Used Diosna 200 2G Hubkneter for sale (17,124)

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit Ljdpjy Hkd Hjfx Ab Aeru For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine Lsdpfx Ajy Au Eyeb Ajru -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: including documentation, see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Condition: excellent (used), I am offering for sale an original DELO DELO-UNIPRO controller, designed for industrial adhesive dispensing and curing systems. The device is fully functional – it powers on correctly, the display works, and the menu is clear and fully operational (as shown in the pictures). The visual condition is very good, with only minor signs of normal use. Technical specifications: • Manufacturer: DELO Lrodpfxjz Snrhs Ab Aou • Model: DELO-UNIPRO • Part number: 95 200 01 • Serial number: 1501 UNI 648 • Power supply: 100–240 V AC • Frequency: 50–60 Hz • Power consumption: 40 W • Interfaces: RS232, CAN, USB, Ethernet, Input/Output, Foot Switch, and 4 channels (CH1–CH4) Included in the set: • DELO DELO-UNIPRO controller The item being sold is exactly as shown in the pictures.

Condition: new, For sale is an electric motor from the renowned company ATB Motorentechnik GmbH, manufactured in Germany. Model CD160M-4, explosion-proof design ATEX II 2G, suitable for operation with a frequency inverter. Technical data: • Power: 11 kW • Type: CD160M-4 • Voltage: 400 V Δ / 690 V Y • Current: 21 A / 12.1 A • Frequency: 50 Hz • Speed: 1460 min⁻¹ (4-pole) • Cos φ: 0.85 • Insulation class: F • Protection class: IP55 • Weight: 168 kg • Year of manufacture: 2007 • ATEX: II 2G EEx de IIC T4 – motor for areas with a risk of gas explosion • Shaft: diameter 42 mm, multi-spline Ledpfx Aez Slftjb Aeru

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, operating hours: 11,587 h, load capacity: 20,000 kg, lifting height: 3,500 mm, load center: 1,250 mm, fuel type: diesel, mast type: duplex, construction height: 3,750 mm, motor manufacturer: VOLVO, gearing type: automatic, fork carriage width: 1,750 mm, fork length: 2,000 mm, fork width: 250 mm, fork thickness: 100 mm, tire condition: 90 %, front tire type: pneumatic tires (air-filled), front tire size: 14.00-24, rear tire type: pneumatic tires (air-filled), rear tire size: 14.00-24, overall weight: 48,400 kg, empty load weight: 28,400 kg, total height: 3,850 mm, total length: 7,200 mm, total width: 3,100 mm, color: yellow, Equipment: CE marking, cabin, centralized greasing system, lighting, pallet forks, sideshift, # 🚜 BAUMANN GCS200/20/35 | DIESEL | 💪 20 TONS | DUPLEX 3500 MM | ⚙️ FORK POSITIONER | 🏠 FULL HEATED CAB | ✅ READY FOR WORK 🔧 FULLY SERVICED | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY If you are looking for a reliable heavy-duty sideloading forklift that generates value from day one instead of creating unexpected maintenance costs, this is the right machine for you. We are offering a fully inspected and work-ready BAUMANN GCS200/20/35 heavy-duty sideloading forklift. The truck has undergone a comprehensive technical inspection, extensive operational testing, and is ready for immediate operation in steel service centers, ports, timber yards, concrete plants, and heavy industrial facilities. ## ⭐ KEY ADVANTAGES Lsdpfx Abs Aa Iv Ie Aoru ✅ Fully serviced before delivery 🛡️ Start-up warranty 💪 Heavy-duty 20,000 kg lifting capacity ⚙️ Hydraulic fork positioner 🏠 Full heated operator cab 📹 Camera system 🔩 Reliable Volvo diesel engine 🛞 80% pneumatic tires 🚀 Ready for immediate work 🎥 Live online demonstration available 🚛 Worldwide delivery ## 📋 TECHNICAL SPECIFICATIONS 🏭 Manufacturer: BAUMANN 🚜 Model: GCS200/20/35 📅 Year: 2009 🏋️ Capacity: 20,000 kg ⚖️ Machine Weight: 28,400 kg ⛽ Power: Diesel 🔩 Engine: Volvo ⏱️ Hours: 11,587 h ⬆️ Mast: Duplex 📏 Lift Height: 3,500 mm ⚙️ Fork Positioner: 1,750 mm 📐 Fork Size: 2000 × 250 × 100 mm ↔️ Side Shift: No 🏠 Cab: Full cab with heating ## 📐 DIMENSIONS 📏 Overall Height: 3,850 mm 📏 Collapsed Mast Height: 3,750 mm 📏 Overall Length: 7,200 mm 📏 Overall Width: 3,100 mm 📏 Platform Length: 2,000 mm ## 🛞 TIRES Front: 14.00-24 Pneumatic Rear: 14.00-24 Pneumatic Condition: Approximately 80% ## ⚙️ EQUIPMENT ⚙️ Hydraulic fork positioner 🏠 Full heated cab 🔥 Cab heating 📹 Camera system 💡 Working lights 🔩 Volvo diesel engine ## 🏗️ IDEAL FOR 🏭 Steel mills and steel service centers 🔩 Steel, beams, pipes, and long materials 🪵 Timber industry 🏗️ Heavy manufacturing 🚢 Ports and terminals 🚛 Indoor and outdoor logistics ## 🤝 WHY CHOOSE FT LOGISTICS Every machine undergoes complete servicing, technical inspection, and operational testing before delivery. We stock over 100 forklifts and deliver throughout Europe, South America, Africa, Asia, and the Middle East. ## 🌍 WE PROVIDE 🔧 Full pre-delivery service 🛡️ Warranty 👨‍🔧 Technical support 💳 Leasing and financing 🚛 Worldwide transport 📄 Export documentation 🤝 After-sales support 🎥 Live online demonstrations, additional photos, and videos are available on request. # FT LOGISTICS ### 🚜 We Deliver Machines Ready To Work.

Year of construction: 2013, condition: excellent (used), - ATEX: II G / 2G c IIA – T2 - Year of manufacture: 2013 - Motor: 2.5 kW / 400 V, 50 Hz, 2875 rpm - High-pressure fan: 5,077 Pa / 3,300 Pa - Volume flow rate (m³/h): 103 Ljdj Abbnaepfx Ab Aoru - Very few operating hours - In perfect condition

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, FTNON-JBT MOP-200 onion peeling machine + SRI-200 sorting table For sale: an FTNON-JBT MOP-200 industrial onion peeling machine, complete with the accompanying FTNON-JBT SRI-200 sorting table. The equipment is suitable for industrial onion processing and can be used for inspecting and sorting the product after the peeling process. The two machines can be operated as part of a technological line. Machine details: Manufacturer: FTNON-JBT Type: MOP-200 onion peeling machine Type: SRI-200 sorting table Lrjdpszw A R Rofx Ab Aju Type: with onion feeding hopper Application: industrial onion peeling and sorting Stainless steel, food-grade design Suitable for industrial use Sold together with the sorting table connected to the onion peeling machine. The machines are in used condition. Viewing is possible by prior arrangement. The equipment is primarily recommended for food processing plants that want to expand their onion processing capacity or supplement their existing technological line. Additional technical data, photos, and information are available upon request.

Condition: used, USED Ursvikens 4.1m x 200 Ton, Cybelec ModEva 12S Control, Year 1999, Complete with Tooling Ursviken Optima 200 CNC Press Brake - 200 Ton x 4100mm Quality Swedish-built Ursviken Optima 200 CNC hydraulic press brake with 200 tonne bending capacity and 4100mm bending length. Designed for demanding fabrication environments, Ursviken press brakes are renowned worldwide for their robust construction, precision bending performance and long service life. Suitable for a wide range of sheet metal and fabrication applications, including structural steelwork, architectural metalwork, agricultural equipment, machinery manufacture and general engineering. The machine combines substantial pressing force with a generous working length, making it ideal for both heavy-duty and high-accuracy bending operations. Ursviken's reputation for reliability and engineering excellence has made the Optima series a popular choice amongst fabrication companies seeking dependable, high-capacity bending equipment. Lrjdpe Act Egjfx Ab Asu Available for inspection under power at Bowland Trading Ltd. Key Features 200 Tonne Capacity 4100mm Bending Length CNC Control Hydraulic Operation Heavy-Duty Fabrication Capability Swedish Manufactured Machine Suitable for Sheet Metal & Structural Fabrication

Condition: used, Weiss   Type: SWT 200/400-S   Weiss spray and splash water test cabinet   This cabinet is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Lodpfezii Aksx Ab Aeru Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum.   Features Glass door with wiper Pneumatic drive for the swivel nozzle Adjustable swivel angle Replaceable swivel nozzles Nozzle holder is swiveling and replaceable Adjustable water flow rate and measurement   Control of the test duration   Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen holder (total) 25 kg Spray radius 200 mm / 400 mm   Data for IP protection tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10°   Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm   Data for operation Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A   Weight: 375 kg   Important note: "The table shown in the photos is not included in the sale."   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2011, operating hours: 361 h, functionality: fully functional, machine/vehicle number: 7428122100001.105, pressure: 6 bar, power: 16,500 kW (22,433.73 HP), temperature: 120 °C, operating temperature: 120 °C, total height: 4,300 mm, total length: 8,700 mm, nominal heat output: 165 kW (224.34 HP), total width: 3,700 mm, tank capacity: 33,500 l, empty load weight: 35,000 kg, We offer this Viessmann VITOMAX 200 hot water boiler in very good condition, manufactured in 2011. It is currently stored and preserved with nitrogen. Manufacturer: Viessmann Model: VITOMAX 200 Lrodpfxjzlc Eds Ab Asu Year of manufacture: 2011 Type: hot water boiler Operating hours: 361 If you have any further questions or require additional information, please do not hesitate to send us a message or call us. Ioan Munteanu

Condition: used, Weiss Type: SWT 200/400 Weiss Spray and Splash Water Test Chamber The chamber is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum. Features Glass door with wiper Pneumatic drive for the pivoting nozzle Adjustable pivoting angle Replaceable pivoting nozzles Nozzle holder is pivotable and replaceable Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests Pivoting speed approx. 60°/s Pivoting angle IPX3 approx. ± 60° Pivoting angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm Ljdpfx Abszh D Rms Ajru External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A Weight: 375 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, functionality: fully functional, machine/vehicle number: WDD2052071F574970, mileage: 234,569 km, first registration: 04/2017, overall weight: 2,190 kg, empty load weight: 1,615 kg, total length: 4,771 mm, color: grey, axle configuration: 4x2, gearing type: automatic, fuel type: diesel, emission class: euro6, Year of construction: 2017, Mercedes-Benz C 200 d BlueTEC Estate Year of manufacture: 2017 First registration: 04/28/2017 Next mandatory inspection due: July 2027 Paintwork: Selenite Grey - Metallic paint Net price: 8,200 EUR Gross price: 9,758 EUR Equipment: 001A Fabric - black / anthracite Ledpfx Ae Adrdwsb Aoru 1A6 Torque converter 4-cylinder diesel 218 Rear view camera 235 Active parking assist 249 Automatically dimming interior and exterior mirrors 258 Collision warning with active brake intervention FCW-Stop 270 GPS antenna 287 Through-loading system 345 Rain sensor 351 Ecall emergency call system 355 Pre-installation for navigation system upgrade 357 SD card navigation 421 Automatic transmission 9-speed 440 Cruise control 448 Touchpad with rotary push button 474 Diesel particulate filter 475 Tire pressure monitoring system (TPMS) 485 Comfort suspension 500 Electrically folding exterior mirrors 522 Radio Audio 20 navigation capable NTG5 550 Trailer coupling 580 Air conditioning 58U Roof liner fabric grey 5A1 Electro-hydraulic control unit - torque converter 611 Ambient lighting 632 LED headlights, static, for right-hand traffic 725 Roof rails in chrome finish 818 Siren for anti-theft alarm system (EDW) 840 Dark tinted glass 873 Seat heating for driver and front passenger 875 Heated windshield washer system 8U8 I-Size marking (successor to Isofix) 916 Fuel tank with large capacity - volume 1 927 Exhaust emission control Euro 6 technology 992U Selenite Grey - Metallic paint A104 Gear meshing optimized for noise reduction B03 Direct Start / ECO Start-Stop function F205 Model series 205 FS Station wagon GA7 Automatic transmission H80 Decorative elements - plastic K11 Adaptive brake light flashing L Left-hand drive M020 BlueTEC M22 Engine displacement 2.2 liters M651 R4 diesel engine M651 P15 Equipment line / package – AVANTGARDE – Exterior P44 Parking package P49 Mirror package P65 Ergonomics package P75 Equipment line / package – Basic – Interior R01 Summer tires R48 Light alloy wheels 5-double-spoke design 17" "Rundum" U01 Rear seat belt status indicator U10 Front passenger seat with weight recognition U22 Lumbar support adjustment, front U60 Pedestrian protection - Active bonnet U77 Diesel - Exhaust emission control BlueTEC SCR Generation 2 U85 Large SCR tank Offer subject to change. Errors, changes, and prior sale reserved. All information without guarantee. Our General Terms and Conditions apply. Location: Peter Meineke Becklinger Str. 17 29683 Bad Fallingbostel-Dorfmark Inspections and/or test drives only by prior appointment. Please coordinate by phone before your arrival, as the vehicle/device may not be at the specified location. Contact: Ewgeni Schneider Mobile: +49 (0) 173 / 9903073

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Lrodpexvivqsfx Ab Asu Offered at a special price, but must be dismantled by the buyer Technical data: see photos Location: ex-site Saarland

Condition: new, Year of construction: 2026, Crosscut and Mitre Circular Saws Type ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precise ball bushing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard connectable to extraction system Lredpfsw Hl Aqex Ab Aeu Machine mounted on mobile machine base with 1.5 m long roller conveyors on both sides (left and right) Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: In stock at 54634 Bitburg - Immediately available - On request, we are happy to offer the saw blade as well.

Condition: like new (used), Year of construction: 2025, Holzkraft Edge Sanding Machine Model: KSO 200 F with veneer sanding equipment Sanding unit tiltable up to 45° via lever The machine frame is made of welded steel, ensuring high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be activated as needed Sanding shoe with graphite coating for extended belt life Height-adjustable sanding table to utilize the entire sanding belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tension automatically compensates for belt length variations Double extraction system Extendable roller table extension With rubber-coated sanding drum Veneer edge sanding device with fine-adjustable contact shoe, pressure rollers, and stop rulers Infeed ruler with groove for overlapping veneer Quick changeover from veneer edge to solid wood sanding possible Dimensions and Weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Suction nozzle diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Working Tables Working table length 960 mm Working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Longitudinal table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Lredsy Iu N Aepfx Ab Asu Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Connection voltage 400 V Sanding Unit Abrasive belt length 3000 mm Abrasive belt width 200 mm Belt speed(s) 20 m/s Sanding surface length 1050 mm Sanding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg — Immediately available —

Condition: good (used), Forced mixer Lredpfx Asx N Evvjb Aeu

Condition: used, Year of construction: 2024, total length: 8,430 mm, · Plattformhöhe 18.35 m · Überhang / Knickpunkt Gelenk 8 m · Korbarm-Drehwinkel (oben / Boden) +69 ° / -66 ° · Drehung des Oberwagens 355 ° · Drehung des Arbeitskorbs (rechts / links) 90 ° / 90 ° · Anzahl Personen (innen / außen) 2 / 2 · Bodenfreiheit Mitte Radstand 0.44 m · Radstand 2.40 m · Fahrgeschwindigkeit - Transportmodus 4.70 km/h · Fahrgeschwindigkeit - Arbeitsmodus 0.80 km/h · Steigfähigkeit 40 % · Zulässige Neigung im Arbeitsmodus 5 ° · Antriebsräder (vorne / hinten) 2 / 2 · Lenkräder (vorne / hinten) 2 / 2 · Gebremste Räder / Räder 0 / 2 · 230-V-Anschluss · 4 Allradlenkung mit hundeganglenkung · 4 gleichzeitige Bewegungen · Alarmton und Kontrollleuchte (Neigung, Überlast, Gefälle) · CAN-Bus-Technologie · Differentialsperre an der Hinterachse · Elektrische Notpumpe · Engine with DPF · Korb verzinkt 2.100 mm · Pendelvorderachse · Proportional-Regelung · Stop & Go · Stufenweise Drehzahlregelung · Totmannpedal · Vorderachse mit Schlupfbegrenzung · großes Farbdisplay an der Bodensteuerung · Innerer Wenderadius 1.26 m · äußerer Wenderadius 3.90 m · Motornorm Stage V · Nennleistung Verbrennungsmotor / Leistung (kW) 34 Hp / 25.50 kW · Bodendruck 20.65 dan/cm2 · Hydraulikdruck 340 bar Lrjdpoxd Hikjfx Ab Aeu · Fassungsvermögen des Hydrauliktanks 80 l · Fassungsvermögen des Kraftstofftanks 78.50 l · Umweltschädliches NOX 2.61 kg

Year of construction: 2007, condition: ready for operation (used), - USED - 8-AXIS CNC LATHE WITH MILLING HEAD, DOWN TURRET HEAD AND COUNTER SPINDLE MAX ROTATING DIAMETER: 660 mm MAX TURNING LENGTH: 1495 mm MAX TURNING DIAMETER: 660 mm BAR CAPACITY: 65 - 65 mm SPINDLE: 35-5000 rpm; 22 kW; 254 mm COUNTER SPINDLE: 35-5000 rpm; 18,5 kW; 254 mm HEAD: CAPTO C6 ; -30°+195° ; 15-12000 rpm; 18,5 kW Lrsdpoz Sfuhefx Ab Asu X-AXIS TRAVEL: 580 mm X2-AXIS TRAVEL: 150 mm Y-AXIS TRAVEL: 160 mm Z-AXIS TRAVEL: 1545 mm Z2-AXIS TRAVEL: 1490 mm B-AXIS TRAVEL: 1550 mm RAPID FEEDS X-Y-Z: 38 - 26 - 38 m/min TURRET HEAD: 9 POS TOOL MAGAZINE: CHAIN-TYPE ; 80 POS HIGH PRESSURE COOLANT: 18 Bar CONTROL UNIT: MAZATROL MATRIX WEIGHT: 11800 Kg OVERALL DIMENSIONS: 5090 x 3270 x 2830 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; TOOL SETTER

Condition: used, Year of construction: 2005, Used 3.6-meter CNC press brake by Ermaksan Type: AP 3600 x 200 Capacity: 3600 x 200 tons Elgo NC control system 1 set of tooling Lredpfxozh Icyo Ab Asu Year of manufacture: 2005

Condition: excellent (used), functionality: fully functional, LOESER AA 200 – Cross-cutting and chamfering machine for dowels Diameter range: 6–18 mm Ø Ledpfxoz R Tm Ne Ab Asru Minimum dowel/rod length: 15 mm Output: approx. 2000 dowels/hour Motor power: 0.55 kW Cutting tool/blade speed: 7150 rpm

Condition: used, CTS Temperature testing chamber / Stress screening chamber CTS TS-70/200-5/S temperature testing chamber Temperature testing chamber, -70 °C to +180 °C, approx. 200 liters For sale is a used temperature testing chamber from the manufacturer CTS Clima Temperatur Systeme GmbH. The testing chamber is suitable for temperature testing, stress screening, environmental simulation, material testing, quality assurance, as well as development and endurance tests. Technical data Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TS-70/200-5/S Device type: Temperature testing chamber / Stress screening chamber Test chamber volume: approx. 200 liters Test chamber dimensions: approx. 650 x 400 x 750 mm (W x D x H) Lodozf Hi Hspfx Ab Asru Housing dimensions: approx. 920 x 1345 x 1800 mm (W x D x H) Weight: approx. 550 kg Temperature range: -70 °C to +180 °C Temperature change rate, heating: approx. 8 K/min Temperature change rate, cooling: approx. 6 K/min Max. heat radiation at +20 °C: approx. 3500 W Actual test run according to protocol: Heating: approx. 10 K/min Cooling: approx. 6.25 K/min Temperature test from -70 °C to +180 °C documented Power connection: 400 V 3/N / 50 Hz Power: 10.9 kW Rated current: 15.7 A Protection class: IP22 Refrigerant pre-cooling stage: R404A Refrigerant quantity pre-cooling stage: 2.5 kg Refrigerant cooling stage: R23 Refrigerant quantity cooling stage: 0.6 kg / 15 bar Operating pressure PS: 25 bar Test pressure PT: 20 bar Operating hours according to protocol: approx. 25,977 h Equipment Touch panel operation Viewing window in the door Interior made of stainless steel Test chamber lighting Side access ports as shown in the pictures Insert grid / Test chamber equipment as shown in the pictures Over-temperature test item protection Eurotherm safety controller RS232 interface Documentation / documents as shown in the pictures Accessories as shown in the pictures Application areas Temperature testing Stress screening Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of delivery 1x CTS TS-70/200-5/S temperature testing chamber Insert grid / Test chamber equipment Existing documentation / documents Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Objects, machines or other accessories shown in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight forwarding possible. Changes, errors and prior sale reserved. We would be happy to answer any further questions by telephone.

Condition: used, Weiss   Weiss UV200SB Weathering Chamber / UV Aging Test Device Lrsdpfxjziiz Ho Ab Aou Air-cooled, approx. 200 liters   For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating the effects of sunlight and weather. The device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3).   Technical details   UV spectrum: approx. 290–450 nm (UVA/UVB) Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases   Humidity range: approx. 10 % … 95 % RH (relative humidity) at temperatures above approx. +10 °C Temperature change rate: approx. 3 K/min   Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm   Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A   Refrigerant: R 404A   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data and specifications are reserved!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification: heating jacket VT 6025 Temperature (metric): 200 °C Internal dimensions (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements: 230 V, 50/60 Hz Frequency: 50/60 Hz Capacity (metric): 25 l Heating jacket type: without inert gas connection Voltage: 230 V, 1.3 kW, 5.9 A Weight: 58 kg Lrodpozgbq Ijfx Ab Aou Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Vötsch Ledpfx Abozg Tpvo Asru Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances: 40% of the lower explosion limit (LEL) Maximum temperature of the heating surface: over 750 °C Device description: Technical data: Internal volume (usable volume): 0.216 m3 Internal dimensions: width 600 mm, height 600 mm, depth 600 mm External dimensions: overall width 796 mm, height 1725 mm, depth 850 mm Load capacity: Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air flow rate: 96 m3/h Purge time (5 air changes): 90 seconds Increased recirculating air flow rate: 33 m3/h Total steam volume: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-out temperature: Temperature limiter (TL) fixed setting: 300 °C Adjustable temperature selector (TS) adjustable above the nominal temperature: 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TL): 1 Adjustable temperature selector (TS): 2 Nominal temperature: 200 °C Electrical data: Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Rated power: 6.0 kW Connected load: 7.0 kW Weight: 275 kg Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, CTS Type: TSS-70/350-A Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The device is used for performing temperature shock tests Lrsdpfx Aboy Hkgbs Asu and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component testing Temperature shock and cycle temperature tests Technical data: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Equipment / Features: CTS control panel with touch display Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display 2-zone system (hot and cold chamber) Automatic carriage for shock tests Technical design: Hot and cold chamber separated Carriage system for rapid temperature change Test chamber made of stainless steel Insert shelf / grating Viewing window in the door Water cooling connections available Control cabinet integrated Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Other data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: see pictures (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.