Used Haul-Off Machine for sale (70,976)

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm Ksdpfx Aeydvzdjhbjdu ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: J22143, total length: 5,200 mm, total height: 2,391 mm, type of input current: AC, outer diameter of label roll: 400 mm, inside diameter of label roll: 75 mm, overall weight: 800 kg, input voltage: 380 V, Performance specifications: Product: Minimum height 40mm Maximum height 330mm Maximum diameter 150mm Minimum diameter 15mm Labels: Maximum outer roll diameter 400mm Inner roll diameter 75mm Maximum label width 150mm Application speed min 70 ppm Conveyor speed max (infinitely adjustable) 27.5 m/min min 7.5 m/min Dimensions Overall height 2391mm Length 5200mm Power supply Electrical 380V AC (three-phase) 50/60Hz, 4kVA Pneumatic 0.06 m3/min Protection class IP20 Parameter control via Allen Bradley PanelView Plus 700 Condition: Functional, professionally dismantled Note! System is sold without the Cognex camera system Ksdpfxozv S Rwo Ahbodu Further information available upon request

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Ksdpfx Aezkbirohbedu Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Fetzel TLM 500 V4 Laminating Machine The machine is 100% functional and in perfect condition. This is an advanced, high-performance automated system, well-suited for commercial lamination services. Manufactured in Austria. Technical specifications: Max. sheet size: 520 mm x 720 mm Min. sheet size: 200 mm x 290 mm Kjdpfx Ahjz S Uyxobedu Min. paper weight: 120 gsm Max. paper weight: 400 gsm Operating temperature: 80–130°C Max. operating speed: 35 m/min Feeder stack height: 600 mm Weight: 700 kg Power supply: 380 V Installed power: 7 kW Requires an additional 6-bar air supply. Features a large-diameter, chrome-plated steel cylinder that ensures a stable temperature. Equipped with pneumatic pressure, sheet separation, and an automatic high-pile feeder. Sheet feeding accuracy: ±2.0 mm. The feeder unit can be moved aside, providing excellent access to the cylinders. Includes an expanding shaft for film rolls, mounted on a swing-out arm. Features a color touchscreen control panel for easy operation. Includes a sheet-straightening module.

Condition: reconditioned (used), Year of construction: 1986, Graver grinding machine Make: Deckel Model: S0E Year of manufacture: 1986 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Mach. no.: 86-5751 with guarantee Accessories: Kjdeqctnijpfx Ahbsdu - Machine stand - Integrated dust extraction - Grinding wheel with flange - Pulling tool - Operating instructions Incl. installation of an on/off switch with undervoltage release to implement restart protection e.g. in the event of a power failure or when the power plug is pulled incl. production of a mounting adapter plate Used as seen The machine is technically compliant with the state of the art at the time of manufacture.

Condition: reconditioned (used), Year of construction: 1984, Graver grinding machine Make: Deckel Model: S0E Year of manufacture: 1984 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Mach. no.: 84-5532 Kdsdpfoqctp Sex Ahbju with guarantee Accessories: - Machine stand - Microscope with support - Integrated dust extraction - Grinding wheel with flange - Pulling tool - Operating instructions Incl. installation of an on/off switch with undervoltage release to implement restart protection e.g. in the event of a power failure or when the power plug is pulled incl. production of a mounting adapter plate - Used, as seen -

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 11,500 mm, total length: 16,500 mm, total height: 4,350 mm, -Cooling section from VMI -Swiveling discharge conveyor -Strip/felt dimensions of approx. 70mm-800mm width -24 cooling fans -Stainless steel dip tank and reservoir -Pallet magazine -Pallet cleaning with extraction system -Drive unit replaced -Chain replaced -Transverse conveyor with 2 pallet positions -Hydraulic lifting table -Weighing scale -Various stacking options on pallets, DB Gibo, cardboard packaging, etc. -Other equipment from the production line is also available for sale. Attractive package price possible. Kjdpfx Aez Eppgohbsdu

Condition: excellent (used), Year of construction: 2012, operating hours: 36 h, functionality: fully functional, color channels: 5, Coating unit (chamber doctor blade system) Prinect Axis Control Prinect Press Center with remote control for ink zones, ink ducts as well as circumferential, lateral and diagonal register with Job Memory Card and touch screen Alcolor film dampening system with recirculation and cooling Autoplate automatic plate changing system automatic ink roller washing device automatic blanket and impression cylinder washing device Substrate thickness extension 0.6 mm Powder sprayer IR dryer Extended high-pile delivery Kjdpfx Ahsy Hvt Hjbsdu Standard accessories

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 1139, Print counter (m): 66,6 Power: 15.000 sheets/hour Format (mm): Max. Paper Size: 520 x 375 mm // Min. Paper Size: 100 x 105 mm Max. Printing Area: 505 x 350 mm Paper Thickness: 0,04 – 0,6 mm Kdedpjvcxwzefx Ahbju Dampening preparation: technotrans alpha.d Powder device: Grafix

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: C116353, Equipment: CE marking, Reconditioned Production Ready！ Ref Code:1014 Emmegi Classic Magic Electronic double‑head cutting‑off machine Twin‑head saw for aluminium and PVC profiles, with NC‑controlled DC motor driving automatic mobile head movement. All angles pneumatically settable down to 22°30’ external. Key Features Blade: Ø 450 / 500 mm cemented carbide blades Cutting length: 5 m useful cut Angle range: 90° to 22°30’ external (pneumatic tilt) Positioning: Magnetic strip direct measuring system Control: Alphanumeric fluorescent display (2 × 40 chars) Memory: 99 profile corrective values (auto angle calculation) 20 cutting lists (50 rows each) via keyboard 10 cutting lists (100 rows each) via USB (PC) Connectivity: USB port, RJ45 network card; label printer ready Clamping: Horizontal/vertical pneumatic vices with low‑pressure device Safety: Pneumatic full protective hoods for cutting zones Lubrication: Water spray‑mist (oil emulsion or minimal quantity oil) Technical Specifications Motors: 2 × 2.2 kW (400 V); total 5.3 kW Blade speed: 2,800 rpm Operating pressure: 6–8 bar; air consumption 15 NL/cycle Kdodpfx Ahoy U Tczjbju Dimensions (5 m version): 9,400 × 1,080 × 1,840 mm (L×D×H) Weight: Approx. 1,500 kg Applications High‑precision cutting of aluminium / PVC profiles for windows, doors, curtain walls, and light alloy processing.

Condition: excellent (used), Year of construction: 2022, 400mm swing, 220mm max diameter, 510mm cutting length, Siemens 828 Control, 65mm bar capacity, Kjdpfx Ahoz Hatfobedu 12 station turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 3 jaw chuck, low volt light, coolant, Tool setter, swarf conveyor

Condition: good (used), Year of construction: 2013, 480mm swing over bed, 257mm Swing over the Cross-slide, 1250mm between centres, 80mm spindle bore, Ksdpfxezqr Hnj Ahbsdu 25-2500rpm spindle, 7.5kW Spindle Motor, coolant, Prototrak SLX Control, 3 jaw chuck, QCTP & holders, tailstock.

Condition: excellent (used), Year of construction: 1999, Counter: 34,552,033 Format (cm): 36x52 Kdjdpoyrfz Aefx Ahbeu Dampening: conventional dampening Equipment / Additional information: with N&P (numbering & perforating) unit

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 272 mm, turning length: 1,250 mm, turning diameter: 470 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 1,250 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 2,500 rpm, total height: 1,850 mm, total length: 2,700 mm, total width: 1,350 mm, type of input current: three-phase, overall weight: 2,300 kg, XYZ Proturn CNC/Manual Lathe Model: Proturn 410 Control: Proto Trak LX2 Swing Over Bed: 470mm Swing In Gap: 730mm Swing Over Cros Slide: 272mm Distance Between Centres: 1250mm Spindle Speeds: 50-2500 RPM Kdsdpfx Ahozux Iyobeu Spindle Bore: 80mm Machine With: 300mm 3 Jaw Chuck Quick Change Toolpost with Holders Dimensions: 2700 x 1350 x 1850mm high Weight: 2300 Kgs

Year of construction: 1978, condition: excellent (used), machine/vehicle number: 664937N, Counter (m): 42 Format (cm): 32x46 Dampening: Varn Kompac III Kdsdpjgfb E Refx Ahbsu Equipment / Additional information: with N&P (numbering & perforating) unit

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Kdedjya H Nkspfx Ahbsu Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Kdjdpjzuxn Tofx Ahbsu Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 Kdsdpfx Ahoxghngebeu The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant Kjdpszav D Djfx Ahbsdu For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), EKH-455 Shrink Wrapping machine Machine ready to use. Photos show the actual product. Description: The main advantages of shrink wrappers include simultaneous sealing and shrinking, small dimensions, and easy portability. They are an ideal solution for shops, bakeries, warehouses, archives, bookstores, etc. They offer adjustable sealing time and heater temperature, and can also shrink PVC and polyolefin films. Technical Specifications: Power Supply: 230 V Kodpfx Ahjz R Iqusbodu Power: 3.77 kW Maximum Product Dimensions: 520 x 390 x 250 mm Sealer Dimensions: 550 x 420 mm Weight: 125 kg

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs Kdedpfxeyzf Nae Ahbju For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 3,000 mm, total width: 700 mm, total height: 1,500 mm, type of input current: three-phase, overall weight: 250 kg, input voltage: 380 V, length stop: 3,000 mm, lifting height: 250 mm, We offer this used OZ MACHINE METEOR - II 420 lightweight aluminum circular saw, manufactured in 2021. Model: METEOR - II 420 Serial number: 018/210023 Year of manufacture: 2021 Total power: 3 kW Frequency: 50–60 Hz Voltage: 400 V AC 3P 1N PE Current: 6.4 A Dimensions (L×W×H): 3760×1080×1325 mm Weight: 264 kg Air pressure: 6–8 bar Air consumption: 38 l/min Idle speed: 3000 r.p.m. Saw blade diameter: 420 mm Includes dust extraction system and compressor. Kdedpfxjzy Upko Ahbou If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control, Kdjdpoxftqdofx Ahbsu

Condition: good (used), Hang 114-30/4 Paper Drill Machine The unit is in perfect condition and 100% functional. A top-tier machine in the category of paper drills. This is a currently manufactured model, featuring the most comprehensive equipment configuration available. Equipped with two integrated frequency converters (inverters) for stepless spindle speed adjustment (260 – 1,800 rpm) and smooth table elevation. Rapid drill zeroing/alignment system. The drilling table is adjustable in all planes; the margin (backgauge) setting is controlled via dial indicators. Waste material is directed into an external container. Operated via an electric foot switch. Energy-saving standby mode. Automatic drive belt tensioning. Each drilling head features independent adjustment, allowing for the use of drills of varying lengths. Includes a cooling and lubrication system for the drills. Technical specifications: Number of drilling heads: 4 Drill diameter: 3–10 mm Kjdpfx Ahoz S Un Aobedu Stack height: 65 mm Drill spacing: min. 36 mm / max. 260 mm Table dimensions: 600 x 480 mm Power supply: 400 V Weight: 400 kg The machine comes with documentation, maintenance tools, and drill bits.

Condition: excellent (used), XYZ SLX 425 x 1.25m CNC Lathe Year 2016 Serial number L769 Kedpfx Ahjz N Ambebedu ProtoTRAK SLX Distance between centres 1,250 mm Maximum cutting length 1,080 mm Swing over bed 480 mm Swing over cross slide 257 mm Swing in gap 700 mm Gap in front of faceplate 170 mm Cross slide travel 230 mm Spindle bore 80 mm Spindle nose D1-8 Camlock Spindle motor 7.5 kW / 10 hp Spindle speed range 25–2,500 rpm in 3 ranges Tailstock quill travel 160 mm Tailstock taper No. 5 Morse taper Tailstock quill diameter 75 mm Bed width 370 mm