Used Es 650/175 Hl-V for sale (43,371)

Condition: good (used), Year of construction: 2019, operating hours: 7,650 h, load capacity: 2,000 kg, lifting height: 4,649 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, Linde H20D-02/600 triplex 465 Freelift / Sideshift / Fork positioner 2019 VW Diesel 7,650 hours Video can be sent via WhatsApp. Continuous stock, see website. Prices ex Nuland. Van de Wert Trading B.V. has a changing inventory of machines, trucks, trailers, and attachments. All our deliveries are at trade prices on an AS-IS basis without warranties (see our general terms and conditions). For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance as we are not constantly present. Van de Wert Trading B.V. Podsy Rqflopfx Amkjpt Bedrijfsstraat 3 5391 LR Nuland

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 443 mm, Tested forklift battery for your forklift – 48V 4PZS 620Ah – DIN B + 1 year warranty + Includes Aquamatic system + Includes end discharge cables & REMA 320 connector (other connectors can be fitted on request) + Capacity: min. 90–100% (C5 capacity protocol will be provided upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,035 mm Width: 443 mm Height: 784 mm Weight: approx. 960 kg Suitable for the following models and others: Linde A (1120) - 52-00 Linde K - 5231-00 Linde K - 5231-00 - side extraction Linde K 10 Linde K 10 - vertical extraction Linde K 12 Linde R 10 N - 1120-00 Linde R 10 N - 1120-00 - front extraction Linde R 12 N - 1120-00 Linde R 12 N - 1120-00 - front extraction Linde R 12 N - 136-00 Linde R 14 - 1120-00 Linde R 14 - 376-00 Linde R 14 N - 1120-00 - front extraction Linde R 14 N - 1120-00 - vertical extraction Linde R 14 S N ACTIVE - 115-12 Linde R 14 SN - 115-08 Linde R 14 SN - 115-08 - vertical extraction Linde R 16 AS 1140 - 1120-00 Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - front extraction Linde R 16 N - 113-00 Linde R 16 N - 115-00 Linde R 16 N - 115- - vertical extraction Linde R 16 N HD - 1120-00 - front extraction Pedpfey Rnizsx Amkspt Linde R 16 SN - 115-08 Linde R 20 - 1120-00 Linde R 20 N - 1120-00 - front extraction Linde R 20 N - 113-00 Linde R 20 SN - 115-08 Linde V 10 E - 14 - vertical extraction Linde V 10 E Linde V 12 E - vertical extraction Linde V 12 E - vertical extraction Still EK 11 Still FM 14 N Jungheinrich EKS 312 Jungheinrich ET 214 Jungheinrich ET 216 Jungheinrich ETM 214 Jungheinrich ETV Jungheinrich ETV 112 Jungheinrich ETV 216 Jungheinrich ETV Q Jungheinrich ETV Q 20 Jungheinrich ETV Q 25 Crown ESR 5220 Crown ESR 5220-1.4 Crown ESR 5220-1.6 Caterpillar NR16N2C Hyster K1.0H Steinbock-Boss WR 16 Other common battery sizes available on request. Transport possible.

Condition: used, mileage: 162,426 km, power: 175 kW (237.93 HP), first registration: 11/2010, overall weight: 15,000 kg, fuel type: diesel, color: yellow, axle configuration: 4x2, maximum load weight: 6,625 kg, empty load weight: 8,375 kg, wheelbase: 3,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, onboard computer, power assisted steering, seat heater, soot filter, * German vehicle * Several times available * 1st hand * Condition, see photos * only 9,023 operating hours * Johnston VS650 sweeping & suction superstructure * Disk brush on the right and roller brush in the middle * Sweepings container with V2A floor pan * Tilt to empty the hopper with cable remote control * Road washing device at the front * 1,400 liter water tank * Driver's cab with 2 seats * Air conditioning Ppsdpfxey Rgdkj Amkot * 8-speed manual gearbox * EasyDrive (hydrostatic drive) (SN) * Engine brake * Comfort driver's seat, air suspension * Heated seats * Reversing camera * Electric windows * Heated electric mirrors * Sun visor * Rotating beacon * Exhaust system raised * ABS and ASR * Hill start assist * Differential lock * Leaf/air suspension + raise/lower * Self-propelled work machine Road cleaner * Wheelbase: 3,200 mm * GVW: 15,000 kg * Unladen weight: 8,375 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: good (used), Year of construction: 1994, functionality: fully functional, space requirement height: 2,440 mm, overall weight: 1,480 kg, pressure: 2 bar, total width: 1,300 mm, total length: 1,850 mm, total height: 1,650 mm, filter area: 0.75 m², operating temperature: 200 °C, Enamelled steel filter nutsche Estrella AG, Switzerland Capacity: 760 litres, filter nutsche, suction nutsche, pressure filter Year of manufacture: 1994 Documentation: complete Operational condition: fully functional Diameter: 1000 mm Filter area: 0.75 m² Permitted operating pressure: -1/+2 bar Permitted operating temperature: -10/+200 °C Support structure: upright on legs with subframe Opening: hydraulic opening assistance Enamel quality: blue colour, Email 2000 Estrella Total volume: 760 litres Ppedeu U Afuspfx Amkst Overall height open: 2440 mm Height closed: 1590 mm L x W: 2000 x 1300 mm

Condition: good (used), mileage: 498,798 km, power: 478 kW (649.90 HP), first registration: 07/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, fuel: diesel, brakes: retarder, color: black, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, fridge, navigation system, onboard computer, parking heater, retarder, second fuel tank, soot filter, spoiler, = Additional Options and Accessories = - Roof spoiler - Cab - Air suspension - Particulate filter - Auxiliary heater = Notes = Scania R650 Highline 6x4 - Manual gearbox with retarder - Full air - 2x tank Year of Manufacture: 20-7-2020 Mileage: 498798 YS2R6X40005591186 Ppedpfxsy Hq E Rj Amkst 6x4 Manual gearbox Retarder Full air suspension 2x tank Navigation system Refrigerator = Further Information = Technical Information Number of cylinders: 8 Transmission Gearbox: Opti Cruise, 12 gears, automatic Axle Configuration Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Max. axle load: 9000 kg; Steered; Tire tread depth left: 40%; Tire tread depth right: 40% Rear axle 1: Tire size: 315/70R22.5; Double tires; Max. axle load: 13000 kg; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Rear axle 2: Tire size: 315/70R22.5; Double tires; Max. axle load: 13000 kg; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Weights Unladen weight: 10,664 kg Payload: 24,335 kg GVWR: 34,999 kg Condition Technical condition: good Optical condition: good

Condition: used, operating hours: 8,107 h, mileage: 155,642 km, power: 175 kW (237.93 HP), first registration: 11/2010, overall weight: 15,000 kg, fuel type: diesel, color: yellow, axle configuration: 4x2, maximum load weight: 6,742 kg, empty load weight: 8,375 kg, wheelbase: 3,600 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, onboard computer, power assisted steering, seat heater, soot filter, * German vehicle * Several times available * 1st hand * Condition, see photos * only 9,097 operating hours * Johnston VS650 sweeping & suction superstructure * Disk brush on the right and roller brush in the middle * Sweepings container made of V2A * Tilt to empty the container with cable remote control * Road washing device at the front * Water tank * Driver's cab with 2 seats * Air conditioning * 8-speed manual gearbox * EasyDrive (hydrostatic drive) (SN) * Multifunction steering wheel * Engine brake * Comfort driver's seat, air suspension * Heated seats * Reversing camera * Electric windows * Heated electric mirrors * Radio CD * Sun visor * Rotating beacons * Exhaust system raised * ABS and ASR * Hill start assist * Differential lock * Leaf/air suspension + raise/lower * Self-propelled work machine Road cleaner * Wheelbase: 3,200 mm * GVW: 15,000 kg * Unladen weight: 8,258 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Ppjdsvhpnzspfx Amkjt Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, operating hours: 8,454 h, mileage: 108,922 km, power: 175 kW (237.93 HP), first registration: 11/2012, overall weight: 15,000 kg, fuel type: diesel, color: yellow, axle configuration: 4x2, maximum load weight: 6,522 kg, empty load weight: 8,478 kg, next inspection (TÜV): 11/2022, wheelbase: 3,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, * German vehicle * Several times available * 1st hand * Condition, see photos * only 8,454 operating hours * Johnston VS650 sweeping & suction superstructure * Disk brush on the right and roller brush in the middle * Sweepings container with V2A floor pan * Tipping for emptying the hopper with cable remote control * Road washing device at the front * 1,400 liter water tank * Driver's cab with 2 seats * Air conditioning * 8-speed manual gearbox * EasyDrive (hydrostatic drive) (SN) * Multifunction steering wheel * Engine brake * Comfort driver's seat, air suspension * Heated seats * Reversing camera * Electric windows * Heated electric mirrors * Sun visor * Rotating beacon * Exhaust system raised * ABS and ASR * Hill start assist * Differential lock Ppjdsvhpmqspfx Amket * Leaf/air suspension + raise/lower * Self-propelled work machine Road cleaner * Wheelbase: 3,200 mm * GVW: 15,000 kg * Unladen weight: 8,478 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: new, WM210V - ROGI VARIO METAL DRESSING BENCH 230V-1Phase Turning diameter above bed ----- 210 mm Turning diameter above cross support ----- 110 mm Center height ----- 105 mm Center distance ----- 400 mm Bed width ----- 100 mm Psdpega Txcefx Amkept Cross support travel ----- 75 mm Reverse motion of tool support ----- 55 mm Permeate main axis ----- 21 mm Main shaft connection ----- MK3 Speed range spindle ----- variable 50 - 2500 rpm Thread cutting withworth ----- 10 - 44 TPI (8) Thread cutting metric ----- 0.5 - 3 mm (10) Travel pinole ----- 60 mm Diameter pinole ----- 30 mm Pinole fitting ----- MK2 Motor power ----- brushless 600 Watt Weight ----- 75 kg STANDARD ACCESSORIES * 3 chuck 100 mm - self-centering * 4-way chisel holder * Drip tray * Back panel * Shielding chuck * Shielding spindle * Chisel support shield * Set of casters * Digital speed readout * Fixed centers * Left / Right switch * Tools in a box OPTIONS * 4 Chuck 100 mm - independent * Flange for 4-jaw chuck 100 mm * Fixed glasses WM210V * Separate glasses WM210V * Clamping plate WM210V * Support box WM210V

Condition: good (used), mileage: 733,853 km, power: 478 kW (649.90 HP), first registration: 05/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 3,150 mm, fuel: diesel, brakes: retarder, color: green, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 9,500 kg, Year of construction: 2020, Equipment: AdBlue, Bluetooth, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, navigation system, onboard computer, parking heater, retarder, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Rear work lights - Front work lights - Heated mirrors - Roof spoiler - Differential lock - High beam - Windscreen - Enclosed cab - Leather interior - Leather upholstery - Air suspension - Particulate filter - Side skirts - Auxiliary heater - Power take-off (PTO) = Notes = Pjdpfjyv U E Hjx Amkspt Scania R650 Highline 6x2 - Retarder - PTO/Hydraulic - Custom interior - Full air suspension - 3.15 m wheelbase Model year: 20-5-2020 Mileage: 733,853 km VIN: YS2R6X20005585041 PTO & hydraulics Retarder Fully custom interior Camera system for wide loads Full air suspension 3.15 m wheelbase Etc. = Further Information = Technical Information Number of cylinders: 8 Transmission Transmission: Opti Cruise, 12 speeds, automatic Axle Configuration Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Max. axle load: 8,000 kg; Steered; Left tire tread: 50%; Right tire tread: 50% Rear axle 1: Tire size: 315/70R22.5; Twin tires; Max. axle load: 11,500 kg; Inner left tire tread: 50%; Outer left tire tread: 50%; Inner right tire tread: 50%; Outer right tire tread: 50% Rear axle 2: Tire size: 315/70R22.5; Twin tires; Lift axle; Max. axle load: 9,500 kg; Inner left tire tread: 50%; Outer left tire tread: 50%; Inner right tire tread: 50%; Outer right tire tread: 50% Weights Unladen weight: 10,598 kg Payload: 18,402 kg Gross vehicle weight: 29,000 kg Interior Upholstery: Leather Condition Technical condition: Good Optical condition: Good

Condition: used, Year of construction: 2026, Overview This blowmoulder, filler and capper combiblock was manufactured by ACMI (Italy). The machine can be operated fully floor level and is a very good solution offering the advantage of a dual-cavity design (one mold = two bottles up to 70mm diameter) achieving an up to 17% reduced footprint vs equivalent output from traditional single-cavity equipment, improving production line accessibility. The increased output on smaller formats allows better utilisation of downstream equipment in the production line, resulting in improved ROI of total investment (100% additional output on smaller formats with less than 36% additional CAPEX). The BLO2FILL ESF 12/120/20 is designed for the production of PET bottles and subsequent filling and capping in a single integrated system. The machine is suitable for carbonated water, still water and carbonated soft drinks.  Technical data Capacity: up to 48,000 bph (500 ml PET) Formats: 500 ml PET bottles Application: Blowing, filling and capping of PET bottles Configuration: Rotary stretch blow moulding machine SBF412 (2-cavity configuration) Electronic-volumetric filler with 120 valves Fully electronic capper (FEC) with 20 heads Neck finish: 26/22 GME 30.40 Cap type: Plastic screw flat / press-on caps Filling technology: Electronic-volumetric Products: Carbonated water, still water, carbonated soft drinks CO₂ content: up to 8.5 g/l Max. filling temperature: up to 18°C (carbonated water), 25°C ambient, 12°C (soft drinks) Scope of Delivery Blowmoulder | Acmi | SBF412 | Rotary stretch blow moulding machine (2-cavity) - 100% r-PET and lightweight preform compatible Filler | Acmi | ESF | Electronic-volumetric filler with 120 valves Capper | Acmi | FEC | 20-head capper for screw and press-on caps Cap Feeder | Operator level waterfall orientation and feeding Preform orienter |Operator level preform feeding Preform insertion control | Control system Blowing air recovery system | For pre-blow and line Cooling system | Water recirculation on combo interface Automation package | PLC teleservice, Ethernet, UPS, remote access Lubrication system | Automatic centralized lubrication Foaming unit | Automatic system Pjdpfx Ajyzc Hpomkopt

Condition: new, maximum load weight: 15,825 kg, overall weight: 20,500 kg, axle configuration: 2 axles, loading space length: 6,550 mm, loading space width: 2,550 mm, total width: 2,550 mm, Equipment: ABS, You will find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Partial list of equipment. Full equipment details available upon request. Chassis: * Steel welded construction with welded longitudinal beams and through Z cross-members, narrow cross-member spacing for high floor load capacity * Ramp storage between the longitudinal beams behind the axle assembly, under the loading floor, with two insertion pockets for one loading ramp each, locking plate in rear header Underrun Protection: * According to EU regulations Front Landing Legs: * Landing legs with single-sided operation Rear Support: * Two adjustable drop-down supports Axles: * 2 x 10 t air suspension axle assemblies by SAF, drum brakes approx. 300 x 200 mm, centrally mounted wheels for twin tires, ABS, total air suspension travel approx. 200 mm (lift approx. 140 mm, lowering approx. 60 mm), control via hand lever with latching function Tires: * 8 units, 235/75R 17.5 – make of our choice, on steel rims 6.75 x 17.5, mounted with offset Pjdpfx Aoy Auhbjmkept Splashguards: * PVC, fitted in front of and behind the axles as per EU regulations Load Securing: * Around the outer frame, one hole every approx. 150 mm for lashing straps, lashing force approx. 2.5 t (lashing straps can be hooked in with the side walls closed, chamfered outer frame) * 6 pairs of folding lashing rings, evenly distributed, lashing force approx. 8 t * Stake pockets for 80/50 plug-in posts: 3 pairs of stake pockets on the outer frame, evenly distributed Brake System: * Pneumatic brake system in accordance with EU regulations with EBS * Two coiled lines for connection to the towing vehicle, red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm thick Z-type hardwood floor recessed into the outer frame Front Wall: * Made from 25 mm side wall, removable Lighting System: * Lighting according to EU regulations, 24 volt, multi-chamber tail lights, license plate lights, side marker lights, and lane marker lights at the rear, connection plate on the left at drawbar including connection cable with 15-pin and 2 x 7-pin plugs Accessories: * 2 wheel chocks with holder * Removable beacon at the rear * Supplied with an additional 40 mm towing device (GVW max. 13,500 kg) Painting: * Chassis shot-blasted, cleaned and hot-dip galvanized to latest technical standards * Body parts cleaned, primed, and hot-dip galvanized Chassis: * Hot-dip galvanized + RAL 3002 carmine red * Side walls: RAL 3002 carmine red * Kinnegrip stakes: RAL 3002 carmine red * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Attachments: galvanized / KTL black Conspicuity Marking: * According to EU, yellow on sides and rear Including Special Accessories: * Rear extension by approx. 800 mm incl. underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable drawbar adjustable in length, 6 x approx. 100 mm, bolted drawbar eye approx. 50 mm, according to DIN 74053 * 4 rows of crosswise stake pockets on the loading platform, evenly distributed * 12 galvanized plug-in stakes, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1x20' container, extendable to approx. 2,820 mm, as per ISO 1496, EN 284, or EN 452 * 1 pair aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles * 6 pieces of

Condition: new, maximum load weight: 16,180 kg, overall weight: 20,500 kg, axle configuration: 2 axles, total width: 2,480 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Below is an excerpt from the equipment. Full specification available upon request. Chassis: * Steel welded construction made of welded longitudinal beams and punched-through Z cross members; close cross member spacing for high floor load capacity * Ramp holder: Between the longitudinal beams, behind the axle assembly, under the loading floor, two slide-in pockets for loading ramps (one per pocket), with cover plate in the rear head frame Underrun protection: * In accordance with EU regulations Landing legs: * Front: landing legs with single-sided operation * Rear support: two adjustable drop legs Axles: * 2 x 10 t air suspension axle assemblies, brand SAF, approx. 300 x 200mm drum brakes, center-bored for twin tires, ABS, total air suspension lift approx. 200mm (of which raise approx. 140mm, lower approx. 60mm), manual lever control with detent function Tyres: * 8 units, 235/75 R17.5 - brand of our choice. Mounted on 6.75x17.5 rims with offset Splash guards: * PVC splash guards in front of and behind the axles as per EU regulations Load securing: * On the outer frame, boreholes for lashing straps at approx. every 150 mm, lashing capacity approx. 2.5 t * 6 pairs of folding lashing rings evenly distributed, lashing capacity approx. 8 t * Stake pockets for 80/50 insert stakes: 3 pairs on the outer frame, evenly distributed Brake system: * Compressed air brake system according to EU regulations with EBS * Two coils as coupling to the truck, red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z hardwood floor recessed into the outer frame Lighting system: * Lighting system according to EU standards, 24 Volt, multi-chamber rear lights, license plate lights, side marker and lane departure lights at the rear, connection plate left at the drawbar, including connecting cable with 15-pin and 2 x 7-pin connectors Accessories: * 2 wheel chocks with holders * Detachable flashing beacon at the rear Ppsdpfx Amoy Auf Tjket * 40 mm towing device supplied (GVW max. 13,500 kg) * Rear extension approx. 800 mm including underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable rigid drawbar in length, 6 x approx. 100 mm increments, with bolted 50 mm towing eye per DIN 74053 * 4 rows of stake pockets across the loading area, evenly distributed * 12 galvanized pipe insert stakes, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1 x 20' container * Container locks 1 x 20' extendable to approx. 2,820 mm, compliant with ISO 1496, EN 284 or EN 452 * 1 pair of aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles Paintwork: * Chassis shot-blasted, cleaned, and high-quality hot-dip galvanized to the latest technological standard * Body components cleaned, primed, and hot-dip galvanized * Chassis: hot-dip galvanized + RAL 9011 graphite black * Outer frame: hot-dip galvanized + RAL 9010 pure white * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Fittings: galvanized / KTL black

Condition: used, Year of construction: 2016, Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  Capacity: 12 – 14 cycles/min (tray former) Application: Carton forming and sealing Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing Utilities: Voltage: 3 × 400 V Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) Air pressure: 0.6 – 1.0 MPa Rated current: 2 A (tray former), 3 A (case sealer) Scope of Delivery  Tray former | SOCO SYSTEM A/S | BE 2200 ATS R | 2016 | Automatic tray former with pneumatic forming system and HMI control Case sealer | SOCO SYSTEM A/S | T-402 | 2016 | Automatic tape case sealer with conveyor integration Podsyxxxvopfx Amkjpt

Year of construction: 2025, condition: new, functionality: fully functional, We are offering this new LOWA GmbH Filling and Capping Systems capping machine, model WK12-17, bottle filling and capping machine, year of manufacture 2025. Manufacturer: LOWA GmbH Filling and Capping Systems Model: Capping Machine WK12-17 Machine type: Bottle Filling and Capping Machine Year of manufacture: 2025 Condition: new Ppodpfx Asyybh Asmket Category ID: 679 If you have any questions or need more information, feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 63,929 h, clamping force: 2,000 kN, controller manufacturer: ENGEL, controller model: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, a tie-bar distance of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with dual injection units, hydraulic locking system, and a rotary table control, it ensures precise and efficient operation. If you are looking to get high-quality injection molding capabilities, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for more information. • Condition: Well-maintained and serviced • Clamping unit: • Mold weight: 1500 kg • Total weight: 3000 kg • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mold height: 450 mm • Max. mold height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Return force: not specified • Centering diameter (A side): 110 mm • Centering diameter (B side): 90 mm • Locking system: Hydraulic / Pneumatic • No. of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection speed: 120 g/s • Plasticizing rate: 41 g/s • Nozzle orifice: 15 mm • Pump installed: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection speed: 60 g/s • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump installed: ~6.8 kW • Controls and functions: • SPC (Statistical Process Control): Yes • Pressure interface: Yes • 2nd injection barrel: Yes • Mold monitoring: No • Special programs: Yes Additional equipment • Take-out device (robot): ERC 23/1-E Psdpfjyf Htyox Amkopt • Travels: X = 500 mm, Z = 1400 mm • Max. mold dimensions (Y-axis): 1000 mm • Hot runner control: 18 zones • WZ sensor system: p–z–t–σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Condition: ready for operation (used), Year of construction: 2004, operating hours: 96,194 h, clamping force: 2,000 kN, screw diameter: 40 mm, injection weight: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine. • Configuration: 2K (two-component injection molding machine) • Clamping unit: • Platen dimensions (H x V): 920 x 760 mm • Mold installation height (min): 500 mm • Opening stroke: 750 mm • Max. daylight (platen distance): 1150 mm • Max. mold weight: 3000 kg (1500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1946 bar • Shot volume (swept): 251 ccm • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection unit 2 (Secondary - 200W): • Screw diameter: 25 mm • Injection pressure: 2089 bar • Shot volume (swept): 69 ccm • Shot weight (PS): 60 g • Screw speed: 480 rpm Pjdjyfrb Njpfx Amkopt • L/D ratio: 24 • Interfaces/Control: Printer interface; process control available Additional equipment • Robot system: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1000 mm • Z-axis stroke: 1600 mm • Hot runner control: 16-zone

Condition: ready for operation (used), Year of construction: 2001, operating hours: 98,780 h, clamping force: 2,000 kN, overall weight: 12,200 kg, controller manufacturer: ENGEL, controller model: CC100, This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie-bar distance of 920 x 750 mm. Equipped with dual injection units, screw diameters of 40 mm and 25 mm, and a rotary table control. Consider the opportunity to buy this Engel ES650H/200W-200HL-2F hydraulic injection moulding machine. Contact us for more information about this machine. • Clamping unit • Mold weight (WZ): 1500 kg • Total moving weight: 3000 kg • Minimum mold height: 550 mm • Mold opening stroke: 700 mm • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1250 mm • Ejector stroke: 150 mm • Ejector force: 61 kN • Centering ring diameter A-side: 110 mm • Centering ring diameter B-side: 90 mm • Mold locking system: Hydraulic / Pneumatic • Core pull control: Yes • Number of cores: 4 (A-side) • Rotary table control: Yes • Index plate control: Yes • Injection unit 1 (Main) – Type 650H • Max. shot volume: 200 cm³ • Stroke volume: 251 cm³ • Screw diameter: 40 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1930 bar • Injection rate: 142 g/s • Shot weight (PS): 216 g • Plasticizing rate: 26 g/s • Nozzle orifice: 15 mm • Pump motor: 30 / 12.3 kW • Injection unit 2 (Secondary) – Type 200W • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 104 g/s • Shot weight (PS): 60 g • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump motor: ~6.8 kW • Machine axes travel • X-axis (injection unit): 500 mm • Y-axis (rotary table / mold carrier): 1000 mm • Z-axis (clamping unit): 1400 mm • Equipment and options (machine-integrated) • SPC / Process control: Yes • Pressure interface: Yes • Second injection barrel: Yes • Mold monitoring: No • Cavity pressure sensor: p-θ-t-θ (Priam) • Hot runner control: 16 zones • Filter dryer: No • Special programs: Yes • Special option: GealanXcomp Podpfx Asyf H Nnjmkspt • Automation: No • Condition • Well-maintained and serviced Additional equipment • Engel Linear Take-out Robot ERC 23/1-E (included)

Condition: used, mileage: 382,000 km, power: 115 kW (156.36 HP), first registration: 01/2009, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, emission class: euro4, number of seats: 2, total length: 7,470 mm, total width: 2,600 mm, total height: 3,350 mm, loading space volume: 29 m³, loading space length: 5,100 mm, loading space width: 2,460 mm, loading space height: 2,300 mm, Year of construction: 2009, Equipment: ABS, tail-lift, * Suspension = leaf/air * Body manufacturer = Kiesling * Side door to load compartment on right side * Cab = short, for local distribution * Seats: 2 * Refrigeration unit manufacturer = Thermo King type V500 * Tail lift manufacturer = MBB Hubfix, length 1,820 mm * Tail lift capacity = 1,000 kg * Aluminium chequer plate floor * Movable partition wall * 2 rows of load securing rails Podpfx Ameywp Uxjkjpt

Year of construction: 2015, condition: repair required (used), functionality: limited functionality, total length: 13,000 mm, total width: 4,520 mm, total height: 2,550 mm, machine/vehicle number: 201507-025, WATERJET CUTTING MACHINE & BONDING STATION: The system is part of a larger production line; please also refer to our other listings. In this offered system, EPS/XPS raw panels (manually loaded in the feed magazine) are bonded end-to-end into a continuous strand. Subsequently, formatting is carried out with the waterjet cutting machine, including cut-outs and groove milling. An ejector station and belt conveyor at the end of the line are also included in the scope of supply. RAW MATERIAL DIMENSIONS: Length: 1500mm - 2500mm Width: 600mm - 1250mm Height: 20mm - 50mm Ppjdpfsytp U Aox Amkot WATERJET CUTTING MACHINE: cut Expert variojet (Manufacturer: expert international GmbH, formerly expert systemtechnik GmbH) INCLUDES: Adhesive unit (Nordson), milling spindle (Jäger)

Condition: good (used), Year of construction: 2002, Engel ES200/45VTHL-PRO-ELAST (2002) Ppsdevy Anxspfx Amket Clamping force: 45 t Type: Vertical Drive: Hydraulic Machine for Rubber.

Condition: used, Year of construction: 2016, Overview This compact capping machine was manufactured by the German company ALWID in 2016. Major components are made of stainless steel. It is designed to process t-cork glass bottles as an inline system. The machine is equipped with a capping head for Ø34/19 mm and height 22/13 mm t-corks. Due to our relation to ALWID, we can offer change over parts for different bottles and caps immediately.   Technical data: Mobile stainless steel frame T-cork head for Ø34/19 mm and height 22/13 mm cap-chute for Ø34/19 mm and height 22/13 mm Sorting unit via vibrating feeder bowl with noise insulation hood Conveyor belt Stopper Protective housing with safety switch Electrical control via SIEMENS Logo Podpexb Uncjfx Amkspt

Condition: used, Year of construction: 2004, Overview  The swing top closing machine was built in 2004 by the German manufacturer Rico. The machine is still in operation and can be inspected at any time.  Technical data  Output: 12,000 bottles/h  Formats: 0.33 l (Steinie bottle)  14 capping stations  Running direction: clockwise Touch panel for operation  Control system: Siemens S7  Ppedpeqqz T Rjfx Amket

Condition: used, Year of construction: 2015, Overview The Zalkin screw capper top is made of stainless steel and has 22 capping heads. The running direction is from left to right (clockwise). It comes with an electronic height adjustment. 28 mm aluminum closures have been processed. The maximum output is 36,000 bottles per hour. Tech Specs: Pitch circle diameter 731.11 mm Number of closing elements 22 Pitch 104,4mm Running direction left-right (clockwise) Material: SST Electronic height adjustment Closures: 28mm aluminum closures Accesories: Six new closing elements Closure sorting unit Spare parts lists and technical documentation Ppodel Hxzkepfx Amkot

Condition: used, Year of construction: 2000, Overview  The swing top closing machine was built in 2000 by the German manufacturer Rico. The machine was running until January 2025 and is now stored in the company. Technical data  Capacity: 20,000 bottles/h  Formats: 0.33 l Swing-top glass bottle 10 capping stations  Running direction: clockwise Operation via OP17 Control system: Siemens S7  High pressure injection system Locking pressure control Ppsdpfx Aewhwtqomket

Condition: used, Year of construction: 2004, Overview  This semi-automatic corking machine was manufactured in 2004 by the Italian company Borelli. The ALEXA S15 model is designed for medium-sized production facilities handling various glass bottle formats between 0.375 L and 2 L. The machine is in working condition, easy to operate, and suitable for wineries or producers of cork-closed beverages. Technical data Application: Glass bottles with natural or synthetic corks Capacity: Up to 1,050 bph Bottle Volume Range: 0.375 L – 2.0 L Bottle Diameter Range: 60 – 160 mm Bottle Height Range: 240 – 370 mm Cork Diameter Range: 21 – 29 mm Cork Height Range: 33 – 45 mm Height Adjustment: Manual turret height adjustment via rear control wheel Distance from bottle mouth to centering head: 15–25 mm   Ppedpfeyb S Hdjx Amket