Used Dahlih Mcv 1020 Ba for sale (5,130)

Condition: new, Year of construction: 2022, operating hours: 700 h, functionality: fully functional, travel distance X-axis: 200 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, controller manufacturer: SIEMENS, spindle speed (max.): 25,000 rpm, operating hours of spindle: 700 h, coolant supply: 80 bar, spindle nose: HSK40, number of spindles: 2, number of slots in tool magazine: 40, Equipment: chip conveyor, The BA W02-22 is a horizontal, twin-spindle machining center for 4-axis machining of small non-ferrous metal workpieces. Linear and torque motors in the feed axes guarantee maximum dynamics and very short non-productive times while maintaining high workpiece accuracy. SPECIAL MACHINE FEATURES — Monobloc steel/mineral-cast composite design — Linear motors in the X, Y, and Z axes; torque motors in the rotary axes — Gantry drive in the Y-axis with electronic coupling for high positional accuracy under eccentric load — Mass-optimized machining unit (“box-in-open”) — Work spindle available with HSK A40 (25,000 rpm) — Double swivel carrier with 2 integrated rotary axes for in-cycle loading/unloading — Fanuc robot loader WORKING RANGE — LINEAR AXES Spindle distance 250 mm X-axis 200 mm Y-axis (tool change position) 350 mm (525 mm) Z-axis 300 mm WORKSPINDLE HSK A40 Speed range 1 – 25,000 rpm Power (40% duty cycle) 18 kW at 10,500 rpm Torque (40% duty cycle) 17 Nm Nominal power 14 kW at 10,500 rpm Nominal torque 13 Nm Spindle bearing diameter 50 mm Spindle lubrication Minimum-quantity oil lubrication FEED DRIVES Three-phase linear motors, type 1FN3 (Siemens), with 3 cooling circuits. STANDARD PARAMETER SET X Y Z Max. rapid traverse 80 m/min 120 m/min 120 m/min TOOL MAGAZINE Rail-guided magazine chain in pick-up system. Magazine loading at ergonomic height, tools self-locking and protected against swarf and spray water. Air-sensing cleaning on magazine side. Maximum chain speed 100 m/min. Tool change system Pick-Up Capacity 2 × 20 magazine pockets INTEGRATED AUTOMATION WITH WORKPIECE MAGAZINE The machine is supplied with an integrated automation cell — an independent manufacturing cell with one-shift workpiece supply, ideal for small workpieces. Loading and unloading of the double swivel carrier are performed in parallel to machining time by an integrated 6-axis Fanuc LR Mate robot mounted on the ceiling, allowing more freedom of motion. The loading area is sealed against swarf and cooling lubricant, with parts lock for unprocessed and finished parts exchange in parallel with system production time. Podezh Sqzspfx Amyogp ROBOT — FANUC LR MATE 200ID The 7 kg robot performs multi-gripping, pallet movement, and handling of workpieces up to 0.7 kg with a double gripper. Internal line routing with integrated gripper control, ProfiNet communication between machine and robot. WORKPIECE MAGAZINE Workpieces are placed in pallets — up to 24 pallets stored in the elevator car, vertically cycled. Pallet size 632 × 436 mm (inlay 600 × 400 mm). Ideal for workpieces up to 100 × 100 × 50 mm. Pallet guidance in wear-free PE or hard-anodized PTFE-impregnated aluminum. Basic grid 18 mm allowing fine adjustment to workpiece height. Wear-free ball-screw drive.

Condition: excellent (used), Year of construction: 2019, operating hours: 288 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 1,100 kg, type of input current: three-phase, input voltage: 400 V, pressure: 4,000 bar, positioning speed: 6,000 m/min, water pressure: 4 bar, power: 37 kW (50.31 HP), Waterjet Cutting System All-Powerful Science & Technology Stock Co., Ltd APW 3015 BA Year of manufacture: 2019 Lightly used, very good condition Operating hours: 288 cutting hours, 2203 operating hours Travel distance X: 3000 mm Travel distance Y: 1500 mm Travel distance Z: 150 mm Maximum feed rate: 6000 mm/min Maximum pressure: 410 MPa (4100 bar) Continuous operating pressure: 340-360 MPa (3400-3600 bar) Swiveling cutting head, deflection range 0-10° Cutting accuracy: ± 0.1 mm The components used are from well-known manufacturers, e.g. SKF, Yaskawa, TBI Motion, etc. The high-pressure pump is from A&V Waterjet Tech Inc. USA Pedpfx Amezh Eq Usyegp A second, unused spare high-pressure pump is also installed. Machine dimensions, cutting table: 4200 x 2800 mm Space required for cutting table & control & pump & water filtration system and abrasive feed system approx. 6 x 5 m Water requirement for cutting at least 3.7 l/min, recommended 10 l/min Maximum workpiece weight: 250 kg/m² Axis drives: AC servo Pump power: 37 kW Connection: 400 V, 3-phase Special accessories, included in the price: Spare high-pressure pump Positioning laser Collision protection Air conditioning unit for oil cooling CAM software with part placement 4 clamping units 1500 kg abrasive blasting sand Removable protective covers Wastewater filtration system with filter fleece (Matchling MCL-P5N) Spare parts and wear parts set The machine is located in a precision engineering workshop. The protective covers reduce dust levels. Optional Commissioning, price based on effort Basic training, price based on effort

Condition: used, Year of construction: 2007, travel distance X-axis: 610 mm, travel distance Y-axis: 455 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 24 m/min, controller manufacturer: Siemens, Equipment: rotational speed infinitely variable, Ref. 5.3-787 Pgedewwi H Iepfx Amyep 1 used vertical machining center Microcut Challenger MCV2418, year of manufacture 2008 CNC control Siemens 24-position tool changer chip tray Technical data: X-axis travel: 610 mm Y-axis travel: 455 mm Z-axis travel: 520 mm Spindle taper: ISO40 Spindle speed: 8000 rpm Table clamping area: 762x363 mm Tool magazine positions: 24 Weight approx.: 3200 kg Technical data, accessories, and machine description are non-binding.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 2460065, Technical specifications: # Machining Workspace: X 300 mm; Y 500(725) mm; Z 375 mm # Axis Configuration: 3 linear axes (X, Y, Z) + 1 rotational table axis (A) and 2 rotational axes (B) with indexer head - Direct angular measuring system, maximum rotational speed: 50 min⁻¹, accuracy: +/- 5" # Maximum clamping/part dimensions: Ø 575 x 830 mm; maximum workpiece weight: 360 kg # Rapid traverse: X/Y/Z 65/75/75 m/min; positioning accuracy Tp: 0.008 mm # Spindle distance: 300 mm # Spindle speed: 1–17,500 rpm # Spindle taper: DIN69893-HSK-A63 (internal coolant supply) # Automatic tool changer: 2x32 tools, chip-to-chip average 2.5 sec # Maximum tool size: Ø75 mm / max. length 275 mm / 7.5 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Installation space: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring device: Heidenhain linear scales Psdexw Ttijpfx Amyogp # Chip conveyor/extractor: Knoll Type 550 K-1 # Oil cooling system # Oil filtration system max 80 bar: Knoll 550 K-1 450_2450 (can service 2 machines simultaneously) # Shaft cooling system, guideways, and control cabinet # 2 oil lubrication units # Oil vapor absorption/recovery system: IFS Vario E2000 (2,000 m³/h) # Fire protection: Kraft & Bauer # Part presence detection: with low-pressure air sensors # In-process control: Marposs T25 # Tool breakage monitoring and length measurement: inductive sensor # Toolholder detection system in working spindle # Documentation: Manuals only (printed) Machine condition: Operational / In working condition.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 2460062, Technical Specifications: # Machining Workspace: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis Description: 3 Linear Axes (X, Y, Z) + 1 Rotational Table Axis (A-axis) with index divider head, equipped with direct angular measuring system, number of revolutions: 50 minˉ¹, accuracy +/- 5" # Maximum Clamping / Part Size: Ø 575 x 830 mm; maximum weight 360 kg # Rapid Traverse Rate: X/Y/Z: 65/75/75 m/min; Positioning Accuracy Tp: 0.008 mm # Distance Between Spindles: 300 mm # Spindle Speed: 1–17,500 rpm # Spindle Interface: DIN69893-HSK-A63 (with internal coolant supply) Podpfx Aoxw Syuemyogp # Automatic Tool Changer: 2 x 32 tool positions, chip-to-chip average time: 2.5 sec # Max. Tool Dimensions: Ø75 mm / Maximum Length: 275 mm / Maximum Weight: 7.5 kg Electrical Specifications: # Voltage: 3x400V / 50Hz # Installed Power: approx. 85 kVA / 125A Dimensions: # Installation Footprint: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment Includes: # CNC Control: Siemens 840D SL # Linear Axis Measuring System: Heidenhain linear scales # Chip Conveyor: Knoll Type 550 K-1 # Oil Cooling System # High-Pressure Oil Filtration System (max 80 bar): Knoll VRF 450_2350 # Cooling System for Shaft, Guides, and Switchboard # 2 Oil Lubrication Units # Oil Vapor Extraction/Recovery System: IFS Vario E2000 (2,000 m³/h) # Fire Suppression System: Kraft & Bauer # Part Presence Detection: via low-pressure air sensors # In-Process Control: Marposs T25 # Tool Breakage Monitoring and Length Measurement: inductive sensor # Tool Holder Detection in Work Spindle Machine Condition: Operational

Condition: excellent (used), Year of construction: 1997, Battenfeld BA 800/315 CDC Closing 80 tons Year 1997 Pgedpfxsr Nf R Io Amyjp Scrow 40 mm distance between tie bars 37x42

Condition: good (used), Code: 0407 Brand: OMGA Model: BA 525 A - CE Standard Hardware assembly center for door and window frames - CE Standard Technical data: Work table covered with felted scratch proof strips , rear part pneumatically inclinable from 0° to 10° with intermediate angles Composition: Carriage with self-fed pneumatic screwer with Böllhoff loader, work stroke controlled by a pneumatic cylinder with a inclusion-exclusion system , height adjustment Right/left backstops for height positioning of right/left handle holes Drilling unit with 3-bit head for the execution of handle holes Pneumatically operated hydraulic shear for cutting hardware Work table size mm 3500 x 1230 Work table height mm 920 Max working dimension mm 2800 x 2450 Min working dimension mm 350 Pgodpjzcqxnefx Amyjp Dust collector Working pressure 6/7 bar Overall dimensions mm 3600 x 1700 x 1000 h Weight kg 480

Condition: used, Year of construction: 2002, x-travel 500 mm y-travel 500 mm Pedezgimkjpfx Amysgp z-travel 500 mm weight of the machine ca. 3800 kg

Condition: good (used), functionality: fully functional, Cutting speed, continuously variable: 20-70 m/min Saw blade: 3660 x 27 x 0.9 mm Pgsdpfx Amjzgdbieyop Feed length: 400 mm Cutting range – round / square: 250 / 250 mm Cutting range – rectangular: 300 x 260 mm

Condition: new, Heidenhain ROD 1020 2500 01-03 rotary encoder. 322 808-24 Serial number: 8196365A, unused, 100% functional, scope of delivery as shown in photos. Pgedjy Nqnwepfx Amyop

Condition: new, Heidenhain ROD 1020 2500 01-03 rotary encoder. 322 808-24 Serial number: 8178784A, unused, 100% functional, scope of delivery as per photos. Pjdey Nqnkepfx Amyegp

Condition: new, Heidenhain ROD 1020 2500 01-03 rotary encoder. 322 808-24 Serial number: 8196363A, unused, 100% functional, scope of delivery as shown in photos. Pjdpfxoy Nqnqe Amyjgp

Condition: ready for operation (used), Bosch BA 400 Euro Module PCD 52 DP DC-DC Converter, used, 100% functional. Pgodpfx Amsi D T Tpsysp

Condition: ready for operation (used), Control panel for OKK MCV-500 machine with Fanuc A860-0200-T021 pulse generator, used, good condition, fully functional, scope of delivery as shown in the photos. Pgjdpfx Amey Rci Noysp

Condition: ready for operation (used), Stromag FLP 20/0014-30 BA 1 servomotor, mounting hole spacing: 70x70mm, drive shaft diameter: 15mm, used, 100% functional Psdpfex Dwdlox Amyogp

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 6,500 kg, Bale Clamp ISO Class: ISO Class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully operational Technical Condition: Good Description: Year: 2020 ISO 4A (61 cm) Capacity: 6,500 kg Sideshift Opening range: 530–2,740 mm Width: 2,200 mm Clamp arms: 1,800 mm ID: OS1866 Pgjdpfxeyi Nbhe Amyjp

Condition: excellent (used), length 690 mm thread M16 height 1020 mm weight of the machine ca. 360 kg Angle table with breadboard table LxWxD: 1020x690x40 mm Fixing LxW: 330x690 mm Thread: M16 Psdpfszcgk Tsx Amysgp Weight: 360 kg

Condition: used, Year of construction: 1970, cutting diameter 250 mm saw band length 3660 mm Pgsdpfx Aexc Nwuomyjp cutting width 1,3 mm clamping range Länge 450 mm clamping range Höhe 250 mm cutting speed 20 - 70 m/min cutting capacity stufenlos mitter cutting - all-position 45 ° voltage 380 V frequency 50 Hz power capacity 0,55 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,0 x 1,6 m coolant device

Condition: used, Year of construction: 2020, gebraucht 2020 080210 prompt, Zwischenverkauf v 1170 € 1 1020 mm 2 mm 2 mm 1 mm 3 mm 135 ° 46 mm 1350 mm 960 mm 1145 mm 282 kg suctioned upper tool sectioned bending tool clamping by foot pedal operating manual with EC declaration of conformity in German BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Pgsdpfx Amezbu U Deyop Details:

Condition: excellent (used), Year of construction: 2020, operating hours: 23,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 120 m/min, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, torque: 80 Nm, controller manufacturer: Siemens, controller model: Sinumerik 840 D SL Solution Line mit NCU 730, workpiece diameter (max.): 1,830 mm, workpiece weight (max.): 800 kg, total height: 3,500 mm, total length: 5,900 mm, total width: 3,990 mm, overall weight: 24,500 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 17,500 rpm, operating hours of spindle: 8,000 h, Equipment: chip conveyor, Horizontal double swivel-beam machining center with 2 spindles - Linear and torque motors in the feed axes - Gantry drive for the Y-axis - Independent Z-axes and X-axes - Double swivel beam with two integrated rotary axes for loading and unloading parallel to main processing time - Siemens Sinumerik 840 D SL Solution Line control with NCU 730 - Oil distributor for NC rotary table - 1 set of clamping bridge supports - Torsion compensation - 5th axis directly driven twice - Boring head indexing - Base module for clamping hydraulics - Pneumatic pressure intensifier - Scraper belt conveyor - Automatic loading door - Emulsion mist extraction unit - Automatic rinsing cycle for loading area - Tool flatness monitoring - Position monitoring, base module and extension - Grating/walk-on grid - 24 quick-release couplings SW-ID No. 413288 - Tool breakage monitoring, inductive Pjdpsw Hgk Aefx Amyegp etc.

Condition: used, Vertical machining center LEADWELL MCV 610 CR CNC Fanuc 0M X 610 Y 510 Z 410 6000RPM ISO 40 The machine is in our warehouse in Gussago BS, under power Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets X axis: 610 Y axis: 510 Podpfx Amjtrbb Esyogp Z axis: 410 CNC type: Fanuc Spindle revolutions: 6000

Condition: used, Year of construction: 2015, POPP Banding Machine Psdpfjw Evcrex Amyogp The POPP Banding Machine is a powerful and precise device for bundling and packaging printed materials, paper goods, and other products using paper or film bands. It is ideally suited for use in printing houses, the graphic industry, as well as in logistics and packaging technology. The machine impresses with its robust construction, high flexibility, and easy operation. Special Features - Robust, industrial design for continuous operation - Flexible processing of various product sizes - Stepless speed control directly on the control panel - Product access optionally straight or transverse to the band running direction - Lockable foot stoppers for secure positioning - High performance: up to 600 stacks per hour - Easy integration into existing production lines - Suitable for various banding materials (paper, film) - Compact design for space-saving use Technical Specifications - Working width: 305 mm - Console width: 760 mm - Working height: 740 mm (lockable) - Product format (min.): 150 x 100 x 30 mm (L x W x stack height) - Product format (max.): 400 x 290 x 50 mm (L x W x stack height) - Maximum stacks/hour: 600 - Speed: 10 – 30 m/min - Speed control: 0 – 100% on the control panel - Machine dimensions (net): 1500 x 800 x 1700 mm (L x W x H) - Machine weight: 500 kg - Power supply: 400 V, 16 A, 3 phases, 50 Hz All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, travel distance X-axis: 1,016 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 720 mm, spindle speed (max.): 12,000 rpm, X-AXIS TRAVEL: 1016 MM Y-AXIS TRAVEL: 610 MM Z-AXIS TRAVEL: 700 MM SPINDLE SPEED: 0 - 12,000 RPM TABLE DIMENSIONS: 1300 X 670 MM MAXIMUM LOAD CAPACITY: 1200 KG SPINDLE MOTOR POWER: 21 KW WEIGHT: 10,500 KG DIMENSIONS: 4600 X 3600 X H 3300 MM CNC HEIDENHAIN iTNC 530 Pgsdpfeyb Ryvex Amyop ATC 30 PLACES CHIP CONVEYOR INTERNAL AND EXTERNAL COOLANT

Year of construction: 2022, condition: used, Are you looking for a reliable, highly accurate, and immediately operational solution for your filling process? We have a JM Tronic SmartDoser 1020 for sale, which is in excellent, absolutely clean condition. The machine comes from a well-maintained facility and has always been treated with the utmost care and cleaned according to strict hygiene standards. The absolute highlight for your investment security: > The integrated weighing unit has just been completely renewed. The heart of the machine is therefore in new condition! This guarantees you maximum weighing accuracy, perfect repeatability, and long-term reliability without any pending maintenance costs. Technical Data & Highlights Versatile applications: Perfect for bulk solids, powders, and granules (e.g., coffee beans, tea, spices, salts, sugar, flour, dried fruit, nuts, or small parts). Weighing range: Highly precise dosing from 5 g to 2,500 g. Material: Made entirely of high-quality, food-grade stainless steel (SS304 / 1.4301) – absolutely HACCP-compliant and easy to clean. Capacity: Large 25-liter hopper, height-adjustable by hand crank for optimal adaptation to your cans, jars, or bags. Intelligent automatic control: * Automatic weighing start: The filling process starts automatically as soon as a container is placed on the scale. No foot pedal is needed – this saves valuable seconds with every cycle! Recipe memory: Space for 10 different product and filling parameters. Convenient adjustment: Two analog rotary controls (potentiometers) on the front allow for quick adjustment of the coarse and fine flow rate during operation. Pgjdpfx Aezc Nf Temyjp Performance: Depending on the product and filling quantity, 5 to 16 cycles per minute are possible. Condition & Logistics Condition: Always used properly and professionally. The machine shows hardly any signs of wear, has no pending maintenance, and runs absolutely flawlessly. Connection: Very easy to connect via a standard 230V socket (tabletop model with a compact footprint of approximately 50x40 cm). Location: Cologne, Germany.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 850 kg, table width: 1,020 mm, table length: 610 mm, table load: 850 kg, overall weight: 8,400 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 9,200 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 32, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This extremely robust Kunzmann BA 1000 is in excellent condition and can be seen in operation in our showroom. It is a relatively compact machine, yet with a large working area (X:1020 mm - Y:620 mm), a table size of 1200x610mm, and a weight of 8,400kg. The machine is equipped with: chip conveyor, electronic handwheel, rinsing gun, Losma mist extraction system, Step-Tec spindle, Heidenhain TT 140 height gauge, 3 modular machine vices, 32 high-quality tool holders including cutting tools, and the original documentation. Pgsdpoxwk Nnefx Amyep