Used Comec Md Jamb for sale (790)

Year of construction: 2006, condition: new, Hydraulic piston diaphragm pump, NEW Type:HMD-G-20-0125-PP Hedpfoix I Rfsx Aitonu Flow rate: approx. 10 m³/h Delivery pressure: 15 bar Year of construction: 2006 Pump #: 5100288-14 Further data: see type plates Area of ​​application: filter press feed, sludge transport, reactor feed in industry, mining, water and waste water management, etc. Delivery time: Available from stock Gladbeck! We offer you advice and service for all ABEL pumps, large ABEL spare parts warehouse, fast availability.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, tank capacity: 31,000 l, total length: 7,820 mm, total width: 2,550 mm, total height: 2,670 mm, overall weight: 36,000 kg, wall material: stainless steel, number of chambers: 1, operating temperature: 130 °C, operating pressure: 3 bar, pressure (max.): 4 bar, overpressure (max.): 6 bar, empty load weight: 4,650 kg, pressure: 4 bar, temperature: 130 °C, Equipment: type plate available, Stainless steel V4A tank container with a 50 cm dome lid and a second dome lid, also 50 cm (or 30 cm). Bottom outlet: 3-inch BSP, equivalent to 7.5 cm. Insulated (10 cm polyurethane), cleaned, (heating possible). Location: Rotterdam. Rental possible. Photos are archive photos; originals available upon request. All information is provided without warranty; errors and prior sale excepted. Hnodpfx Aijufgkvstou

Condition: used, Year of construction: 2001, Continuous press Manufacturer: Ligmatech Type: Optimat MDE 10 Year of manufacture: 2001 Technical data Body dimensions - Length: 300 - 2500 mm - Height: 300 - 1300 mm - Depth: 120 - 600/800 mm - Pressing forces are generated electrically, both horizontally and vertically, and can be varied independently Hsdpfx Aiszuzxbstonu - Pressing forces are applied vertically via a pressure plate and horizontally via 3 pressure jaws each - Pressing takes place centered and on a zero line on the operator side Positioning of the pressure jaws: - Top pressure jaw with forced guidance on the top press, optionally lowerable via cylinder - Middle pressure jaw freely programmable and motor-driven - Bottom pressure jaw freely programmable and movable via a common drive with the middle pressure jaw Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Indramat MDD071B-N-030-N2S-095GB1 Permanent Magnet Motor without encoder, serial number 09718, unused, 100% functional, scope of delivery as shown in the photos. Hnodpfx Ajztuk Ueitou

Condition: used, functionality: unexamined, Ferwood Code: RU0007572 - Manufacturer Code: MDD071B-N-040-N2S-095GA0 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Hnodpfjv Egkhjx Aiteu

Condition: used, Lathe Hans Schreiner MDB-S900, year 2015, in good condition, 1.5 kW, 900 mm distance between centers, 165 mm center height, 65-1810 rpm, 500 kg. Hsdjx H Uiyspfx Aitonu Price changes, errors, and typographical mistakes excepted.

Condition: used, functionality: unexamined, Ferwood Code: RU0012065 - Manufacturer Code: MDX61B0008-5A3-4-00 - Condition: Used - Functionality: Not tested - Compatible machine: - Weight: 3.5 kg - Dimensions: 46x39x27 - If interested, we offer a refurbishment service; please contact us. Hodoyz Uicjpfx Aitsnu

Condition: used, Year of construction: 2015, machine/vehicle number: MB536013A, functionality: fully functional, power: 28 kW (38.07 HP), input voltage: 400 V, input current: 54 A, input frequency: 50 Hz, overall weight: 2,800 kg, We are offering this used COSTA MD5CC 1350 belt grinding machine, manufactured in 2015. Model: MD5CC 1350 Serial number: MB536013A Voltage: 400 V Frequency: 50 Hz Power: 28 kW Current: 54 A Year of manufacture: 2015 Total weight: 2800 kg If you have any questions or require further information, please do not hesitate to contact us. Hodpezlcipjfx Aitjnu

Condition: excellent (used), Catalog number: 7937 TECHNICAL DATA Hnsdpfx Aozrnt Hoitsu - max. disc diameter: 500mm - spindle diameter: 30mm - pneumatic top pressure - disc guard - pneumatic disc extension - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 5.5kW - diameter of dust extraction nozzles: 120mm - table dimensions (length/width): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table + guide: 2050mm - outfeed roller table: 1650mm - roller table width: 510mm - overall dimensions of the machine (without table) (length/width/height): 1200x640x1280mm - weight: approx. 500kg ADVANTAGES – Polish-made – original technical documentation – 2 roller tables – pneumatic disc stroke – used saw, in perfect condition Net price: 14900 PLN Net price: 3465 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in exchange rates)

Condition: used, functionality: unexamined, Ferwood Code: RU0012065 - Manufacturer Code: MDX61B0008-5A3-4-00 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC LIGMATECH-HOMAG - Weight: 3.5KG - Dimensions: 46X39X27 - If interested, we offer a refurbishment service; please contact us. Hodpfezd E Rtex Aitsnu

Condition: used, Year of construction: 1972, machine/vehicle number: ROD24, 1 Demag KBK II wall-mounted slewing jib crane, 250 kg load capacity / lifting capacity Jib length 4m, load capacity 250 kg Equipped with Demag PK chain hoist, load capacity 250 kg Weight including wall bracket (recent date) approx. 350 kg Complete with chain hoist, cable trolley, travel carriage, and small parts Hsdexmuuaspfx Aitonu Slewing range 270° Item location: 75053 Gondelsheim The system is fully dismantled and immediately available Shipping via freight carrier or collection Please inquire shipping costs by postcode

Condition: new, Year of construction: 2025, The high-speed tablet and capsule counting and filling machine combines 16-channel counting channels. Compact design with dual-track conveyor does enhance the capacity of output. The counter is equipped with advanced detecting system which can count and fill all standard and irregular shapes and all sizes of tablet, capsules, caplets, soft gels. Suitable for all standard and irregular shapes of tablets, capsules, etc. Stable operation and low noise. Bottles are moved smoothly with dual track conveyor to the high speed filling station with dual-nozzle (number of nozzles customizable for surcharge). Easy to operate touchscreen. - Specifications: product sizes: min. Ø 3mm, max. Ø 15mm; number of vibrating tracks: 16; vibrating levels: 2; capacity for tablet example Ø 8mm: max. 3000 pcs/min; counting range: 1-9999 pcs; suitable bottles: 10-500ml, round or square; power: 220V,1.2kW; machine dimensions: L1360xW1650xH1650mm; weight: 420kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Hodpjv Nk Hzefx Aitsnu

Condition: new, Year of construction: 2025, Counting unit for products with a minimum diameter of 5mm. - Specifications: counting from 1 to 9.999 pcs; with a speed of: 1.200 pcs/min; stainless steel version; machine dimensions: L770xW660xH700mm; weight: 70kg; 220V, 0.2kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Hedjv Nk H Iepfx Aitsnu

Condition: new, Year of construction: 2025, The high-speed tablet and capsule counting and filling machine combines 16-channel counting channels. Compact design with dual-track conveyor does enhance the capacity of output. The counter is equipped with advanced detecting system which can count and fill all standard and irregular shapes and all sizes of tablet, capsules, caplets, soft gels with 99,9% accuracy. Suitable for all standard and irregular shapes of tablets, capsules, etc. Stable operation and low noise. Bottles are moved smoothly with dual track conveyor to the high speed filling station with dual-nozzle. Easy to operate touchscreen, stainless steel version (SS304). - Specifications: error rate: < 0.1%; number of vibrating tracks: 16; capacity: max. 5200 pcs/min; counting range: 15-9999 pcs; product sizes: min. Ø 3mm, max. Ø 22mm; container: Ø(25-75)xH(0-240)mm; infeed hopper volume: 38l; compressed air: 0.15m³/6bar; power: 220V/3.8kW; machine dimensions: L1800xW1550xH1750mm. Hedpfx Aiov Nk Ifotonu Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3650 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Equipment: - robust electro-hydraulic semi-automatic band saw (INDUSTRY) Hsdpfx Ajxaagboitonu - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: Hnedpfx Asxabpwjiteu - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: used, AD planer Hammer A3, year 2018, in very good condition, hardly used, 310mm planing width, incl. 1 set of spare knives (reversible knives), 3 kW, 3 knives, 300 kg Subject to price changes, errors, and misprints. Hodpfx Aiewzzfkotjnu

Condition: used, System: hydraulic piston membrane pump, used Type: REWA/Abel HMD-G-50-0500 Hnodpfxsib A Eqo Aitsu Article no.: A51-288 Construction: long Flow rate: max. 50 m³/h Delivery pressure: 15 bar Motor: 30 KW, 400 V, 50 Hz, 1500 rpm, Version: with control cabinet and frequency converter

Condition: good (used), functionality: fully functional, Rommel GmbH a Mühlbauer Company Transport module, BMD 500 2 S Model: BMD5002S Year of construction: 2004 Electrical data: Rated voltage: 230V AC Hjdsucd Ugopfx Aitenu Frequency: 50Hz Current: 2A

Year of construction: 2006, condition: new, Hydraulic piston diaphragm pump, NEW Type: HMD-G-12-0060-PP Flow rate: approx. 5 m³/h Delivery pressure: 15 bar Year of construction: 2006 Pump #: 5100288-12/PPM49b Further data: see type plates Area of ​​application: filter press feed, sludge transport, reactor feed in industry, mining, water and waste water management, etc. Hnjdpfxeix I Rqo Aitju Delivery time: Available from stock Gladbeck! We offer you advice and service for all ABEL pumps, large ABEL spare parts warehouse, fast availability.

Condition: new, machine/vehicle number: 85163, Attachment: Electro-hydraulic piston diaphragm pump (charging pump / filling pump) NEW! Type: Abel HMD-G-50-500 Identification No.: 85163 Flow rate: 50 m3/h Motor power: 30 kW Motor speed: 1465 rpm Piston diameter: 200 mm Suction-side connection flange: DN 125 PN 16 DIN 2633 Pressure-side connection flange: DN 100 PN 40 DIN 2635 Application: Filter press feeding Suction flow stabilizer: including vacuum breaker 0.5 bar Air feed fitting: on the suction and pressure sides, incl. pressure regulator, solenoid valve, check and throttle valves Other accessories: such as drain valve, pressure gauge, etc. Hsdod Ey Rijpfx Aitonu Photo: similar in design The Abel hydraulic diaphragm simplex piston pump in horizontal design is double-acting, slow-running, self-priming and dry-run safe. The pump's flow rate is efficiently controlled by a speed-controlled drive, depending on the delivery pressure, by means of a frequency inverter. We also offer our piston diaphragm high-pressure pumps in a special tunnel construction version. Do you have specific requirements? Please contact us.

Year of construction: 2009, condition: ready for operation (used), Used piston membrane pump, feeding pump Abel HMD-G-32-0250 Yer of construction: 2009 Capacity: max. 25 m³/h Hjded Hf I Rspfx Aitjnu Pressure: 15 bar Machine-number: 5100443-1 length: 3300 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, operating hours: 13,863 h, screw conveyor diameter: 90 mm, screw conveyor length: 2,880 mm, Krauss Maffei twin-screw extruder KMD90-32 in very good condition for sale. The extruder comes from a technical center and has seen little use. These are the original operating hours (13,863) from the first owner. An inspection with a test run is possible at any time. Technical data: - Year of manufacture 2004 - Original operating hours: 13,863 - Standard screw profile with up to 390 kg output per hour - C4 control system - Internal screw temperature control, welded screw tips - Including hopper, adapter, sensors, etc. - Screws and cylinder are in new condition. The screws have been removed and can be inspected on-site. Hnodpfx Aiez Ag Udotsu Loading with a forklift. Delivery, export documents or sea packaging available upon request.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tack room, High access door Equipment: - Ramp/door combination - Aluminum walls - Aluminum floor Net: €7,302.52 / Gross: €8,690.00 Article number: CG3A2011111.05 Technical data: • Brand: Cheval Liberte • Model: Gold 3 • Vehicle type: Horse trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 317 x 166 x 234 cm • External dimensions (L x W x H): 443 x 211 x 267 cm • Loading height of the floor: 35 cm • Permissible total weight: 2,600 kg • Unladen weight: 825 kg • Payload: 1,775 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185/65R14 • Suspension: Pullman2 coil spring • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Standard equipment: • Pullman2 chassis, single-wheel suspension with coil spring • Incl. wheel shock absorber (100 km/h) • Aluminum floor • Aluminum walls • External tie-down points, • Internal tie-down points, • Padded safety partition system • Height adjustment for partition bars • Depth adjustment for partition bars • Panic release at the front • Tack room inside with: Swiveling saddle holder, net, mirror, bridle holder • High access door • Access door lockable • Door lock on access door • 2x side sliding windows at the rear • PVC clear view partition • Large windows at the front, sliding open • 2x sliding windows at the front side • Rubber glued and sealed onto the floor • Hay net hooks • PVC clear view partition • Single wheel mudguards, plastic (black) • Interior light at the rear • Side padding (2 pieces) • Scuff protection on side walls (GRP plastic) • Roller blind as a net • Towing handle • Lifting device gas pressure shock absorber on tailgate • Step on tailgate • 3rd brake light on tailgate • Lighting system with reversing light • 13-pin plug _____ Hodpfxozy Ay Ro Aitonu Accessories can be retrofitted by our specialist workshop!! - Feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, Keller RECO RM-DPC Micro 10000 ATEX Differential Pressure Switch 8000280026 NOS New differential pressure switch / differential pressure controller RM-DPC Micro 10000 ATEX from RECO, listed here as a spare part for Keller Lufttechnik. Operating and installation instructions are available. Manufacturer: RECO Gesellschaft für Industriefilter-Regelung mbH Affiliation: Keller Lufttechnik GmbH + Co. KG Type: RM-DPC Micro 10000 ATEX Article number: 8000280026 Keller PN: 10602307 Device type: Differential pressure switch / differential pressure controller Measuring range: 0–10,000 Pa Analog output: 4–20 mA Supply: 24 V DC or 110/230 V AC Hnjdpfx Aijzxrq Aetju ATEX marking: II 3D Ex tc IIIC T85°C Dc Degree of protection according to nameplate: IP6X Ambient temperature: -20 to +60 °C ATEX certificate: BVS 03 ATEX E 144 X Design: Wall mounting Manufacturer's marking: 607334 001 / 2021 Condition: new / unused