Used Eisele Vms-Iii-S-Hyd for sale (70,354)

Year of construction: 1992, condition: excellent (used), Transmission of power hydropneumatic / hydraulic Rcsdpfofcbb Hox Amysd

Year of construction: 2009, condition: used, Sawing system for aluminum with 2 saw motors that independently perform a 45° cut. Redoqzmnuspfx Amyocd Material feed unit with up to 8,100 mm Cross conveyor, storage table, chip conveyor and extraction Soundproof cabin Control via Siemens S7 panel Operating instructions etc. available, further technical data on request Machine was in operation until dismantling Further technical data on request or see photos

Condition: used, Year of construction: 1994, functionality: unexamined, machine/vehicle number: 171982, saw blade diameter: 350 mm, main saw diameter: 350 mm, We offer this used EISELE LMS 350 P cut-off saw, year of manufacture 1994. Manufacturer: EISELE Model: LMS 350 P Serial number: 171982 Year of manufacture: 1994 Voltage: 380 V With double-button control and pneumatic clamps Equipped with a wood blade Rcodpfx Ajy D H Dwemysd If you have any questions or need further information, please feel free to send us a message or give us a call.

Year of construction: 1967, condition: used, machine/vehicle number: 9317, disk of circular saw-Ø: 275 mm cutting area at 90°: 120 x 75 mm cutting area at 45°: 90 x 65 mm rotations of disk: 2000 rpm Rcjdpfxjb N Eicj Amysd engine: 380 V, 1,1 kW space needed: 700 x 900 x 1000 mm

Condition: used, Year of construction: 2001, Hydropneumatic operation Profile height: 210 mm under hold-down Max. stamping height with double-adjustable punching heads: 145 mm Abutment height: 150 mm Rcjdpfsyu Rztsx Amyed Weight: approx. 400 kg

Condition: used, Year of construction: 2009, Hydraulic operation Rsdpfxeyu Rw Ij Amyecd Profile height up to 210 mm under hold-down Max. stamping height with double-adjustable punching heads: 145 mm Abutment height: 150 mm Weight: approx. 450 kg

Year of construction: 2006, condition: good (used), for processing aluminium and PVC profiles in facade and structural construction Mitres in 3 planes, also suitable for use as a compound crosscut saw Processing of profiles up to 300 mm width at 90°, sharp mitres up to 30° Notching depths horizontally up to 185 mm and vertically up to 230 mm at 90° Notching width at 90°: 300 mm, profile height up to 280 mm Motorised height adjustment for notching, positioning with electronic digital display Saw blade swivel range vertical 60° - 90° - 25° (front/centre/rear), motorised positioning with electronic digital display Rcedeyz T A Uspfx Amyod Saw blade swivel range horizontal with vertical blade 45° - 90° - 45°, motorised positioning with electronic digital display

Condition: good (used), Year of construction: 1995, machine/vehicle number: 9131, Offer 26050 Redpfx Ajyz Tqromyscd Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm - Notching width at 90° up to 280 mm - Notching width at 30° up to 100 mm - Vertical saw blade manually swivellable from 90° - 30° via hand wheel - Usable as a shifting saw without horizontal saw blade - Profile stop shoulder swivellable 30° - 90° - 30° - Pneumatic material clamp - Coolant spray device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Condition: used, Year of construction: 1998, Hydropneumatic operation Profile height: 180 mm under hold-down Max. insertion height: 145 mm Abutment height: 150 mm Rjdpfx Asyrrddjmyocd Weight: approx. 400 kg

Condition: used, Year of construction: 1995, Hydropneumatic operation Profile height: 180 mm under hold-down Rodpfoyrrbvex Amyscd Max. insertion height: 145 mm Abutment height: 150 mm Weight: approx. 400 kg

Condition: used, Year of construction: 2011, Hydropneumatic operation Profile height: 200 mm below hold-down Rcjdpfx Amjynaluoysd Max. punching height: 150 mm Abutment height: 150 mm Weight: approx. 400 kg

Condition: good (used), Year of construction: 1980, machine/vehicle number: 2038, Offer 24272 Technical data: Rodpfx Ajt H Ibmsmyscd - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting range - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 800 x D 600 mm - Weight approx. 80 kg - Table base W 900 x H 750 x D 500 mm

Year of construction: 1996, condition: good (used), machine/vehicle number: 9182, Offer 23168 Technical data: - Notching possibilities + miters in 3 planes - right-angled, one-sided + two-sided + three-sided oblique . - Can be used as a shift cut crosscut saw Rjdsmb U E Aepfx Amyecd - Pneumatic profile clamping Machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3,5 x 40 mm positive - horizontal 500 x 3,5 x 40 mm negative - notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. positioning with digital display - Swiveling range saw blade horiz. with vert. saw blade Saw blade - 45° - 90° - 45° mot. positioning with digital displays - Notching height adjustment with digital displays - profile stop shoulder manually tiltable 30° - 90° - 45° - pneumatic coolant check device - air connection 6 bar - drive 400 V / 2 x 3 kW - space requirement approx. W 2400 x H 2000 / D 1400 mm - weight approx. 1200 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 250-19, Offer 25283 Technical Specifications: - Saw blade speed, frequency controlled, for very fine cutting Rcsdpsw Nhumofx Amyod - Saw blade diameter: 200 mm - Automatic operation cycle - Pressure stop with SICO counter for setting the glass pressing force - Simulation - Pneumatic connection: 6 bar - Drive: 400 V / 0.8 kW - Required space: approx. W 400 x H 1200 x D 700 mm - Weight: approx. 80 kg - Machine stand

Condition: good (used), Year of construction: 2009, machine/vehicle number: 9155, Offer 24245 Technical data: - Pneumatic feed of the milling unit - Work table height adjustable via handwheel - Horizontal and vertical material clamping - cutter diameter up to 300 mm - max. profile height 190 mm - max. milling depth 110 mm - max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw Rsdpfx Ajtq Taksmyjcd - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross stop - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 252-19, Offer 25269 Technical specifications: - Saw blade speed, frequency-controlled for ultra-fine cutting - Saw blade diameter: 200 mm - Automatic work cycle - Pressure stop with SICO counter for setting glass contact pressure – simulation - Pneumatic connection: 6 bar - Drive: 400 V / 0.8 kW - Required space: approx. W 400 x H 1200 x D 700 mm - Weight: approx. 80 kg Rcedpfsw R S Nwex Amysd - Machine stand

Condition: used, Year of construction: 2008, Behringer Eisele HCS 150, year of manufacture 2008, feed magazine, cut-off disposal. The machine is operational and can be purchased in its current condition or fully reconditioned by us including assembly. Rodpexpd D Njfx Amyjcd Type: HCS 150 Machine number: Type no.: 49600H0024 Year of manufacture: 2008 Weight: 4,500 kg Required space: 9.3 m x 7.5 m Control: Siemens PLC control Round material (max.): Ø 150 mm Flat material (max.): □ 135 mm Saw blade feed: 0.5 - 40 mm/min Compartments incl. roller conveyor: 11 units Single compartment load: max. 500 kg at 3 m bar length Total load capacity: 4,000 kg Conveyor manufacturer: Geppert Conveyor length: 1,500 mm Conveyor width: 400 mm Conveyor speed: 6.3 m/min Total power requirement: approx. 34 kW Voltage: 400 V Air connection: 6 Bar

Year of construction: 1997, condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. latch height: 185 mm Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Rjdpjx Ecg Usfx Amyocd Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Year of construction: 1999, condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. latch height: 185 mm Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Rjdpfevmz R Sex Amyscd coolant lubrication

Condition: as good as new (ex-display), Year of construction: 2018, saw blade diameter: 550,500 mm, Machine in perfect technical condition. Practically very little used. For processing aluminum and PVC profiles. Mitres possible in 3 levels and can be used as a splitting saw, manual adjustment of the horizontal saw blade by a maximum of 20 mm in front of the vertical saw blade. Notch options: rectangular, one-sided diagonal, two-sided diagonal, three-sided diagonal. Processing of profiles up to 300, width up to 90 °, bevels up to 30 °. Notch depth horizontally up to 185 mm, vertically up to 210 mm at an angle of 90 °. Notch width at 90 °: 300 mm, profile height 280 mm Manual adjustment of the notch and height, positioning using mechanical digital displays. Vertical saw blade rotation range 30° – 90° – 30°, (front/middle/back) manual, positioning via digital display. Vertical saw blade rotation range 30° – 90° – 30°, manual, positioning via digital display. Rcedpfx Aovtarnomyjd The material stop (table top) can be manually rotated left and right within the range of 30° - 90° - 30°, positioning via measuring scale. The material depth stop can be manually adjusted via the sliding carriage and manual clamp, positioning via digital display.

Condition: new, For processing all common aluminum window profile systems such as Schüco, Hueck, Heroal, Reynolds, etc. Universally applicable due to the double-adjustable punching tools. For corner angles with a groove dimension of 25 - 60 mm and profile chamber offset of 0 – 40 mm. Infinitely adjustable buttons, punching blades, and stop inserts in height. Buttons and punching tools are marked with scales. Retractable stop for easy insertion of the profiles, with automatic adjustment when moving towards the profile. Redpohmfyhofx Amyjcd Hydraulic stop locking mechanism. Pneumatic pressing process via a lever system, ensuring a synchronous punching process. 2 pneumatic clamping cylinders for tensioning the profiles. 2 eccentric disks for positioning the frames. 2 pivoting profile support arms. Operation via 2 foot valves. Includes standard tools.

Condition: used, Year of construction: 1993, Force: 100 tons Max. distance between columns: 1400mm Stroke: 250 mm Windows: 400mm Daylight: 400mm Table: 1250x1100mm Ram: 1250x1100mm Speed fast down: 400mm/sec. fast uo: 330mm/sec. work: 24-43 mm/sec. Rsdpfxoc Uwx Dj Amyscd Power: 33kW Weight: 10.000 kilos Height: 3300mm Width: 1700mm Depth: 1800mm 2-Hand operation Cutting dampers

Year of construction: 2023, condition: ready for operation (used), An aluminium mitre saw Eisele including a mobile extraction unit AS Sägetechnik is available. 1) Mitre saw Pressta Eisele GS 600, year of manufacture: 2023, saw blade diameter: 600mm, detent positions: 22.5°/45°/90°, mitre adjustment: 20°/-90°/-20°, material stop adjustment: 200mm, working height: 970mm, extraction nozzle diameter: 100mm, weight: approx. 650kg. 2) Mobile extraction unit AS Sägetechnik 460VT-2, suction nozzle diameter: 100mm, air flow rate: 1400m³/h, machine dimensions X/Y/Z: approx. 750mm/800mm/1800mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Rcedpfx Amow D Et Rjyed

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Semi-automatic circular saw for aluminium and non-ferrous metals with PD200-E-7 length measuring system Completely overhauled and fully functional Features: - Large cutting range with saw blade Ø 700 mm - Maximum profile width up to 530 mm, profile height up to 270 mm - Saw blade feed hydro-pneumatically adjustable from the outside - Radial feed movement from bottom to top - Saw motor drive power 7.5 kW - Infinitely variable blade speed adjustment - Metered spray unit - 2 vertical and horizontal clamping devices, each with pressure reduction - Infinitely adjustable feed rate of the saw unit - Manually operated safety guard Technical data: - Drive: 7.5 kW - Speed: 1300 - 2000 rpm - Cutting speed: 48 - 73 m/sec - Air pressure: 6 - 8 bar - Working height: 970 mm - Weight: 1250 kg - Dimensions: H 1900 x W 1400 x D 1700 mm - Height with guard open: 2450 mm PD200-E-7 length measuring system - Usable as a stop as well as a pusher Rcsdpfxex Eb Ans Amyed - Measuring length: 6 m - Positioning control for automatic positioning - Easy-to-read LED display for target length, actual length, and quantity - Positioning accuracy 0.1 mm/m - Piece counter for number of completed pieces / cuts

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm Rsdpoxvbvvjfx Amyjcd - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher