Used H & K Abfülllinie Für Glasflaschen (Mehrweg) for sale (73,412)

Condition: used, Clamping angle for workpiece clamping, measuring device, for vice Njdpfx Ajc N Dp Hefaecr -Hole circle: 140 mm -Shaft: Ø 30 mm -Groove: mm -Surface: milled -Dimensions: 182/195/H180 mm -Weight: 8 kg

Condition: used, Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for square steel: 25/40/50 mm -Shearing tool for round steel: 25/40/55 mm -Type: 4412151064 -Type: 4412151063 Ncodpocwf Dajfx Afajr -1x dimensions: 220/206/H30 mm -1x dimensions: 215/205/H30 mm -Weight: 16 kg

Condition: used, Tapping machine, pipe thread cutter Ncedpsfyh Ebofx Afajr -without tools -Operating voltage: 220 volts -Dimensions: 830/530/H1080 mm -Weight: 64 kg

Condition: refurbished (used), functionality: fully functional, tank capacity: 20,000 l, 20000 litre steel unit to store heating oil or diesel, it's used but refurbished. Ncodoi Arumjpfx Afaer

Condition: new, Year of construction: 2026, tank made of steel to store heating oil, diesel or HVO Nodpsi A Hw Rofx Afaocr

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 100,000 l, storage tank 100.000 litre volume for heating oil, diesel or HVO Nedsi A Hx Iepfx Afascr

Condition: new, machine/vehicle number: eca976917d325d4adc41b69e8, empty load weight: 7,200 kg, maximum load weight: 27,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r 22,5, Further information Chassis semitrailer forwarding Fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2 king pins, main frame reinforcement for 25 tons in the centre of gravity on 3 m loading length when pushed together. 13 pairs of hooks for lashing strap attachment welded onto the cross members 23 pairs of lashing eyes embedded in the outer frame, 3.5 tons each Outer frame with Load-Lock profile for lashing strap attachment Please note! Cannot be used with drop sides! 24 t. 2-speed support winch in reinforced design for loaded trailer, single-sided operation, with semicircular lower section and straight connecting plate, with thrust compensation Wheel chocks with holder Aluminum side bumper Underride guard Half-shell mudguards with anti-spray flaps according to EG 1 spare wheel holder for 1 electric wheel, with wheel mounting kit 1 closed stanchion stowage box, open at the top, below loading area, doors on both sides, w=450 mm/H=400/420 mm/t=2460 mm 6 pairs of extendable stanchion pockets, for 80x80 mm tubular stanchions, extendable from loading width 2000 mm to 3100 mm 4 pairs of stanchion pockets embedded in the outer frame, for 80x80 mm shaped tubes 11 stake pockets centrally recessed in the floor, for 80x80 mm shaped tubes, with reinforcement beam, each installed between the outer stake pockets 5 x 3 pairs of stanchion pockets recessed on the outside of the longitudinal beams, for 80x80 mm shaped pipes, including reinforcement beams - for securing loads to the front and rear when transporting 2x5000 mm or 2x 6000 mm construction steel mats 6 lightweight stanchions W=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, top with cable guide for belt tensioning 12 lightweight stanchions W=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded to the bottom on both sides Nodpfx Asi Ri Szjfaecr Note: stanchion pockets / stanchions are not designed for securing long materials, pipes etc. on their own without looping around them 2 plastic toolboxes, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 6 construction steel winches with wire rope and counter hooks, with rope feed-through through the outer frame, 1 removable slip-on gear for construction steel winches - supplied loose (without bracket on the frame) Telescoping Main frame can be telescoped Extendable by max. 4,000 mm and can be arranged approx. every 500 mm Locking with pneumatic bolt locking + display Frame locking on both sides, actuation via hand knob, operation for brake/locking and suspension in FR-left in front of the axles Storage compartment between the side members when extended Axles + suspension SAF disc brake axles with 430 mm disc diameter Last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button, as well as manually via switch in the towing vehicle (pin 10), without truck installation. Offset axle spacing mm Air suspension 1st axle automatic lift axle, can also be operated electrically from the truck, with starting aid, without truck installation (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake system Colored cable routing for easy servicing Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS make of the manufacturer's choice, electronic brake syst

Condition: new, machine/vehicle number: 087c7b6bc0c6118a84279fb46, empty load weight: 4,100 kg, Further information Frame Welded steel construction made of fine-grained steel, hot-dip galvanized, flat plateau without raised edges, Loading area slanted downwards by approx. 8° after the rear axle. Side members made of steel profiles, Hot-dip galvanized steel frame, with stainless steel plate at the kink as cable guide - flush with the floor. For trucks with Wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1350 mm Trailer coupling Towing hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, incl. assembly and electrics with 7-pin socket Accessories/conversions 2 holders for wheel chocks, aluminum side bumpers, foldable - are taken from the truck! Steel underride guard, quarter-shell mudguards with mud flaps - will be taken from the truck! Storage box Plastic tool box, with drawer and shelf, w=650 Incl. / h=520 / d=670 mm, lockable with a padlock (lock not included). not included) 1 holder for 3 pcs. petrol cans 1 stainless steel storage box, w=600/h=400/t=500 mm, with polished door, incl. lockable, includes control valve. lockable, includes control valve and electro-hydraulic pump unit. pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash-proof according to techn. technical possibility) Electrics Adaptation of the existing rear lights, 2 additional LED work lights, recessed in the bulkhead recessed switched via parking light with switch on front wall outside in FR-left, 1 LED work light, at the rear, with integrated reversing camera Incl. with color flat screen monitor, screen with suction cup mount and power supply via 24 volts, Voltage divider 24/12V, 1 socket 7-pin 12V = plug-in adapter Base Mega Grip made of toothed galvanized grating, steel grating 50/4 Incl. with mesh width 50 mm. Top side with anti-slip serration, laid continuously over the entire main frame plateau Lashing eyes 12 pairs of lashing rings suspended freely pivoting in the outer frame - 10 tons each. 1 x at the front and the last one at the rear. 1 piece Lashing eyelet at the very rear in the center for fastening the winch cable 12 lashing eyes centrally embedded in the floor, 5 tons each, (not included in Incl. rear sloping) Front wall Sheet steel bulkhead, height 1,500 mm. Fixed with corner pillars at front wall height. In each case 2 x 12 pcs. Suspension brackets for lashing chains mounted on the left and right of the front wall Ncodpfx Asi Riytofasr Cable winch Electric cable winch, 24 volt, pulling force approx. 6350 kg, mounted in the center of the bulkhead (recessed with loading bridge), operation with radio remote control, cable length min. 35 m x 9.5 mm, with roller rope window, with cable pressure plate, incl. overload protection, cable freewheel clutch, manual switch with approx. 5 m control lever, acceptance of the cable winch, civil engineer test report, test book, operating instructions Drive-on ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also for ramp loading), electric for ramp loading), electro-hydraulically foldable and laterally movable - incl. Electro-hydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle Ramp support made of hot-dip galvanized steel grating (like the floor of the loading bridge), with with anti-skid toothing. Ramps can be pushed together to approx. 170 mm, Hydraulic ramp extension. Ramp prepared for operation on loading ramp with full load capacity. Ramp locking with 2 tension belts. Ramp tip offs

Condition: new, machine/vehicle number: c78894767223a51dd199030f3, empty load weight: 4,600 kg, Further information Frame Welded steel construction made of fine-grained steel, hot-dip galvanized, flat plateau without raised edges, Loading area slanted downwards by approx. 8° after the rear axle. Side members made of steel profiles, Hot-dip galvanized steel frame, with stainless steel plate at the kink as cable guide - flush with the floor. For trucks with Wheelbase: 2nd axle 1,795 mm / 2nd to 3rd axle 4105 mm and 3rd to 4th axle 1350 mm Trailer coupling Towing hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, incl. assembly and electrics with 7-pin socket Accessories/conversions 2 holders for wheel chocks, aluminum side bumpers, foldable - are taken from the truck! Steel underride guard, quarter-shell mudguards with mud flaps - will be taken from the truck! Storage box Plastic tool box, with drawer and shelf, w=650 Incl. / h=520 / d=670 mm, lockable with a padlock (lock not included). not included) 1 holder for 3 pcs. petrol cans 1 stainless steel storage box, w=600/h=400/t=500 mm, with polished door, incl. lockable, includes control valve. lockable, includes control valve and electro-hydraulic pump unit. pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash-proof according to techn. technical possibility) Electrics Adaptation of the existing rear lights, 2 additional LED work lights, recessed in the bulkhead Nodpfsk Unitex Afascr recessed switched via parking light with switch on front wall outside in FR-left, 1 LED work light, at the rear, with integrated reversing camera Incl. with color flat screen monitor, screen with suction cup mount and power supply via 24 volts, Voltage divider 24/12V, 1 socket 7-pin 12V = plug-in adapter Base Mega Grip made of toothed galvanized grating, steel grating 50/4 Incl. with mesh width 50 mm. Top side with anti-slip serration, laid continuously over the entire main frame plateau Lashing eyes 12 pairs of lashing rings suspended freely pivoting in the outer frame - 10 tons each. 1 x at the front and the last one at the rear. 1 piece Lashing eyelet at the very rear in the middle for fastening the winch cable 12 lashing eyes centrally embedded in the floor, each 5 to. (not included in Inkl. rear slope) Front wall Sheet steel bulkhead, height 1,500 mm. Fixed with corner pillars at front wall height. Each with 2 x 12 pcs. Suspension brackets for lashing chains mounted on the left and right of the front wall Cable winch Electric cable winch, 24 volt, pulling force approx. 6350 kg, mounted in the center of the bulkhead (recessed with loading bridge), operation with radio remote control, cable length min. 35 m x 9.5 mm, with roller rope window, with cable pressure plate, incl. overload protection, cable freewheel clutch, manual switch with approx. 5 m control lever, acceptance of the cable winch, civil engineer test report, test book, operating instructions Drive-on ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also for ramp loading), electric for ramp loading), electro-hydraulically foldable and laterally movable - incl. Electro-hydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle Ramp support made of hot-dip galvanized steel grating (like the floor of the loading bridge), with with anti-skid toothing. Ramps can be pushed together to approx. 170 mm, Hydraulic ramp extension. Ramp prepared for operation on loading ramp with full load capacity. Ramp locking with 2 tension

Condition: new, machine/vehicle number: f80f2330e1318ef03bc20755e, empty load weight: 3,200 kg, maximum load weight: 35,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Fine-grained steel welded construction in lightweight design, saddle plate with replaceable 2 kingpins, only 2 longitudinal beams as double T-beams for retrofitting connecting gallows at the front in new/current design, outer frame slightly slanted with load-lock profile for attaching tension beltsNote! to attach the belts in conjunction with drop sides, the drop sides must be opened! 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation, wheel chocks with holder, aluminium side bumper, foldable, galvanized steel underride guard, extendable, half-shell mudguards!!! enclosed loose, not mounted!!!, with anti-spray flaps behind each axle, 1 plastic water barrel, capacity approx. 30l, in FR left BPW disc brake axles with 430 mm disc diameter, axle/chassis laser-measured Reduction of tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, can also be lowered manually, can be operated with a hand button on the vehicle 2-line compressed air brake system, with 1 air reservoir central standard, spring-loaded parking brake, 2 interchangeable coupling heads at the front, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable, EBS 2S/2M, test connection for brake cylinder pressure on the EBS module laid to the outside, Attention: The trailer vehicle may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, control unit + brake integrated in frame as with tipper semi-trailer, mounted in front of the axles Brake pad wear indicator for disc brakes via ABS/EBS lamp Truck 385/65 R22.5 Continental tires, steel rims, factory silver 24 volt, multi-chamber lights, amber LED lighting at the side as for tipper semi-trailer, dimension 3000 mm must be observed, 2 white LED position lights at the front, loose, 2 white/red lane departure lights at the rear, 2 x 7-pin interchangeable sockets at the front, without connecting cable Germany, test approval according to EC 2007/46 for complete vehicle, 24/7 service hotline, prepared for double license plate holder single-line1 x plastic and 1 x stainless steel interchangeable holder Warning sign according to ECE - 70, aluminum, loose, EBS, safe parking, without contour marking / reflective strips according to ECE R 048, Frame: DB 7350 nova gray, support legs: black coated Available immediately! Nsdpfx Afei Riwqsaocr

Condition: ready for operation (used), Pull tube for tensioning device from IKEGAI TURN 25 , length tube: 730 mm, Ø 75 mm, hydraulically operated, used, normal signs of wear, 100% functional ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Nsdpfx Afjx Nluroaecr

Condition: new, maximum load weight: 323 kg, overall weight: 450 kg, total width: 1,880 mm, total height: 860 mm, Year of construction: 2025, SMART BIKER 1 The new, practical, and low-maintenance motorcycle lowering trailer Simple lowering and lifting mechanism: From now on, you can easily and conveniently load and unload your motorcycle by yourself Lowerable - user-friendly - space-saving Important Safety Notice Dear Customers, We must inform you that fraudsters are copying our vehicle advertisements on and eBay Classifieds and offering them on other, fake websites at a significantly lower price. Please note: Our advertisements are only valid on the official platforms of and eBay Classifieds. Any forwarding or posting on other portals is fake and for fraudulent purposes. To protect our vehicles from such misuse, we do not publish all detailed information in our ads. Full information is only available when you contact us directly. If you are seriously interested, please contact us directly by email or phone. Thank you for your understanding. 450 kg gross vehicle weight, payload up to 327 kg 100 km/h approval for Germany Load and unload your motorcycle on your own, no ramps required. Lowerable: quick, simple, and convenient loading. Upright storage: space-saving due to vertical positioning. Please request current stock status. If your desired color is not available, we typically deliver the requested trailer within 4-5 weeks. Upon ordering, you may choose: Paint finish - our standard colors are: deep black - anthracite - white - red - orange - blue For a small additional charge, you can also choose a custom paint finish from the entire RAL color palette. Please note: mounted parts such as mudguards, lamp carriers, etc. are always painted black. Aluminum wheels - two variants available: two-tone silver/black or solid black Delivery options 1. Collect yourself in 53919 Weilerswist, with handover briefing – free of charge 2. Delivery on its own axle with handover briefing – pricing on request 3. Forwarding shipment on pallet to curbside (without briefing) – pricing on request Standard equipment Welded steel frame Galvanized frame parts with powder coating Lowering and lifting mechanism with additional lock and bolt safety Space-saving upright storage Ncjdpfx Aovm Iwljfaer Adjustable front wheel chock Foldable rear boarding plate 10 lashing points for tie-down straps SPP rubber spring axles 195/55 R10C tires on aluminum rims Painted steel mudguards Folding license plate holder for two-line plate 12V lighting system, 13-pin connector LED taillights LED marker lights + lane marker lights Plastic wheel chocks Technical data Gross vehicle weight: 450 kg Unladen weight: 127 kg Payload: up to 323 kg Tires: 195/55 R10C on aluminum rims Dimensions in drive position: 248 x 188 x 86 cm (LxWxH) Storage height in upright position: 200 cm Max. motorcycle wheelbase: 1650 mm Offer price incl. 19% VAT. Financing available, e.g., monthly payment of EUR 90.00 for 24 months, or monthly payment of EUR 175.00 for 12 months. Contact us for details. Subject to credit approval. Visit us or contact us in writing. Viewing Mon-Fri 09:00–17:00, Saturdays 09:00–12:00. Offer and further information on request: Office tel. Technical changes, delivery with equivalent components, errors, and omissions excepted.

Condition: good (used), Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punch stamp -Manufacturer: WMW Smalcalda, shearing tool for square/round steel -Item No.: 5450 9/83 -Shearing tool for round steel: 25/40/55 mm -Type: 4412151064 -Square steel: 34 x 34 mm -Round steel: Ø 19/29/37 mm Nsdex I A Rzspfx Afaocr -Number: 3x shearing tools available -Price: per piece -Dimensions: 200/160/H18 mm -Weight: 3.9 kg

Condition: ready for operation (used), Yaskawa cover with encoder connector plug for servo motor SGMPH-04DAA6CD-OY, used, in good condition, 100% functional, scope of delivery as shown in photos. Ncodpfx Ajx Ip Rhjfajr

Condition: ready for operation (used), Yaskawa / RGB Pulsecoder BG3D5Z24H8 1244 for servo motor SGMPH-04DAA6CD-OY with RGB PCB ES-V7049-4, used, in good condition, 100% functional, delivery as per photos. Nedpex Ip Rbofx Afascr

Condition: ready for operation (used), Mitutoyo 519-326 lever probe / measuring probe for MU-Check, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Nodpsi Eb Rbjfx Afajcr

Condition: new, GMN for Schaudt Mikrosa TSE 70 c x 25 TSE 70c - 25/8 spindle SN: 385706, unused in opened original packaging, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Nsdpfx Afsnri Euoaecr

Condition: new, Tool spindle 0.533.518.3 for Klingelnberg gear cutting machine, steep taper 1:3.975, length = 228 mm, Ø connection: 150 mm, Ø flange: 186 mm, Ø tool connection 99 mm, unused in original packaging, 100% functional, scope of delivery as per photos Ncsdjxtwcyepfx Afaor

Condition: ready for operation (used), Mitsubishi BN638B811H01 / EL FPMV0PE092D Resolver for HG-KN73JK servo motor, used, good condition, 100% functional, scope of delivery as per photos Ncjdpfx Aov U Iuyofajr

Condition: new, Steinmeyer 1414.537/20.50.4460.4900 P3P ballscrew drive Total length: 4900 mm, thread length: 4460 mm for Schaudt Mikrosa SN:916336 ,unused in opened original packaging, 100% functional, scope of delivery according to photos,ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Nsdjxah Ndepfx Afaecr

Condition: ready for operation (used), Allo DZEL 320/10-S0 Electronic transmitter for pressure, serial no. according to photo, used, normal signs of wear, 100% functional, scope of delivery according to photos Nedpfxoi D Tz Ee Afajcr

Condition: new, Turck TBEN-LG-16DOP Compact multi-protocol I/O module for Ethernet F/W Version V3.1.3.0, used, normal signs of use, 100% functional, scope of delivery as per photos Nsdpfx Afoxaicreaecr

Condition: ready for operation (used), KUKA Rotor with Binder 86 61109H31 Brake for 1FK6081-6AF71-1ZZ9-Z Motor SN: P46100/T0,used, good condition, 100% working, scope of delivery as per photos Ncodpfx Afju Uxaboaer

Condition: ready for operation (used), electronic product 8402.087.A connection board for Maho electronic handwheel. 27.68.956, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Ncodpfji D Urijx Afajr

Condition: ready for operation (used), Turck TBEN-L4-8DIP-8DOP Compact multi-protocol I/O module for Ethernet F/W Version 3.2.9.0, used, normal signs of use, 100% functional, scope of delivery as per photos Ncsdpfjxaiclex Afaor