Used Fintek Folding Machine for sale (68,209)

Condition: good (used), Creasing and folding machine Heidelberg Stahlfolder + Popp Maschinenbau SRT + MWS Machine in very good condition, ready for production. Like new. Year of production 2012. It was used in the production of invitations, photo book inserts and leaflets. Modular design allows for expansion, e.g. installation of marking printers. Technical data: Paper format min 105 x 150 mm Paper format max 520 x 720 mm Feeding from a high stack Main and cross module with the possibility of installing creasing, perforating and cutting tools. Possibility of installing Heidelberg or Techni-Fold tools, Smooth speed regulation Becker compressor Double sheet sensor Electronic counter with packaging Set of inspection cameras. Dsdpfx Alezmnh Tsbewb

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment Dedpfx Aomck Ryjlbjwb - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, Year of construction: 1994, The Mathias Baeuerle CAS 524 SE, manufactured in 1994, is a machine equipped with four pockets and a flat stack feeder. It features a single cross-cutting unit, enhancing its functionality. This model has a format of 520 x 720 mm and is currently located in Germany, available in storage. Format: 520 x 720 mm Equipment: 4 buckle plates vertical pile feeder 1 Knife Dwodpfx Alov Di Srsbob

Condition: ready for operation (used), Year of construction: 2007, Additional Machine Details: Automatic buckles and roller Navigator control 1st unit : 6 motorized buckles Batch counter Noise hood Round Pile Feeder Till 230 meter per minute Dwjdpfx Aloza Ugdebsb

Condition: new, sheet width 1270 mm plate thickness 2.0 mm daylight opening 48.0 mm daylight opening 150 mm ohne Segmente bending angle max. 0 - 135 ° work height max. 900 mm weight of the machine ca. 465 kg dimensions of the machine ca. 1620 x 1070 x 1280 mm Furnishing: - Swivel bending machines with segm. Upper, lower and bending beam - Universally usable bending machine for sheet metal works and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending possibilities Dsdoxabqujpfx Albowb - Optimum price-performance ratio - Quick and easy bending process using the bow handle - Non-slip rubber covering on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for the production of high folded profiles Scope of delivery : - Segmented upper, lower and bending beam - manual backgauge - Corner segment left / right each 75 mm | 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 200 | 250 | 270mm

Condition: new, sheet width 1020 mm plate thickness 2.5 mm daylight opening 48.0 mm daylight opening 150 mm ohne Segmente bending angle max. 0 - 135 ° work height max. 900 mm weight of the machine ca. 340 kg dimensions of the machine ca. 1350 x 820 x 1300 mm Furnishing: - Swivel bending machines with segm. Upper, lower and bending beam - Universally usable bending machine for sheet metal works and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending possibilities - Optimum price-performance ratio - Quick and easy bending process using the bow handle - Non-slip rubber covering on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for the production of high folded profiles Scope of delivery : - Segmented upper, lower and bending beam Dwedpfx Aoxaa E Dolbeb - manual backgauge - Corner segment left / right each 75 mm | 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 |200 | 270 mm

Condition: used, functionality: fully functional, infeed width: 740 mm, Folding machine MBO K 74/4 KL with flat pile feeder. Paper size: min15x25cm to max. 74x112cm speed: 30-150 m/min Djdpfxjtvfqwj Albowb with belt delivery and compressor. In function, can be tested. Folding rollers renewed in 2017.

Condition: used, Year of construction: 2012, operating hours: 600 h, functionality: fully functional, total length: 3,100 mm, sheet thickness aluminum (max.): 3 mm, overall weight: 4,650 kg, Equipment: documentation/manual, Mechanical CNC folding machine CIDAN Futura 30 Year of manufacture: 2012 Technical data: Working length: 3100 mm Max thickness of steel sheet: 2 mm Max thickness of stainless steel sheet: 1.25 mm Max thickness of aluminium sheet: 3 mm Beam opening: 195 mm Bending beam motor power: 2.2 kW Clamping beam motor power: 2.2 kW Machine dimensions: length 4100 mm, width 2300 mm, height 1845 mm Weight: 4650 kg Equipment: CNC control with ProLink S graphics Dedpfx Alsx Tv T Hjbjwb Powered rear stop type SBG 15-30-T-30L-20R Rotating upper beam type COMBI MULTIFOLD – segmented lower and bending beam tools with SBG 15 table, height adjustable 0–45 mm Mechanical adjustment of the gap between beams Bending beam bar 10 and 20 mm with quick clamping system Lower beam bar Manual crowning compensation of bending beam Three-button foot pedal Info: Price of a new machine with the above-mentioned equipment: 122,900.00 EUR + VAT

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Djdpfezuykvox Albjwb Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: ready for operation (used), Year of construction: 2003, 4 cassettes 1 knive Technical specifications: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High stack feeding Dedpfxexnb N Ho Albowb Configuration: – 4 cassettes on the first module Ti-52 – Mobile delivery Inverter-based, smooth folding adjustment Cassette noise reduction Becker compressor Double sheet sensor Electronic counter with batching Electric delivery with adjustable delivery speed. Spare parts and tools

Condition: good (used), Year of construction: 1989, Bending machine, folding machine, swivel bending machine, die bending machine -Manufacturer: zts, folding machine type XONM.2000/2A-4 -Drive: hydraulic -Max. working width: 2000 mm -Max. sheet thickness: 2 mm -Connected load: 2.2 kW Dwjdpfx Alsmiqm Isbob -Dimensions: Bending machine 2850/1100/H1400 mm / Unit 720/540/H760 mm -Total weight: 2160 kg

Condition: used, We offer for sale a Horizon AFC-744S Cross Folder in used working condition. The machine is currently installed in a printing facility and is available for inspection. It is suitable for professional post-press production and high-quality folding work. Machine details: Manufacturer: Horizon International, Inc. Model: AFC-744S Cross Folder Serial No.: 354002 Configuration: 4 folding cassettes + knife + cassette + knife Maximum sheet size: 738 × 1100 mm Minimum sheet size: 210 × 297 mm Power supply: 400V, 3-phase, 50/60Hz Made in Japan Condition: The machine is in used working condition. It has been installed in a production environment and shows normal signs of use. Available for inspection before purchase. Included: Horizon AFC-744S folding machine 4 folding cassettes Cross-folding knife unit Additional cassette and knife section Feeder and delivery system as shown in the photos Control panel / operating screen Dwedpfx Alezfivvsbjb Additional information: The machine is sold as shown in the photos. Dismantling, loading, transport and installation are not included in the price unless agreed separately. For more information, additional photos, video of the machine in operation, or to arrange an inspection, please contact us.

Year of construction: 2006, condition: ready for operation (used), Two Heidelberg folding systems are available. 1) Stahlfolder Heidelberg 56 system, year of manufacture: 2006, flat pile feeder: FFH-56, min. sheet dimensions X/Y: 140mm/1800mm, max. sheet dimensions X/Y: 560mm/900mm, paper weight range: 40g-250g/m², max. stack height: 800mm, max. throughput capacity: approx. 200m/min, buckle plate station: BUH-56, working width: 560mm, folding roller diameter: 44mm. 2) Stahlfolder Heidelberg 66 system, year of manufacture: 2006, min. sheet dimensions X/Y: 140mm/180mm, max. sheet dimensions X/Y: 660mm/1040mm, paper weight range: 40g-250g/m², max. stack height: 1200mm, throughput capacity: approx. 200m/min, working width: 660mm, folding roller diameter: 44mm. Documentation available. On-site inspection is possible. Dwsdpfoyddzxsx Albjb

Condition: like new (used), Year of construction: 2017, GUK RS 21/070 Roller Folding Machine This automatic machine is an add-on unit for packaging lines. Suitable for brochures with 4 folding pockets. Technical data: Folding unit: 210 mm feed width Output up to 300 sheets/min Min. format (W x L): 60 x 105 mm Max. format (W x L): 210 x 340 mm Manufacturer: GUK Year of manufacture: 2017 Space requirement: 130 x 70 x 80 cm Djdpfxoyuybpo Albowb

Condition: used, Steel folding machine, 4 pockets, 1 blade, delivery table, compressor – all in good condition. Dsdpfxszv Ub Ee Albewb If you are interested, we will be happy to provide you with information about other machines we have in stock. You are welcome to inspect the machine at our premises after prior arrangement.

Condition: good (used), Heidelberg Stahlfolder KH66-6KTL +SKPD 66 + gluer Machine in perfect condition, ready to work. RFH-66 continuous feed BCUH-66 folding module Year of production 2005 6 cassettes 2 electronic knives side cassette with 1 knife SKP.D 66 press auxiliary roller for perforation First rollers divided for gluing Gluing machine with pneumatic nozzles Max format: 660x1200mm two LCD control panels Counter with packaging, speed control, etc. Feeding on a suction roller Soundproofing covers. Dedpfjzlgddjx Albowb Window cassette. Documentation, additional tools and equipment.

Condition: excellent (used), Year of construction: 2003, Edge banding machine SCM Type: Contour Dsdpfszynngsx Albswb

Condition: good (used), Year of construction: 1996, functionality: fully functional, - Manufacturer: MBO - Model: K 820-4KTLT - Machine type: Folding machine (combination folder) Dodjxby Nxopfx Albowb - Format width: 82 cm - Typical application: High-performance folding for large printing sheet formats - Features: 4 folding pockets, KTLT configuration (combination of buckle, knife, and cross fold), high production speed, precise folding results - Areas of application: Industrial printing plants, finishing operations with large-format production

Condition: used, Year of construction: 2009, Folding machine MBO Navigator K800.2/6 S-KTL Dwsdpfjxg Nlmsx Albjb Year: 2009 Description: - 16 page folder - Pallet feeder: FP 120 - Pump: Year 2018 Folding unit MBO K800.2/6 S-KTL - Parallel fold unit with 6 buckle plates - Slitter shaft cassette - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left - Noise hoods for upper folding buckles - Excluding delivery Max. mechanical speed: 10 - 180 m/min Maximum size: 780 x 1200 mm Minimum size: 170 x 250 mm

Condition: used, Year of construction: 1963, machine/vehicle number: 023-0281, Item No. 21275 Manual Swing Bending Machine Technical data: - max. working width 1030 mm - max. material thickness 2 mm - bending angle approx. 0 - 135° - lockable with end stop Dwedjzy Rg Sepfx Albjb - upper beam is operated with a lateral hand crank - max. stroke of upper beam 120 mm - max. adjustment of bending beam 45 mm - bending process is supported by an eccentric weight - space requirement approx. W 1750 x H 1120 x D 450 mm - weight approx. 620 kg

Condition: like new (used), Max. Biegelänge: 1020 mm Djdpfxjd Hx Ico Albswb Max. Blechstärke: 1,2 mm Stahl

Condition: good (used), functionality: fully functional, RAS: Cutting length 1040 mm Sheet metal thickness in steel: 2.5 mm Sheet metal thickness in stainless steel (700 N): 1.5 mm Djdpfxezvcbas Albjwb Back gauge distance: up to 550 mm .....FASTI: Capacity 1020 x 2 mm with pneumatic weight compensation for the bending arms and with finger stop Package price: EUR 4,900.00 net

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 4010 mm 1.5 mm 2 mm 1.5 mm 5 5 1130 mm 180 mm 915 mm 3 kW Dodpfxeyrhtus Albewb 4550 mm 5200 mm 1435 mm 1980 mm 2700 kg 145 ° hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany OPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany. Transport and commissioningat customers place on request.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 1 4010 mm 1.25 mm 2 mm 1.25 mm 4 4 1130 mm 180 mm 915 mm 2.2 kW 5200 mm 1435 mm Dsdpfx Alsyrhqgsbswb 1980 mm 2600 kg 145 ° hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany OPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany. Transport and commissioningat customers place on request.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 5020 mm 1.25 mm 2 mm 1.25 mm 5 5 1130 mm 180 mm 915 mm 3 kW 6200 mm 1435 mm 1980 mm 3000 kg 145 ° hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany OPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany. Dwjdpfoyrhqaex Albob Transport and commissioningat customers place on request.