Used Device For Regeneration Dpf Gpf Cat for sale (16,122)

Condition: excellent (used), Available: immediately Gjdpfxswv Ttps Akyekc

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: Gkodpfx Aoyhcabskyec The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: used, mileage: 158,088 km, power: 180 kW (244.73 HP), first registration: 06/1996, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: mechanical, emission class: euro2, loading space width: 2,490 mm, loading space length: 4,520 mm, loading space height: 800 mm, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, all wheel drive, crane, soot filter, Equipment: * All-wheel drive with differential locks, * Werner winch, * reinforced rear suspension, * trailer hitch, * ABS, * sunroof, * sun visor, * driver's suspension seat, * 6-speed manual transmission, * diesel particulate filter, * pre-installation for auxiliary heater. Body/Crane: * Flatbed with aluminum side boards, * loading area dimensions: 4,520 mm x 2,490 mm x 800 mm, * front wall extension, * Palfinger crane 14,500 B, * wireless remote control, * 2-point outrigger system, * emergency stop, * 5+6 control circuits. Load capacity/outreach: * Max: 4,390 kg Hydraulic outreach: * 3,220 kg = 4.10 m * 2,080 kg = 6.10 m * 1,510 kg = 8.20 m * Mechanical outreach: * 920 kg = 12.5 m * 720 kg = 14.7 m * 530 kg = 16.7 m Other: * First delivery in Germany, * 2 previous owners ("Energy Supply" company), * payload 6,840 kg according to registration certificate, * crane not functioning ("malfunction in the outriggers"). Since 1972, we have been your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, near the Bremer Kreuz. Behnke Commercial Vehicle Center always has approximately 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special conditions. If you are interested, we will gladly prepare an individual offer for you! Godpfxex Dph As Akyekc We welcome trade-ins of your commercial vehicle/construction machinery. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may need to be verified separately. Errors and prior sale are reserved.

Condition: used, Cryogenic gas tank vessel used for Ethylene (ethene, C2H4). Gkodpfjx Hykcjx Akyoc Export from EU We have also other tanks for different gases please contact us for more details

Condition: used, centre height / mm weight 160 kg chucking diameter 250 mm Gkodpfx Ajymga Njkyjc swiveling dividing head with three-jaw chuck from Forkardt F250 Chuck diameter: 250 mm Total weight: 160 kg

Condition: excellent (used), Year of construction: 2013, MAN gas tank ADR truck used for carbon dioxide CO2 Truck BDF/ADR MAN year 2013 606.000 km Gedpfsyanhzex Akyjkc Tara 8705 kg Tank for CO2 Pump Flow-meter Only for export from EU We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane. We will be glad to answer your questions via Phone and E-mail.

Condition: used, / Gkedpfx Akjykvbdeysc weight 295 kg Center height: approx. 180mm dimension Length: about 480mm Width: about 450mm Height: 280mm Weight: 110kg

Condition: used, functionality: fully functional, LENZKES Clamping System Package Upper components: 6 pieces, width = 60 mm, groove = 18 mm, length = 125 mm, height = 130 mm 6 pieces, width = 60 mm, groove = 18 mm, length = 125 mm, height = 70 mm 4 pieces, width = 90 mm, groove = 28 mm, length = 180 mm, height = 110 mm 4 pieces, width = 90 mm, groove = 28 mm, length = 180 mm, height = 200 mm Gkodpfxozyk Sus Akysc Lower components: 3 pieces, width = 60 mm, length = 150 mm, height = 250 mm 3 pieces, width = 60 mm, length = 150 mm, height = 160 mm Adjustable force clamps: 5 pieces, width = 60 mm, length = 130 mm, height = 42 mm 3 pieces, width = 60 mm, length = 110 mm, height = 42 mm 12 pieces, width = 60 mm, length = 90 mm, height = 42 mm 6 pieces, width = 52 mm, length = 127 mm, height = 35 mm 3 pieces, width = 52 mm, length = 87 mm, height = 37 mm 14 pieces, width = 52 mm, length = 76 mm, height = 37 mm 2 pieces, width = 75 mm, length = 48 mm, height = 160 mm 4 pieces, width = 75 mm, length = 48 mm, height = 110 mm Free addition: Various clamping jaws (7 pieces complete + 5 pieces accessories) AMF clamping jaws (comparable with Lenzkes) AMF No. 6321/17 4 pieces, width = 50 mm, length = 140 mm, height = 50 mm incl. clamping screws M12

Condition: excellent (used), EA Elektro-Automatik 120 kW High-Voltage Rack System Manufacturer: EA Elektro-Automatik GmbH & Co. KG Rack: EA Rack 24 RU for 4x PSB/ELR 10000 4U Series Article No. Rack: 09114762 Power Modules: 4x PSB 11000-80 For sale is a complete bidirectional, high-performance rack system with four EA PSB 11000-80 units. The PSB units combine a programmable DC power supply and an electronic load with grid feedback into a single device. The system is particularly suitable for high-voltage test benches, battery and energy storage testing, e-mobility, automotive, power electronics, as well as research and development. Technical Data: 4x EA PSB 11000-80 Voltage range per module: 0–1000 V DC Current range per module: 0–80 A Power per module: 30 kW Installed rack total power: max. 120 kW Resistance range per module: 0.4–650 Ohm Output capacitance per module: 200 µF Efficiency source/sink: up to approx. 95.8 % Rack connection data according to nameplate: Rated voltage: 3x 400 V AC L1/L2/L3/PE Rated current: 3x 192 A Frequency: 45–65 Hz Operating mode: Continuous P-max: 120 kW Country of manufacture: Germany Equipment: 4x EA PSB 11000-80 EA 24 RU industrial rack Bidirectional source/sink operation Grid feedback Master-Slave/Share-Bus connection Common DC high-current copper busbars Color touch displays USB and Ethernet interfaces Bender LINETRAXX VMD460 Separate protection of the power modules Main switch Emergency stop Touch protection for the DC busbars Integrated power and protective conductor distribution The four power modules are interconnected within the rack. The common DC power distribution is provided via touch-protected copper busbars. Dimensions / Transport data: Dimensions L x W x H: approx. 1,050 x 610 x 1,400 mm Weight: approx. 400 kg Footprint: approx. 1,050 x 610 mm Pallet spaces: 1 Shipping: Freight forwarder The dimensions and weight are preliminary transport values based on a comparable rack. Condition: Used Optical condition according to the images. The devices can be switched on, and the displays are active. A complete power and feedback test is not documented. Scope of delivery: 1x EA Elektro-Automatik 24 RU Rack 4x EA PSB 11000-80 Bender LINETRAXX VMD460 Integrated power, protection and monitoring technology Cabling and equipment according to the images Inspection possible by prior arrangement. Loading possible by arrangement. Availability: by arrangement. Subject to changes, errors and prior sale. Gkedozyltgopfx Akyoc

Condition: ready for operation (used), Hommel Etamic W20 Jenoptik Waveline Roughness Tester, Measuring Device (562) Measuring range: max. 20 mm Measuring span: ± 300 µm Accessories: Tripod Granite measuring plate PC You are welcome to visit us for an inspection. We will gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Gksdpjzyqzcsfx Akysc Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand ‘Summa 500-9462 1400W’ production system Item for sale: 1 x Summa 500-9462 1400W Compatible with: Summa F1432 Summa F1612 Summa F1832 Summa F3220 Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). Gkodpfezb Aktex Akyoc The device has been tested to ensure it is in working order. A test print can be seen in the photo Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: ready for operation (used), Year of construction: 2007, Stiefelmayer Brivisor KL-4 Hardness Testing Machine Testing height: 150 mm (with testing table) Outreach: 200 mm Device footprint: 560 mm x 250 mm x 770 mm (W x D x H) Load range: 0.05 - 10 kgf Weight: approx. 45 kg Year of manufacture: 2007 Gkodezzynhepfx Akyjc Vickers: HV 0.1 | 0.3 | 0.5 | 1 | 2 | 3 | 5 | 10 Brinell: HBW 1/5 and HBW 1/10 You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the article may occur and are subject to change.

Condition: used, Control: Siemens SIMATIC PANEL, connected load: 28kW, an on-site inspection is possible. Gksdpjzybv Defx Akyec

Year of construction: 2012, condition: good (used), Unit comes complete with suction lift Maximum load capacity: 150 kg Width: 650 mm Height: 2000 mm Gjdjzmyrdspfx Akyskc Depth: 1100 mm Weight: approx. 25 kg Condition: good, second-hand

Condition: new, power: 75 kW (101.97 HP), Year of construction: 2026, An impact crusher is a machine that uses striking as opposed to pressure to reduce the size of a material. Impact crushers are versatile and widely used in various industries for the crushing of hard, abrasive materials. They operate by applying force on the material to be crushed, breaking it into smaller pieces. Here is a general introduction to impact crushers: The impact crusher is a versatile machine used for various applications in construction, mining, and recycling industries. Below are some of the key applications of an impact crusher: 1. Primary and Secondary Crushing Impact crushers are commonly used in both primary and secondary crushing stages. In primary crushing, they break large rocks into smaller, more manageable sizes, and in secondary crushing, they refine the material further into smaller grades. 2. Production of Aggregates Impact crushers are widely used in the production of aggregates for construction. They are effective at producing a wide range of materials, including: Crushed stone for road construction. Sand for concrete and asphalt production. Gravel for general construction and drainage. 3. Recycling One of the most significant applications of impact crushers is in the recycling industry, especially for processing construction and demolition (C&D) waste, which includes materials like concrete, brick, and asphalt. The crushers help convert waste into usable products such as: Recycled concrete aggregates (RCA). Asphalt. Recycled sand and gravel. Gkedpfx Akeq I N Iqsyoc 4. Mining Industry Impact crushers are used in the mining industry to process ore materials. These crushers help break down large rocks and ores into smaller pieces, making them easier to process for extraction of valuable minerals like gold, copper, and other metals. 5. Production of Manufactured Sand In the production of manufactured sand for concrete, impact crushers are used to break down larger rocks into fine particles, which are then used as an alternative to natural sand. This is especially useful in areas where natural sand is scarce or environmentally protected. 6. Construction and Road Building Impact crushers are integral in the production of materials for road construction, such as base and sub-base materials. These materials are crucial for the stability and durability of roads, highways, and foundations. 7. Industrial Applications Impact crushers are also used in various other industrial applications, such as: Cement production: Crushing limestone and other materials for cement manufacturing. Glass recycling: Breaking glass waste into smaller pieces for recycling. 8. Demolition and Dismantling Impact crushers are used in demolition projects where buildings or structures need to be demolished and the materials crushed for reuse or disposal. They help reduce the size of debris like concrete, asphalt, and bricks into smaller, manageable pieces.

Condition: new, functionality: fully functional, power: 450 kW (611.83 HP), Year of construction: 2025, ### Crawler Mobile Crusher / Track-Mounted Mobile Stone Crusher: Introduction and Application Introduction: Crawler mobile crushers, also known as track-mounted mobile crushers, are versatile and highly efficient machines designed for crushing various materials on-site. Unlike traditional fixed crushers, these mobile units are mounted on tracks, allowing them to navigate rough terrains and remote locations with ease. These crushers integrate feeding, crushing, screening, and conveying processes into one system, providing flexibility and reducing the need for multiple pieces of equipment. Powered by diesel engines, they offer mobility, reduced setup time, and a compact design that simplifies transportation. Key Features: 1. Mobility: Track-mounted design ensures ease of movement across different sites. 2. Versatility: Suitable for crushing various types of materials, including rocks, ores, and demolition waste. Gkedjq Nfvuepfx Akysc 3. Efficiency: High-performance crushing and screening capabilities. 4. Eco-friendly: Equipped with dust suppression and noise reduction systems. 5. Automation: Advanced control systems for smooth operation and minimal manual intervention. Applications: 1. Quarrying and Mining: Ideal for crushing hard and abrasive stones such as granite, basalt, and limestone. They efficiently process raw materials for construction aggregates and mining operations. 2. Construction and Demolition: Perfect for on-site crushing of demolition waste, including concrete, bricks, and asphalt. This reduces the volume of waste and allows for recycling of materials, contributing to sustainable construction practices. 3. Infrastructure Projects: Widely used in road construction, railway ballast production, and infrastructure development. Their mobility ensures they can operate close to the construction site, reducing material transportation costs. 4. Recycling: Effective in recycling operations, particularly for crushing and processing concrete and asphalt debris. This contributes to reducing landfill use and conserving natural resources. 5. Aggregate Production: Essential for producing high-quality aggregates used in construction projects. Their capability to produce different sizes of aggregates meets various industry standards and requirements. Conclusion: Crawler mobile crushers are indispensable in modern construction and mining operations. Their mobility, efficiency, and versatility make them a valuable asset for industries requiring on-site crushing and screening. By reducing setup time and transportation costs, they enhance operational efficiency and contribute to eco-friendly practices through material recycling.

Condition: used, WIG welding machine, electric welding unit DALEX Type TGKW 55 (AC-DC) Serial No. 532521, Year of manufacture approx. 1975 Power: 225 Amps = 60% duty cycle 125 Amps = 100% duty cycle Setting range: 2.8 to 225 Amps Type of current: Direct current and alternating current (AC-DC) Mains connection: 380 Volts, 50 Hz Gedjdzqacspfx Akyokc - Power setting via 5 coarse stages and fine adjustment via rotary potentiometer, continuously adjustable - 2-cycle and 4-cycle welding system - Remote control with rotary potentiometer for fine adjustment - Digital display for amperage - WIG hose package, 4 meters - Welding gas pressure regulator - Water-cooled Space requirement L x W x H: 1050 x 610 x 890 mm Weight: 290 kg Good condition

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Weight with conveyor approx. 1250Kg Connection to 400A 32A Godpfx Aouprqwokyekc Used, functional condition

Condition: used, machine/vehicle number: 008411, Max. panel width: 1200 mm Gjdpfxsyngy Ee Akyjkc Max. panel length: 2700 mm Rotation system: double cone Rotation direction: from long to transverse

Condition: used, axle configuration: 3 axles, first registration: 03/2009, color: other, Year of construction: 2009, Empty weight: 9.210 kg Axle 1: left 14 mm right 14 mm Gjdpowhn S Djfx Akyjkc Axle 2: left 16 mm right 16 mm Axle 3: left 16 mm right 16 mm

Condition: new, cutting range for steel to 12.0 TS mm cutting range for steel to 8.0 QS mm capacity at 100% 30.0 Ampere cutting medium Druckluft output von 20 - 40 Ampere output Eingang 4.9 KW voltage 230 V weight 17.9 kg range L-W-H 480 x 210 x 340 mm The Avalon 40.1 is a lightweight, handy plasma cutting system with high cutting cutting performance and top cutting quality. Its low weight and easy handling handling make it the ideal candidate for trade, workshop and industry. industry. Cuts carbon steel, stainless steel, aluminum, copper ... Features - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch for activating the air flow to set the test air pressure . without having to trigger the burner. - Powerful compact unit Gjdew U U Tgopfx Akyokc - Intelligent protection function protects the plasma torch from damage * such as incorrect air pressure, missing wearing parts, overloading of the . pilot arc max. cut-off cut for carbon steel . 12.0 mm Optimum cutting thickness carbon steel .. 8.0 mm Stainless steel .. 8.0 mm Aluminum .. 4.0 mm Copper .. 3.0 mm Special equipment included : - 1x 3.0 m / earth cable - 1x 6.0 m / hand cutting torch "IPT-60 Coax" * Hand torch 70° * 6.0 m hose with rubber cover

Condition: new, cutting range for steel to 35.0 TS mm cutting range for steel to 25.0 QS mm ampere 20 - 65 Ampere cutting medium Druckluft voltage 400 V output Eingang 7.8 KW weight 51.5 kg range L-W-H 595 x 250 x 890 mm Avalon 65 AIR with integrated compressor Cutting - clean and reliable Gkodpfexaaicjx Akysc The Avalon 65 AIR air plasma cutting system with integrated compressor compressor is your reliable partner for demanding applications. use. With the Avalon 65 Air, you can make cuts up to a material thickness of material thickness of 35.0 mm. Features : - IGBT technology - with integrated compressor - Microprocessor control system for excellent and dynamic . Arc characteristics - CNC interface - HF-free arc starting system for increased reliability . and low EMF exposure - Manual switch for activating the air flow to set the test air pressure . without having to trigger the torch - Intelligent protection function protects the plasma torch . from damage such as incorrect air pressure missing wear parts , . overloading of the pilot arc. * max. cutting thickness carbon steel = 35.0 mm (separating cut) * Optimal cutting thickness carbon steel = 25.0 mm (quality cut) * Stainless steel = 25.0 mm * Aluminum = 20.0 mm * Copper = 14.0 mm Special equipment included : - 1x 3.0 m / ground cable - 1x 6.0 m / hand cutting torch "IPT-60 Coax" * Hand torch 70° * 6.0 m hose with rubber cover

Condition: new, cutting range for steel to 15.0 TS mm cutting range for steel to 10.0 QS mm capacity at 100% 25.0 Ampere cutting medium Druckluft output von 20 - 40 Ampere voltage 230 V Air consumption 230 l/min. output Eingang 4.9 KW weight 8.0 kg range L-W-H 505 x 147 x 305 mm The Avalon 40.1 is a lightweight, handy plasma cutting system with high cutting cutting performance and top cutting quality. Its low weight and easy handling handling make it the ideal candidate for trade, workshop and industry. industry. Cuts carbon steel, stainless steel, aluminum, copper ... Features - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch for activating the air flow to set the test air pressure . without having to trigger the burner. - Powerful compact unit - Intelligent protection function protects the plasma torch from damage * such as incorrect air pressure, missing wearing parts, overloading of the . pilot arc max. cut for carbon steel .. 15.0 mm Optimum cutting thickness carbon steel .. 10.0 mm Stainless steel .. 10.0 mm Aluminum .. 6.0 mm Copper .. 5.0 mm Special equipment included : Godpfxjxaavcs Akyokc - 1x 3.0 m / earth cable - 1x 6.0 m / hand cutting torch "IPT-60 Coax" * Hand torch 70° * 6.0 m hose with rubber cover

Condition: new, length 1500 x 740 x 780 innen mm weight of the machine ca. ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets Gkjdpfxjxab Ite Akyoc - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros

Condition: new, Year of construction: 2025, Screens for four-shaft shredders Models: RS, ZM, ZMK, GZ Type: SB-450, SB-760, SB-960, SB-1030, SB-1230 Year: 2025 New / Ready for Operation Gedoxn Namepfx Akyokc We are a manufacturer of replacement blades and spare parts for crushers and shredders. Please provide the manufacturer's name and machine type when inquiring.