Used Gemm Bcb 15 for sale (15,735)

Condition: good (used), functionality: fully functional, Pfeiffer Vacuum Technology AG dry vacuum pump, Ed. 15, ADP 122 P Crodpfx Aiezh I S Uslod Model: ADP122P Condition: Used Technical data: 200-208V General: Multi-stage, dry-running rotary vane vacuum pump Water cooling Nominal pumping speed: 95 m³/h (50 Hz), 112 m³/h (60 Hz) Ultimate pressure (without N₂ purge): up to approx. 1.5 × 10⁻² mbar Motor power: 1.5 kW N₂ purge: available (P-version) Inlet (suction side): DN 50 ISO-KF Outlet: DN 40 ISO-KF Integrated electronics with frequency converter Power connection cable with Hubbell HBL2421 NEMA L6-20P twist-lock plug, 20 A / 250 VAC, L=80cm Accessories: Adixen control panel / display unit P/N 119419, firmware V3.06.07, with LCD display and foil keypad Note on item condition: Gases that have been pumped: NF₃/N₂

Condition: new, Year of construction: 2025, Exhibit available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer Pressure: 10 bar Nominal power: 15 kW Delivery rate: 2.11m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 Visit our store. Crodpfx Aszh Hwioilsd We always have a large selection of new and used compressors in stock!

Condition: used, functionality: fully functional, machine/vehicle number: 516210E00866, Year of construction: 2015, operating hours: 14,299 h, load capacity: 1,500 kg, lifting height: 6,600 mm, free lift: 2,400 mm, fuel type: electric, mast type: triplex, construction height: 2,860 mm, drive type: Elektro, Electric 3-wheel forklift truck Fahrgestellnummer: 516210E00866 Mast type: Triplex Technical condition: very good Battery Volt: 48V Battery Ah: 575Ah Battery year of construction: 2014 Description: Still RX20-15 No.: M0214 Year of construction: 2015 Operating hours: 14299 The device is visually in good and technically in good condition. Charger on request. Subject to errors and prior sale. If you have not found your truck, please contact us. We still have a large selection of other devices on site. Sideshift, 3rd valve, Crsdeuhxx Depfx Ailod

Condition: used, functionality: fully functional, machine/vehicle number: H2X386G11198, Year of construction: 2016, operating hours: 6,728 h, load capacity: 1,500 kg, lifting height: 3,200 mm, free lift: 1,600 mm, fuel type: electric, mast type: duplex, construction height: 2,100 mm, empty load weight: 3,120 kg, drive type: Elektro, Electric 3-wheel forklift truck Fahrgestellnummer: H2X386G11198 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Description: Linde E 15 No.: R0173 Year of construction: 2016 Operating hours: 6,728 The device is visually and technically in good condition. Charger on request Errors and prior sale reserved. If you have not found your truck, please contact us. We have a large selection of other appliances on site. Sideshift, 3rd valve, 4th valve, Csdpfouhw Rxex Ailord

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - Motor 15 kW - 400 V - 3000 rpm - Dust extraction port diameter 250/300 mm - Dimensions: approx. 900 x 750 x 1000 mm - Weight: approx. 190 kg Cedszdlwgjpfx Ailsrd Availability: short-term Location: 63934 Röllbach

Condition: used, Used machine Equipment and technical specifications: Automatic edge feeder Cartridge glue system 4-roll printing unit Cross-cut saw unit Flush trimming unit Combination trimming unit: flush/bevel/radius Radius scraper Buffing unit Credow Nad Hopfx Ailsd Edge band thickness 0.3 - 20 mm (depending on unit) Edge band height max. 66 mm Edge band length min. 200 mm Feed rate 8/16 or 12/24 m/min With LIGMATECH workpiece return system The return line of this return system is located above the panel processing level. The workpieces move back to the operator on an inclined plane. Special features compared to the ZHR 0x models: Automatic detection and rotation of parts from transverse to longitudinal Automatic adjustment of the rotation speed to the workpiece length Minimum and maximum workpiece dimensions For longitudinal edge processing: 2200 x 1000 For transverse processing with subsequent rotation: 250 x 120/2200 x 800 Maximum workpiece thickness: 60 mm Location: Bavaria Availability: Short-term

Condition: used, Used machine Year of manufacture: 1988 Condition: well-maintained Equipment and technical specifications: - Length of worktables: 1,440 mm - Total width of two worktables: 710 mm - Worktable tilt adjustment: 0 – 30 degrees - Working pressure: 6 bar - Sanding belt length: 2,170 mm - Sanding belt width: 150 mm - Sanding belt speed: 10 – 20 m/sec - Vertical adjustment of oscillation unit: 125 mm - Air consumption: 25 NL/min - Electrical: 400 V / 2.9 kW Crsdpfx Aiexzl Aqeljd Weight: 490 kg Availability: short notice Storage location: 63934 Röllbach

Condition: good (used), Year of construction: 1979, Lifting device, adjustable traverse, crane traverse, crane hook traverse, load traverse, heavy-duty traverse, compensating traverse, lifting device, material hoist for lifting platform, overhead crane, column jib crane, workstation crane, chain hoist -Manufacturer: JJSietas, crane traverse compensating traverse, for transporting different loads -Loading capacity: 15 t ( 6x 2.5t ) -Load hooks: 6 pcs. with sheet metal claws, clamping range 0 - 25 mm, see photos Cedolbdl Ejpfx Ailerd -Dimensions: see photo sketch Dimensions: 8520/240/H620 mm -Empty weight: 1200 kg

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97.008706/001, total height: 6,500 mm, total width: 3,500 mm, total length: 2,000 mm, load capacity per storage section: 200 kg, This is a carousel racking system from Bellheimer Metallwerk GmbH, available for self-collection, with the following external dimensions (L x W x H): 2000 x 3500 x 6500 mm. Permissible total load capacity: 6330 kg Permissible shelf load with uniform load distribution: 240/200 kg max. Shelf dimensions (L x W x H): 590 x 2900 x 300 mm Crsdpfxjzhu Tfo Ailjd The carousel racking system is fully functional and can be inspected on site.

Condition: used, mileage: 350,521 km, power: 315 kW (428.28 HP), first registration: 01/2020, fuel type: diesel, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, power assisted steering, traction control, trailer coupling, = Additional options and accessories = - Autoradio - CD - Climate control - Double glazing - DVD - EBS - Electrically operated mirrors - GPS navigation - Heater - Hydraulic power steering - Individual air cooling - Individual lighting - Portable radio set - Refrigerator - Reverse camera Codpfxoy Hv Hms Ailsrd - Sun visor - Tachograph - TV/Video - Xenon headlights = More information = Engine capacity: 10.677 cc Dimensions (LxBxH): 1229 x 368 x 255 cm Make of engine: Mercedes Benz Tyre tread remainder on axle 1: 40%

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 1,500 kg, empty load weight: 333 kg, construction width: 760 mm, Clamp fork Load center: 500 Crsdjzhp Azopfx Ailjd ISO class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: If you have any further questions, please do not hesitate to call us. In addition to this model, we have approximately 150 other forklifts in stock. Feel free to browse our website at fleischmann-foerdertechnik.com. We will gladly provide you with a quote for leasing and financing, as well as delivery at favorable terms. We also offer trade-in options for Linde equipment – even if you do not purchase equipment from us. The indicated operating hours were recorded as of the date of listing. Subject to prior sale, changes, and errors. Fork length 1600mm

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: 0-201-71-5926, For sale as part of the insolvency proceedings 5-axis CNC woodworking center Homag Centateq P-500 Profi BMG511/60/15/F/A, Year of manufacture 2021, with Homag control system, Widescreen TFT monitor Dell and accessories - Main usage approx. 5,200 hours - Secondary usage approx. 2,910 hours - Total operating time approx. 11,960 hours - Operating time approx. 12,050 hours Please contact us to arrange a viewing appointment. Credpszfyxnjfx Ailed (The properties described here in the order confirmation (attachment) only provide an overview of the delivery at the time. The machine will be sold as is at its current location, as it was viewed or could have been viewed.) Stair design software will not be sold with the machine. To the best of our knowledge (without guarantee), the internal HOMAG WoodWop program is installed on the machine and can be continued to be used with licenses purchased from HOMAG.

Condition: ready for operation (used), Streuli SHS15 / STE15 Belt Filter System, Filter System, Filter Dimensions: 1760mm x 1210mm x 1850mm (W x D x H) Weight: approx. 725 kg You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and see our other offers. Crsdpfszhlgvox Ailjd The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2003, Siemens 840D control system Turning diameter 254 mm Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Spindle speed 4,500 rpm 8-position turret Cjdpfezfx Tkex Ailerd Chip conveyor

Condition: new, - Type: Professional deck oven - 5 decks × 3 chambers - 15 openings - Energy source: Triple fuel – gas/wood/diesel - Heating system: Annular tubes for uniform heat distribution - Usable depth: 2,200 mm Credpfxjzhk Rmj Ailed - Condition: Almost new, used only for commissioning and ignition tests - Previous use: No commercial production, only technical tests - Structure: Full stainless steel, durable and easy to maintain - Cooking type: Stone hearth - Controls: Manual adjustment - Operating temperature: Up to 300°C - Insulation: High density, limiting heat loss and consumption - Overall dimensions: Large structure suitable for production workshops - Production capacity: Ideal for high-volume baking (bread, pizza, pastries, etc.) - Overall condition: Excellent

Condition: like new (used), functionality: fully functional, Year of construction: 2015, operating hours: 6,778 h, load capacity: 1,500 kg, lifting height: 6,800 mm, free lift: 1,950 mm, fuel type: electric, mast type: triplex, construction height: 2,850 mm, battery capacity: 1,000 Ah, remaining battery capacity: 100 %, battery voltage: 24 V, DGUV certified until: 06/2027, fork length: 1,200 mm, tire condition: 100 %, Equipment: CE marking, UVV, full service history, lighting, sideshift, Still RX 50-15 electric three-wheel forklift with the following specifications: * Lifting capacity: 1,500 kg * Lifting height: 6,800 mm * Overall height: 2,850 mm * Operating hours: 6,778 * Year of manufacture: 2015 Still 1.5-ton electric three-wheel forklift, open cabin, brand-new battery, new tires, triplex mast with full free lift, side shifter, mini-lever, fork length 1,200 mm, charger new. Upon request, the following option is available at an additional cost: white, non-marking new tires (see photo). Includes 1,000 hours of service according to Still manufacturer’s specifications and a valid UVV inspection upon sale. Inspection, demonstration, and test drive are available by prior appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors, and typos. We can deliver your new forklift cost-effectively using our own ramp-equipped low-loader (transport costs upon request). Further information and offers can be found on our website. Cjdpfeywrrajx Ailord

Condition: good (used), Year of construction: 2014, operating hours: 655 h, fuel type: electric, color: yellow, Drivetrain Drive: Wheel Weights Empty weight: 7.300 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.500 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Remanufactured: Yes Crsdoyxybfjpfx Ailod Delivery terms: EXW Max. horizontal reach: 850 m Max swing of arm in degrees: 180 Max swing of platform in degrees: 360 Transport dimensions (LxWxH): 6,6x1,5x2 Latest inspection: 2026-03-30 Production country: FR Additional information Please contact Rothlehner Arbeitsbühnen GmbH for more information

Condition: used, mileage: 145,697 km, power: 315 kW (428.28 HP), first registration: 06/2025, fuel type: diesel, number of seats: 52, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, power assisted steering, traction control, = Additional options and accessories = - Autoradio - Climate control - Double glazing - EBS - Electrically operated mirrors - GPS navigation - Heater - Hydraulic power steering - Individual air cooling - Individual lighting - Refrigerator - Reverse camera - Sun visor - Tachograph - TV/Video = More information = Engine capacity: 10.677 cc Dimensions (LxBxH): 1229 x 368 x 255 cm Crsdpfszhgifjx Ailjd Make of engine: Mercedes Benz Tyre tread remainder on axle 1: 50%

Condition: good (used), Year of construction: 1995, functionality: fully functional, Press force: 150 t Bending length: 4050 mm Frame width: 3550 mm Cjdpfjzd S Thsx Ailsrd Control system: CYBELEC ModEva Pac Overhang: 350 mm Distance between table and ram: 430 mm Table width: 250 mm Stroke: 250 mm Total power requirement: 18.5 kW Machine weight, approx.: 16500 kg Space requirement, approx.: 4400x2100x3200 mm Equipment/accessories: - Control system upgrade at the end of 2018 - Electric back gauge, 1250 mm - 10-stage die shifting - Crowning - Tool holder EHT 26 mm - Axis control: Y1, Y2, X, R - Sheet metal support table - 4 manually adjustable stop fingers - Pneumatic upper tool clamping - Safety light curtain - 3 adjustable support arms - Oil cooler - 2-hand foot switch

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: Krauss Maffei, hydraulic unit from injection molding machine 90-340 B -Motor: Loher 15 kW 1425 rpm Type: KNGA-160LB-04D IEC160L IMB35 -Individual components: see images -Liter output: unknown -Dimensions: 900/520/H610 mm Csdpogz Iq Uefx Ailjrd -Weight: 261 kg

Condition: used, Humidifier for ventilation construction - Klingenburg A total of 4 pieces are available. The price is per piece! Further details and scope of delivery see photo. Technical data see type plate. Item condition: used, untested Crjdpfx Ajtzxtvoiled condition: used, untested Without OVP Without original packaging Example photos sample pictures A viewing in Wettringen is possible! For further questions you can contact us by email. The sale takes place exclusively to commercial interested parties for commercial purposes and under exclusion of any warranty for material defects and defects of title! With your purchase you confirm that you are working commercially or as a freelancer. Otherwise you violate our terms and conditions!

Condition: new, Year of construction: 2026, neu 2026 Csdpfxjwirldj Ailsrd 070224 September 2026, Zwischenv Türkei 25700 € 490.87 € 15 to 1.4 mm 320 mm 490 mm 130 mm 1 - 40 mm 200 1/min 4 40 mm 30 mm 210 mm 215 mm 1.5 kW 1160 mm 1180 mm 1730 mm 922 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations Symbolic photos, picture incl. optional available bolster plate

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, A laser marker that can operate anything? Indeed! This is the Wattsan UV TT, an ultraviolet marker that works with a variety of materials, including leather, ceramics, glass, rubber, wood, leather, fabric, gems, organic and electrical components. The Wattsan UV TT is suitable for QR-codes, bar-codes, data and time, and any other images. This marker can operate big workpieces; the scanning tripod can be taken off and placed on the deck. Additionally, you may alter the machine's functionality by just switching out the lenses! You can give our managers a call for additional details! Wattsan UV TT machine characteristics: Working area: from 75x75 to 300x300 mm Laser power: 3/5/10/15 W Machine size: 880x420x1000 mm Packing size: 960x500x1100 mm Weight: 82 kg Laser sourse: JPT Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Csdpfx Aer D Ngteilerd Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 20 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: good (used), Year of construction: 2010, Ref. no.: 18637 Csdpsy Tlcwsfx Ailsrd Manufacturer: BUSCH Type: MM 1252 AV (15 Stück) Year of construction: 2010 Further information: Make | Model | Year | Capacity | Frequency | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | BUSCH MINK MM 1252 AV VACUUM PUMPS A total of 15 units Busch Mink MM 1252 AV industrial vacuum pumps are available for sale. The pumps were removed from a running production line and are generally in clean and good cosmetic condition. These high-quality Busch MINK series pumps are widely used in plastics injection molding, central vacuum systems, packaging and automation applications. TECHNICAL SPECIFICATIONS • Manufacturer: Busch • Model: MINK MM 1252 AV • Technology: Dry Claw / Oil-Free Vacuum Technology • Capacity: 250 – 300 m³/h • Final Vacuum: 100 hPa (0.1 bar) • Frequency: 50/60 Hz • Year of Manufacture: 2009 / 2010 • Origin: Germany MAIN ADVANTAGES • Oil-free operating system • Low maintenance costs • Energy-efficient operation • Quiet and reliable performance • Suitable for continuous industrial operation • High Busch quality with worldwide service support APPLICATION AREAS • Plastic injection molding machines • Central vacuum systems • Packaging machines • Thermoforming systems • Automation and conveying systems • Industrial production facilities

Condition: excellent (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, wastewater pump -Dirty water pump: for coarse grit -Drive: 15 kW 980 rpm -Max. flow rate: m³/h -Max. delivery head: m -Dimensions: 1140/470/H505 mm -Weight: 331 kg Crjdszdt E Sjpfx Ailod