side walls, combined rear wall suspended, slider, walkway with ladder, PVC roll-up tarp with central locking, tarp protection, A-sign, reflective sign, loading pressure gauge Kjdexpl Ayepfx Abfedn

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: A11 702998, Equipment: type plate available, Compressor unit with pressure vessel, air dryer, and additional accessories Kedpfxjxvidns Abfodn

Condition: good (used), functionality: fully functional, mileage: 809,518 km, power: 382 kW (519.37 HP), first registration: 03/2007, fuel type: diesel, empty load weight: 14,670 kg, maximum load weight: 17,330 kg, overall weight: 32,000 kg, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 3,700 mm, axle spacing: 3,700 mm, next inspection (TÜV): 02/2027, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 9,300 mm, total width: 2,520 mm, total height: 3,600 mm, Year of construction: 2007, Equipment: ABS, AdBlue, additional headlights, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, full service history, onboard computer, parking heater, power assisted steering, power mirror, retarder, seat heater, soot filter, spoiler, tachograph, trailer coupling, truck registration, Model: VOLVO FH520 -37 8X4 JOAB Hooklift + Steering Axle, Leaf/Air Suspension First registration: 23.03.2007 Mileage: 809,518 km (original)? Engine power: 382 kW (520 HP) JOAB hooklift system Type: L24 5690 AC with remote control (not tested) Tipper hydraulics (PTO) Parking heater Antennas Radio/Cassette/CD/MP3 Air conditioning Air-suspended seat with seat heating and full adjustability 1x bed Electric windows Electrically adjustable exterior mirrors Multifunction steering wheel Speed limiter Sun visor Work lights Fog lights High beam Warning light Toolbox Aluminum fuel tank Transmission: Automatic Tank: Diesel (450 liters) AdBlue (60 liters) EURO 5 Axle configuration: 8x4 Lift axle and steering axle Differential lock Wheelbase between axle 1 and 2: 3,700 mm Wheelbase between axle 2 and 3: 1,370 mm Wheelbase between axle 3 and 4: 1,380 mm Tire size axle 1 (front): 385/65R22.5 Tire size axle 2 (rear): 315/80R22.5 Tire size axle 3 (rear): 315/80R22.5 Tire size axle 4 (rear): 385/65R22.5 Leaf/Air suspension Wheel covering Retarder/Intarder/Engine brake Unladen weight: 14,670 kg Payload: 17,330 kg Gross vehicle weight: 32,000 kg Vehicle dimensions (L x H x W): 930 cm x 360 cm x 252 cm Container platform length: 6.4 m Plough mounting device on right side and front New TÜV and emissions certification possible by arrangement and at additional cost! You are welcome to contact us for more information and pictures via WhatsApp, Telegram, Viber, and Signal. We speak German and English, but feel free to send us a message in your language! Trade-in possible! Price is net! We can deliver your vehicle directly to the ports of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany or Antwerp/Belgium and Amsterdam. Kodpfx Aoy Rz E Nebfodn We can ship the vehicle worldwide for you! Export license plates on request! We also support you with export, original data confirmation for local type approval, supplier's declaration, export document preparation, and customs plates if required. Viewing and test drive possible at any time, including weekends, by prior telephone arrangement! Disclaimer: The buyer is responsible for independently verifying the condition, dimensions, and features of the goods/vehicles. All information provided without guarantee. Subject to changes, prior sale and errors.