Used Cloos Qintron 400 Fc 100E-Kit for sale (21,497)

Condition: used, Heidenhain TE 400 control panel Condition: used functional Tjdpfsylc Aksx Acnsb Heidenhain TE 400 ID 250 517-03

Condition: new, functionality: fully functional, Siemens Simotics SD three-phase asynchronous electric motor with a cast-iron housing. It is a four-pole motor (1,500 rpm), frame size 250M, with a power output of 55 kW at 50 Hz. Key technical specifications • Power: 55 kW (at 50 Hz / 400 V / 690 V) • Frame size: 250M • Number of poles: 4 (approx. 1480 rpm) • Construction: Cast-iron housing (suitable for demanding conditions) Todpfxozr Exyo Acneb • Efficiency: Class IE2 (High Efficiency) • Protection rating: IP55 [1, 2, 3, 4, 5] The Siemens 1LG6 220-4MA66-Z is a three-phase asynchronous motor with a power output of approximately 37 kW, frame size 225, IP55 protection, and a speed of around 1470 rpm.

Condition: ready for operation (used), Year of construction: 1997, SCHMID T3-400 2 Nutation Press / Taumelpresse Manufacturer: SCHMID Manufacturer location: Rapperswil, Switzerland Model / Type: T3-400 2 Machine No.: T3-400 2 / MK20166 Year of manufacture: 1997 Country of manufacture: Switzerland Machine type: Nutation press / Taumelpresse Control: Siemens PLC Operation: Automatic / PLC controlled Technical Data Press type: Nutation press / orbital forming press Nominal press capacity: 400 t / approx. 4,000 kN * Number of pressing stations: 2 / double station configuration * Working direction: Vertical Press construction: Four-column press Tool / die arrangement: Upper and lower tooling Operation: Hydraulic Machine cycle: Automatic / programmable *The 400 t capacity and interpretation of “2” as the machine configuration are consistent with the T3-400 designation, but I would not advertise those two as manufacturer-confirmed specifications unless you have the original technical manual. Control & Electrical Equipment Control system: Siemens PLC PLC hardware: Siemens SIMATIC Power supply module: Siemens SITOP PSU8200 Operator control: Machine-mounted control panel Electrical cabinet: Separate integrated electrical cabinet Electrical Data Connection voltage: 3 × 400 V Frequency: 50 Hz Total connected load: 170 kW Minimum mains fuse: 400 A Control voltage: 230 V AC / 24 V DC Lighting voltage: 230 V AC Electrical schematic No.: 21.10.4060 These values are directly readable from the SCHMID machine plate in your photo. Press / Working Area Press frame: Four-column construction Number of columns: 4 Lower tool table: Circular tooling / die mounting arrangement Todpozvnqtsfx Acnob Upper tool holder: Circular tooling arrangement Machine enclosure: Fully enclosed working area Access: Front access door Automatic workpiece handling: Integrated Hydraulic lubrication system: Yes Production Counter Total strokes displayed: 19,304,255 strokes

Condition: used, Year of construction: 1997, SCHMID T3-400 3 – TECHNICAL DATA Manufacturer: SCHMID Manufacturer location: Rapperswil, Switzerland Model / Type: T3-400 3 Machine No.: T3-400 3 Year of manufacture: 1997 Country of manufacture: Switzerland Machine type: Hydraulic nutation / orbital forming press (Taumelpresse) CE marked: Yes PRESS DATA Nominal press force: 4,000 kN Equivalent press force: approx. 408 metric tons Operation: Hydraulic Working direction: Vertical Press construction: Four-column press Number of columns: 4 Forming process: Nutation / orbital forming Tool arrangement: Upper and lower tooling Operation mode: Automatic / PLC controlled HYDRAULIC SYSTEM These specifications are confirmed directly by the machine plate in your new photo: Press force: 4,000 kN Hydraulic oil capacity: 1,500 litres Lubricating oil capacity: 350 litres Maximum hydraulic pressure: 250 bar Maximum lubrication pressure: 315 bar ELECTRICAL DATA From the other T3-400 nameplate you sent earlier: Tjdpfxozvnr Re Acnob Connection voltage: 3 × 400 V Frequency: 50 Hz Connected load: 170 kW Minimum mains fuse: 400 A Control voltage: 230 V AC / 24 V DC Lighting voltage: 230 V AC Electrical schematic No.: 21.10.4060 CONTROL & ELECTRICAL EQUIPMENT Control: Siemens PLC PLC system: Siemens SIMATIC Power supply: Siemens SITOP Operator panel: Machine-mounted control panel Electrical cabinet: Integrated/separate machine electrical cabinet Automatic operation: Yes Parameter-controlled operation: Yes Emergency stop: Yes MACHINE / WORKING AREA Press frame: Four-column construction Working area: Enclosed Lower tooling: Circular die/tool mounting arrangement Upper tooling: Circular tool arrangement Automatic workpiece handling: Integrated Hydraulic lubrication: Yes Hydraulic power unit: Integrated Pressure monitoring: Yes

Condition: new, functionality: fully functional, fuel type: hybrid, Year of construction: 2026, FABO Mobile cone crusher with post screen FTC300S Todpfxozvp Uaj Acnob Fabo mobile cone crushers are designed for durability and long service life due to the robust chasis and wear resistant components the improved design let the Wearing parts are easily accessible and replaceable. And also ensure that maintenance is carried out in complete safety. User friendly has always been the key. Simplifying the operation of a complex machine has been done in Fabo mobile cone crusher Control is by wireless remote control or by cable connection . Starting the mobile cone crusher is as simple as pressing the start button.The running parameters controlled by PLC program.and all electrıcal hardware and software can be controlled via to internet connection at anywhere in the world . The ftc 300S mobile cone crushers from the FTC 300S range are capable of high reduction ratios and excellent cubical shape at highly output rates. They are used in various applications such as aggregate crushing, mining and recycling. In addition, the machine's compactness, mobility and dust reduction system make it ideal for contractors or aggregate producers working in urban areas. Using Fabo cone crushers, these units are powerful crushers capable of crushing medium-hard to hard natural stone, including abrasive varieties. Ftc 300 hybrid mobile cone crushers equipped with single deck post screen to get desired exact size for final product and available in a range of sizes and features. They can be supplied as standard or customised according to customer needs

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 850 mm, travel distance Z-axis: 315 mm, spindle motor power: 58,000 W, spindle speed (max.): 4,000 rpm, total height: 3,000 mm, total width: 4,500 mm, overall weight: 9,000 kg, product length (max.): 9,500 mm, number of axes: 2, Vertical turning machine manufactured in 2007. This EMAG VSC 400 features a turning diameter of 400 mm and a swing diameter of 420 mm. It offers an X-travel of 850 mm and Z-travel of 315 mm, with a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 400 machine we have for sale. Contact us for further details regarding this machine. Tedpfozrnwrox Acnob - Turning Diameter: 400 mm- Swing Diameter: 420 mm- Spindle Head: DIN 55026 - Size 11- Spindle Bearing Diameter: 140 mm- Rapid Traverse X + Z Axes: 45 / 30 m/min- Feed Force Z/X: 11 kN- Total Power Requirement: 58 kW- Installed Power (Nameplate): 54 kW- Frequency: 50 Hz- Voltage (Power): 400 V- Control Voltage: 230 V- Nominal Current: 104 A- Cos Phi: 0.83- Fuse Protection: 125 A- Features: Hard turning, Dry machining, Chip conveyor Technical Specification Driven Tools No

Condition: used, Year of construction: 1976, pressure 400 t stroke 30 - 300 mm no. of strokes 55 /min throat 500 mm passage to the back 800 mm dayligth 950 mm table surface area 1580 x 1000 mm hole in the table 400 x 400 mm table height over floor 800 mm Tjdpfozrpqgox Acnsb ram surface 1000 x 720 mm ram adjustment 125 mm power requirement 37,0 kW Weight 25,0 t dimensions (WxDxH) 2,5 x 3,1 x 5,1 m with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, semi-automatic stroke adjustment, motorized ram adjustment, pneumatic counterbalance in ram, fix table, motorized central lubrication, two-hand operation

Condition: used, Year of construction: 1987, pressure 400 t table length 2500 mm Todpozrpuxefx Acnsb table width 2000 mm Distance between columns 2000 mm Stroke 2600 mm Distance table/ram, stroke up 2500 mm Table surface area 2000 x 2500 mm Table height above floor 1120 mm Ram surface 2000 x 2500 mm Side window 1500 mm max. capacity of swivelling ram plate 20 t Oil volume 1000 l Power capacity 48,0 kW Weight 85,0 t Dimensions (WxDxH) 8,6 x 5,3 x 8,2 m with swivelling ram, movable table, inclining table, ejector in table stored in dismantled condition - Video at seller's site before dismantling available

Condition: new, Heidenhain LID 400-0010, scale 01UML0050Z0025, serial number 7827134, part number 232206-18. Unused, in opened original packaging, 100% functional. Scope of delivery as shown in the photos. Tsdpfxsi Eanws Acnsb

Condition: ready for operation (used), Siemens 6ES7416-3FR05-0AB0 S7-400, CPU 416F-3 PN/DP central processing unit, version E, condition 4, software version V5.2.0, serial number as per photo, like new, professionally tested, 100% functional, scope of delivery as shown in the photos. Tjdpfxei Edt Re Acnsb

Year of construction: 2020, condition: ready for operation (used), Saw blade diameter: 2x400mm, max. cutting length: 4000mm, cutting angle: +/-45°. Documentation available. On-site inspection is possible. Tsdpowfg Hbsfx Acneb

Year of construction: 1998, condition: ready for operation (used), Volume flow: 13,600m³/h, pressure increase: 3100Pa, rotational speed: 1500/min, motor power: 18.5kW, weight: 790kg, with Chip Container STBB HAB S, including full documentation. Tedpfxei A Ix He Acnob

Condition: ready for operation (used), Year of construction: 1977, Operating hours: 4280h, Track shoe width: 550mm, Track gauge: 1520mm, Track contact length: 2090mm, Undercarriage length: 2080mm, Blade width: 3000mm, Machine dimensions X/Y/Z: approx. 52050mm/1900mm/1850mm, Weight: approx. 10000kg. An on-site inspection is possible. Tedozf Ncvepfx Acnsb

Condition: used, mileage: 167,307 km, power: 257 kW (349.42 HP), first registration: 07/2006, fuel type: diesel, empty load weight: 15,850 kg, maximum load weight: 10,150 kg, overall weight: 26,000 kg, tire size: 315 / 80 R 22,5, axle configuration: 6x2, wheelbase: 4,200 mm, brakes: constant throttle, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel-air, number of seats: 2, total length: 9,670 mm, total width: 2,500 mm, total height: 3,550 mm, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, Vehicle location: Bovenden, license plate house, 1x air seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, radio, cruise control, ABS (anti-lock braking system), constant throttle, raised exhaust, automatic, lifting+lowering, central lubrication system, differential lock, fog lights, rotating beacon, leaf-air suspension, low-noise G1, last axle forced steering, environmental badge green Wheelbase: 4200 mm Body: FAUN POWER PRESS 524 , WAAGE SYWATEC scales Sywatec weighing range 200kg-12000kg, reversing camera Vehicle is without engine!!! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Tedpfxevhhgvs Acnsb - .

Year of construction: 2025, condition: new, functionality: fully functional, overall weight: 700 kg, total length: 2,860 mm, total width: 1,230 mm, construction height: 1,700 mm, Fully operational exhibition dryer, Ø 1090 mm We are offering our fully operational exhibition dryer with a diameter of 1090 mm. The unit is very compact and practical in terms of required space and easy relocation. Technical Details: Connection: only a water connection for spraying and a 16A power plug are required Heating system: 4 kW electric heater Wood moisture measurement at 3 measuring points Plug-and-play design – ready for immediate use Advantages: Ideal for small carpentry workshops Easy to transport and flexible positioning Todpfxoxbz Hro Acnsb

Condition: used, total height: 1,850 mm, total width: 1,200 mm, total length: 1,300 mm, Colour: Grey Empty weight: 1.050 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical - Power [kW]: 3.0 - Number of axes [pcs]: 3 Tsdpfx Aex Hiibscnsb - X-axis travel [mm]: 400 - Y-axis travel [mm]: 300 - Z-axis travel [mm]: 400 - Table length [mm]: 750 - Table width [mm]: 300 - Tool holder: SK40 - Main spindle power [kW]: 2.2 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 1600 - Options: Digital readout - └ Type of digital readout: Heidenhain - Transport dimensions: 1300mm x 1200mm x 1850mm (l x w x h) - Transport weight [kg]: 1050kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1957, Speeds 150 strokes Hand ram adjustment 0 - 60 mm Large tooling package ca 12 units Wheeling tooling set (englisch wheel) Vertical troath 250 mm Horizontal Troath 400 mm Length:1500mm Width:600mm Height:1800mm Weight:1800kg Tsdjw Rcc Uspfx Acnob Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening Machine equipped for tooling: 1, 1.5, 2, 4 mm tooling FWR FWA LFA LFA

Condition: good (used), Year of construction: 2000, Arburg 270 C 400-100 (2000) Clamping force: 40 t Screw diameter : 20 mm Distance between tie bars : 270 x 269 mm Tsdpfexqfi Aex Acnsb Shot weight : 25 g Type : horizontal Drive : hydraulic Working hours : 138000 h

Condition: used, Year of construction: 2017, Horizon HOF-400, fully automatic feeder, used. This robust, fully automatic feeder was specially developed for the offline production of digitally printed booklets in conjunction with the SPF-200A, SPF-200L booklet making units, the StitchLiner 5500 and other optional additional devices. The sheets are removed sheet by sheet, checked, grouped and fed to the downstream unit in a block. Mark reading ensures reliable grouping and the production of brochures in different sizes. Special features: - Maximum flexibility at an extremely attractive price-performance ratio - Reliable paper feed thanks to suction belt feed - Extremely short set-up times thanks to fully automatic format adjustment - Extremely easy operation and set-up in seconds thanks to TOUCH&WORK technology - Economical processing of small and medium volumes in top quality Technical specifications: - Infeed format 4-sided sheets min. 203 x 203 mm, max. 610 x 356 mm (depending on downstream unit) - Paper thickness 50 - 160 g/sqm for normal paper / 70 - 160 g/sqm for coated paper - Loading capacity max. 620 mm - Speed A3 format max. 25,000 sheets/h Tsdpoyzgamjfx Acnjb - A4 format speed max. 35,000 sheets/h / max. 45,000 sheets/h (landscape) - Weight 782 kg (with front cutter FC-200A) - Machine dimensions 960 mm x 1,050 mm x 936 mm (LxWxH) - Power supply 400 V 1.8 A, 1.0 kW All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t Tedjzrpt Uspfx Acnjb dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 037611, Equipment: chip conveyor, documentation/manual, Offering a used Wemas Turn 400 in very good condition. Tsdpfx Acszav H Ejnob

Condition: excellent (used), Catalogue number 7975 TECHNICAL DATA - Infeed width: 450 mm - Infeed height: 250 mm - Shaft width: 530 mm - Knife length: 530 mm - Number of knives: 2 pcs - Sieve dimensions: 50x50 mm - 2 toothed feed rollers from below - Lower feed roller motor approx. 2.2 kW - Toothed feed roller from above - Upper feed roller motor approx. 2.2 kW - Conveyor belt - Conveyor belt length: 6500 mm - Conveyor belt width: 400 mm - Main motor 37 kW - Conveyor motor 0.37 kW Tsdozr Iwfepfx Acnsb - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 2400x1300x1100 mm - Conveyor overall dimensions (L/W/H): 6600x610x550 mm - Weight approx. 2500 kg – German manufacture – Autoreverse (adjustable) – protects the machine from blockage and damage in case of overload – With 6500 mm conveyor – Used shredder, in very good condition Net price: 115,900 PLN Net price: 27,600 EUR based on 4.2 EUR rate (Prices may change with significant currency fluctuations)

Year of construction: 2002, condition: ready for operation (used), A relatively lightly used Traub CNC universal lathe is available. Spindle bore: 82mm, max. chuck diameter: 315mm, turning length: 750mm, X/Z travel: 360mm/750mm, Z-axis travel: +/-60mm, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 3250mm/1900mm/2300mm, weight: approx. 7800kg, operating hours: approx. 21812h. Documentation available. An on-site inspection is possible. The image is for reference only. Tsdpfxszhnrnj Acneb

Condition: used, machine/vehicle number: 8799, Inlet: 400 x 800 mm Rotor diameter: 400 mm Todpoyr I Hbsfx Acnjb Width: 800 mm Rotor blades: 5 Stator blades: 2 Drive: 45 kW Sprue mill, granulator, plastic mill, cutting mill

Condition: used, machine/vehicle number: 12677, Rotor diameter: 400 mm Tjdpsyr Tqlsfx Acneb Rotor width: 600 mm 3-knife rotor 2 rows of stator knives Infeed cross-section approx. 600 x 660 mm Drive motor: 30 kW