Used Ferrocontrol Lcd Display for sale (8,558)

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: NR1060NEU, total length: 1,800 mm, sweeping width: 1,060 mm, empty load weight: 477 kg, construction height: 1,350 mm, drive type: Lithium-Ionen, construction width: 1,150 mm, Scrubber Dryer Chassis Number: NR1060NEU Condition: New Equipment Technical Condition: New Front Tyres Condition: New Rear Tyres Condition: New Battery Voltage: 36V Battery Capacity: 200Ah Battery Type: Waterless Battery Year: 2025 Battery Condition: New Description: The NR1060 is a medium to large front-wheel drive scrubber dryer with twin brushes. - Delivers an efficient cleaning performance of 6,890 m² per hour. - The coarse dirt basket in the waste water tank effectively filters large debris to prevent drain blockages. - The entire machine features a modular and compact design for enhanced manoeuvrability and flexibility. - The low centre of gravity, thanks to the water tank and battery positioning, ensures high driving safety and easy maintenance. Dwedpfx Aszydvgol Asc - Integrated waterproof touch panel design for intuitive operation: adjust driving speed, water flow, raise/lower brushes, etc. - Large LCD display shows machine settings and simplifies fault diagnostics and maintenance. - Standard electronic water level indicators for fresh and waste water tanks; intuitive and convenient display. Automatic alarm and shutdown when waste water tank is full. - One-touch soft start for the motor with overcurrent and undervoltage protection for the control electronics. - Patented disc brush quick-release design allows for easy automatic loading and unloading of brushes at the push of a button. - ECO mode reduces energy consumption and noise level – ideal for low-noise work environments. - Operating time of 5–6 hours per charge. - Non-slip, durable tyres ensure secure grip and optimal traction, even on smooth or damp floors.

Condition: new, functionality: fully functional, machine/vehicle number: OVS10NEU, Year of construction: 2026, load capacity: 317 kg, lifting height: 4,600 mm, fuel type: electric, mast type: triplex, construction height: 1,660 mm, empty load weight: 1,350 kg, total length: 1,460 mm, drive type: Elektro, construction width: 800 mm, High-level order picker Chassis number: OVS10NEU Mast type: Triplex Transmission: PMSM Condition: New unit Technical condition: New Front tire type: Polyurethane Front tire condition: New Rear tire type: Polyurethane Rear tire condition: New Battery voltage: 24V Battery capacity: 150Ah Battery type: Lithium-ion Battery year of manufacture: 2025 Battery condition: New Description: - Maintenance-free PMSM drive motors with high efficiency - DC pump and steering units with extended service life and minimal maintenance requirements - Lithium battery: 24V / 150Ah - Maximum platform height: 4,600 mm - Maximum working height: 6,600 mm - Load capacity: 317 kg - 90 kg rear storage compartment - 100 kg front storage compartment - 127 kg operator platform - Drive units with suspension system for improved stability, safety, and comfort - Keyless PIN code panel with RFID card support - Electric lift and lower buttons - High-performance control grips with dual-hand safety operation - LCD display indicating speed, steering mode, operating hours, energy, error codes, etc. - Complies with EU and US regulations - Four different driving modes for various applications - Front-wheel steering for longer distances - Rear-wheel steering for tight and hard-to-reach areas Dwedpezydwdefx Al Asc - Lateral (parallel) travel possible - On-the-spot turning (very high maneuverability) possible - Automatic speed adjustment depending on lift height

Condition: refurbished (used), functionality: fully functional, warranty duration: 12 months, KUKA smartPAD with 0.25 m / 10 m cable Article No.: 0000168334 / 0000231854 / 0000216801 Professionally serviced and refurbished KUKA smartPAD, available with 0.25 m or 10 m cable and prepared for immediate use. Each teach pendant is thoroughly inspected, repaired where necessary and fully function tested before being released for stock. Depending on its condition, worn or damaged components such as the keypad, touchscreen, LCD display, cable or other internal components are replaced to ensure reliable operation. Our goal is not simply to make the panel operational, but to restore its functionality so that all controls, buttons, touchscreen functions and safety elements operate correctly and reliably. Technical information: Manufacturer: KUKA Component: Teach pendant Dwsdpfxszyy I Ej Al Aoc Model: smartPAD Cable length: 0.25 m / 10 m Article No.: 0000168334 / 0000231854 / 0000216801 Condition: Professionally serviced / refurbished Testing: 100% function tested Warranty: 12 months. The smartPAD is in stock and ready for installation as a replacement teach pendant for compatible KUKA robot systems.

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, empty load weight: 12,300 kg, maximum load weight: 28,700 kg, overall weight: 41,000 kg, axle configuration: 8x4, wheelbase: 4,500 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, long cab, high roof, 1 comfort seat, 1 bunk, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, electric roof, auxiliary heater, ABS (anti-lock braking system), traction control (ASR), retarder, PTO (power take-off), automatic transmission, differential lock, fog lights, leaf spring suspension, air and electrical connections for trailer coupling, aluminum tank, hydraulic cross-lock, green environmental badge. Wheelbase: 4,500 mm. Body: With 26t Hyva T26-55-S hookloader suitable for containers from 4m to 6.5m. Transmission: Hi-TroniX 16TX 2440 TO with retarder, stabilizer on front and rear axle, disc brakes on front and rear axle, cruise control, hill-start assist (hill holder), EBS with brake assist system, reinforced parabolic spring on the front axle, parking brake on front axle, reverse warning buzzer, Iveco DAB+ radio with LCD display, fog lights incl. cornering/turning light, lower bunk, AT cab with high roof, electric tilting roof, additional diesel/water heater 4KW, cab insulation Sub Arctic, refrigerator, LED headlights, PTO NH/4C, technically permissible total train weight (zGZG) 60,000 kg! Dsdpfx Alexu E Awo Ajwc Frame length approx. 6,000 mm! Frame height approx. 1,150 mm! Vehicle height approx. 3,760 mm! New vehicle from stock! On request and at extra cost, also available with a different hookloader system! Retrofitting a trailer coupling (AHK) is possible at a net price of €800.00! On request, the engine output can be increased to 580 HP! Day registration on 03.12.2025 ACCESSORY INFORMATION WITHOUT GUARANTEE, Subject to change, prior sale, and errors excepted!

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, empty load weight: 13,300 kg, maximum load weight: 27,700 kg, overall weight: 41,000 kg, axle configuration: 8x4, wheelbase: 4,500 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space volume: 14 m³, loading space length: 5,600 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden. Steel body, long cab, high roof, 1x comfort seat, 1x sleeper, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, electric roof, auxiliary heater, ABS (anti-lock braking system), traction control (ASR), retarder, PTO (power take-off), automatic transmission, differential lock, fog lights, leaf suspension, air and electrical connections for trailer coupling, aluminum tank, drop sides, green emissions sticker. Wheelbase: 4500 mm. Body: Meiller three-way tipper body with chute, approx. 14 m³. Hi-TroniX 16TX 2440 TO transmission with retarder, stabilizers on front and rear axles, disc brakes front and rear, cruise control, hill start assist (hill holder), EBS with brake assist system, reinforced parabolic spring on front axle, parking brake on front axle, reverse warning buzzer, Iveco DAB+ radio with LCD display, fog lights incl. corner/turning light, lower bunk, cab AT with high roof, electric lifting roof, additional diesel/water heater 4kW, cab insulation Sub Arctic, refrigerator, LED headlights, PTO NH/4C, technically permissible gross combination weight (GCW) 60,000 kg! Frame length approx. 6000 mm! Frame height approx. 1150 mm! Vehicle height approx. 3760 mm! Djdpfxoxu E A Do Al Ajwc New vehicle from stock! On request and at extra cost, can also be supplied with a different tipper/body! Retrofitting of trailer coupling possible for an additional €800 net! On request, engine power can be increased to 580 HP! First registration on 03.12.2025 . ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, intermediate sale and errors!

Condition: like new (used), functionality: fully functional, power: 97 kW (131.88 HP), fuel type: diesel, color: yellow, overall weight: 22,950 kg, Year of construction: 2024, operating hours: 500 h, Equipment: air conditioning, cabin, JCB JS 20 MH IndustryPLUS material handling machine with JCB DieselMax 4-cylinder turbocharged diesel engine 4.8 liter displacement with 97 kW (130 hp) Emission standard EU Stage V Equipment * Hydraulically height-adjustable comfort cab * Sun visor (roof window) * 2 x 12-V sockets * Air-suspended and electrically heated comfort seat * SCR (selective catalytic reduction) * 7" LCD color display with rear and side cameras * Protective grille for the windshield 2 mm thick Opening size 25 x 25 mm * 5 x LED spotlights for boom and cab * 3 x rotating beacon lights (1 on the cab roof, 2 on the counterweight) * Electric refueling pump * LiveLink * Telematics system * SS/1594 System Generated * Wheel chocks (in the toolbox) * Coarse-mesh cooler Dsdpfxoy Ivhme Al Aewc * Helical/tube fan * Wastemaster chassis with 2.50 m ZF axles and 4-point outriggers * 8 solid rubber tires * German homologation * Activated carbon filter, fresh air filter for the cab

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 88271, turning diameter over cross slide: 180 mm, turning diameter: 42 mm, spindle bore: 180 mm, spindle speed (min.): 6,000 rpm, travel distance X-axis: 160 mm, travel distance Y-axis: 60 mm, travel distance Z-axis: 260 mm, spindle motor power: 7 W, rotational speed (min.): 60 rpm, rotational speed (max.): 6,000 rpm, total height: 20,330 mm, total length: 3,420 mm, total width: 1,850 mm, type of input current: three-phase, overall weight: 6,000 kg, Equipment: documentation/manual, Control: Brand & Model FANUC 31i Controller incl. Dynamic graphics display, 10.4” LCD Max. diameter Ø 180 mm Max. machining diameter over the body Ø 180 mm Max. turning diameter Ø 180 mm Chuck diameter 6” Max. workpiece length 180 mm Diameter of workpiece bar material Ø 42 mm Spindle motor FANUC α P12i AC Spindle motor power 5.5/7.5kW Spindle speed range 60~6000rpm Guide type Linear & box ways Travel on X1-axis 160mm Travel on X2-axis 160mm Travel on Y1-axis 60mm(±30) Travel on Y2-axis 60mm(±30) Travel on Z1-axis 210mm Travel on Z2-axis 260mm Rapid traverse on X-axis 15m/min Rapid traverse on Y-axis 10m/min Rapid traverse on Z-axis 36m/min Turret Number of positions 12 Number of rotary positions 12 Rotary position speed 4,000 rpm Power of rotary position motor 3.7 kW Tool change time 0.2sec/single step Djdpjzq Rm Tefx Al Aewc OD tool shank size 20 mm ID tool shank size Up to Ø 25mm Live tooling shank size 1~16mm ER 25 collets Total installed power 38 kVA Machine weight 6000kg Dimensions LxWxH 2565x2030x1850mm Dimensions with chip conveyor 3420x2030x1850mm Description of basic package and standard accessories 6” hydraulic cylinder x 2 12-position turret x 2 Fanuc αP12 AC spindle motor Thread cutting/Spindle orientation High-precision NSK linear guides Fanuc AC servo drive motors C3 class ball screw pairs Coolant system with “Grundfos” ¾ HP coolant pump x2 Hydraulic system Protective screen – full enclosure Automatic guide lubrication system Tool holders and sleeves Signal lamp Work lamp M code automatic power off Foot pedal for chuck RS-232 interface Cooler for the electrical cabinet Foundation and leveling elements Machine maintenance tool kit Machine operating manuals Bar feeder (3 m material length)

Condition: used, “Removed from a production facility of an automotive supplier, professionally disassembled.” Quantity: 5 available Device designation: APC Smart-UPS 750VA LCD RM 2U 230V Article number: SMT750RMI2UC Device type: Line-Interactive UPS (Rackmount) Power: 750 VA / 500 Watts Djdpfx Alszlubke Aowc Input voltage: 230 V nominal, voltage range 160–286 V Output connections: 4x IEC C13 Output voltage: 230 V Topology: Line-Interactive with automatic voltage regulation (AVR) Battery technology: VRLA, maintenance-free Bridging time at 250 W load: approx. 13 minutes Bridging time at 500 W load (full load): approx. 4 minutes Charging time: approx. 3 hours to 90% Display: LCD display with status indication and control Form factor: Rackmount 2U, tower configuration also possible Dimensions (H x W x D): 89 mm x 432 mm x 406 mm Weight: approx. 20.9 kg Interfaces: USB, Serial, SmartSlot Management software: PowerChute Business Edition Communication: Supports SNMP network cards

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,159 h, spindle motor power: 7,500 W, spindle speed (max.): 6,000 rpm, overall weight: 4,200 kg, total width: 1,900 mm, total height: 1,900 mm, bar diameter (max.): 100 mm, travel distance X-axis: 150 mm, travel distance Y-axis: 385 mm, controller manufacturer: MITSUBISHI, product length (max.): 3,500 mm, number of axes: 7, This 7-axis Quick-Tech I-42U was manufactured in 2015. It features a maximum bar diameter of 42 mm and a maximum machining length of 250 mm. The machine is equipped with a powerful spindle speed of 6000 rpm and includes an automatic bar feeder. If you are looking to get high-quality turning capabilities, consider the Quick-Tech I-42U swiss type turning machine we have for sale. Contact us for further details. • Control • Mitsubishi M720 CNC • 15" color LCD display • Door with LED indicators • Operational signaling and automatic alarm switch • Built-in communication/interface with bar feeder • CE mark • Guide/manual • Main spindle • Bearing diameter: 100.0 mm • Max bar dia.: 42 mm • Max machining length: 250.0 mm • Collet: DIN-173E42B • Spindle nose: A2-5 • Spindle bore: 44.0 mm • C axis: 0.001° • Counter spindle • Max bar dia.: 42 mm • Max machining length: 100 mm • Collet: DIN-173E-42B • Spindle nose: A2-5 • Speed: 4000 rpm • Power: 3.7 kW • C1 axis: 0.001° • Travels and axes • X: 150.0 mm | Y: 385.0 mm | Z: 250.0 mm | B: 360° • X1: 400.0 mm | Y1: 400.0 mm | Z1: 300.0 mm • Servo motors (X, Y, Z, X1, Y1, Z1): Mitsubishi AC Servo, 1.5 kW each • Indexing from tool position: 0.3 s • Tool change time (cut/cut): 0.6 s • Tool head (main) • Combined type • Tools: 6 external, 5 internal • External tool size: 20.0 × 20.0 mm • Max internal tool: ER20 / 20.0 mm • Driven tools (main) • B axis with 12 driven tools • Power: Mitsubishi AC Servo, 15 kW • Speed: 4000 rpm • Max tool size: ER-20 • Max drilling dia.: 12 mm • Max thread: M10 × 1.5 • Tool head (counter) • Combined type • Tools: 5 external, 9 internal • External tool size: 20.0 × 20.0 mm • Max internal tool: ER20 / 20.0 mm • Driven tools (counter) • Number: 6 (3 axial, 3 radial) • Power: Mitsubishi AC Servo, 1.5 kW • Speed: 4000 rpm • Max tool size: ER-20 • Max drilling dia.: 12 mm • Max thread: M10 × 1.5 • Hydraulic system • Hydraulic motor: 0.75 kW • Max system pressure: 50 kg/cm3 • Lubrication system • Lubrication motor: 25 W • Tank capacity: 2 l • Cooling system • Coolant tank: 200 l • Coolant motor: 1/4 HP • Coolant pressure: 2.5 MPa • Length: 2900 mm (3500 mm including chip conveyor, which is part of the machine) • Standard equipment included Dwsdpszcwxnefx Al Aec • Basic equipment with tools • Tool holder and collet set • Automatic lubrication • Chip remover/chip conveyor (integrated, per dimensions note) • Workpiece removal (shovel) – if integrated • 15" color LCD display • Operational signaling and automatic alarm switch • Guide/manual • Door with LED indicators Additional equipment • Automatic bar feeder, 1200 mm length • Workpiece removal conveyor • Workpiece removal shovel (if provided as an external unit) • Transformer 380–440 V, 60/50 Hz Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 1995, functionality: fully functional, JOSTING EFS 2300 L is a heavy-duty single-knife veneer guillotine designed for accurate cutting of veneer sheets and veneer packs. The machine has been modernized and upgraded with an electronic positioning and control system, improving cutting accuracy, repeatability and ease of operation. Manufacturer: JOSTING Model: EFS 2300 L Machine type: Veneer Jointing Guillotine / Veneer Pack Cutting Machine Cutting length: 2,300 mm Maximum insertion height: 80 mm Parallel fence range: approx. 20–720 mm* Pressure bar: Hydraulic cylinder with two pressure stages Cutter bar drive: Brake motor, gearbox and crank drive Parallel fence: Motor-driven positioning system Djdpfx Alezu Au De Ajwc Connected load: approx. 7.7 kW Machine footprint with parallel fence: approx. 3,640 × 1,700 mm Machine height: approx. 1,700 mm Net weight: approx. 3,000 kg Modernization INCLUDES: Digital LCD display Electronic measurement display in millimetres Numeric keypad for direct entry of required cutting dimensions Automatic positioning of the parallel back fence Programmable cutting dimensions Cutting sequence / step programming functions Electronic adjustment and positioning controls Start/Stop control directly from the operator panel Manual fine-adjustment controls Centralized operator interface combining machine and positioning functions

Condition: new, functionality: fully functional, NEW Perfect DT Series of machines with the touch screen display and easy to use interface. Automatic NC controlled downfeed operation with spark out. Plunge grinding, criss-cross grinding and surface grinding. 300 x 600mm grinding capacity 500mm spindle centre to table 355 x 38 x 127mm grinding wheel Fine pole mag chuck + demagnetiser Coolant system with paper filter and magnetic seperator Dedpfx Alenzh T Ns Aswc NC Auto downfeed control system LCD touch screen control panel with easy to use graphical interface Criss-cross grinding function Auto criss stroke adjustment via the touch screen control Ballscrew and microfeed for the cross feed Stepless variable hydraulic system Quantitive lubrication system Back water splash shield

Year of construction: 2014, condition: like new (used), "EASY PLUS" electronic control from the control panel 2 axes: - Automatic control of the left spindle vertical and horizontal position of the upper spindle. - Selection of the feed speed. - 7 "color LCD display Min.working width (finished size) 25 mm Working width (finished size) 230 mm Dwodpfsh Nvt Uox Al Aec Min.working height (finished size) 6 mm Working height (finished size) 120 mm Min. Length of a single element 450 mm Variable feed speed controlled by an inverter 5 - 25 m / min Pneumatic pressure of the feed shafts Top feed shaft in front of the planer 3kW feed motor power 5.5 kW planer motor power Vertical spindle motor power (single) 11kW Power of the upper horizontal spindle motor 9kW Spindle speed 6000 rpm. Spindle diameter 40 mm Length of the vertical spindles 140 mm Length of the horizontal spindles 250 mm Axial adjustment of the vertical spindles relative to the 40 mm worktable Axial adjustment of the horizontal spindles in relation to the right ruler of 40 mm Min./max. tool diameter on the planer 120 - 140 mm Min./max. tool diameter on vertical spindles 100 - 180 mm Max. Profile on the vertical spindle 40 mm Min./max. tool diameter on the upper spindle 125 (100-180) mm Feed shaft diameter 140 mm Length of the feeding table 2000 mm Quick adjustment of the table at the entrance and 10 mm ruler Manual pump for greasing the STD table

Condition: used, Year of construction: 1998, grinding length 800 mm grinding width 500 mm workpiece height 425 mm total power requirement 15 kW weight of the machine ca. 4,5 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical : GEIBEL & HOTZ CNC Cycle Controlled Precision Surface Grinding Machine model FS 850 GT SL year 1998 Serial no 1012580698 _____ Grinding length max. (table movement 900 mm) 800 mm Grinding width max. (cross movement 500 mm) 500 mm Mounting height under new grinding wheel 425 mm size of magnetic plate 800 x 500 mm Max. table load 1.100 kg Table speed 2 – 28 m/min Cross feed intermittend 3 – 60 mm/stroke Dwedpfx Aljt Hxamj Aoc Cross-/Vertical quick feed 4.000 mm/min Grinding wheel measurements 400 x 100 x 127 mm Grinding spindle-drive approx. 9 kW Total electrical load approx. 22 kW - 400 V - 50 Hz Weight approx. 4.500 kg Accessories / Special Features: • Dialog-guided GEIBEL & HOTZ automatic CNC cycle control model SL for 3 axes. Graphically supported data input in absolute dimensions or via teach-in procedures for preprogrammed grinding and dressing cycles. SIEMENS LCD display with softkeys for setting all parameters and easy monitoring axis movements and work progress. • Electronic handwheel for 3 axes X, Y, and Z, feed rate switchable from 0.01 / 0.1 / 1 mm/rev. • table movement is effected by a rolling ring thread drive (GT), which allows both very high and very low table speeds with constant torque and very high efficiency. • cross and vertical movements are effected by a ball screw drive with incremental glass scale. • Single-point diamond dresser mounted on the table for aut. dressing cycle and aut. compensation • MPM automatic grinding wheel balancing device. • Mounted electromagnet plate 800 x 500 mm with adjustable holding force • Wet grinding facility with universal fleece belt filtration unit • Complete enclosure of the working area with electronically safeguarded sliding doors • sep. switch cabinet, sep. mobile control panel, various accessories, manuals , etc. Condition : very good, with the wide grinding wheel for large surface grinding ! Please click here to view soon a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We do always have a large selection of Grinding machines in stock – please let us know your requirements !

Condition: like new (used), functionality: fully functional, Year of construction: 2023, - Automatic hot mounting press - Product details: Djdot Dvyfjpfx Al Ajwc - corrosion-resistant table model with automatic hydraulic hot mounting - electro-hydraulic automatic system - 7-inch user-friendly LCD touchscreen system - Preset programming and data storage parameters (up to 100 memory locations) - Setting of heating time, cooling time, assembly temperature, pressure build-up and cycle start via the LCD touchscreen - Cooling process - slow cooling, medium cooling and fast cooling mechanism. - Easy replacement of the mold assemblies - Sliding locking mechanism - Automatic water cooling system - Timer buzzer display for heating and cooling cycles - Possible sizes: 1 inch, 1 ½ inch, 2 inch, 30 mm, 40 mm and 50 mm - Power supply: 230 V / 50 Hz - Machine color: 3-Rath design (grey/red)

Year of construction: 2023, condition: as good as new (ex-display), Feeder Media width min. 100 mm max. 216 mm Page size min. 76.2 mm max. 254 mm * Max. 1200 mm in sequential mode Media diameter max. 254 mm Core max. 76 mm Media weight max. 10 kg Laminator Media width Min. 80 mm Max. 195 mm Media size max. length 200 m or 210 mm Outer diameter Inner diameter max. 76 mm Max. outer media diameter: 200 mm max. inside: 25.4 mm Media weight max. 8 kg Cutter System gate cut with cutting plotter Motor Digital servo motor Cutting force 20 - 300 gf in 31 steps Djdpot D E Aiefx Al Ajwc Max. Cutting area No R. mark: 203 mm x 300 mm R. mark: 186 mm x 1200 mm Max. Cutting speed 600 mm / s General data Max. Media diameter separating unit 220 mm Core: 25.4 mm Number of slitters 3 Interface USB2.0 (High Speed) Network (Ethernet 10BASE-T / 10BASE-TX) Display LCD with 128 x 64 pt Power source AC100-120V, AC200-240V 50/60Hz (automatic change) Max. Power consumption 170 VA Operating conditions 10 - 35°C / 35-75% relative humidity (non-condensing) Operating conditions for guaranteed accuracy 16 - 35°C / 35-70% relative room humidity (non-condensing) Dimensions (WxHxD) approx. 1904 mm x 994 mm x 1297 mm Weight approx. 151 kg

Year of construction: 2011, condition: excellent (used), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control – 32-bit controller LCD control panel Digital display for set and actual values Numerical input of set values Error messages in plain text RS 232 interface Free switching channels for product-side test specimen activation Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Thermal radiation: approx. 1000 W at +20°C approx. 200 W at -25°C Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate). The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch. O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air. Djdpezd Rzwjfx Al Aowc Afterwards, the gas is returned to the test chamber via a second flame arrestor. The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix. The gas system is currently deactivated! All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10 %, 3/N, 50 Hz Nominal power: 21.6 kW Rated current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, R 1/2" inner thread Sound pressure level:

Condition: good (used), Year of construction: 2017, 5-Axis CNC Machining Center MAKA DC 7 2 units of MAKA DC 7 for sale. High-performance CNC machining center for 5-axis machining of composite, GRP, and CFRP components, designed with a fixed portal structure. The machining unit is horizontal, and the table is arranged vertically. Machine type: MAKA DC7 Year of construction: 2017 Number of tables: 1 x rotary table for tandem operation Technical data: Travel distances: X-axis: approx. 3,900 mm Y-axis: approx. 1,300 mm Z-axis: approx. 900 mm A-axis: 270° C-axis: 540° Speed: Dwsdpfx Ajzgtyhel Ajc X- / Y- / Z-axis: 60 m/min. A- / B-axis: 10,000°/min. Acceleration: X- / Y- / Z-axis: 3 m/sec² Cube dimensions (working area): X-axis: 2,000 mm Y-axis: 1,000 mm Z-axis: 500 mm Working area (cube dimensions) with a total tool length of 160 mm and a tool diameter of 160 mm. Table design: 1 x steel frame rotary table with dimensions: 1,000 x 2,000 mm. Max. table rotation time: 3 sec. Rotary table with center partition. While one side is being machined, the second side can be loaded or unloaded. 8 units of zero-point clamping systems, 4 units per table side, for quick fixture changes. Vacuum supply: 2 vacuum clamping circuits per table, with vacuum distribution unit, quick-release couplings on the table. 2 vacuum pumps, 1 per table, frequency-controlled, suction capacity approx. 100 m³/h, vacuum tank 250 liters, including frame. Universal head for 5-axis milling with a 90° head and tool change milling spindle C-axis (rotary axis) 540° (+/- 270°) A-axis (swivel axis) 270° (+/- 135°) Speed: 10,000°/min 1 milling spindle HSD Asynchronous motor, water-cooled for tool holder HSK-F63 max. power 12 kW (S1) / 15 kW (S6) max. speed 24,000 1/min Torque support with air supply for angle heads. 1 compressed air nozzle on the milling head, controllable via M-function. Tool changer: 1 carousel tool magazine with 12 positions, mounted on the side. 6 x positions: for tools up to 60 mm in diameter 5 x positions for angle heads and probing system 1 x position for saw blade up to Ø 350 mm. Control system: 1 machine control system Siemens SINUMERIK 840D SL User memory: CNC 3 MB Control panel with 15" display with graphic color LCD, foil keyboard, and mouse. Drives: Rack and pinion drives in the X and Y axes, ball screw drive in the Z axis, A/C axis with hollow shaft drive. Safety: 1 soundproof cabin, with maintenance door, including interior lighting. 1 automatic high-speed roller shutter door. Accessories: Chip guide plates inside the protective enclosure. Extraction system in the working area, to be connected to the extraction system. Receiver for 3D measuring probe. Tool breakage monitoring system. Both machines are assembled and ready for operation and can be inspected. An extraction system from Keller Absaugtechnik, including complete piping, is available. This extraction system was designed for 2 x MAKA DC 7 and is also for sale. We would be happy to prepare an offer for you!

Condition: used, functionality: fully functional, power: 194 kW (263.77 HP), fuel type: diesel, operation weight: 30,620 kg, drive condition: 75 %, Year of construction: 2022, operating hours: 3,656 h, Equipment: UVV, cabin, Hyundai, Crawler Excavator, HX300ANL Year of manufacture: 2022 Operating hours: approx. 3650 ENGINE Cummins B6.7 / STAGE V Engine power: 260 hp (194 kW) at 2200 rpm. HYDRAULIC SYSTEM ELECTRIC POSITIVE FLOW CONTROL (EPFC) 3 Power modes, 2 work modes, user mode Variable power control Pump flow rate control Flow rate control for attachment mode Automatic engine idling Electronic fan control CABIN AND INTERIOR CABIN ACCORDING TO ISO STANDARD Top-mounted windshield wiper Radio/USB player Hands-free mobile phone system with USB 12-V socket (voltage converter 24 VDC to 12 VDC) Electric horn All-weather steel cabin with 360° panoramic view Safety glass, tempered Windshield as a sliding window Sliding glass window (left) Lockable door Heating and cooling box Storage compartment Transparent cabin roof cover Sun visor Door and cabin locks, one key Pre-control pressure-supported joystick Height-adjustable console system AUTOMATIC CLIMATE CONTROL Air conditioning and heating Dwsdpjzdqrpefx Al Aec Defroster Cold weather starting aid (intake air preheating) CENTRAL MONITORING 8" LCD display Engine speed indicator or odometer/accelerometer Engine coolant temperature indicator Automatic power boost function Creep/travel mode Automatic idling Overload warning device Connected engine diagnostics Air filter monitoring Eco indicators Fuel level indicator DEF level gauge Hydraulic oil temperature gauge Fuel preheater Clock SEAT Mechanically sprung, heated driver's seat CABIN WITH ROPS ROPS (Roll-Over Protective Structure) ISO 1211 7-2 SAFETY Main battery switch Rear view camera Four work lights front (2 on boom, 2 on front frame) Driving alarm Automatic swing brake Boom holding system Stick holding system Safety valve for boom cylinder with overload warning device Three exterior mirrors OTHER Removable radiator dust screen for cleaning Removable storage container Fuel preheater Fuel prefilter Self-diagnosis system Hi MATE (Remote Management System) Batteries (2 x 12 V × 100 Ah) Double-acting line set (grapple, etc.) Accumulator for lowering attachments UNDERCARRIAGE Lower frame cover (standard) Bottom plates Triple-grouter bottom plates (600 mm) Track roller guides, 2 each Boom 6250 mm Boom safety valves Stick 3050 mm Stick safety valve Counterweight 5100 kg With bucket linkage Upper carriage for mono boom 2-way lines for hydraulic hammer and grapple, proportional Proportional lines for swivel function Lines for quick coupler Long tracks, narrow frame Track chains 600 mm (3-grouter plate) 20 mm 43-link Long track guide Std. lower frame plates Proportional joystick Air-suspended, heated seat SmartKey + Start/Stop button + Auto-Shutdown Radio and USB Rain protection Fuel filling pump Standard paint finish Standard guard rails Work light front on the cabin (LED) Work light rear LED With work light on the boom (LED) All-Around View Monitoring (AAVM) Driving alarm Standard frame Laminated 7 mm window glass Fuel preheater Central lubrication Beka (Europe) Biodegradable oil Panolin - synt 46 Cyclone air prefilter With quick coupler With 1 bucket

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge on the left, one-hand operation, lockable. Insert shelf: stainless steel, support surface 970 x 980 + 500 mm Load per shelf max. 35 kg Dwodpfxezg Twao Al Aec Total load with max. shelf configuration 100 kg Test chamber lighting: 3x halogen lamp 20 W, 12 V Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface free switching channels for on-site test specimen control Temperature range: -40°C to +180°C Rated voltage: 400V 3/N 50Hz Rated power: 10.4 kW Rated current: 17.2 A Compressor: TFH2516Z Pipe connection NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without radiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, Width 975, Depth 2200 mm External dimensions: Height 1950, Width 1290, Depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain, unpressurized, R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1m from the front) < 55 dB(A) Weight: approx. 1200 kg For your safety as a buyer, here is the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 576308, workpiece weight (max.): 7,500 kg, total height: 3,360 mm, total width: 2,150 mm, total length: 3,600 mm, table length: 1,640 mm, table height: 1,140 mm, feed length X-axis: 1,000 mm, feed length Y-axis: 1,510 mm, feed length Z-axis: 650 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, overall weight: 12,640 kg, Equipment: documentation/manual, CNC SINKER EDM MACHINE – OPS-INGERSOLL GANTRY EAGLE 1200 For sale: a large-format, premium-class CNC sinker EDM machine – OPS-Ingersoll Gantry Eagle 1200. Manufactured in Germany, its gantry structure (Mobile Portal) provides the highest geometric stability and micron-level precision when machining heavy molds and dies. Dedpfx Aszum Ubol Ajwc MACHINE SPECIFICATIONS • Manufacturer: OPS-Ingersoll Funkenerosion GmbH (Germany) • Model: Gantry Eagle 1200 • Serial number: 576308 • Year of manufacture: 2009 • Conformity mark: CE GEOMETRIC PARAMETERS AND KINEMATICS (Axes) Full 4-axis system, digital AC servo drives: • X-axis travel (head): 1000 mm • Y-axis travel (portal): 1510 mm (loading position extended to 1955 mm) • Z-axis travel (slide): 650 mm • Integrated C-axis: 360° rotation, 0.001° resolution, 1–20 rpm speed • Feed rate (X, Y, Z): up to 5,000 mm/min • High-Speed Jump speed: Eagle Power Jump technology up to 18,000 mm/min (18 m/min) WORK TABLE AND MACHINING AREA • Table dimensions: 1140 x 1640 mm • Maximum table load: 7,500 kg (7.5 tons) • Maximum electrode weight: up to 300 kg (manual operation up to 50 kg, automatic operation up to 25 kg) • Work tank: Automatically lifting/lowering tank structure (Lifting container). • Internal tank dimensions: 1270 x 1770 x 680 mm (max. dielectric level: 640 mm) PULSE GENERATOR (Eagle PowerTec) • Technology: Adaptive current control, resistor-less pulse generator. • Pulse shaping: Adaptive waveform (rectangular pulses, modified rectangular pulses, capacitor pulses). • Working current: PT 60 / PT 110 current module (60 A or 110 A depending on the configuration). CONTROL SYSTEM AND HMI COMPUTER • Control model: PC-NC-Dialog (2 x 32 bit), adaptive Eagle PowerTec control with a 17" LCD monitor • HMI unit: Andronic 2060S industrial computer (Intel Celeron M 1.6 GHz, 80 GB hard drive, Soft PLC CoDeSys, InterBus-S). • Operating system: Microsoft Windows® XP® Professional Embedded. • Communication: USB 2.0 ports and Ethernet network interface. • Advanced functions: Orbital erosion, backlash compensation, automatic measuring cycles. • Remote control: PowerTec Handheld with display. AUXILIARY SYSTEMS AND AUTOMATION • Filtration system: Cartridge filters in the base, area approx. 32 m², capacity 2800 liters of dielectric. • Cooling: Compressor unit with a cooling capacity of 7.9 kW. • Lubrication: Automatic centralized axis lubrication. • Safety: Factory-installed fire extinguishing system (16 kg CO₂ cylinder) with automatic monitoring – enables safe unattended operation. LOGISTICAL AND TRANSPORTATION DATA • Transportation dimensions of the machine body (width x depth x height): 2150 x 3600 x 3360 mm • Transportation weight of the machine body: 12,000 kg (12 tons) • Transportation dimensions of the generator: approx. 1800 x 1600 x 2310 mm • Transportation weight of the generator: approx. 640 - 700 kg • Total set weight: approx. 12,640 kg

Condition: new, Year of construction: 2024, total length: 5,600 mm, - Hubraum: 6700 cm³ - Leistung: 168 kW (225PS) bei 1800 U/min - Drehmoment: 1186 Nm bei 1300 U/min - Getriebe: Allison, Typ 3000 - Automatikgetriebe mit 6 Gängen Vorwärts, 1 Gang rückwärts und Lock-Up - Vorderachse Nicht angetriebene Lenkachse, Tragfähigkeit: 10.000 kg (bei 20 km/h), abhängig von der Reifenbewertung - Starrachse: Tragfähigkeit 30.000 kg (20 km/h), Untersetzung 11,98:1, abhängig von der Reifenbewertung - Federung: Vorderachse: Parabelblattfedern in Gummilager mit 2 Teleskopdämpfern Absorber. Wartungsfreies System. Hinterachse: Direkt mit dem Fahrwerk verschraubt - Lenkung: Vollhydrostatisches Orbitrol-Lenksystem und doppeltwirkender Lenkzylinder, Lenkraddurchmesser 350 mm, Wendekreis über Stoßstange vorn 3300mm - Hydrauliksystem: Motorbetriebene Hydraulikpumpe für die Lenkung und Anheben der 5. Radplatte, direkt am Motor montiert, mit Prioritätsventil für das Lenksystem, Fassungsvermögen des Hydrauliköltanks 40 dm3 - Kraftstoff: 300 dm3 - 4,3" TFT-Farb-LCD-Bildschirm mit 480 x 272 Pixel Auflösung - 5 taktile physische Tasten für die Navigation - LED-Hintergrundbeleuchtung mit langer Lebensdauer - CAN J1939 Anschluss - Funktionen zur Datenprotokollierung - Statistikprotokollierung der Fahrzeughistorie inkl. J1939 Informationen Dwedpfx Alszr Rw Io Aoc - Anzeige des Fehlercodes von J1939 Komponenten wie Motor und Übertragung - USB-Anschluss zum Herunterladen von Datenprotokollen und Software-Aktualisierung - Anzeige Display: Tachometer (KM/H oder MPH), Motordrehzahlmesser (U/min), Fahrtrichtungs- und Ganganzeige, Anzeige des Übertragungsmodus, Kraftstoffstandsanzeige (%), Luftdruck 1 & 2 Gauge (bar), Motoröldruck (bar), Temperatur des Motorkühlmittels (°C), Übertragungstemperatur (°C) - Batterien: 2 x 12 Volt / 120 Ah

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optimill F 110 E CNC milling machine, direct from the manufacturer. F 110 E – The OPTIMUM CNC milling machine equipped with Siemens SINUMERIK 808D control, stands out for its performance, speed, precision, and long service life. Dodpfx Aleymkbde Aewc • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Linear guideways with ball circulation for high rapid traverse speeds on all axes • Powerful servo drives on all three axes • Telescopic covers on all guideways • Automatic lubrication • Spindle oil cooler • Solid, precision-ground milling table with three oversized T-slots • The portable electronic handwheel with enabling button and emergency stop switch greatly facilitates program setup • Coolant system with chip flushing and cleaning gun • Chip conveyor with auger design • Chip cart • RJ45 interface and 230 V power connection • Enclosed electrical cabinet with integrated heat exchanger ensures optimal temperature and prevents ingress of dirt particles • Machine lamp providing over 500 Lux in the working area RJ45 Ethernet port 8.4” LCD color display with 800 x 600 resolution Prepared for remote maintenance AST function: enables easy optimization for higher requirements in dynamics and accuracy Absolute encoder / no reference run necessary Higher accuracy Travel distances: X = 650 mm Y = 400 mm Z = 500 mm Dimensions and weights Length approx. 2,100 mm Width/depth approx. 2,300 mm Height approx. 2,750 mm Weight approx. 4,100 kg Boring/milling performance Max. cutter head size: 90 mm Electrical data Connection voltage: 400 V Network frequency: 50 Hz Electrical connection Total connected load: 20 kW Horizontal milling table: Length: 850 mm Width: 400 mm Distance spindle nose to table min.: 100 mm Distance spindle nose to table max.: 600 mm T-slot size: 18 mm Number of T-slots: 3 T-slot spacing: 100 mm Maximum load capacity: 400 kg Accuracy Repeat accuracy: ±0.005 mm Positioning accuracy: ±0.005 mm

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display and has only been used for demonstration purposes. Optimill F50 E CNC milling machine, direct from the manufacturer. F50 E – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D Advanced control stands out with its power, speed, precision, and long service life. • Machine in rigid cast frame design for high stiffness • Carousel tool changer with eight tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drive on all axes (closed loop) • Maximum spindle speed of 10,000 rpm • The portable electronic handwheel with enabling button and emergency stop facilitates program setup significantly • Coolant system with 70-liter coolant tank • Tool change is automatic or by button press (electropneumatic tool clamping system) • Massive, precision-milled work table – large and precisely ground surface • Large access doors designed to minimize cleaning and maintenance time • LED machine light for complete workspace illumination • SIEMENS options package with material defect liability and free on-site OSS service Dwodjymkdxspfx Al Ajc SINUMERIK 808D • Control-identical software package for process reliability • LED tool number display • MCP with rotary switch for feed and spindle override • Absolute encoders – no homing run required • Higher accuracy Control system • 8.4” LCD color display with 800 x 600 resolution SIEMENS OSS options package • 12 months; Item No. 3589010 • 36 months; Item No. 3589012 Dimensions and weights Length approx. 2030 mm Width/depth approx. 1600 mm Height approx. 1980 mm Weight approx. 1900 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 10 kVA Work table horizontal Length 690 mm Width 225 mm Vertical spindle-table distance min. 90 mm Vertical spindle-table distance max. 410 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 63 mm Max. load capacity 150 kg Accuracy Repeat accuracy ± 0.015 mm Positioning accuracy ± 0.015 mm Pneumatic connection Operating pressure 6 bar Travel X-axis automatic 330 mm Y-axis automatic 220 mm Z-axis automatic 320 mm Spindle-column distance min. 280 mm Spindle-column distance max. 280 mm Vertical spindle Spindle taper BT 30 Speed range 10,000 rpm Drive motor power continuous operation S1 3.7 kW Drive motor power S6-30% duty 5.5 kW Drive motor torque continuous operation S1 24 Nm Drive motor torque 30% duty S6 36 Nm Feed rates X-axis 15,000 mm/min Y-axis 15,000 mm/min Z-axis 15,000 mm/min Feed motor torque X-axis continuous operation S1 3.5 Nm Y-axis continuous operation S1 6 Nm Z-axis continuous operation S1 6 Nm Tool changer Type: carousel Number of tool stations: 8 Maximum tool diameter: 100 mm Maximum tool length: 200 mm Maximum tool weight: 6 kg Tool-to-tool change time: 7 s

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 3 Pro CNC milling machine (training machine) directly from the manufacturer. F 3 PRO - The OPTIMUM CNC milling machine with Siemens control SINUMERIK 808D Advanced is characterized by performance, speed, precision and long service life. All linear guides with stainless steel covers Automatic central lubrication Servo drive from SIEMENS in all axes (open control loop) Max. Spindle speed 4000 min-1 Machine light in the work area Portable, electronic handwheel with enabling switch and emergency stop switch. Makes running in programs considerably easier Tools can be changed at the touch of a button Access doors very generously designed to reduce cleaning and maintenance time to a minimum Software package "SINUMERIK 808D on PC" included. (Practical training software so that workpieces can be programmed and simulated offline on the PC. Software can be downloaded free of charge at). SINUMERIK 808 ADVANCED - CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC control. The compact and user-friendly entry-level solution is used for simple milling applications. Features such as simple operation, commissioning and maintenance are the perfect basis for equipping CNC machines. Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments. The small dimensions allow it to be used in compact machines INCLUDED RJ45 Ethernet port 8.4" LCD color display with 800 x 600 resolution Prepared for remote maintenance Dimensions and weights Length approx. 1410 mm Width/depth approx. 1372 mm Height approx. 2007 mm Weight approx. 1000 kg Drilling/milling capacity Cutter head size max. 50 mm End mill size max. 25 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 5 kVA Horizontal milling table Length 620 mm Width 180 mm Distance vertical spindle - milling table min. 50 mm Distance vertical spindle - milling table max. 295 mm T-slots size 12 mm Number of T-slots 3 Dedpfx Aloymkkfe Aswc T-slot spacing 50 mm Load max. 30 kg Accuracy Repeat accuracy ± 0.02 mm Positioning accuracy ± 0.01 mm Coolant system Coolant pump(s) Drive power 95 W Tank capacity 30 l Travel distance X-axis automatic 355 mm Y-axis automatic 190 mm Z-axis automatic 245 mm Vertical spindle Spindle holder BT 30 Speed range 4000 min¯¹ Explanation Speed range Please note that the maximum spindle speed must be reduced by approx. 20 % in continuous operation Power drive motor continuous operation S1 1.5 kW Power drive motor S6-30 % operation 2.2 kW Torque drive motor continuous operation S1 9.5 Nm Torque drive motor 30% operation S6 14 Nm Feed rate Speed X-axis 10000 mm/min Y-axis 10000 mm/min Z-axis 10000 mm/min Feed motor torque X-axis continuous operation S1 1.9 Nm Y-axis continuous operation S1 3.5 Nm Z-axis continuous operation S1 3.5 Nm

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: X7QP000006, paper width (max.): 1,620 mm, Epson SureColor SC-R5010L wide-format resin inkjet printer in good working condition, available for immediate sale. Key Details (from machine label & display): Model: SC-R5010L / K391A Serial No.: X7QP000006 Power: 200–240V / 50–60Hz (European spec, CE certified) Operation Report (as shown on screen): Total Print Area: 38,231.59 m² Total Media Feed Length: 33,162.7 m Total Carriage Pass: 4,060,051 Printer Features: UltraChrome RS resin ink system (6 colours + Optimizer + Maintenance Liquid) Dual bulk ink unit (2 × 1.5L pouches with hot-swap function) PrecisionCore Micro TFP printhead 64" (162 cm) print width Odourless, water-based resin ink – suitable for vinyl, banner, textile, canvas, wallpaper, film Immediate lamination capability LCD touchscreen control panel Nozzle check printed on date of listing (11.03.2026) – all colour channels firing Included: Printer main unit with bulk ink system Auto take-up reel system All ink channels present Extra inks that we have in-house Dodpfxeytrfdj Al Aewc The printer is located on a pallet. Inspection welcome. Suitable for signage, wide-format print shops, wallpaper and production environments.