Used Casing In Line for sale (22,705)

Year of construction: 2007, condition: good (used), functionality: fully functional, For sale: complete Farmet two-stage cold oil pressing line for rapeseed and sunflower seed. Manufacturer: Farmet Main equipment: FS1000 pre-press + FS1000 final press Pre-press motor: 55 kW Final press motor: 45 kW Filtration: automatic oil filtration system, approx. 10 m² Capacity: up to approx. 1,400 kg/h depending on seed quality, moisture, temperature and operating setup Daily capacity: up to approx. 32 t/24 h Condition: used, fully functional Location: Slovakia, EU The line is designed for double cold pressing of high-oil seeds such as rapeseed and sunflower seed. Included: Farmet FS1000 pre-press Farmet FS1000 final press Automatic oil filtration system, approx. 10 m² Oil piping / connection equipment as shown in the photos Electrical and control components as shown in the photos The two-stage pressing process allows higher oil recovery from high-oil seeds while keeping the process natural and energy-efficient. The filtered oil can be stored after removal of cake residues and solid particles. Suitable for: rapeseed oil production sunflower oil production cold pressed oil production organic / non-GMO oilseed processing small and medium oil mills feed cake production The line is available for inspection in Slovakia. Sold as shown in the photos. Loading possible. Price: FCA Slovakia, plus VAT. Zu verkaufen: komplette Farmet Zwei-Stufen-Kaltpresslinie für Raps und Sonnenblumenkerne. Hersteller: Farmet Hauptausstattung: FS1000 Vorpresse + FS1000 Endpresse Motor Vorpresse: 55 kW Motor Endpresse: 45 kW Filtration: automatische Ölfiltration, ca. 10 m² Kapazität: bis ca. 1.400 kg/h, abhängig von Saatqualität, Feuchte, Temperatur und Einstellung Tagesleistung: bis ca. 32 t/24 h Zustand: gebraucht, voll funktionsfähig Hjdpfexuafyjx Amyer Standort: Slowakei, EU Die Linie ist für die doppelte Kaltpressung ölreicher Saaten wie Raps und Sonnenblumenkerne ausgelegt. Enthalten: Farmet FS1000 Vorpresse Farmet FS1000 Endpresse Automatische Ölfiltration, ca. 10 m² Rohrleitungen / Verbindungsteile wie auf den Fotos Elektrische und steuerungstechnische Komponenten wie auf den Fotos Das zweistufige Pressverfahren ermöglicht eine höhere Ölausbeute bei ölreichen Saaten und bleibt gleichzeitig ein natürlicher und energieeffizienter Prozess. Geeignet für: Rapsölproduktion Sonnenblumenölproduktion kaltgepresste Öle Bio- / Non-GMO-Ölsaatenverarbeitung kleine und mittlere Ölmühlen Presskuchenproduktion für Futtermittel Besichtigung in der Slowakei möglich. Verkauf wie auf den Fotos.

Condition: new, mileage: 20 km, fuel type: diesel, gearing type: automatic, first registration: 05/2026, emission class: euro6, color: other, brakes: retarder, number of seats: 24, Year of construction: 2026, Equipment: ABS, air conditioning, = Additional Options and Accessories = - Driver’s air conditioning - Air conditioning system - USB connections - Webasto auxiliary heater = Further Information = Height: 100 cm Damage: None = Company Information = Hodjy N Ud Aopfx Amysr We are an international company based in Belgium, located approximately 20 km from Brussels. Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, offering a large car park that serves as a display area. We always have a wide selection of buses from all brands, with various capacities, models, and price categories in stock. We can find the right coach, school, or city bus to suit your needs and budget. All information provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Viewing times for used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mówimy po polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: new, mileage: 20 km, fuel type: diesel, gearing type: automatic, first registration: 05/2026, emission class: euro6, color: other, brakes: retarder, number of seats: 24, Year of construction: 2026, Equipment: ABS, air conditioning, = Additional Options and Accessories = - Driver’s air conditioning - Air conditioning system - USB connections - Webasto auxiliary heater = Further Information = Height: 100 cm Damage: None = Company Information = Hjdpfxjy N Utwe Amyjr We are an international company based in Belgium, located approximately 20 km from Brussels. Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, offering a large car park that serves as a display area. We always have a wide selection of buses from all brands, with various capacities, models, and price categories in stock. We can find the right coach, school, or city bus to suit your needs and budget. All information provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Viewing times for used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mówimy po polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: new, mileage: 1 km, fuel type: diesel, gearing type: automatic, first registration: 03/2026, emission class: euro6, color: other, brakes: retarder, number of seats: 24, Year of construction: 2026, Equipment: ABS, air conditioning, = Additional Options and Accessories = - Airco Driver - Air Conditioning = Additional Information = Height: 100 cm Damage: None = Company Information = Hedjyrn Ncepfx Amyjr We are an international company based in Belgium, near Brussels (+/- 20 km). Belgian Bus Sales is your ideal partner for buying and selling used buses and has an extensive parking lot that serves as a showroom. We always have numerous buses of all makes, capacities, models, and price levels in stock. We can find the right tourist, school, or regular bus for you that meets your needs and budget. All information is provided without guarantee. Errors, prior sale, and typos excepted. Opening times for viewing the used buses: Mon.-Fri.: 8:30 a.m. - 12:00 p.m., 12:30 p.m. - 5:00 p.m.

Condition: used, Year of construction: 2006, Overview  This complete filling line was manufactured in 2005 by German company Breitner Abfüllanlagen GmbH. The line is designed for mayonnaise, dressing and ketchup in glass and PEHD bottles with diameters up to 110 mm. It is reported to be in good condition. Information about the reason for sale and exact availability was not provided. Technical data - Capacity: - 212 ml round plastic: up to 2,700 bph - 250 ml oval plastic: up to 2,700 bph - 1,000 ml round plastic: up to 900 bph - 1,000 ml oval plastic: up to 900 bph - Application: - Glass & PEHD (plastic) - Neck finish: - Screw-on caps Ø 30–40 mm Hodpjyighijfx Amyjr - Twist-off caps - Formats: - 212 ml, 250 ml, 1,000 ml Scope of Delivery  - Inductive Linear Filling Machine | Breitner | IDL 2047 | 2006 | 15–45 b/min - Conveyor | Breitner | TP 6052 | 2006 | — - Capping Machine | Breitner | VS 5012-S | 2006 | Up to 60 b/min - Rotary Sorter | Breitner | DS 8003 | 2006 | — - Feeder | Breitner | SFB 8001 | 2006 | — - Conveyor | Breitner | TPK 6042 | 2006 | — - Labeller | Breitner | EM 4322 | 2006 | Up to 70 b/min - Conveyor | Breitner | TPE 6032 | 2006 | —

Condition: new, mileage: 2,628 km, power: 309 kW (420.12 HP), first registration: 06/2026, fuel type: diesel, empty load weight: 13,355 kg, tire size: 315/80R22.5, axle configuration: 6x4, next inspection (TÜV): 06/2027, fuel: diesel, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6e, suspension: steel, number of seats: 2, total length: 7,650 mm, total width: 2,550 mm, total height: 3,190 mm, loading space length: 4,800 mm, loading space width: 2,410 mm, loading space height: 900 mm, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, air conditioning, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, retarder, seat heater, tachograph, tire pressure monitoring, trailer coupling, truck registration, F - LINE 6X4 KH TIPPER Retarder, LED headlights, aluminum wheels, trailer package, technology package 3 Body description: Length (internal): approx. 4900 mm Width (internal): approx. 2410 mm (pallet width) Side panel height: 900 mm Front panel: approx. 1000 mm (subject to agreement) Subframe: fully tubular, with safety cable, with repair supports, front and rear tipping bearings from Leidinger, secured against accidental reversal Floor: 6 mm Hardox 450 steel Side walls: 4 mm Hardox 450 steel, M-JET design Left: hydraulically folding HYDROBOARD, 2 cylinders under the tipping floor Right: pivoting and folding, manually locked, with spring relief on the front panel Front panel: 4 mm S 700 steel, with short slope/chute Rear panel: 4 mm Hardox 450 steel, pivoting, opens automatically during the tipping process, with rear chute and dosing device (locking with pin) Stanchions: corner stanchions in a stable, fixed design (BORDMATIK) HYDRAULICS: • chromed tipping cylinders with pneumatic shut-off, manufactured by HYVA • main valve (control block) • pneumatic tipping actuator for the cab • with oil tank • with piston pump Hodpfx Amozk H Rzjyor • with by-pass valve (due to auxiliary drive on the engine) • tipping trailer hydraulics: 2x pressure and 2x return line • with pneumatic changeover valve for tipper - trailer in the frame Additional equipment: • continuous aluminum mudguards for the 2nd and 3rd axles • tie-down points in the floor, 2 pairs of 8000 daN in the corners, with 4 pairs of folding tie-down points of 2000 daN in between, 1 pair on the front panel • underrun protection, folding, from KH, with spring relief • net hooks • broom and shovel under the floor • tie-down rods in the top rail of the side panels • contour marking Painting: • subframe bead-blasted, primed, and painted in chassis color • tipping body bead-blasted, primed, and painted in cab color

Condition: used, functionality: fully functional, Year of construction: 2011, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Jorns, controller model: CNC800, working width: 14,400 mm, throat depth: 1,000 mm, bending angle (max.): 144 °, bending radius (max.): 2 mm, bending radius (min.): 2 mm, type of crowning: manual, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge travel distance Z-axis: 980 mm, overall weight: 16,000 kg, total length: 15,260 mm, total width: 2,775 mm, total height: 2,003 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: AC, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Jorns AG is neither the owner nor the possessor of the machine. The machine is being offered for sale on behalf of the customer (based in Sweden). If you are interested, the owner’s contact information will be provided. Please find below some technical parameters of the machine: Type: SUPER-LINE-300S-1000-RH-SO-OV-CNC800-14.4-SHS-SPEZ Serial number: K11005 Year of manufacture: 2011 Insertion depth: 1000 mm Working length: 14,400 mm Bending capacity: 3 mm mild steel, 4 mm aluminum, 2 mm stainless steel Number of clamping arms: 18 units Number of linkages: 18 units, type 28 Number of bending cylinders: 18 units Hodpfozk Dfpsx Amysr Number of clamping cylinders: 18 units Base construction: The machine is built from two pieces Control: CNC800 Backstop: Parallel backstop, type 91, built from two pieces, including six backstop fingers. Crowning: Manual crowning at every arm except the first and last Hydraulic system: Equipped with an axial piston pump, 130 l/min, 22 kW engine, max. 250 bar Condition of the machine Accuracy: The machine is in daily use and can be tested at the customer's site in Sweden. In its current condition, the machine achieves 90° +/- 2° bending results in 3 mm mild steel at full length using manual crowning. To increase the bending accuracy, all linkages would need to be replaced. The machine has the following defects: - The touch screen is defective. The machine is currently operated using a mouse. - The upper clamping tool has a dent that could be repaired on site by a Jorns technician. Service Jorns: We are happy to provide a quotation for new linkages, a new panel and support in installing the machine in another location.

Condition: good (used), Precision balance, spring balance, tension force gauge -Manufacturer: Pesola, precision spring balance type Macro-Line 80196 -Measuring range: 200 Newton -Division: 2 N Hedpor H Nlljfx Amyer -Dimensions: 400/40/H40 mm -Weight: 0.5 kg

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational. Hsdpfx Amoy Hlvwsysr

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, REF: MM6413 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Hsdpsy Hlkbofx Amyor Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Not operational, out of action 3-4 months.

Condition: used, Automatic lattice girder welding line TE 30 S made by EUROLLS Model : TE 30 S Maximum stacking height : 500 mm Wire diameter - Upper current (ds -smooth or barbed) : From 4 to 12 mm - Lower current (di- smooth or barbed) : From 4 to 12 mm - Diagonal wire (dg- smooth or barbed) : From 3 to 8 mm Diagonal pitch (P) : 200 mm Hsdpovtqacjfx Amyjr Beam pitch : 400 mm Maximum speed with hot and cold drawn wire : Max 30 m/min Maximum spool weight in feed : 3000 kg Machine type: TE 30 S Maximum stacking height: 500 mm Wire diameter Upper current (ds -smooth or barbed): From 4 to 12 mm Wire diameter Lower current (di- smooth or barbed): From 4 to 12 mm Wire diameter Diagonal wire (dg- smooth or barbed): From 3 to 8 mm Diagonal pitch (P): 200 mm Beam pitch: 400 mm Maximum speed with hot and cold drawn wire: Max 30 m/min Maximum spool weight in feed: 3000 kg

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 Hsdpfx Aowu Tu Djmyor 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: refurbished (used), Year of construction: 2025, JAGER welded mesh line U-Gsa-st Full revamped "as new" Technical data 24 pay off for longitudinal wire spools, longitudinal wire straightening equipment Line wire pull off system Longitudinal wire loop Hsdowu Dcxopfx Amysr Longitudinal wire straightening equipment Cross wire magazine Number of installer line wires : 24 up to 10 mm Diameter of lines wires : 4 to 10mm Diameter of cross wires : 4 to 10mm Separation between line wires : 100, 150, 200, and 300 mm Separation between cross wires : min 30 mm , steplessly programmable Max. length of cross wire (mesh width) 2500 mm , max welding width : 2400 mm Mesh length : min 3000 mm and max . 6000 mm Trafos : 8 x 160 Kva Number of installer line wires: Number of installer line wires : 24 up to 10 mm Diameter of lines wires: 4 to 10mm Diameter of cross wires: 4 to 10mm Separation between line wires: 100, 150, 200, and 300 mm Separation between cross wires: min 30 mm , steplessly programmable Max. length of cross wire (mesh width): 2500 mm Max welding width: 2400 mm Mesh length: 3000 - 6000 mm Trafos: 8 x 160 Kva

Condition: used, Year of construction: 2016, operating hours: 2,000 h, functionality: fully functional, Panel Laminating Line for AKRYL, PET, PVC, HPL, CPL MASTER PUR-1400 Professional line for single-sided laminating of panels using PUR hot melt adhesive. Application: The machine is designed for laminating: MDF particleboard plywood PVC boards gypsum boards other wood-based materials Supported finishing materials: AKRYL PVC HPL PET CPL decorative paper Technical specifications: Working width: 1400 mm Maximum panel size: 2800 × 1300 mm Panel thickness: 2–40 mm Operating speed: 5–17 m/min Output: 3–5 pieces/min Maximum output: approx. 1200 pieces/8 h Drive power: 21.49 Kw Heating power: 51.7 Kw Line dimensions: approx. 16 × 2.5 × 2 m Required floor space: min. 6 × 22 m Line equipment: feeder with roller conveyor brushing machine for cleaning panels IR oven for preheating the material 3-roller PUR adhesive applicator foil feeding station roller nip press receiving conveyor 208-liter PUR adhesive melting tank Advantages: high surface quality Hsdpfx Aozkmqbomyer even adhesive application possibility of laminating high-gloss films low adhesive consumption stable operation in serial production

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 99U0686, YEAR OF MANUFACTURE: 11-2019 FEATURES: - BENDING FORCE: 30 TONS - USEFUL LENGTH: 1600 MM - DISTANCE BETWEEN UPRIGHTS: 1200 MM - STROKE: 100 MM - MAXIMUM OPENING: 330 MM - THROAT: 250 MM - TABLE WIDTH: 190 MM - CONTROLLED AXES: 4 Hjdjzb Ekvjpfx Amyor - REAR STOPS: 2 - CNC CONTROL - SAFETY LIGHT CURTAINS

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, REF: MM6419 1 x Carnitech twin-lane pin-bone removing and packing line. This machine is designed for removing pin-bones ensure a high product quality and helps to achieve a maximum yield at shorter time. Head end first and skin side down, the salmon fillets are conveyed to the pin-bone head on a pvc belt. Carnitech pin-bone removers treat the fillets very gently. This system is suitable for processing both salmon and trout. Manufacturer - Carnitech A/S. Type - CT 2612. Hedpfx Amjy Swi Hsyjr Pin-Boner Date of manufacture - 2000 (refurbished approx 2 years ago). Packing Line Date of manufacture - 2023/24. Capacity / Output - up to 36 fillets / minute (was only being run at 10 fillers / minute). Size of fillet - between 0.5 kg up to 4 kg. Video available on request.

Year of construction: 2014, condition: refurbished (used), High-performance 40 Ton Triple tube drawing bench BÜLTMANN GKZ 400/3-16 Complete 40 tn triple tube drawing line, revamped by Bültmann in 2014. Includes extensive set of tooling and large spare parts package. This BULTMANN GKZ 400/3-16 Triple tube drawing line combines a robust 40-ton drawing capacity with significant upgrades completed in 2014, including a Siemens S7-400 PLC conversion, renewed machine bed, rebuilt puller, and upgraded drawing carriage. The line is available immediately and is suitable for demanding tube production applications. TECHNICAL SPECIFICATIONS · Manufacturer: BÜLTMANN · Model: GKZ 400/3-16 Triple · Major overhaul: 2014 - Control cabinet overhauled - PLC converted to Siemens S7-400 - New Siemens drives - Machine bed renewed - Drawing carriage converted (wheels, damping, etc.) - New chain - Puller rebuilt · Material strength: 500 N/mm² · Input tube length: 2.5–12 m · Exit tube length: 3–16 m · Maximum drawing force: 400 kN (40 tons) · Maximum drawing speed: 80 m/min · Return speed: 120 m/min · Main motor power: 300 kW · Hydraulic power unit: 30 kW · Auxiliary drives: 7.5 kW · Tube diameter range*: 20–65 mm · Wall thickness range: 1–5 mm * Tube range produced by the previous owner. Tooling is available for this range and should be verified onsite. SCOPE OF SUPPLY - Complete drawing bench according to layout - Renewed machine bed - Upgraded drawing carriage - New chain - Rebuilt puller - Electrical system with Siemens S7-400 PLC and Siemens drives - Hydraulic system - Existing safety barriers - Large set of tooling (to be verified onsite) - Comprehensive spare parts package (to be verified onsite) - Documentation in digital and paper format Hedpezkf I Eefx Amyor BENEFITS ✓ High-capacity 40-ton drawing force for demanding tube production ✓ Modernized Siemens automation for improved reliability and maintenance ✓ Major mechanical refurbishment completed by BÜLTMANN ✓ Includes tooling, spare parts package, and documentation ✓ Immediate availability for rapid installation COMMERCIAL INFORMATION - Machine status: Dismantled - Video of the line in operation available - Delivery: Immediate | As is, where is Material strength: 500 N/mm² Input tube length: 2.5–12 m Exit tube length: 3–16 m Maximum drawing force: 400 kN (40 tons) Maximum drawing speed: 80 m/min Return speed: 120 m/min Main motor power: 300 kW Hydraulic power unit: 30 kW Auxiliary drives: 7.5 kW Tube diameter range*: 20–65 mm (*Produced by previous owner. Tooling available for that range. To be checked onsite) Wall thickness range: 1–5 mm

Condition: used, No. 3280 Complete painting line / water-wash spray booths Used, system still completely assembled, from a furniture manufacturing company Large complete painting line, consisting of various water-wash spray booths, spraying equipment, extensive roller conveyor system as well as fresh air and exhaust air ducting Several water-wash spray booths / spray walls Spray booths partly designed as 3-sided booths Turntable available Various spraying units / pumps available Extensive roller conveyors for workpiece transport Hsdpjzhblnsfx Amysr Fresh air supply / air technology available Exhaust air ducts / extraction system available Lighting above the spray booths available Dimensions of the spray booths approx. 3000 x 2000 mm / 2000 x 2000 mm / 2500 x 2000 mm Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: used, MEP Syntax Line 25 Automatic Rebar Processing Center, Used Machine Manufacturer MEP S.p.A. (Made in Italy) Model Syntax Line 25 Machine Functions Automatic straightening from coil Hydraulic cutting CNC-controlled bi-directional bending Processing Capacity (Rebar from Coil) Single-wire operation: Ø8 mm to Ø25 mm Double-wire operation: Simultaneous processing of 2 bars from Ø8 mm to Ø16 mm Material Storage Storage capacity: Up to 14 m³ Manual loading Hodezg Uv Dopfx Amyjr Collection tray: 12 × 2.5 m Overall Dimensions Width: 17,400 mm Depth: 2,400 mm Height: 1,600 mm Condition The built-in monitor is not operational. The machine is equipped with a video output, allowing an external monitor to be connected for operation.

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Hedpjyh Hc Rsfx Amysr

Condition: used, mileage: 21,010 km, power: 100 kW (135.96 HP), first registration: 05/2025, fuel type: diesel, overall weight: 3,225 kg, color: blue, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,050 mm, total width: 2,032 mm, total height: 2,001 mm, loading space length: 2,602 mm, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 0861. SM05105 ----EQUIPMENT * Airbag (passenger side) * Trailer hitch, fixed * Roof rack - integrated and foldable * LED headlights - LED high beams - LED low beams - LED daytime running lights including integrated LED turn signals in the front - Cornering lights, static - High beam assistant * Paint: Metallic * SVO: Service-Line Lite package, Sortimo shelving system for L1 wheelbase, driver's side: 6 shelves, 6 Sortimo storage boxes, 2 floor covers, SoboGrip mounting floor including labeling tags, high side wall paneling * Sliding door, right and left * 2-stage unlocking for passenger compartment and cargo area. Prevents locking of open doors. * Anti-lock braking system with electronic brake-force distribution (EBD) * Airbag driver side * Exterior mirrors, electrically adjustable and heated * Exterior mirror housings made of plastic, black-gray * Battery: H7 AGM single battery * Roof, flat * Roof console * Double-wing tailgate (without window), unlockable from 90° to 168° * Tachometer * Third brake light * Electronic Stability Program (ESP) - Hill start assist - Emergency brake assist (EBA) - Traction control (TCS) * Power windows, front, electrically operated - with quick-up/-down function for the driver's side * Parking brake, electronic * Windshield, heated * Transmission: 8-speed automatic * Grab handle, driver's and passenger side * Glove compartment with lockable lid * Interior lighting, front * Automatic climate control * Headrests, front (3) * Fuel tank 55 l * Cargo area lighting (LED) * Steering wheel: Plastic steering wheel * Center console, small * Emergency call assistant eCall emergency call system to send an emergency call in the event of an accident or manual activation * Technology package 2 (Trend) - Ford audio system with 13 speakers and Ford SYNC 4 - Pre-Collision Assist, camera-based - Driver drowsiness alert - Traffic sign recognition system - Wrong-way driver warning - Lane keeping assist including lane departure warning - Park pilot system, front and rear - Cruise control - Intelligent speed limiter with speed limit display - Rear view camera * Particulate filter: Diesel particulate filter * Radio accessories: 4 speakers * Tire pressure monitoring system (TPMS) * Gear selector on the steering column * Windshield wipers with rain sensor * Headlights with LED low beams - including high beam assistant * Sliding door, rear, right * Mud flaps, rear * Mud flaps, front Hedpjzg R Rwsfx Amyjr * Power steering * Seat belts - Seat belt pretensioners and force limiters, front - Driver's seat belt warning system * Seat package 11A - Driver's seat, 4-way manually adjustable - Front passenger double seat with folding center seat, fixed - Lumbar support for driver - Fabric upholstery Plus Style, seat center in Black Onyx, rest in Ebony * Start-stop system * Ford Power Start function (keyless start) * Bumpers, front and rear, partially painted in vehicle color * Partition (metal) without window * Door handles made of plastic, black-gray * Auxiliary heater * Tie-down points 6 * Immobilizer * Heat-absorbing glass, light tint, all around * Central locking with remote control ... and more ----The vehicle is in original condition! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly take your vehicle in part exchange. Financing/leasing also possible without a down payment! Do you have any further questions?

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker Hodpexb U Txofx Amyor 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Condition: excellent (used), Year of construction: 2011, Thomas Pettersson (Sweden). Fully automatic compact high speed planing line 150m/min !!! High performance handling system suitable for use with a moulder, double end tenoner etc. consisting of the following. 1. Pack infeed system, roller and chain conveyors, 5m + 3,8m. 2. Robot layer feeder (4 layers per minute) with automatic stick collector. 3. Crossfeed system with end trimmer saws (angle adjustable), 22 cycles 400mm wide per minute.. 4. Moulder infeed (right side with adjustable fence line) with 4 feed roller accelerator 150m/min maximum speed, 5. Infeed belt with side pressure to fence. 6. Outfeed belt 5m long. 7. Board sweeper to stacker capable of stacking 80pcs/min. 8. Automatic stacker with stick magazines, 1200mm high packs, 9. Magazine for automatic loading of pallets to outfeed, holding 10 pallets. 10. Outfeed roller conveyor, 5m long.. 11. Control system with remote panels. This high speed fully automatic line could be used for feeding a moulder, resaw, multi-rip etc. It could be modified to suit feeding a double end tenorer etc also. If you need a highly efficient, compact, labour saving handling system for lengths up to 2.1m then this could be the equipment for you. Very suitable for doors, windows, furniture, specialist packaging etc. Inspection is very welcome. Hjdpfx Amoth Taajyer

Year of construction: 2026, condition: new, functionality: fully functional, total length: 680 mm, total width: 600 mm, total height: 820 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 08/2027, type of input current: three-phase, warranty duration: 12 months, machine/vehicle number: 2026, Dishwasher Model: S-Line 3500 + 3-stage filter system Euronorm 500 3 liters of fresh water consumption Display control 6 washing programs 2 special (extra fresh water and endless loop) peristaltic rinse aid and detergent dosing pump extra deep interior for sheets / tubs 600 x 400 mm DGUV V3 checked Drain / drain pump electronically Connection: 400 V, 6.7 kW, 16A-CEE plug Dimensions: 600 x 680 x 820 mm, WxDxH with warranty Included accessories: 1 plate basket 1 universal basket 1 cutlery basket Inlet and outlet hoses Hodpfx Amjfffhyjyjr

Condition: like new (used), functionality: fully functional, Sheet Metal Perforating Line – For Sale Hjdpfx Amjzix Ateysr Complete sheet metal perforating line manufactured by Sacform, suitable for perforating sheet metal and coils up to 1,200 mm wide. The line includes: Decoiler Feeder Perforating press - 1,200 mm width 2 punching dies: Die 1: 3×300 (2 mm hole diameter) Die 2: 1×1,200 (3 mm hole diameter) Pull-through cutting table Recoiler