Used Buffalo Machinery Micromill Challenger Mm-430 for sale (104,931)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Hsdpfx Aemhh Dhei Nonk Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) Hedpfemhh Dzsx Ai Nenk - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Hnodpfxsmhhx Ij Ai Nok We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Hnjdpfx Aemhhyaoi Nek When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Hnsdpsh Ek Daefx Ai Nok - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports. Hnedpsmhh Anefx Ai Nok

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany Hodomhhf Sspfx Ai Nenk - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Hnodpfxsmhhl Hj Ai Nok Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Hsdpfx Asmidyfei Nonk Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard Hsdjmkixwspfx Ai Nonk = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) Hedemhh Dtjpfx Ai Nenk - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 5,329 h, motor manufacturer: AGCO POWER, gearing type: hydrostat, fuel type: diesel, Equipment: additional headlights, air conditioning, cabin, front power take-off, hydraulics, lighting, power shift gear, trailer coupling, yield monitor with GPS, Authorized SUBARU dealer offers an agricultural tractor in Sweden, awaiting its new owner! This is a proven machine in excellent technical condition, coming from a reputable and legal source. We offer comprehensive service – we handle import, transport, and all formalities so that you can enjoy a stress-free purchase. This is an excellent opportunity to acquire reliable equipment at an attractive price. Similar machines on the used market are priced between €100,000 and €160,000! The price includes a complete set of registration documents. We offer all forms of payment: Leasing, credit, cash, and bank transfer. With either cash or bank transfer payment, you can drive the vehicle away immediately from our dealership. Additionally, we provide insurance services – we will calculate the cheapest premium for any vehicle – TRY US! We also deliver paid vehicles and trucks directly to a specified address anywhere in Europe. For more information about our services, please contact our sales representatives. Exceptional Challenger MT775E tracked tractor from 2015. This machine boasts an impressive 400 HP, designed for the most demanding fieldwork. Maintained in excellent technical and visual condition—ready to work without any additional investment required. Basic data: Brand and model: Challenger MT775E Year of manufacture: 2015 Operating hours: 5,329 hours Engine power: 400 HP Drive: Mobil-Trac tracked drive Technical condition: perfect – as new Number of owners: 1 History: accident-free, regularly serviced Technical Specification Engine Manufacturer: AGCO Power Displacement: 9.8 l Number of cylinders: 7 Maximum power: 400 HP (298 kW) Boosted power: approx. 431 HP Torque: 1,921 Nm at 1,500 rpm Emission standard: Tier IV (SCR) Drive and transmission Transmission: Full Powershift 16/4 Maximum speed: 40 km/h Steering: electrohydraulic Hnjdpfxjyz A Nqo Ai Nsk Hydraulics Pump capacity: approx. 220 l/min Number of hydraulic outlets: 4–6 Operating pressure: approx. 200 bar Rear linkage and PTO Rear three-point hitch (TPH): cat. III/IV Lifting capacity: approx. 7,200 kg PTO: 1,000 rpm Dimensions and capacities Operating weight: approx. 13.6 t Track width: up to 860 mm Fuel tank: approx. 650 l AdBlue tank: approx. 87 l Machine advantages: - Enormous tractive power – ideal for heavy fieldwork - Low soil compaction due to tracked drive - Excellent traction in difficult conditions - Proven and reliable AGCO Power engine - Comfortable and efficient operation on large areas Ideal for working with: - 8–12 m cultivation units - large multi-furrow ploughs - subsoilers and large-area seeders. The listed price is net and applies for export or business clients. We invite you to contact us directly by phone to get your best price :) _____ After price negotiations, for interested clients, we can record detailed videos or provide computer diagnostics or paint thickness measurements to enable a safe remote purchase. _____ Of course, we always encourage onsite inspection, but if this is not possible, remote purchase is available, ensuring a secure transaction.

Condition: like new (used), Year of construction: 2020, functionality: limited functionality, operating hours: 50 h, power: 50 kW (67.98 HP), input voltage: 380 V, input current: 80 A, input frequency: 60 Hz, type of input current: three-phase, cutting height (max.): 72 mm, saw blade diameter: 380 mm, height adjustment type: pneumatic, actuation type: electric, total length: 7,500 mm, total width: 6,000 mm, total height: 1,900 mm, overall weight: 5,000 kg, table height: 1,000 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, AES Alpha Heavy Duty Beam Saw 3200 * 3800 mm | Showroom Condition | Less 100 Hours Category: Panel Saw / Beam Saw Condition: Used – Like new showroom machine Description: For sale: AES Alpha heavy duty beam saw. The machine has been used exclusively in a showroom for demonstrations and training. It is in working condition with less than 100 working hours. Equipped with all Yaskawa and Schneider Electric drivers. Technical Data: Cutting width: 3200 mm Bridge depth: 3800 mm Main motor: 15 kW (20 HP) Scoring motor: 2.2 kW (3 HP) Max cutting height: 72 mm Saw carriage speed: 70 m/min Pusher speed: 60 m/min Max blade: 380 mm Max scoring blade: 200 mm 8 clamps AES Alpha Heavy Duty Paneelzaag 3200 mm | Showroomstaat | Minder 100 Werkuren Categorie: Paneelzaag / Opdeelzaag Conditie: Gebruikt – Zo goed als nieuw (Showroom) Beschrijving: Hnsdpfx Aoyzzguoi Nsk Te koop: AES Alpha heavy duty paneelzaagmachine. Deze machine werd uitsluitend gebruikt in een showroomomgeving voor demonstraties en trainingen. De machine verkeert in uitstekende staat en heeft minder dan 100 werkuren. Uitgerust met hoogwaardige aandrijvingen van Yaskawa en Schneider Electric, wat zorgt voor maximale betrouwbaarheid en precisie. Technische specificaties: Snijbreedte: 3200 mm Brugdiepte: 3800 mm Hoofdmotor: 15 kW (20 HP) Voorritsmotor: 2,2 kW (3 HP) Maximale zaaghoogte: 72 mm Zaagwagensnelheid: 70 m/min Duwbalk snelheid: 60 m/min Max. zaagdiameter: 380 mm Max. voorritsdiameter: 200 mm 8 klemmen Luchtkussentafel (3 stuks): 1 vast, 2 verplaatsbaar Pneumatische zaagwagen beweging Aandrijvingen: Yaskawa & Schneider Levering: Binnen 10 dagen mogelijk Prijs: Op aanvraag

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Model – ALTAIR 70 P. Serial number – 001.041.10. Date of manufacture - 2010. Speed – up to 12 packs/minute. Hsdpfx Aieyzxgfo Nenk Electrical supply – 400 V / 50 hz / 3 phase. Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high.

Condition: excellent (used), For sale: Professional measuring set from the Japanese company Mitutoyo, model SBM-25CXST (cat. no. 568-925). This set is designed for precision measurement of hole diameters and cylindrical parts in the range from 12 to 25 mm. Set contents: Mitutoyo ABSOLUTE Digimatic digital bore gauge with LCD display; Three measuring heads: 12–16 mm, 16–20 mm, 20–25 mm; Setting rings: Mitutoyo 19.997 mm and HK66 19.001 mm; Extension rods and additional accessories; Original Mitutoyo wooden case with custom foam insert. The ABSOLUTE system ensures stable measurements and no need for re-zeroing every time the device is switched on. Digital readout provides quick and reliable measurements with high accuracy. The set is in very good condition, complete and ready for use. Ideal for measurement laboratories, quality control, and tool workshops. Hnodpfsw R E Hvox Ai Nok

Condition: new, Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Technical data for pallet racking beam: Racking system: Mecalux Included in delivery: 01x Pallet racking beam, new Material color: RAL 2001 orange Suitable for frame: A103 Beam type: 2C-S 1115 Box profile: 110 x 50 mm Hook type: G.E. - 3 Clear span: 2,700 mm Weight per piece: approx. 15.026 kg Max. load capacity per pair of beams: 3,000 kg with evenly distributed load 02x Integrated locking pins, new For securing the beams against unintentional lifting General information about the article: This item is offered for collection only. Transport or shipment beyond this is subject to additional costs, which can be quoted separately depending on the delivery location and scope. Our range of services (prices on request): Assembly and installation Our general assembly terms and conditions apply Racking inspection Racking inspection according to DIN EN 15635, carried out in accordance with BGR 234 visual inspection requirements for all racking systems Delivery with our own vehicle fleet (unloading not included) Hedpfx Aish Dv Uqj Nenk

Year of construction: 2026, condition: new, Complete - turnkey roll forming line for perforated scaffolding plank production with high precision and automation. Bosporas Machinery is a manufacturer of coil processing and roll forming lines, delivering high-performance and customized industrial solutions worldwide. This scaffolding plank roll forming line is designed for the production of perforated steel planks used in scaffolding systems and construction applications. The system provides a complete turnkey solution from coil feeding to finished plank output. Engineered for continuous industrial production, the line ensures high precision forming, consistent perforation quality and reliable long-term operation. PRODUCTION CAPABILITY The system is designed to produce: Perforated scaffolding planks Anti-slip plank surfaces Different plank widths and lengths (customizable) LINE CONFIGURATION The production line consists of: Hnjdpfxoyzfyfo Ai Njk Decoiler Straightener Servo Feeder Mechanical Press Perforating & Embossing Tool / Die System Roll Forming Machine (multi-station design) Cutting System Conveyor & Stacking System ENGINEERING FEATURES High precision perforation and embossing system Servo-controlled feeding for accurate punching Multi-station roll forming structure for stable shaping Heavy-duty machine frame for continuous operation Modular and customizable design PLC & HMI controlled automation system OPERATIONAL ADVANTAGES Turnkey production solution High efficiency and production speed Consistent product quality Flexible production for different plank designs Short lead time compared to European manufacturers APPLICATION AREAS Construction industry Scaffolding system manufacturers Industrial platform production Infrastructure projects REFERENCE PROJECTS Images included in this listing show reference installations of scaffolding plank production lines successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references and technical details can be provided upon request. THE LINES THAT WE ARE EXPERIENCED: Guard Rail Production Lines C, U, Z, And Solar Panel Profile Production Line Logistic Warehouse Traverse Production Line Cable Tray Production Line Market Shelving Production Line Suspended Metal Ceiling Production Line Solar Framing And Racking Production Line Lighting Fixture Body And Lid Production Line Panel Radiator Top And Side Cover Production Line Metal Grid And Planks Production Line Metal Door And Door Frame Production Line PVC Window Gypsum Board Profile Production Line Agriculture And Animal Husbandry Practices Agricultural Vehicle Applications Painting Plant Panel Production Line Automotive Industry Applications Coil Punching Application Household Appliances Industry Applications

Year of construction: 2026, condition: new, Complete and turnkey roll forming line for highway guardrail and road safety barrier production with multiple profile options. Bosporas Machinery is a manufacturer of coil processing and roll forming lines, delivering high-performance and customized industrial solutions worldwide. This guardrail roll forming line is designed for the production of highway safety barriers and road protection systems with high precision and efficiency. The system provides a complete turnkey solution from coil feeding to finished product stacking. The line is engineered for continuous production, ensuring stable operation, consistent product quality and long-term reliability in demanding industrial environments. PRODUCTION CAPABILITY The system can produce various guardrail and support profiles: 2-Wave (W Beam) Guardrail 3-Wave Guardrail C Post Profile Sigma Profile Omega Profile Ray A & Ray B Profiles LINE CONFIGURATION The production line consists of: Hydraulic Decoiler (10 Ton capacity) Straightening Servo Feeder Hydraulic Press Stamping Die & Punching System Roll Forming Machine Flying Shear Cutting System Conveyor System Automatic Stacking System ENGINEERING FEATURES High precision roll forming system Servo-controlled feeding for accurate punching and forming Heavy-duty machine structure for continuous operation Modular and customizable line configuration Advanced automation system (PLC & HMI controlled) OPERATIONAL ADVANTAGES Turnkey production solution High production efficiency Consistent product quality Flexible profile production capability Short lead time compared to European manufacturers OPTIONAL CONFIGURATIONS Different profile designs and tooling options Automation and control system upgrades Integration with coil processing lines Custom engineering solutions APPLICATION AREAS Highway safety systems Road infrastructure projects Construction and public works Industrial barrier systems THE LINES THAT WE ARE EXPERIENCED: Guard Rail Production Lines C, U, Z, And Solar Panel Profile Production Line Logistic Warehouse Traverse Production Line Cable Tray Production Line Market Shelving Production Line Suspended Metal Ceiling Production Line Solar Framing And Racking Production Line Lighting Fixture Body And Lid Production Line Panel Radiator Top And Side Cover Production Line Hsdpfxeyzfi Tj Ai Nonk Metal Grid And Planks Production Line Metal Door And Door Frame Production Line PVC Window Gypsum Board Profile Production Line Agriculture And Animal Husbandry Practices Agricultural Vehicle Applications Painting Plant Panel Production Line Automotive Industry Applications Coil Punching Application Household Appliances Industry Applications

Year of construction: 2026, condition: new, Compact and reliable mechanical decoilers for light and medium coil handling with multiple capacity options. Bosporas Machinery is a manufacturer of coil processing and press feeding systems, delivering high-performance and customized industrial solutions worldwide. Our mechanical decoilers are designed for efficient, stable and cost-effective coil handling in various industrial applications. These machines offer reliable unwinding performance with compact design and easy operation, making them ideal for press feeding lines and light coil processing systems. The system is based on a mechanical expansion mandrel structure combined with motor-driven rotation and adjustable speed control, ensuring controlled and stable coil feeding. AVAILABLE MODELS 750 kg Mechanical Decoiler 2.500 kg Mechanical Decoiler 4.000 kg Mechanical Decoiler TECHNICAL RANGE Coil Weight Capacity: 750 kg – 4000 kg Coil Width Range: 20 mm – 1300 mm (depending on model) Coil Outer Diameter: 700 – 1300 mm Coil Inner Diameter: 300 – 630 mm / 480 – 600 mm (model dependent) ENGINEERING FEATURES Mechanical expansion mandrel system Motor-driven rotation system Frequency inverter controlled speed adjustment Belt and pulley transmission system Brake-controlled mandrel system Right-to-left / left-to-right operation capability OPTIONAL FEATURES Pneumatic upper arm (snubber arm) system Coil hold-down system Custom mandrel configurations Integration with press feeding systems OPERATIONAL ADVANTAGES Compact and space-saving design Cost-effective solution for light and medium coils Easy installation and operation Hsdpfx Aijyzd I Is Nsnk Low maintenance requirements Flexible configuration options APPLICATION AREAS Press feeding lines Stamping and metal forming Sheet metal processing Roll forming lines General industrial applications REFERENCE & EXPERIENCE Images included in this listing show reference installations of similar mechanical decoilers successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references and technical details can be provided upon request.

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Hnedpfjxmt Eqox Ai Nok

Condition: excellent (used), For sale: robust mounting plate/machine table with T-slots. Constructed from thick-walled steel, painted blue. Excellent base for installing large components, fixtures, or for measuring and machining applications. Hnjdpfx Aiew Rdtuo Nsk • Dimensions: 2570 x 770 x 200 mm • Surface with T-slots • Precisely machined top section • Weight: 900 kg • Can be transported or loaded by forklift

Year of construction: 2025, condition: new, Ultrasonic bath UEC 300 is industrial solution for cleaning large and heavy parts that are very dirty. The machines contain a pneumatic elevator capacity of 200 kg. Working frequency is 28kHz with sweep technology. The machine consists of a main ultrasonic bath with three side ultrasonic piezo transducers and second, overhead bath with oil separator. Control is with high quality touch screen HMI with 3D display notifications. Complete bath is made from acid resistance stainless steel AISI304 thickness 2mm. ----- Characteristics : Platform size : 900x570mm Maximum load : 200 kg. Useful height : 400mm Ultrasonic power : 3kW(6kWp-p) Ultrasonic frequency 28 kHz with sweep mode Heater power : 9kW FEATURES : Hnodpfegd Uifex Ai Nok Touch screen 7 " with 3D notification Automatic water filling system. Automatic elevator mode work Level sensor Elevator position sensors Cover sensor Warranty : 2 years. WE HAVE AND OTHER MODELS ON STACK

Year of construction: 2026, condition: new, High capacity coil slitting line available from stock with fast delivery and turnkey configuration. Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. FAST DELIVERY ADVANTAGE Stock machine – ready for shipment Special offer: 1 set of slitting knives is included free of charge with this ready-to-deliver machine. Delivery within approximately 1 month No production waiting time Special opportunity offer This coil slitting line is available from stock and ready for fast delivery, offering a unique opportunity for companies looking for immediate production solutions without long lead times. This coil slitting line is designed for high-capacity production and demanding industrial applications. The system ensures stable operation, high slitting precision and reliable performance even under continuous heavy-duty working conditions. TECHNICAL SPECIFICATIONS Material Thickness: 0.3 – 3 mm Coil Width: up to 1500 mm Coil Weight: up to 20 Ton Slitting Speed: up to 40 m/min Slitting Accuracy: ±0.1 mm LINE COMPONENTS Hydraulic decoiler (20 Ton capacity) Hydraulic coil loading car Infeed system with straightener unit Slitting head with precision knife adjustment Scrap winding system Tension unit and separator system Hydraulic recoiler Exit system and automation ENGINEERING FEATURES High precision slitting performance Servo-supported and stable feeding system Robust slitting head with gearbox transmission Adjustable knife system for different slit widths Heavy-duty structure for industrial production Advanced automation system (HMI controlled) OPERATIONAL ADVANTAGES Immediate availability Reduced investment waiting time Reliable and stable production Suitable for various materials (steel, aluminum, etc.) Short lead time compared to European manufacturers 24/7 after sales support APPLICATION AREAS Hnedpfx Aeyzbzrji Njk Steel service centers Coil processing facilities Sheet metal manufacturers Automotive and construction industries

Year of construction: 2026, condition: new, Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. Our compact coil slitting lines are designed for efficient and precise slitting of light and medium gauge materials. These systems offer flexible configurations ranging from entry-level compact lines to more advanced solutions with integrated straightening units. The lines are engineered to provide stable operation, consistent slit quality and optimized production efficiency while maintaining a compact footprint and cost-effective investment level. AVAILABLE CONFIGURATIONS 1 mm | 1300 mm | 4 Ton | Pitless Compact Slitting Line 3 mm | 600 mm | 6 Ton | Compact Slitting Line (Pinch Roller Feeding) 3 mm | 600 mm | 6 Ton | Slitting Line with Straightener Unit 3 mm | 1000 mm | 6 Ton | Compact Slitting Line (Pinch Roller Feeding) SYSTEM CONFIGURATION OPTIONS Depending on production requirements, the line can be supplied with: Straightener unit for improved material flatness and feeding stability Pinch roller feeding system for compact and cost-effective operation Single pit or pitless design based on layout requirements TECHNICAL RANGE Hnjdpeyzbm Usfx Ai Nsk Material Thickness: 0.3 – 3 mm Coil Width: up to 1300 mm Coil Weight: 4 – 6 Ton Slitting Accuracy: ±0.1 mm MAIN LINE COMPONENTS Hydraulic decoiler (expanding mandrel system) Coil loading system (optional) Infeed system with pinch rollers or straightener unit Slitting head with precision knife adjustment Scrap winder system Tension unit and separator system Recoiler with hydraulic mandrel Electrical control and automation system (HMI controlled) ENGINEERING FEATURES High precision slitting performance Adjustable slitting knives with fine positioning system Robust gearbox-driven slitting head Stable tension control system Compact and modular machine design Bidirectional operation capability OPERATIONAL ADVANTAGES Flexible configurations for different budgets and needs Compact design for limited factory space Stable and continuous production Easy operation and maintenance Short lead time compared to European manufacturers APPLICATION AREAS Steel service centers Sheet metal processing companies HVAC and construction materials Automotive sub-suppliers General metal processing industries

Year of construction: 2026, condition: new, High precision sheet metal leveler system with servo-driven technology and customizable thickness and width configurations. Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. Our precision leveler machines are designed to eliminate internal stresses and ensure perfect flatness in sheet metal processing applications. Equipped with advanced servo motor technology, the system delivers synchronized, stable and repeatable leveling performance for demanding industrial operations. The machine is engineered as a high-performance solution combining precision leveling, material stability and continuous production efficiency in a compact and robust structure. The system is equipped with multiple precision straightening rollers supported by backup rollers, ensuring superior flatness correction and internal stress relief across the entire material width. This advanced structure enables consistent, high-accuracy leveling performance even in demanding applications. THICKNESS RANGE (FLEXIBLE CONFIGURATION) The system can be manufactured in different configurations depending on application requirements: 0.5 – 2.5 mm 0.4 – 8 mm 1.5 – 10 mm 2 – 15 mm 10 – 20 mm Custom production is available according to material type, thickness and project requirements. ENGINEERING & DESIGN High precision straightening performance Servo motor driven system for stable and accurate operation Advanced cassette-type structure for easy maintenance and fast adjustment Heavy-duty gear transmission system Hnsdeyzbmzopfx Ai Nsk Bidirectional operation capability (left-right / right-left) PERFORMANCE High flatness accuracy Continuous and stable operation Reduced internal stress in material Optimized for industrial production environments SYSTEM COMPONENTS Precision leveler unit Cassette structure Gear transmission system Electrical and automation system Entry / exit conveyor (optional) OPERATIONAL ADVANTAGES Excellent flatness and surface quality High repeatability and process stability Reduced downstream processing problems Flexible design for different industries Short lead time compared to European manufacturers APPLICATION AREAS Steel service centers Cut to length lines Coil processing lines Automotive and metal industries Sheet metal production OPTIONAL EQUIPMENT Entry / exit conveyor systems Automation and control upgrades Integration with coil processing lines (especially cut-to-length lines) Custom engineering solutions