Used Comec Multiple Horizontal Vertical Drilling for sale (16,345)

Condition: used, Comec FM0/2000/CA Horizontal drilling machine with loader 6 horizontal heads + about ten other replacement heads and mandrels (see photo) 4 belt-driven motors Rjdpforkctcjx Aahjw Working length 200 cm

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA Rjdpfx Aaoyug R Rshjw • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: Rsdoyug Hxjpfx Aahew "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: used, functionality: unexamined, total height: 5,000 mm, total width: 1,200 mm, total length: 3,600 mm, input voltage: 400 V, input frequency: 50 Hz, DenoLift Vertical Carousel / Paternoster approx. 5 m – Fully Functional – Industrial We have a used DenoLift carousel (paternoster) that we are considering selling and would like to know if this system might be of interest to you. Specifications (indicative): Brand: DenoLift (Denocard) Type: vertical carousel / paternoster Rsdpfx Aajyplqrohew Dimensions: approx. 3.6 meters long × 1.2 meters wide Height: approx. 4 – 5.5 meters Control: numeric keypad with LED display (older model) Price: 5000 EUR This is an industrial storage system with significant capacity. The installation is currently set up and can be dismantled and collected by arrangement. Upon request, we can provide additional photos, a video of the system in operation, and any available technical data.

Condition: used, Year of construction: 1995, 1995 (CE) Comec MOV8UX+CAP(LV+LO) Mortising machine horizontal and vertical, for short parts, with double magazine for high productivity. Rodeykni Hspfx Aahow 2 vertical groups and 2 horizontal groups for each feeder.

Year of construction: 2002, condition: used, Manufacturer : Comec Rsdpfx Aex R Dgpjahow Model: Micronet-25-COSM Year : 2002 Type : DISPERSION & MILLING MACHINE   Useful volume : 3 - 22 L Motor power : 4 kW Material : stainless steel Electrical cabinet with variable speed drive. Work cycle timer for automatic stop. Double jacket Top loading of liquids Dispersion by deflocculating turbine + sand milling Continuous recirculation between the upper dispersion basket and the lower grinding chamber until the desired fineness is achieved. Cosmetic applications: Particularly suitable for the stable dispersion of oils in water, the addition of pigments and glues, and the mixing of colourants in products such as nail varnishes.

Condition: used, total length: 5,300 mm, total width: 2,600 mm, total height: 30,003,500 mm, water tank capacity: 25,000 l, External dimensions: W 2600 mm, H 3000/3500 mm, L 5300 mm. Rsdpfewnn Apox Aahsw Horizontal stainless steel tanks – 2 units. Manhole at the front 2.5" outlet at the end. AISI 304.

Condition: used, Year of construction: 2002, turning diameter 340 mm turning length 600 mm turning diameter over slide 300 mm control Siemens 840 D spindle passage 55 mm spindle nose ASA 6 number of spindle speeds 4000 U/min spindle motor 27 kW Number of tools 12 VDI 40 driven stations 12 VDI 40 rapid traverse 30 m/min power sub spindle 15 kw CNC- lathe with driven tools an subspindle Driven toolstation cannot be used due to cable breakage - chip conveyor - sub spindle - driven tool stations (not working) - tool measuring Redpfxjxvdrae Aahsw

Condition: new, • Working capacity 3300mm X, 200mmY, 180mm Z • 1 x vertical electro-spindle 7kw with saw • 1 x vertical electro- spindle 7kw 12 – 18000 rpm • 1 x electro-spindle kw1.7 with point to point vertical / horizontal drilling group • 1 x horizontal electro-spindle 5.6kw 12-18000 rpm • 4+4 work piece holding benches moveable on the X axis/ Each fitted with adjustable pneumatic workpiece clamps • L/H and R/H retractable work piece reference stops Rodpfx Asn Nv S Teahow • Stand alone electrical control cabinet with hand held remote control for machine set up • Simple parametric programming with 3D working models • Perimeter safety cabin with front doors, vertical operation, synchronised with machine cycle

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, HIGH PRODUCTIVE CNC MILLING/DRILLING/CUTTING WORKING CENTRE WITH 4 CONTROLLED AXES, 3 VERTICALS ELECTRO-SPINDLES 1 HORIZONTAL ELECTRO-SPINDLE • Heavy duty mono-block frame with electro-welded steel sheets. • Nominal working strokes: X-3350 mm; Y-200 mm; Z-180 mm • Possibility to work in two working fields - length 1500 mm each • Working head: With 3 axes CN Controlled equipped with Vertical and Horizontal electro-spindles. Linear and circular interpolation on 3 axes (X, Y, Z). • Axes positioning speed: max 70 mt/min. • Vertical Electro-Spindles: Rodpfew D D Dnox Aahjw 1 drilling spindle – 1.7 kW / 4350 rpm Equipped with point-to-point drilling head featuring: • 5 vertical spindles (32 mm center distance) • 3 double-exit horizontal spindles along Y-axis (32 mm) • 3 double-exit horizontal spindles along X-axis (32 mm) 1 milling/mortising spindle – 7.0 kW / 12,000–18,000 rpm 1 cutting/milling/drilling spindle – 7.0 kW / 8,000–12,000 rpm Multi-function aggregate • Horizontal Electro-Spindle: 1 milling/mortising spindle – 5.6 kW / 12,000–18,000 rpm Tool holder: ER32 collet • Working tables: 4 + 4 workpiece support tables. Mounted on adjustable slides, each equipped with: 4 + 4 vertical pneumatic clamping cylinders 2 + 2 horizontal pneumatic clamping cylinders Frontal and lateral reference stops • Control unit CAD-CAM: Stand-alone electrical cabinet with industrial PC (17” - touch-screen). Possibility of Network connection • Perimeter protection cabin made of panels with safety front door automatically activated and synchronized with machine cycle. • Voltage 400V / 50 Hz

Condition: like new (used), 30m3 insulated stainless steel tank Dim. 3.40x 6.80. 12 cm insulation, insulated with wool and metal sheet lower bottom insulated with polyurethane foam. Redpfxshr Rp So Aahew We offer transport with our own semi-trailer.

Condition: refurbished (used), 105m3 horizontal steel tank with heating coil Diameter: 2.80m Rodpfsxqfwtox Aahjw Length: 17.10m

Condition: used, 50 m3 / 50,000 l horizontal steel tank Diameter: 2.50 m Length: 10 m Weight: 16 t Redpfxextmzxj Aahow The tank is pressurized. Steel thickness: 20 mm / 2 cm Pressure: up to 20 atmospheres Steel cradles (legs) included

Condition: like new (used), Horizontal carbon steel tanks 73.000l Dim. 3x 11m Rsdpsibh S Hsfx Aahsw Cyllinder thickness 8mm Bottom thickness 12mm Equipped with a ladder.

Condition: new, functionality: fully functional, Comec RV516.ASM Valve refacing machine – new machine With standard equipment and variable valve speed device. Technical details: Rodpfx Ajnbdlmsahjw Valve stem diameter: 4-16 mm Valve stem length: 55-230 mm Valve head diameter: 114 mm Face angles: 0° - 60° Grinding wheel speed: 2800 RPM Main grinding wheel diameter: 215 mm Voltage – Hz – phases: 400V/50Hz/3 Fázis Main dimensions: W x L x H: 700 x 600 x 700 mm Weight: 142 kg If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: new, Year of construction: 2024, functionality: fully functional, VSM3.0DRO A-M Valve seat milling machine - new machine. Digital display valve seat milling machine. High precision valve seat milling machine specifically designed for multi-valve cylinder heads. Machining capacity from 16 mm to 90 mm. Variable speed from 100 to 1200 RPM. Rsdpfx Aaovmpnlehew Max. cylinder head width: 500/19,7 mm/inch Max. cylinder head height: 450/17,7 mm/inch Tilt degree of cylinder head: +42°- -42° Max. tilt degree of spindle: 5° Travel: -Cross: 930/37 mm/inch -Longitudinal: 40/1,6 mm/inch -Spindle: 200/8 mm/inch Spindle power: 1.8 kw Max. rotation speed of spindle: 0-1000 RPM Power supply: 380V/50Hz 3ph vagy 220V/60Hz 3ph Air compressor supply: 6/87 Bar/psi Noisy level: at 400 RPM 72dBA; at 1200 RPM 82dBA Weight: 1050/2310 kg/lb Dimension (L x W x H): 1040 mm x 1050 mm x 2170 mm

Condition: new, functionality: fully functional, PEG FM1 manual manual valve seat cutter. A cheap, precise solution for milling valve seats. Rsdpfexvc Nwjx Aahow Min. valve seat diameter: Ø 16 mm Max. valve seat diameter: Ø 65 mm Spindle stroke: 15 mm Rotation speed: 30 RPM - 100 RPM Power supply: 230V 1PH – 400V 3PH Motor power: 0.24Kw 1PH – 0.37Kw 3PH If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: new, Year of construction: 2025, functionality: fully functional, Kwik-Way SVS2 Deluxe Valve grinder machine - new condition With rocker arm grinder. Technical details: Precision 6-ball chuck Accuracy: 0,005 mm Minimum valve stem diameter: 4 mm Maximum valve stem diameter: 14 mm Minimum valve stem length (approx): 85,73 mm Maximum valve head diameter: 100 mm Valve grinding wheel diameter: 178 mm Surface wheel diameter: 76 mm Spindle drive motor (H.P.): 0,37 kW Chuck drive motor (H.P.): 0,06 kW Coolant capacity: 3,8 ltr Chuck R.P.M. (approx.): 100 - 300 Grinding angles: 13° - 62° Main dimensions: W x L x H: 940 x 559 x 406 mm Weight: 141 kg If you are interested, please contact me! More machines for sale: Rjdpfx Aasnacu Dehew Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: new, Year of construction: 2025, functionality: fully functional, CCT1600L A-M Pressure tester for cylinder head and block – new machine. Hydraulic tray lifting, motorized tray rotation. Technical details: Max. cylinder head capacities: Lenght x Width x Height: 1350 x 425 x 300 mm Capacity of stainless steel tank: 500 liter Rodpfx Aencd Ecjahjw Heating elements: 2 x 4,5 kw Hydraulic tray lifting Motorized tray rotation Hydraulic hoist: 0,75 kw Gear-motor: 0,25 kw Up and down travel time: 600 mm in 10 sec Thermostat: 0-90°C Power supply: 16kva-3x230v-ac-50/60hz Net weight approx: 600 kg Space requirements: Lenght x Width x Height: 2100 x 1050 x 1700 mm If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: good (used), Year of construction: 2007, Please check out our other listings as well. Rodpfjn Ry Nvex Aahsw

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 000929, saw blade diameter: 350 mm, pivoting range: 35 °, SECOND-HAND DOUBLE SIDED CUTTING SAW COMEC TYPE TD1200 CA - CE RULES - N.2 motors 2 hp - Blade diam. 350 mm - Min/max working length 220/1200 mm - Cutting inclinations: horizontal +/- 35°; vertical +/- 35° - Complete with manual and CE declaration - With automatic loader - Serial no. 000929 - Year: 2001 Rjdpfxex Rvmbo Aahjw - CE rules

Condition: excellent (used), Year of construction: 2014, Horizontal conveyor 2000x800mm Rsdpeu N Aykofx Aahow year 2014 price: €1,850.00 contact: Mr. Rainer Eckerle

Condition: used, Comec double drilling and mortising machine Horizontal spindles: Redjv Abfnjpfx Aahjw n.4 spindles (right + left) with 2 oscillations Vertical spindles n. 3 right heads with 3 points each n. 1 right-hand chuck with 1 tip n. 3 left heads with 3 points each n. 1 left chuck with 1 tip Maximum length of the workable piece: 900 mm

Condition: used, 1. Decoiler Brand : SCHLOEMANN Type : Hydraulic expanding decoiler Rjdsw Dd Igopfx Aahsw Function : Coil holding and controlled rotation Expansion control : Hydraulic Frame : Welded steel base with integrated brake Estimated capacity : 8–12 tons Coil bore : Ø 508 mm ----- 🔹 2. Straightener / Pinch Roll Manufacturer : COMEC (Société de Constructions Mécaniques de Creil) Type : Pinch roll and leveler Control : Mechanical Order number : 1305.1268 Recommended lubricants : Shell Macoma, Tellus, Alvania (as per nameplate) Function : Feeds and flattens strip before slitting Secondary role : Synchronized strip puller ----- 🔹 3. Slitter Manufacturer : COMEC Type : Circular blade slitting machine Drive : Mechanical gear train Blade adjustment : Manual Blades installed : ~10 sets (visible) Function : Longitudinal slitting of metal sheets into narrow strips ----- 🔹 4. Shear (End Cropper) Manufacturer : COMEC STAMCO Type : Rotating or inline shear Function : End cropping or final length cut Control panel : Electromechanical (visible on photo) Machine Application Complete line for metal coil slitting, producing narrow strips from master coils, with upstream flattening and final end cutting. Features / Differences – Heavy-duty hydraulic decoiler by SCHLOEMANN – Mechanical straightening section from COMEC – Manual-adjust slitter with circular blades – Outfeed shear for end trimming or final cut-to-length – Older but industrial-grade line, suited for medium gauge materials

Condition: used, Year of construction: 1996, SECOND-HAND CHAIR LEVELLING MACHINE COMEC MOD. EGS Rjdpswrb R Isfx Aahow - Volt. 380/50 - S/N 960416 - CE rules year 1996