Used Hage 3D Precision One for sale (15,617)

Condition: excellent (used), functionality: fully functional, 1 x Tailstock lathe Precision engineering PM 1-FZ Equipment: - Hand lever cross slide with Tripan quick-change system - Electric tailstock for drilling and threading - Collet chuck with draw-in collets Technical data: - Spindle bore: 23 mm - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Distance between centers: 160 mm - Maximum diameter over bed: 220 mm Accessories: 20 x Draw-in collets 359 E K 23 (1 - 20 mm/ 1 mm increment) 1 x Draw-in collet in tailstock 319 E K 12 Ksdpfjzl Dr Esx Ap Aolw 1 x Tripan tool holder with 1 cassette Operating manual (copy) Additional accessories, such as collets, are available at an extra charge. The machine can be inspected while powered on.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, 1 x Backturning lathe Precision engineering PM 1-FZ Year of manufacture: 1995 In very good condition with a comprehensive range of accessories. Equipment: - Hand lever cross slide Ksdpfx Asqyfpmjp Aelw with Tripan quick-change system - Electric tailstock for drilling and threading - Collet chuck with draw-in collets - Coolant system Technical data: - Spindle bore: 23 mm - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Distance between centers: 160 mm - Largest turning diameter over bed: 220 mm Accessories: 39 x draw-in collets 359 E K 23 (1 - 20 mm, 0.5 mm increments) + 5 x square collets 10 x draw-in collets in tailstock 319 E K 12 (1 - 10 mm, 1 mm increments) 1 x Tripan quick-change tool holder with 1 cassette 1 x spindle in tailstock with MK 2 taper 1 x MK 2 drill chuck Röhm 1 - 10 mm 1 x simple clamping tool holder Operating manual (copy) Photos of the accessories will follow. Further accessories, such as collets with intermediate sleeves, are also available in stock. The machine can be inspected while powered on.

Year of construction: 2012, condition: excellent (used), functionality: fully functional, The technical condition is very good, and the device has been tested. This means that the devices are calibrated, perform 100% accurate measurements, and are regularly warmed up for at least 12 hours once a month. It is possible to perform an on-site transformer oil test – of course, after initial verification to compare the results, as shown in the photos. The MYRKOS chromatograph performs the analysis of concentrations of gases dissolved in insulating oil (DGA). It allows for the detection of developing faults in power transformers and other equipment containing insulating oils (chokes, current transformers). Kedpjzcmblsfx Ap Aelw It also allows for the analysis of gas extracted from a Buchholz relay! The MYRKOS chromatograph is extremely accurate, compact, and provides complete coverage for the relevant concentrations of fault gases in the oil. A gas standard (a cylinder with calibration gas) ensures measurement consistency with concentration standards. Before performing a measurement, the device is always calibrated, and its functionality is checked. A special shaking syringe (included) ensures the correct volume ratio. An excellent solution for oil laboratories in power plants and research facilities serving the power industry. PPMReport software with a Polish language version is included. It has built-in diagnostic tools: Duval's triangle and Rogers' ratios. Used by power plants, system operators, and laboratories serving the power and industrial sectors. The field version is equipped with a special pressure vessel for helium carrier gas (purity 99.999%). It is supplied with shaking syringes for preparing the extraction gas cushion, syringes for calibration, and an air sample. TECHNICAL PARAMETERS Number of gas types: 9 (Hydrogen H2, Methane CH4, Ethane C2H6, Ethylene C2H4, Acetylene C2H2, Carbon monoxide CO, Carbon dioxide C02, Oxygen 02, Nitrogen N2) Measurement range for gas concentrations in oil: H2: 5-60,000 ppm, Other gases: 1-60,000 ppm, 02: 60 ppm - 100,000 ppm, N2: 500 ppm - 100,000 ppm : 1050 mm 3. TECHNICAL DESCRIPTION Gas chromatograph for testing insulating oils using the DGA (Dissolved Gas Analysis) method, for field and laboratory applications. The laboratory version includes a shaker. The MYRKOS chromatograph performs the analysis of concentrations of gases dissolved in insulating oil (DGA). It allows for the detection of developing faults in power transformers and other equipment containing insulating oils (chokes, current transformers). It also allows for the analysis of gas extracted from a Buchholz relay. The MYRKOS chromatograph is extremely accurate, compact, and provides complete coverage for the relevant concentrations of fault gases in the oil. The condition is very good. We have two identical, fully functional units. If you purchase both, the price of one will be 50% lower. Before purchasing, I recommend inspecting and testing the equipment on-site (performing a test). The last test was performed on November 21, 2025, and compared with another MYRKOS device (the test was verified in a certified laboratory). Available for viewing in Rzeszów.

Condition: excellent (used), For sale is a professional Dr. TRESKY AG T-3000-FC3 station, manufactured by a renowned Swiss company. This is a high-quality laboratory device designed for the precise assembly and positioning of semiconductor structures (Die Bonding / Flip-Chip Assembly). It is used in research laboratories, as well as in the production of electronics, photonics, optoelectronics, and microelectronics. The T-3000-FC3 model is one of the most versatile platforms from Tresky and enables the execution of both basic and advanced assembly processes. Technical specifications: Manufacturer: Dr. TRESKY AG Model: T-3000-FC3 Country of manufacture: Switzerland Type: manual Die Bonder / Component Placer FC3 Bond Force Control controller Olympus SZ51 stereoscopic microscope Precision XY table Bond force control Vacuum and pneumatic system LED work lighting Documentation included Numerous working tips, holders, and accessories as shown in the photos Applications The device is used for: assembly of semiconductor devices (Die Bonding), Flip-Chip technology, assembly of MEMS components, production of photonics and optoelectronics, assembly of VCSEL lasers, assembly of sensors and hybrid circuits, research and development work and prototyping. Condition The device is sold with extensive equipment as shown in the photos: Olympus microscope, FC3 controller, documentation, drawers with accessories, set of tools and working tips, pneumatic components and accessories. Klodpfezi Upcjx Ap Asw The visual condition is very good. It is sold exactly in the configuration shown in the photos.

Condition: used, load capacity 25,000 kg freestanding insulation plate and anti-slip plate on the underside anti-slip plate on the upper side construction height 88 mm in middle position adjustment range 13 mm Kljdpefii Dmefx Ap Aew dimensions 370 x 230 mm weight 31.8 kg - new - unused - 21 units on stock  price per unit    

Condition: new, Precision membrane coupling K 01 No. 200 301 01 Kjdpezi D A Ssfx Ap Aolw 0.98800215 00076 HEIDENHAIN

Condition: excellent (used), EOS P 396 Laser Sintering System Manufacturer: EOS GmbH Type: P 396 Machine Type: Industrial SLS laser sintering system for plastic components Process: Selective Laser Sintering (SLS) For sale is a professional, industrial laser sintering system from EOS GmbH. The system was developed for the additive manufacturing of plastic components using the Selective Laser Sintering process and is suitable for prototyping, small-series production, research and development, as well as industrial production applications. Technical Data Technology: Selective Laser Sintering (SLS) Usable build volume: 340 x 340 x 600 mm Build rate: up to 48 mm/h (material-dependent) Layer thicknesses: 0.06 mm 0.10 mm 0.12 mm 0.15 mm 0.18 mm Laser system: CO₂ laser Laser power: 70 W F-Theta precision optics Scanning speed up to 6 m/s Laser class 1 Voltage: 400 V 3~ / N / PE Frequency: 50 / 60 Hz Rated power: 10 kW Current draw: 16 A Fuse rating: 32 A Supply: Integrated nitrogen generator External nitrogen connection available Compressed air supply required: at least 10 m³/h at 5,000 hPa Software EOS PSW EOS RP Tools EOSTATE Interfaces STL Ethernet Certifications CE NFPA EN 60825-1:2007 Maintenance Condition Current service and maintenance records are available. According to the available service reports, the following work has been carried out, among others: Heating elements replaced Roller belt replaced X-axis and carriage cleaned Laser window and mirrors cleaned Seals replaced Safety circuits checked Docking Station / Powder Supply Docking station with pneumatic conveying system for automated powder supply to the laser sintering system. Manufacturer: HYDAC Cooling GmbH Type: FWKS-G2-001500-W-W-R25-2-IW-UL Electrical data: 230 V ±10 % 1 PH / 50-60 Hz Max. current draw: 8.0 A ICC / SCCR: 10 kA CE / RoHS Additional Equipment Control panel Docking station Pneumatic conveying system 2 x EOS Multibox Capacity per Multibox: approx. 230 liters For storing, collecting, and transporting fresh and used powder. Dimensions and Weight System including control cabinet: approx. 1,840 x 1,175 x 2,100 mm Control panel: approx. 950 x 700 x 1,550 mm Total weight of laser sintering system: approx. 1,400 kg Recommended installation space: at least 4.3 x 3.9 x 3.0 m Areas of Application Additive Manufacturing Rapid Prototyping Small-Series Production Automotive Industry Mechanical Engineering Aerospace Medical Technology Research and Development Scope of Delivery EOS P 396 Laser Sintering System Control panel Docking station 2 x EOS Multibox Available documentation Service reports Accessories and components as shown in the pictures Condition Used Machine from industrial use Optical condition as shown in the pictures Scope of delivery as shown Kodpszarg Uofx Ap Ajlw Inspection and testing on site possible and expressly desired after prior appointment. Shipping or freight forwarding possible. Availability: upon agreement. Scope of delivery as shown. Changes and errors in the technical data as well as prior sale are reserved.

Condition: excellent (used), SLM Solutions SLM 500 HL Professional system for the additive manufacturing of metal components using selective laser melting. Suitable for industrial applications, prototype construction, toolmaking, aerospace, medical technology, and series production. Technical data Manufacturer: SLM Solutions Type: SLM 500 HL Year of manufacture: 2015 Build volume: 500 x 280 x 365 mm Laser configuration: Quad-fiber laser 4 x 400 W Max. build rate: up to 105 cm³/h Layer thickness: 20 µm to 75 µm Min. feature size: 150 µm Beam focus diameter: 80 - 115 µm Max. scanning speed: 10 m/s Supply voltage: 400 V / 50 Hz, 3/N/PE Control voltage: 24 V DC Rated current: 36 A Heating power: 2.4 kW Protection class: IP50 Compressed air requirement: 50 l/min at 6 bar Special features Patented multi-beam technology Automatic powder management PSX sieving station PRS unpacking station Laser class 1 CE marking available Service / Operating history The system was used exclusively for processing aluminum from the beginning and operated under a nitrogen atmosphere. It operated reliably until decommissioning. During the last maintenance, the oxygen sensors, including the evaluation unit, were updated to the latest version. The system was then professionally decommissioned. Cooling unit Manufacturer: Riedel Type: WKS 101.2M5LE.I Year of manufacture: 2016 Refrigerant: R134a Filling quantity: 3.0 kg Operating pressure HD: 18.7 bar Protection class: IP54 Scope of delivery according to delivery note SLM 500 HL laser melting system, approx. 2680 kg Riedel cooling unit WKS101.2M5LE.I, approx. 200 kg SLM filter system, approx. 150 kg SLM unpacking station PRS 500, approx. 855 kg SLM sieving system PSX 500, approx. 690 kg Logitrans lifter LFSM 1002/1620, year of manufacture 2015, approx. 550 kg 2 x SLM build cylinders, each approx. 205 kg SLM spare parts / piping Dimensions / Weight Complete system according to manufacturer's specifications: approx. 5200 x 2800 x 2700 mm Weight according to manufacturer's specifications: approx. 3100 kg in operating condition approx. 2400 kg without powder Condition Used system from industrial application. The system has been dismantled and stored. Optical condition as shown in the pictures. Scope of delivery as shown in the pictures. Inspection and testing on-site are possible by arrangement and are highly recommended. Important note: All information is provided to the best of our knowledge based on available documents, Kodpfeza Ethjx Ap Aolw software displays, manufacturer data, delivery note and nameplates. Deviations in technical data are possible. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2021, Renishaw Type: Equator 500 Year of manufacture: 2021 Item description: For sale is a Renishaw Equator™ 500, a high-precision industrial 3D measuring and inspection system designed for series production and process control on the shop floor. The Equator 500 is not a traditional coordinate measuring machine (CMM), but a comparative measurement system developed specifically for fast, repeatable measurements directly in the production environment. It is ideal for mass production, in-process measurements, and automated inspection routines. The unit is perfectly suited for checking dimensional accuracy, geometric tolerances, and position tolerances of workpieces, and can provide feedback to CNC machines. The software loads correctly, system status as per display: "Started OK" (see photos). Features & Application Areas: - 3D measurement of workpieces - Comparative measurement principle (very fast inspection cycles) - High repeatability in the micrometer range - Real-time temperature compensation - Suitable for shopfloor use - Automation ready (e.g. robot loading) - Ideal for series production, spot-checks, and process control Typical Industries: - CNC manufacturing - Metalworking - Automotive / supplier industry - Mechanical and tool engineering Technical Data (manufacturer information / approximate values) Manufacturer: Renishaw Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: X / Y: approx. Ø 500 mm Z: approx. 150 mm Measurement principle: Comparative coordinate measurement technology Kljdozix Nmopfx Ap Aew Temperature-compensated measurement Accuracy: Very high repeat accuracy Measurement accuracy in the micrometer range (depending on application and strategy) Control & Software Controller type: Equator 500 Software version: 2.5.21.1 RRTLOS version: 5.1.12 Operation via PC-based Renishaw software Electrical Data: Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power requirement: approx. 1 kW Dimensions (approx.) Total height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.): 130 kg Condition: used Scope of delivery: (see photos) - Renishaw Equator™ 500 measuring system - Controller / industrial PC - Monitor - Keyboard and mouse - Base frame - Accessories as shown in the photos (Subject to technical modifications and errors. All data provided without liability!) For further questions, we are happy to assist you over the phone.

Condition: used, 3DGENCE Type: Industry F420 Kedpozix Aysfx Ap Aslw Technical specifications: Build volume: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900mm x 950mm x 1950mm Printing system: Dual extruder equipped with cleaning system + Interchangeable nozzle head Filament diameter: 1.75 mm Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: Soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic exchange system Print head temperature (max.): 500°C Print bed temperature (max.): 180°C Chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (See pictures) Weight: 350 kg (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone. Written orders can be placed by email or fax.

Condition: excellent (used), Eos EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The machine has been serviced regularly (last service: 08/2024). It has exclusively processed PA11 (EOS PA1101). The system is offered including accessories: 1 x build box, docking station, multibox with cooler Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been thoroughly inspected." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set: PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. charge: 420 g) Multibox is a typical EOS accessory for powder handling, used for transporting and interim storage of material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): Travel 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Take-off chamber heating: 1.6 kW, resistance heater coil with separate temperature measurement Control & Operation: Process computer with Windows 7 OS 15.1" TFT display, membrane keypad & mouse Ethernet network connection Other: Noise emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Kledpfxozixzio Ap Ajw Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Line protection: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see picture) Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Specifications and information are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: The Stratasys Fortus 450mc is a high-end industrial 3D printer from the FDM (Fused Deposition Modeling) series. It is used worldwide in prototyping, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: - Stratasys Fortus 450mc (3D Production System) - Krumm Tec CLEAN MATIC 3150 cleaning system for support material - Badger Magnetics 8 kVA transformer (suitable for EU power supply) The system comes from a professional environment and was used for the production of high-quality functional parts and prototypes. Key Features of the Fortus 450mc: - Industrial FDM 3D printer with large build volume: 406 × 355 × 406 mm - Capable of printing high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* - Exceptional dimensional accuracy and repeatability - Network capable, touchscreen interface, user-friendly operation - Ideal for prototyping, small series production, toolmaking, jigs and fixtures (*dependent on material licenses) Technical Data Fortus 450mc: - Voltage: 120/208 V, 3-phase (transformer for EU operation included) - Power consumption: 18 A - Dimensions approx.: 127 × 91 × 196 cm - Software version as per display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150: - Model: CM 3150 US/PS - 4 kW, 400 V, 50 Hz, 16 A - Ideal for removing SR-30 / SUP706 support material - Weight: 140 kg Total Weight approx.: 600–700 kg Important Note: "The table shown in the photos is not included in the scope of delivery." Scope of Delivery: - Stratasys Fortus 450mc - Krumm Tec CLEAN MATIC 3150 cleaning system - Badger Magnetics 8 kVA transformer Klsdpfx Ajzixy Ssp Asw (Technical specifications are subject to change and errors excepted!) If you have further questions, we would be happy to answer them by phone.

Condition: used, functionality: fully functional, Year of construction: 2017, total length: 2,210 mm, total height: 1,448 mm, total width: 1,238 mm, type of input current: three-phase, input voltage: 400 V, HP Multi Jet Fusion 4200 additive manufacturing system, tested and fully functional. An industrial solution for the series production of end-use parts in PA12 nylon. Klodpfxsy U H Idj Ap Aow THE SYSTEM INCLUDES: - HP Jet Fusion 4200 printer - HP Processing Station (powder processing station) - Build Unit(s) MAIN FEATURES: - Technology: Multi Jet Fusion (MJF) - Build volume: 380 × 284 × 380 mm - Material: PA12 (nylon 12) - Production of short and medium series of functional end-use parts - Year of manufacture: 2017 - Three-phase power supply APPLICATIONS: industrial, automotive, medical (prosthetics and orthotics), consumer goods, on-demand spare parts. Equipment from a professional service bureau. Available for pre-purchase inspection. Location: Spain. Loading and transport can be arranged. Please inquire about the detailed inventory of Build Units, consumables, and the included powder stock.

Condition: good (used), Year of construction: 1993, functionality: fully functional, Schaublin 102 N - VM, Machine number BL 330699, Year of manufacture approx. 1993, Machine with leadscrew, Centre height 102 mm, Leadscrew: diameter 40 mm, hardened and thread ground. Leadscrew pitch: 4 mm. Feeds: 8 longitudinal feeds from 0.02 to 0.3 mm/rev. Klodpjzlc Apofx Ap Ajw Threading range: Metric: 20 pitches from 0.25 to 4 mm. Imperial (inch): 25 pitches from 80 to 6 tpi. Centre distance 450 mm, max. turning diameter over bed 200 mm, max. turning diameter over cross slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories,

Condition: good (used), Year of construction: 1998, functionality: fully functional, Schaublin 102 N, Kedpfszlcz Ejx Ap Aolw Machine number BL 329218, Year of manufacture approx. 1998, Center height 102 mm, Distance between centers 375 mm, Max. turning diameter over bed 200 mm, Max. turning diameter over slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories.

Year of construction: 2023, operating hours: 20 h, condition: new, functionality: fully functional, 🔥 3D printing filament Extrusion Line – DEMO Unit | 1.75–5 mm | Up to 100 m/min | 12 months warranty High-performance extrusion line for production of filaments (3D printing, welding wires, technical strings). Reliable, fully automated solution directly from manufacturer. Completely made in the European Union. _____ Key Features • Materials: ABS, PLA, PET-G, MARLEX, DOWLEX and others • Filament diameter: 1.75–5 mm • PLC control with an automatic operation • Triaxial measurement for precise diameter control • Continuous production (compensator - up to 140 m of filament) • 3-zone cooling tank (up to 80 °C) _____ Technical Data • Line speed: up to 100 m/min • Output: 5–20 kg/h • Screw diameter: 35 mm • Screw length: 30 L/D • Drive power: 9.2 kW • Cooling tank: 6 m • Spool size: 0.5–5 kg (no downtime during change) _____ Condition • DEMO unit – directly from manufacturer • Excellent condition • Available immediately • Full factory warranty for 12 months FCA BOCO price: 158 850,- EUR w/o VAT _____ Manufacturer BOCO Pardubice Machines, s.r.o. (Czech Republic) Klsdpjy Ipflofx Ap Asw Over 30 years of experience in plastics processing technology

Condition: used, Hydromechanical, NC machine vise, VIS - HYDRAULIQUE Precision machine vise, spanner Type 20700 Year of manufacture approx. 2000 Kledszin Avjpfx Ap Aow Jaw width 150 mm Jaw height 42 mm Clamping range 0 to 250 mm Opening width max. 253 mm Clamping force 6 tons Guide rail height 51 mm Guide rail length 450 mm - Hydromechanical machine vise - Quick adjustment with clamping ball lock in a hole grid, 8 positions - Sturdy base body, ground on all sides - Can be clamped horizontally, vertically, or laterally - Guide rail with 20 mm guide groove Dimensions L x W x H 480 x 150 x 107 mm Weight: 30 kg Good condition

Condition: excellent (used), Keyence Model: VR-5200 Type: Measuring head Light Sources Light source for observation: LED ring light (red, blue, green) Light source for measurement: White LED Controller: VR-5000 Observation and Measurement Range Macro mode Magnification (based on a 15-inch monitor): 12×: Horizontal: 24.0 mm Vertical: 18.0 mm Magnification (based on a 15-inch monitor): 25×: Horizontal: 12.0 mm Vertical: 9.0 mm Magnification (based on a 15-inch monitor): 38×: Horizontal: 8.0 mm Vertical: 6.0 mm Magnification (based on a 15-inch monitor): 50×: Horizontal: 6.0 mm Vertical: 4.5 mm Micro mode Magnification (based on a 15-inch monitor): 40×: Horizontal: 7.6 mm Kljdpfx Aezimlpep Ajw Vertical: 5.7 mm Magnification (based on a 15-inch monitor): 80×: Horizontal: 3.8 mm Vertical: 2.9 mm Magnification (based on a 15-inch monitor): 120×: Horizontal: 2.5 mm Vertical: 1.9 mm Magnification (based on a 15-inch monitor): 160×: Horizontal: 1.9 mm Vertical: 1.4 mm Zoom: 1× to 4× Height Measurement Measurement resolution: 0.1 µm Height measurement range Without image stitching in Z Macro mode: 10 mm Micro mode: 1 mm With image stitching in Z Macro mode: 50 mm Micro mode: 30 mm Repeatability (σ) Without image stitching in Z 0.4 µm With image stitching in Z 1.0 µm Measurement accuracy Without image stitching in Z ±2.5 µm With image stitching in Z ±4.0 µm Width Measurement Repeatability (σ) Macro mode: 1 µm Micro mode: 0.5 µm Measurement accuracy Macro mode: ±5 µm Micro mode: ±2 µm Image Stitching Fully automatic measurement (automatic XY control + automatic Z focus), Automatic assignment, automatic area setting Measurable XY area 206 x 104 mm Object table XY travel: 184 × 88 mm (motorized) Z travel: 73 mm (motorized) Load capacity: 4.5 kg Working distance: 75 mm Image acquisition element 4-megapixel CMOS, S/W Transmitter lens Double telecentric lens x 2 Receiver lens Double telecentric lens Data processing Dedicated PC according to KEYENCE specifications (Operating system: Windows 11 Pro) Power connection Voltage: 100 to 240 V AC, 50/60 Hz Power consumption: Max. 200 VA Environmental resistance Ambient temperature: 15 to 30 °C Relative humidity: 20 to 80% RH (no condensation) Weight: approx. 28 kg (weight of the measuring unit only: approx. 11 kg) Distance extension object table Observation software VR-5000 Version 3.3.5.75 Image stitching module VR-H3J Creates a single large image from a series of images taken with the observation software. You will see color images. Analysis extension module VR-H3CA Expands the functionality of the analysis software. Can perform measurement comparison and 3D CAD measurement comparison. Condition: used Scope of delivery: (as shown in the pictures) (Changes and errors in the technical data, information provided are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, EOS Type: P100 Technical Data: External dimensions: 1320 mm x 1067 mm x 2204 mm Technology: SLS Material class: Polymers Materials: PA220 Build volume: 200 x 250 x 330 mm Laser type: CO2; 30 W Kledpfx Apezii Uto Asw Capable of producing delicate components with wall thicknesses down to 0.4 mm. Fits through a standard door (1067 mm width); therefore, it can be installed in regular premises. + 6 filled powder containers PA2200 (PA12) + 2 build frames 400 V +6%/-10% at 50/60 Hz; CEE 5-pole Condition: used Scope of delivery: (see image) (Subject to technical modifications and errors. All information is provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: used, For sale is a high-quality 3D CNC coordinate measuring machine from the renowned manufacturer Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. This device stands out for its precision, reliability, and versatility in industrial metrology. Features & Equipment: - CNC-controlled 3D coordinate measuring machine - Multi-sensor capable (optical and tactile measurements possible) - Moving-bridge design (MB/Z) for high stability and flexibility - High precision measurement of complex workpieces - Robust construction, designed for continuous industrial use - Suitable for quality control, production monitoring, and R&D applications Additional Equipment – Renishaw TP200 Probe System: The high-precision, touch-trigger Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It allows for quick probe change-outs and precise measurements even with long probe styli. Key Features: - Strain gauge technology: Minimizes deflections are registered with high accuracy; typical errors such as “lobing” are avoided - High precision: Repeatability up to 0.4 μm, 2D probing uncertainty ±0.8 μm - Fast changeover: Automatic probe change with SCR200 rack, no recalibration required - Durability: Probe module lifetime exceeds 10 million triggerings - Flexibility: Standard- (SF) and low-force (LF) modules for sensitive materials - Compatibility: Usable with Renishaw PH10 probe heads and extensions up to 300 mm Klsdpfx Apezii Dzs Ajw Technical Specifications (excerpt): - Connection: M8 connector, PI200 interface - Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) - Probing force XY: 0.02 N, Z: 0.07 N - Overtravel force XY: up to 0.4 N, Z: up to 4.9 N - Weight (sensor + module): 22 g - Stylus threads: M2 Technical Data: - Manufacturer: Werth Messtechnik - Model: Scope-Check 650×750×500/MB/Z - Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm - Supply voltage: 115–230 V AC - Power consumption: max. 10 A Scope of Supply: - Werth Scope-Check 650×750×500/MB/Z - Renishaw TP200 probe system including probe modules - Accessories as shown in the attached images Important note: "The table shown in the photos is not included in the sale." (Specifications and technical details subject to change and errors!) We are happy to answer further questions by phone.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, warranty duration: 6 months, Shining 3D FreeScan Combo – Metrology System / 3D Scanner We are offering a new Shining 3D FreeScan Combo unit manufactured in 2023. The device has only been demonstrated to customers on a few occasions. Aside from that, it is in like-new condition, fully functional, and ready for use. The scanner is covered by a 6-month seller's warranty. For any questions or additional information, please contact us via message or phone. Kledpfxezk E D Ts Ap Aew

Condition: new, Year of construction: 2024, operating hours: 80 h, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Drive: Wheel Empty weight: 6.870 kg Mast: articulated arm Lifting capacity: 200 kg Kljdpfeywrcrsx Ap Asw Working height: 1.460 cm Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: reconditioned (used), For Sale: EOS M400-4 – High-Performance Metal 3D Printer This EOS M400-4 is a state-of-the-art metal additive manufacturing system located at the customer’s site. It is equipped with 4 (four) 400W lasers, ensuring high precision and productivity for large-scale industrial applications. Specifications: • Laser Power: 4 x 400W • Technology: Direct Metal Laser Sintering (DMLS) Compatible Materials: This system supports a wide range of materials, making it ideal for diverse applications across industries such as aerospace, automotive, and medical. Compatible materials include: • Nickel-based alloys: IN718_1, HX-1, IN625_1, IN939_1, K500 • Aluminum alloys: Al2139 AM, AlSi10Mg, Constellium CP1 • Case Hardening Steel: CaseHardeningSteel 20MnCr5 • Stainless steels: 17-4PH, CX, 316L, PH1 • Tool steels: MS1 • Titanium alloys: Ti64 (grade 23, grade 5), TiCP (grade 2) Why Choose the EOS M400-4? • Large build volume for industrial-scale production. • High throughput for speed and precision. • Wide material compatibility for versatile applications. Services Included: • Transport & Installation Support: We can arrange safe relocation and installation at your facility. • Expert Maintenance Plans: Flexible plans to keep your machine in peak condition. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality, refurbished EOS additive manufacturing machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we ensure reliable machines, tailored services, and premium materials for your production needs. What we offer: • Expert service: Installation, servicing, and upgrades performed by skilled former EOS technicians. • Exclusive materials: High-quality consumables tested and optimized for EOS systems. • End-to-end support: From transport to tailored maintenance plans, we handle every detail. Trust IM3D to help you scale your metal additive manufacturing capabilities with confidence. Kjdjzk Ekgjpfx Ap Ajlw Contact us for more information or inquiries!

Condition: used, Year of construction: 2021, operating hours: 210 h, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Drive: Wheel Empty weight: 6.700 kg Mast: articulated arm Lifting capacity: 200 kg Rental currency: EUR Klsdpfswvylrex Ap Ajw Please contact KEY-TEC Sales for more information

Condition: used, Year of construction: 2021, operating hours: 195 h, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Drive: Wheel Empty weight: 6.700 kg Mast: articulated arm Lifting capacity: 200 kg Rental currency: EUR Please contact KEY-TEC Sales for more information Kledpfjwvpd Dox Ap Aow