Used Charger For Forklift 24 V/50 A for sale (104,218)

Condition: used, functionality: fully functional, Year of construction: 2008, load capacity: 5,000 kg, lifting height: 4,500 mm, free lift: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,150 mm, motor manufacturer: Perkins, Equipment: cabin, lighting, Side loader BAUMANN GX50/12/45 Year of manufacture: 2008 According to the meter: 16,681 operating hours 5 ton lifting capacity 3.15 m overall height 4.50 m lifting height Fgedpeyua Txsfx Albjg 60 cm free lift! Perkins engine Hydrostatic drive - Fork positioner - Separate fork lift - Cabin with heating - Lighting system - Pneumatic tyres - Immediately ready for use - Including Dutch road approval Sales price: €13,500 net Affordable delivery possible!

Year of construction: 2015, condition: ready for operation (used), Three Rehm reflow soldering ovens for the printed circuit board industry are available. 1) 2x Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kW, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026. Fsdpfjzghf Eex Albsgg

Condition: good (used), functionality: fully functional, Year of construction: 2022, battery capacity: 225 Ah, remaining battery capacity: 74 %, battery voltage: 24 V, total length: 645 mm, total width: 195 mm, total height: 575 mm, overall weight: 193 kg, Forklift battery 24V 3PzB225, battery 74% TESTED For Toyota & BT with battery lock Year of manufacture: 2022 Weight: 193 kg Dimensions: 645 mm x 195 mm x 575 mm Battery has been serviced and tested by a specialist company Capacity test (C5 discharge test): 168/225 Ah Fedpfoy Ryimex Albegg Remaining capacity: 74% With Aquamatik filling system (BFS) With pole screws but WITHOUT end cable

Condition: used, Year of construction: 2013, Claw Vacuum Pump Dry Manufacturer: Busch Type: Mink MM 1502 AV V8 Motor: DS 400V Suction capacity: 500/580 m³/h Ultimate pressure: approx. 200 mbar (abs.) Accessories: Intake filter; Operating instructions Delivery time: Short term Fgodpfxsv I Agds Albog

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors! Fsdpfx Asyyz Ebolbegg

Year of construction: 2005, condition: used, fuel type: electric, Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump Fjdpfx Aei Aqa Ujlbogg -Manufacturer: Bosch, hydraulic pump hydraulic unit from electric forklift Jungheinrich ESE 320 G 20-240-54 -Hydraulic pump: Type -Motor: Type 1 547 220 535 24 V 2.2 kW -with: tank and control valve -Dimensions: 175/160/H365 mm -Weight: 9,6 kg

Condition: used, Year of construction: 2018, operating hours: 6,442 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X working area: 3000 mm - Y working area: 1550 mm - Z clearance: 250 mm Axis Systems - X-axis: Helical rack and pinion drive - Y-axis: Precision ball screw drive - Z-axis: Precision ball screw drive - Linear guides on all axes - Automatic central lubrication Fsdozuw E Repfx Albsgg Main Spindle - 5-axis electro spindle - Type: 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Ceramic bearings with air cooling - Full power available at approximately 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Clockwise rotation - Integrated tool changer interface - Liquid-cooled spindle - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System 12-position linear tool magazine - Mounted on the left side of the machine frame - Separate station for tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm 18-position disc tool magazine - Mounted on the gantry - Suitable for drilling tools and tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Drilling Aggregated Head DH18 6H 1S drilling head - 12 vertical spindles: 7 spindles in the X direction, 5 spindles in the Y direction - 4 horizontal spindles in the X direction - 2 horizontal spindles in the Y direction - Drilling stroke: 70 mm - Maximum drilling depth: 70 mm - Tool holder: 10 mm - Individual control of the spindles - Integrated slotting saw - Saw blade diameter: 120 mm - Maximum slotting saw blade thickness: 5 mm - Speed up to 7,500 rpm Vacuum and Clamping System Console Table - 6 consoles with front and rear stops - Wireless two-circuit vacuum system - Height of vacuum cups: 100 mm - Pneumatic console locking - Programmable pneumatic stops - 4 adjustable side stops - Reinforced support arms - Load-bearing capacity of the support arms: 40 kg each Vacuum Pump Capacity: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz - Additional vacuum connection for template machining - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air switching for all consoles WoodFlash Software Package Control Panel - Complete machine operation via the CNC panel - Program creation and editing - Tool and workpiece management - Manual machine commands - Monitoring of vacuum, compressed air and safety systems Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB connection Operator Device for Feed Rate - Manual feed override potentiometer - Variable feed rate adjustment during machining Safety Devices - CE safety system - Safety mats instead of light curtains - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Sensors to monitor vacuum and compressed air Optional Equipment - External release switch - Protected energy chain system - Additional locking for A and C axes - Saw blade changing station on the gantry - Operating hours: 6442 hrs.

Condition: used, Year of construction: 2017, operating hours: 9,370 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X-axis working area: 3000 mm - Y-axis working area: 1550 mm Fgodpozuw H Iefx Albsg - Z-axis clearance: 150 mm Main Spindle - 5-axis electric spindle - 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Speed range: 1,000 - 24,000 rpm - Ceramic bearings - Liquid-cooled spindle - Clockwise/counterclockwise rotation - Integrated tool changer interface - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System Linear Tool Changer - 12-position - Interface for tool holders - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm Disc Tool Changer - 18-position - Mounted on the traversing portal - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Circular Saw Blade Changer - Maximum saw blade diameter: 350 mm Drilling Unit DH18 6H 2S Drilling Head - 12 vertical spindles: 7 in the X-direction, 5 in the Y-direction - 6 horizontal spindles: 4 in the X-direction, 2 in the Y-direction - Drilling stroke: 70 mm - Maximum drill length: 70 mm - Tool holder diameter: 10 mm - Individual drive for each spindle Dadoing Saws - 2 dado saw blades: 1 in the X-axis, 1 in the Y-axis - Maximum saw blade diameter: 120 mm - Maximum saw blade thickness: 5 mm - Speed adjustable up to 6,000 rpm Vacuum and Clamping System Console Table - 6 consoles - Front and rear programmable stops - Wireless dual-circuit vacuum system - Height of vacuum suction cups: 100 mm - Pneumatic console locking - 4 adjustable side stops - Additional support arms Vacuum Pump Flow Rate: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz Additional Vacuum Equipment - Vacuum connection for template machining (left side) - Additional vacuum connection for template milling (right side) - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air control for all consoles WoodFlash Software Package Control Panel - Complete machine control - Loading and execution of programs - Tool and machining management - Sensor monitoring - Manual machine commands Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB port Handheld Control for Feedrate Control - Feedrate override - Emergency stop button - Manual feedrate adjustment during machining Safety Devices - CE safety system - Light curtain safety system - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Vacuum and compressed air sensors - Additional safety mat system Operating Hours: 9370 hours

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, battery capacity: 575 Ah, remaining battery capacity: 100 %, battery voltage: 24 V, total length: 827 mm, total width: 325 mm, total height: 630 mm, overall weight: 445 kg, Forklift battery 24V 5PzS575 – 100% TESTED BATTERY Year of manufacture: 2021 Weight approx. 435 kg Dimensions: 825 mm x 325 mm x 630 mm Battery serviced and tested by a professional company. Capacity test (C5 discharge test): 659/575 Ah Fsdpfsyu I D Ssx Albegg Remaining capacity: 100% With Aquamatik filling system (BFS) With terminal bolts but WITHOUT end discharge cable

Condition: like new (used), functionality: fully functional, Year of construction: 2022, battery capacity: 625 Ah, remaining battery capacity: 100 %, battery voltage: 24 V, total length: 825 mm, total width: 325 mm, total height: 630 mm, overall weight: 448 kg, Forklift battery 24V 5PzS625, battery 100% TESTED Year of manufacture: 2022 Weight approx. 448kg Dimensions: 825mm x 325mm x 630mm Battery serviced and tested by a specialized company Capacity test (C5 discharge test): 651/625 Ah battery Remaining capacity: 100% With Aquamatik filling system (BFS) Fsdpfx Ajy N T Dbjlbogg With pole screws but WITHOUT end discharge cable

Year of construction: 2016, condition: ready for operation (used), An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible. Fgedpoxrf Nljfx Albog

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 6413283, Year of construction: 2016, lifting height: 114,500 mm, fuel type: electric, mast type: triplex, power: 11 kW (14.96 HP), battery voltage: 48 V, battery weight: 1,920 kg, color: orange, Equipment: hydraulically sliding cabin, Up to 4 Toyota narrow aisle forklifts for sale. Having been sourced from a large industrial facility, these units are technically in a solid, well-maintained condition. All 4 forklifts have just received a fresh service. Technical details: Model: VCE150A Year of manufacture: 2016 Aisle width: 1,400-1,800 mm Rated capacity: 1,500 kg Own weight (without battery): 7,475 kg Battery voltage: 48 V Battery weight: min. 1,785 kg / max. 1,920 kg Maximum lift height: 11.45 meters Actual load capacity at max. height: 1,375 kg Load center: 620 mm System: Man-Up (operator is lifted with the load) Guidance: Equipped with inductive guidance system Special feature: Articulated chassis (bend steering) for minimal space requirement during aisle changes. Transport and loading can be organised Europe-wide for an additional fee, upon request. All prices are subject to VAT. Viewing possible by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale Fgjdsylixxjpfx Albjg PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell yours? For further information or contact options, visit our website.

Condition: good (used), Year of construction: 1995, Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from Rapid RVT 2500 electric forklift -Hydraulic pump: Hidroirma type UP100K163-01 -Motor: Efel 36808 24 V -with: tank and control valve -Dimensions: 210/170/H360 mm -Weight: 10.5 kg Fgodpfx Aei Dyvwolbeg

Condition: good (used), functionality: fully functional, Year of construction: 2019, fuel type: electric, Forklift battery 24V 6PzS690 battery 90% TESTED Year of construction: 2022 Weight approx. 500kg Dimensions 825mmx375mmx630mm Battery was serviced and tested by a specialist company. Capacity test (C5 discharge test) 617/690 Ah battery Fedpfxorqv I No Albegg Remaining capacity: 90% percent With Aquamatik filling system (BFS) With pole screws but WITHOUT end conductor

Condition: used, Year of construction: 2006, Milling machines Travel distance X: 500 mm Travel distance Y :450 mm Travel distance Z: 400 mm Number of axis: 5 milling machine / machining center Control: Heidenhain iTNC 530 table size X: 500 mm Fsdpfx Alezwqvhebogg table size Y: 380 mm tool changer: 30 - time control Heidenhain Machining center - Universal Rotary table (B / C axis) Swivel milling head (B axis) HSK63 tool holder Cooling unit Rotary table: C-axis +/-360°, B-axis 108° Max. table load: approx. 500 kg Speed range - main spindle: 20 - 18,000 rpm Feed rates: 20 - 50,000 mm/min Machine weight approx.: 6.0 tons Machine dimensions approx.: 3.8 x 3.2 x 2.5 meters

Condition: excellent (used), Year of construction: 2010, Technical Data Vertical cutting height: 2,200 mm Horizontal cutting height: 2,080 mm Fgsdpjud Sk Sefx Albog Extraction port: 2 x 100 mm Width: 1,700 mm Height: 3,000 mm Length: 6,570 mm Motor power: 7.5 HP (5.5 kW) Motor voltage: 3 x 400 V Saw blade diameter: 300 mm Cutting length: 5,300 mm Cutting depth: 80 mm Digital display for horizontal and vertical cuts Year of manufacture: 2010 Net price: 11,190

Condition: used, Year of construction: 2024, Optimum Optisaw SD500AV – Vario Bandsaw with Siemens Inverter Used bandsaw with signs of wear Heavy-duty industrial design Smooth, low-noise operation Manual or semi-automatic operation Infinitely variable saw band speed from 20–80 m/min High cutting precision due to vibration-free running Mitre adjustment from -45° to 60° by swivelling the entire saw bow Supplied as standard with high-quality bi-metal saw blade Microswitch for automatic shut-off Coolant pump Ball bearing saw band guide with carbide inserts for optimal cutting results Easy setting of descent speed via feed rate control valve on the control panel Large, hydraulically operated quick-action vise, self-closing, laterally adjustable Manometer for correct saw band tension Clearly arranged control panel Semi-automatic operation functionality: Closing of the vise and activation of the motor Lowering of the saw bow for cutting Stopping of the motor and return of the saw bow to its home position Dimensions and weights Length approx.: 2129 mm Width/depth approx.: 1046 mm Height approx.: 1687 mm Weight approx.: 645 kg Fgodpfx Aox Dzv Eslbjg Electrical data Output (motor power): 3 kW Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 0.1 kW Total connected load: 3.8 kW Supply voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 20–80 m/min Saw band length: 3770 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Cutting angle range: -45 to 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Continuous real-time data acquisition: Yes Data storage location: On device Data access: Via wireless interface Cutting capacities 0° round (solid): 355 mm 0° square (solid): 300 mm 0° rectangle upright (solid): 300 x 490 mm -45° round (solid): 290 mm -45° square (solid): 250 mm -45° rectangle upright (solid): 250 x 250 mm +45° round (solid): 350 mm +45° square (solid): 290 mm +45° rectangle upright (solid): 290 x 340 mm +60° round (solid): 230 mm +60° square (solid): 180 mm +60° rectangle upright (solid): 180 x 220 mm Explanation cutting capacity: Cutting capacity determined with aluminum based on saw bow weight. May vary when processing different materials and may be smaller in certain cases (this is not cutting capacity in the strict sense).

Condition: used, Year of construction: 2006, Charger Fgedpfxey Up Ume Albeg

Condition: used, Year of construction: 2001, functionality: unexamined, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, total height: 2,500 mm, total length: 2,200 mm, total width: 2,400 mm, table length: 760 mm, table width: 510 mm, table load: 1,000 kg, For sale is a 3-axis CNC milling machine from the Hurco brand and the type VMX 24 Technical data: - Year of manufacture: 2001 - Control: Winmax 4 - X axis: 610.0 mm - Y axis: 510.0 mm - Z axis: 610.0 mm - Table length: 760.0 mm - Table width: 510.0 mm - Max. part weight: 1000.0 kg - Length: 2200.0 mm - Width: 2400.0 mm Fgodpfsv Tcfksx Albsg - Height: 2500.0 mm - Weight: 4700.0 kg - Number of tool pockets: 24.0 Pull bolts, which can be seen in pictures, are not part of the offer Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase/sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: good (used), functionality: fully functional, Year of construction: 2018, fuel type: electric, battery manufacturer: Stuba, battery model: 24v 3PzB225, battery capacity: 225 Ah, remaining battery capacity: 79 %, battery voltage: 24 V, battery weight: 193 kg, total height: 580 mm, total length: 560 mm, total width: 230 mm, Forklift battery 24V 3PzB225, battery 79% TESTED Year of manufacture: 2018 Weight: 193 kg Dimensions: 560mm x 230mm x 585mm Battery has been serviced and tested by a specialist company. Capacity test (C5 discharge test): 177/225 Ah battery Fodpfx Aloyu Nq Hebjgg Remaining capacity: 79 percent With Aquamatik filling system (BFS) With terminal bolts but WITHOUT end discharge cable

Condition: used, Ladegerät - Charger for forklift Jungheinrich E 220 G 24/65 B-ET-DA Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Fjdpoh Axztefx Albsgg On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1998, condition: used, Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS Fsdpfx Aljb Umtksbjgg

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 14,832 h, load capacity: 5,000 kg, lifting height: 4,100 mm, free lift: 1,460 mm, fuel type: gas, mast type: triplex, construction height: 2,210 mm, fork carriage width: 1,460 mm, fork length: 1,200 mm, empty load weight: 7,960 kg, total length: 3,360 mm, drive type: Treibgas, construction width: 1,400 mm, LPG forklift Load center of gravity: 600 Fork width: 150 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 3.00-15 Rear tires Type: Superelastik Rear tires size: 28x9-15 Description: In addition to this Yale model, we also have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this GLP50VX P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Sideshift, full free lift, Fjdpfx Alsu Dz E Uebegg

Condition: used, CNC Press Brake COLLY 502/A Numerical Command: CYBELEC type DNC 32 P-CM Capacity: Maxi length 2000 mm x 50 T Throat depth: 200 mm Distance between uprights: 1600 mm Back Gear Gauge 1 axe Defective cylinder Right cylinder joint to change Machine functional (only right cylinder joint to change) Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Weight: approx 4 T Fgjdozwcl Ujpfx Albog

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,500 h, Circular Metal Saw manufactured in 2017. This Imet VELOX 350 AF-ENC features a saw blade diameter of Ø350 mm and a spindle speed of 3600 rpm. It includes an electronic feed control for programming length and quantity, along with an extraction system and a roller conveyor for 6m profiles. If you are looking to get high-quality cutting capabilities, consider the Imet VELOX 350 AF-ENC machine we have for sale. Contact us for further details. Fsdpoyxpcrofx Albjgg • Feed stroke (X-axis): 520 mm (multi-stroke capable) • Saw blade diameter: Ø350 mm • Blade bore: 22 mm • Spindle speed: 3600 rpm • Control: ENC (Electronic Feed Control) for programming length and quantity • Operating hours: 5,500 Additional equipment • Extraction system • Roller conveyor for 6 m profiles