Used Cnc Circular Saw for sale (13,835)

Condition: used, Year of construction: 2001, saw-blade dia. 400 mm Saw blade mounting hole 32 mm Saw blade motor performance 1,5 kW Saw blade motor speed 2.800 1/min cutting speed 59 m/s operating pressure 6÷7 bar Dimensions (LxWxH) 920 x 1.060 x 1.450 mm Kodpfx Akjyyqq Hjxjdk weight approx. 214 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), length ca. 3.200 mm width ca. 1.400 mm Kdedpfxoxwbpfj Akxok height ca, 1.600 mm Motors 2 table - swivable Ja The stable Bäuerle KFL combined woodworking machine combines a sliding table saw, slot drilling machine, and table router with feed in one machine and comes with a wide range of accessories. Roller table: yes

Year of construction: 1999, condition: ready for operation (used), An automatic single-head underfloor saw Emmegi including a chip extraction system is available. Cutting angle: 90°, feed travel: 0mm-1000mm, positioning accuracy: +/-0.5mm, saw blade diameter: 500mm, motor power: 6.6kW, weight: approx. 1000kg. An on-site inspection is possible. Ksdsyz Apqepfx Akxodk

Condition: reconditioned (used), 1 pair of PERSKE flat motors, 5.5 kW each, well suited for pre-cutting circular saws in front of band saw lines, one with a right-hand thread and one with a left-hand thread, rated continuous power 5.5 kW, with new ball bearings, with 2 steel brackets (left and right) for mounting Kodpfxouqk Azs Akxedk 1 KATT circular saw flat motor, 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second shaft stub for hydraulic pump drive with 150 mm Ø pulley, tested and fitted with new bearings, suitable e.g. for PAUL 27 AO cross-cut saw

Condition: used, Year of construction: 2007, machine/vehicle number: MR000798, Used circular saw with right-side extension and rear outfeed table. Technical specifications: - Maximum cutting width to rip fence: 1250 mm - Maximum saw blade diameter: 450 mm - Saw blade tilting range: 0–45° - Maximum cutting height (at 90 degrees): 130 mm Kodpfx Akeyzw Hqexodk

Condition: used, Year of construction: 1999, functionality: fully functional, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of Manufacture: 1999 General Information: Manufacturer: Kaltenbach Machine Type: Automatic saw and drilling line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drill Line: KALTENBACH APS 1003 Year of Manufacture: 1999 Kdjdpjyak Anefx Akxsk Condition: Used, fully functional Location: Germany Availability: Dismantling possible from mid/end of March 2026 Inspection: The system is operational and can be inspected under power Sale: Without guarantee or warranty Machine Description: For sale is a complete Kaltenbach saw and drilling system for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC as well as a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross transfer conveyors. The system is currently in operation and has been reliably used in steel construction until now. It is ideally suited for efficient processing of beams and profiles in both series and project work. Typical Areas of Application: - Steel construction / hall construction - Metalworking - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-part manufacturing Technical Data: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre cutting: swivelable on both sides +45° / –45° - CNC-controlled length positioning - Automatic sawing mode Drill Line APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drill portal - Suitable for web and flange machining Roller Conveyors & Material Handling: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross transfer conveyor: approx. 4,000 mm - Outfeed cross transfer conveyor: approx. 4,000 mm Condition: - System is complete and fully functional - Currently in operation - Age and usage-related signs of wear - Sale as is - No guarantee or warranty Scope of Delivery: - Bandsaw KBS 851 DGNC - Drill line APS 1003 - Infeed and outfeed roller conveyors - Cross transfer conveyors (infeed and outfeed) - Control cabinet / operating unit - Existing safety devices - Documentation where available Dismantling & Loading: - Dismantling to be carried out by the buyer - Dismantling possible from the end of March 2026 - On site available: * Forklift truck * 2 gantry cranes each with 5 t lifting capacity - Good site access and loading conditions

Condition: like new (used), Year of construction: 2022, functionality: fully functional, feed length X-axis: 9,040 mm, feed length Z-axis: 200 mm, feed rate X-axis: 60 m/min, saw blade diameter: 700 mm, saw blade width: 5 mm, spindle speed (max.): 5,000 rpm, We are offering an HM-Z3 CNC crosscut saw and milling combination (year of manufacture: 2022). The machine is in excellent condition, has hardly been used, and can be considered virtually as new. Due to a change in our workflow, this machine has become redundant and is now available for sale. If you have any questions or require further information, feel free to send us a message or give us a call. Kdodpfx Akjyzpm Nsxjk

Condition: repair required (used), Year of construction: 2009, functionality: limited functionality, machine/vehicle number: 305484, saw blade diameter: 450 mm, cutting height (max.): 160 mm, feed length X-axis: 2,000 mm, cutting range round steel at 45°: 150 mm, cutting range round steel at 90°: 150 mm, type of input current: three-phase, cutting range square steel at 45°: 140 mm, cutting range square steel at 90°: 140 mm, CNC cold saw from the renowned brand Kaltenbach, model KKS 401 NA 2000. There is a lot of technical data to list, so I have uploaded several photos with the basic specifications for you to get an overview of the saw’s capabilities. This is a rare model equipped with a feeder (individual lengths) from 0-2000mm, and for repeat operations from 2000-9999mm. Automatic zeroing before cutting. The CNC saw head features automatic rotation of +/-60 degrees, two types of lubrication (emulsion and direct spray application). You can select between ejection of cut pieces via a small parts ejector or by a chain ejector with a drop-down function for longer and heavier sections. The safety fence assembly with IC barriers and numerous spare parts are included with the saw (not shown in the pictures as it is not currently mounted). All original documentation is provided and corresponds to the machine's serial number, ensuring straightforward installation without guesswork. Explanation of the issue: the saw is connected to electrical power and every individual function (of which there are many) works perfectly. The problem occurs during automatic operation, most likely due to program parameter issues (it uses the Windows platform). I have not found a suitable programmer willing to learn on my machine. Possible solution: I have contacted the saw manufacturer and they referred me to their authorized service provider, whose contact details I can supply to the prospective buyer. Estimated repair costs in Serbia range from €3000 to €5000; if you are closer to Germany or the Czech Republic, the expenses are significantly lower. Therefore, there are two price categories: if you purchase the machine as is, the listed price applies; if I resolve the issue, the price will be considerably higher. The listed price includes professional dismantling and loading onto the truck (a significant cost factor that is far from negligible); transportation is at the buyer’s expense. I hope this clarifies the current condition of the machine to some extent. Wishing you a successful purchase. Kdedpfsyk Inpsx Akxsk

Condition: good (used), For sale is a used Holzprofi FPSF-2000 M combination circular saw and spindle moulder with a cutting width of 1000 mm. The machine is in good condition and has been serviced and inspected by our professional staff. (Fully operational) Technical specifications: - Circular saw tiltable 90-45° - Fixed spindle moulder - Sliding table 2500 mm - Cutting width 1000 mm Kdedsyx Ar Tspfx Akxek - Outrigger table with crosscut fence - Short mitre fence - Spindle moulder fence 240 mm - 3 spindle speeds: 3000/5000/8000 rpm - Dual motors, each 4 HP The machine is located in A-8561 Söding and can be inspected during our business hours. Subject to prior sale! Related terms: saw, circular saw, spindle moulder, combined machine, combination machine, milling machine Reference: R-Y00P2

Condition: used, Heavy saw head with robust base and material clamp for non-ferrous metals and aluminium. More powerful motor, with pneumatic feed and 2 pneumatic material clamps. Kjdpfx Ajyzghdjkxsdk

Year of construction: 1995, condition: excellent (used), Very well maintained pre-cutting circular saw for side goods. With hydraulic power unit and accumulator, double clamping hydr. Attachment kit with measuring roller for riving knife. Electric control cabinet with control. Control panel with digital dimension input and operation. Kdodpfxeh Eyqve Akxsk Photos show original condition.

Year of construction: 1987, condition: not inspected (used), Sharpening machine for metal and segmental circular saws. Circular saw blade diameter from 80 - 710 mm. Any tooth pitch. Tooth height 1.2 - 14 mm. Working speed infinitely variable 15 - 180 teeth / min. Wet grinding device, NC controlled, Ksdslmkpfspfx Akxodk

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Kdsdpfxoxqtvqj Akxok

Condition: ready for operation (used), Machine is disconected from power. Kdjdpfx Ajhva I Ijkxjk

Condition: good (used), saw blade diameter: 400 mm, – Double miter – Mist lubrication system – Protective cap Kedpfxsim Ezge Akxodk – 400V

Condition: new, Table size: 420 x 450 mm Kdedpsc Snvfsfx Akxok Table height: 215 mm Table swivels up to: 45 Saw or cutting blade Ø: 200 mm here cutting depth: 47 mm electrical connection: alternating current 230 V weight: 14,5 kg

Condition: used, Year of construction: 2009, Sawblade tiltable 45 ° Kdedpfx Akeywnvnsxjk cutting width 95 × 60 mm Motor output 1,3 kW bis 1,8 kW kW Saw blade diameter 315 mm Dimensions (L/W/H) 1100x900x1450 mm machine weight ab. 230 kg

Condition: new, Year of construction: 2026, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Kdedefv T Anjpfx Akxjk

Condition: new, Year of construction: 2026, Aluminium Circular Saw UK 600 HA 90°, Semi-Automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile materials made of cast aluminium, copper, and hard plastics (limited suitability for solid material). The machine is characterized by its easy operation and quick, convenient material changes. This model only allows for 90° cuts! The saw feed operates automatically at the press of a button, and material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard features include a minimum quantity lubrication system and an air spray gun for machine cleaning. This machine is equipped with connections for a chip extraction system. Additionally, it can be optionally fitted with a digital mitre angle display, a layout laser, and pneumatic lifting for the protective hood. Equipment: - Large support table, high-performance drive motor - Two-button control for initiating the sawing process (optional single-button control available) - Intuitive control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydro-pneumatic saw blade lifting with oil level indicator - Fixed material back jaw can be moved rearwards to increase cutting capacity - Large protective hood covers the entire working area - Minimum quantity lubrication system with 2-litre reservoir - Adjustable saw blade feed speed - Air gun for machine cleaning - Saw blade diameter: 600 mm Work Sequence: Kjdopa Nxdjpfx Akxodk 1. Set the cutting angle 2. Insert the material 3. Adjust lift speed 4. Bring clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the start button – the machine is ready for operation 7. Press and hold both SAW buttons to initiate cutting 8. After cycle completion, release SAW buttons and press the STOP button 9. Open the clamping fixture and remove or advance the material For technical data such as cutting range, performance, etc., please refer to the data sheet in the email attachment. We look forward to your inquiry! Plantec Maschinen GmbH

Condition: new, Year of construction: 2026, Aluminum circular saw UK 650 HA, semi-automatic The UK 650 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 650 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 650 mm workflow Kjdpfx Ajidun Dekxedk 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Aluminum circular saw UK 352 P, manual The UK 352 P semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material Kdjdpfx Aoidunvekxsk as well as simple miter angle adjustment. The UK 352 P has an infinitely adjustable miter range left up to 45° and right up to 0° The saw feed takes place automatically at the touch of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. Connections for a chip extraction system are available on this machine. equipment manual guiding of the saw blade Double miter 30° - 90° - 0°, large support plate, powerful drive motor Clear control panel Two vertical pneumatic clamping cylinders Fixed material positioning jaw, can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area minimum lubrication system Air gun to clean the machine Saw blade ø 350 mm workflow 1) Setting the cutting angle 2) Loading the material 3) Bring the clamping cylinder up to 20 mm of material 4) Pneumatic clamping of the material 5) Press the start button to start the saw blade 6) the saw cut must be carried out manually with a hand lever 7) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine predominantly used for cutting profile materials made of aluminum cast, copper, and hard plastics (solid materials are possible to a limited extent). The machine stands out for its ease of use, rapid and convenient material change, and simple adjustment of mitre angles. The UK 352 HA features a steplessly adjustable mitre range from 45° left to 0° right. Saw feed is automatic at the push of a button, while material clamping is handled by two pneumatically operated vertical clamping cylinders. The machine comes standard with a minimum quantity lubrication system and an air spray gun for cleaning the machine. Connections for a chip extraction unit are provided on this model. Kedpfx Asgwt Rrskxjdk Equipment: • Precision under-table circular saw • Mitre adjustment: left 45º / 90º / right -45º degrees • Includes 2 pneumatic vices (vertical) • Steplessly adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Extraction connection for chip extraction unit • Mist spray device for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure regulator included • Ergonomically positioned control panel • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included in delivery! You are welcome to view the desired machine at any time in our production/showroom. Please feel free to contact us for an appointment. We look forward to your enquiry! Plantec Maschinen GmbH

Condition: new, Year of construction: 2026, Aluminum circular saw UK 352 M, manual The UK 352 M manual circular saw is an "upcut" machine and is mainly used for individual cuts in aluminium, copper profiles and hard plastics (requires solid material). The The machine is characterized by easy handling and fast, convenient changing of the material and simple adjustment of the miter angle. The UK 352 M has a stepless adjustable miter range left up to 45° and right up to 0°. The saw feed is manual via a hand lever, the material is clamped manually. Kjdpfjidunnsx Akxedk equipment Double miter 45° - 90° - 0°, large support plate, powerful drive motor Clear control panel A manual clamping cylinder Fixed material feed jaw can be moved backwards to increase cutting capacity large protective hood, covers the entire work area Saw blade ø 350 mm workflow 1) Setting the cutting angle 2) Loading the material 3) manual clamping of the material 4) Press the start button to start the saw blade 5) the saw cut must be carried out manually with a hand lever 6) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The UK-400-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-400 A has an infinitely adjustable miter range left and right up to 20° (swivel range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Kjdpfx Aksgwt Rnoxodk Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 130mm • Saw blade 400mm • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment left 45º / 90º / right-45º degrees • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel Kodpfx Aegwt Ryskxsdk • maximum cutting height 125 mm • Saw blade 350mm • Saw blade not included!