Used Brotmas Bsk 130 for sale (4,419)

Condition: excellent (used), Autotherm Here we offer a 6-circuit temperature control unit. Without an active refrigeration unit! According to the enclosed technical brief: Temperature range: -40°C … +85°C (extended temperature range -40°C…+130°C) Increased heating capacity: 27 kW instead of 18 kW Includes 1 temperature control in the main circuit Includes 6 temperature measurements in the respective supply line Includes 6 temperature measurements in the respective return line Includes 6 flow rate and pressure measurements in the respective supply line Includes 6 flow rate and pressure controls 1 l/min .. 12 l/min and 0.1 bar … 3 bar Includes changeover control Includes frequency inverter-controlled pump in the main circuit Includes 6x 3-way valve Includes 6 additional overflow valves, adjustable from 2 … 12 bar Pre-set to 2.4 bar Includes filling and emptying device For all circuits, common/simultaneous operation Includes 50l integrated tank Includes pneumatic emptying function Includes S7 control system Energy saving and increased cooling capacity: An additional glycol circuit integrated in the temperature control circuit takes over the cooling of the consumer in a temperature range of +85°C to +30°C. The absorbed energy is transferred to the on-site Pedpfx Afjzd Rtyj Segt < 20°C cold water network. The cooling capacity is 50 kW at a supply temperature of +20°C. This increases the cooling rate in this temperature range and saves energy due to the shorter running time of the refrigerant compressor. (The dimensions of the basic unit, according to the data sheet, are increased by approx. 0.3 m²) Assembly in a Rittal modular enclosure: 2x TS8 800x1000x2000 mm 1x additional, enclosed enclosure, min. 600x600x2000 mm (for control/electrical components) Supplied via on-site or optional cooling medium supply Supply temperature, on-site cooling brine -43°C, cooling brine requirement 7.5 m³/h, continuously controlled For cooling capacity, a cooling medium must be connected! Weight approx. 1200 kg Type: Autotherm temperature control unit AWF 130-27/VK/6K Sale from our location! Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2015, operating hours: 1,317 h, functionality: fully functional, overall weight: 3,500 kg, fuel type: diesel, color: grey, axle configuration: 4x4, operation weight: 2,400 kg, maximum load weight: 1,100 kg, empty load weight: 2,400 kg, gearing type: hydrostat, Equipment: ABS, additional headlights, air conditioning, all wheel drive, differential lock, hydraulics, parking heater, An authorized SUBARU dealer in Łaziska Górne offers a utility vehicle with attachments such as a plow, sweeper, or similar, imported from Norway from its first owner. It was previously used as a transport cart on a private company property. It has a tipper bed installed. This is professional equipment for municipal work. Equipped with a powerful 50 hp 4-cylinder KUBOTA engine and 4x4 drive, it can operate in difficult conditions. It features quick-release couplings at the front. It has been regularly serviced and was in working condition until the time of purchase. It is possible to equip this vehicle with a sweeper or scrubber. A NEW unit of this equipment costs PLN 596,000 NETTO at a SUBARU dealer, including the sweeper attachment – the last photo is from the official website. With the purchase, you receive a complete set of documents! We offer all forms of payment: leasing, credit, cash, and bank transfer. With cash or bank transfer payment, you can drive the machine away from the showroom immediately. CHECK US OUT! We also deliver paid machines and trucks to the specified address throughout Europe. For more information about our services, please contact our sales representatives. Weights and dimensions: GVWR: 3500 kg Curb weight: 2400 kg Payload: 1100 kg GVWR (combination): 6500 kg Towing capacity (with brakes): 3000 kg External dimensions: Length: 410 cm Width: 160 cm Height: 225 cm Equipment: Comfortable 2-person cabin Air conditioning Cabin heating Heated driver's seat Reversing camera Panoramic cabin glazing for excellent visibility Large exterior mirrors Hydraulic drive for forward/reverse movement Hydraulic system with a maximum pressure of 43 MPa Ability to tow a trailer Robust Kärcher municipal construction, German production TECHNICAL DATA: Kubota diesel engine, 4-cylinder Power: 36 kW / 50 hp Emission standard: Stage IIIA Drive: Hydraulic drive; in this version, a 4x4 drive and traction control are used Maximum speed: 40 km/h Pgjdezkf Ewjpfx Af Sst Working speed: up to 20 km/h Gradient ability: 25% Turning radius: 1210 mm The stated price is NETTO and applies to export and business customers. A significant discount is available for individual customers – please contact us directly by phone to get your best price.

Condition: excellent (used), CTS TSS-70/130 Temperature Shock Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Machine Type: Temperature Shock Testing Chamber / Temperature Testing Chamber Test Volume: approx. 130 liters For sale is a used temperature shock testing chamber from the manufacturer CTS. The system is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, quality assurance, and research and development. Technical Data Pgjdpfx Afezf Ibko Sjt Hot Chamber: +50 °C to +200 °C Cold Chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Cycle time: < 10 seconds Temperature adjustment rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min Cooling rate: approx. 4 K/min Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K External dimensions approx.: 2335 x 940 x 1820 mm (W x D x H) Loading dimensions approx.: 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions approx.: 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight approx.: 950 kg Power connection: 400 V 3/N / 50 Hz Power consumption: approx. 16.6 kW Rated current: approx. 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant Pre-cooling Stage: R404A, 4.0 kg Refrigerant Cooling Stage: R23, 0.6 kg / 10 bar Operating overpressure PS: 25 bar Operating Requirements Water-cooled design Cooling water connection required Compressed air connection required Operation possible only with cooling water and compressed air Cooling water inlet: 3 - 6 bar Equipment CTS Control Panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Trolley with lead screw drive Test chamber / trolley made of stainless steel Insert basket made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Scope of Supply 1x CTS TSS-70/130 Temperature Shock Testing Chamber Insert basket / test chamber equipment Existing documentation / files Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The device can be switched on Scope of supply as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Year of construction: 2002, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. travel stroke X-axis: 6400 mm Max. Travel of Y-axis: 400 mm Max. travel range Z-axis: 380 mm Control E 500 Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying 2 angle heads and a high-speed spindle 8 pneumatic material clamps Pjdpfxezf I Tto Af Ssgt Oscillating operation possible Photoelectric sensors

Condition: used, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,500 mm, rotational speed (max.): 3,000 rpm, QUILL TRAVEL MM.130 SPINDLE TAPER ISO 50 Pedpfx Aozl Duyef Sjgt X TRAVEL (TABLE) MM.4000 Y TRAVEL (VERT.COLUMN) MM.2000 Z TRAVEL(CROSS COLUMN) MM.1500 W TRAVEL (QUILL) MM.700 RPM 3000 SPINDLE MOTOR POWER KW.52,5 APPROX.WEIGHT TON.35 CNC HEIDENHAIN TNC 530 ROTARY TABLE MM.1500x2000 (12TON) AUTOMT.UNIVER. HEAD AUA 360 (1°x1°) IN & OUT SPINDLE COOLANT SYSTEM ATC 50 POS. CHIP CONVEYOR N.2 ANGLE PLATES MM.1800x800x600 N.2 ANGLE PLATES MM.1140x500x640

Condition: new, Neugart PSFN140-020-SSSD3AG-Z32/60/130/165/B5/M10 planetary gearbox SN: 2186 incl. motor flange, unused in opened original packaging, 100% fully functional, delivery as per photos. Psdpfxey Npg Se Af Sjgt

Condition: ready for operation (used), Heidenhain ERN 130 2500 03S12-03 . 589 612-0E SN 26766423, used, in good condition, 100% functional, delivery as shown in the photos. Pgedoy Nqd Sjpfx Af Sjt

Condition: ready for operation (used), Heidenhain UV 130 ID: 324 998-03 SN: 13939866B – including test protocol, professionally fully overhauled and tested with 3 months warranty, 100% functional, scope of delivery as shown in photos. Please note: In the exchange process, your defective exchange part must not exhibit any mechanical damages such as fractures, as these are beyond repair. In such cases, a subsequent charge of €500 incl. VAT will be applied. Attention: You are bidding on an inverter from Heidenhain UV 130 ID: 324 998-03 SN: 13939866B on an exchange basis (exchange service), professionally fully overhauled and tested with 3 months warranty, 100% functional, scope of delivery as per photos. In both repair and exchange procedures, your defective exchange part must not show any mechanical damage such as breakages, as these are no longer repairable. In this case, a surcharge of €500 incl. VAT will apply. Pgodpfx Asy Nrm Uof Set

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total length: 3,150 mm, total width: 1,315 mm, total height: 1,665 mm, overall weight: 800 kg, input voltage: 380 V, type of input current: three-phase, power: 8 kW (10.88 HP), Equipment: documentation/manual, Marel I-Cut 130 PortionCutter – Like New, Minimal Usage For sale: Marel I-Cut 130 PortionCutter, a high-end intelligent portion cutting machine designed for fresh boneless meat products. One of the most advanced and accurate portioning systems available on the market. The machine was purchased brand new directly from Marel in 2022 for a dedicated production line. Due to changes in our production setup, the machine has seen very limited use and remains in outstanding condition, close to new. Ideal for: * fresh boneless meat processing * pork loin, pork chop, neck, breast, fillet, etc. * fixed-weight and fixed-length portioning * industrial meat processing and retail production Main Features: * high-speed intelligent portion cutting system * advanced laser and 200 Hz camera scanning technology * precise fixed-weight and/or fixed-length cutting * multiple cutting angles: 45°, 55°, 65° and 90° * user-friendly touchscreen interface * fully stainless steel hygienic construction * automatic belt speed adjustment * servo motor technology for extremely accurate cuts * remote access support via Secomea * engineered for easy cleaning and sanitation Technical Specifications: * Model: Marel I-Cut 130 * Year: 2022 * Weight: approx. 750–850 kg * Dimensions: approx. 3150 x 1315 x 1665 mm * Power supply: 380–480V * Power consumption: approx. 8 kW * Food-grade stainless steel construction Additional Information: Pgjdjy Uaa Tjpfx Af Sst * Excellent condition / minimal operating hours * Purchased new directly from Marel * Available for inspection and testing * Perfect for meat processing facilities looking for premium precision cutting equipment

Year of construction: 2021, condition: as good as new (ex-display), Display cutterheads - demo set 2 x new Tersa planing heads D140x130x50 Pgjdpfx Ajzdq Eiof Set All original Swiss Made. It doesn't get any cheaper! One-time super cheap set offer

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, roller (top) diameter: 130 mm, side roll diameter: 110 mm, working width: 1,030 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 2.2 kW (2.99 HP), number of digital displays: 3, Equipment: emergency stop, foot remote control, 4-Roll Round Bending Machine Manufacturer: Sahinler, Type: 4RM 10-130 HRC Year of Manufacture: 2008 Technical Data Manufacturer: Sahinler Type: 4RM 10-130 HRC Year of Manufacture: 2008 Usable Length: 1030 mm Top Roll Diameter: 130 mm Side Roll Diameter: 110 mm Sheet Thickness (without pre-bending): 6 mm Sheet Thickness (with pre-bending): 5 mm Total Power: 2.2 kW Dimensions: 2.4 x 1 x 1 m Weight: approx. 1.5 t Equipment • Hardened rolls • Digital display for roll positioning Podpfx Aezcpu Ujf Sjgt All information without guarantee.

Condition: good (used), Hydraulic straightening press Manufacturer: G + K Year of manufacture: 1992 Psdpfxezkg Igs Af Sogt Max. pressing force: 130 t Table size (bottom): 800 x 500 mm with T-slots Table size (top): 800 x 500 mm with T-slots Installation dimension: 1000 mm System pressure: 250 bar Electric motor: 15 kW Weight: 3400 kg Operating voltage: 380 AC, 24 DC Control system renewed 5 years ago The machine is equipped with 2 tables, one at the bottom and one at the top, each measuring 800 x 500 mm. A throttle valve is installed on the hydraulic unit to adjust the pressure.

Condition: new, Rexroth MDD112C-N-030-N2M-130GB1, part no.: R911264264, serial no.: 7162111000378, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Pgjdei D Nhlspfx Af Sjt

Condition: ready for operation (used), Indramat MAC 112A-0-LD-2-C/130-A-0 permanent magnet synchronous motor, serial number as shown in the photo, mounting hole spacing: 152 x 152 mm, drive shaft diameter: 32 mm, used, normal signs of wear, 100% functional, scope of supply as shown in the photos. Pedji D Iikepfx Af Ssgt

Condition: excellent (used), cable tie fastening, cable tie holder, multiple fastening strip -Manufacturer: Panduit, cable tie fastening cable tie holder Pedpfx Afewx Rn No Ssgt -Type: MTP series -Number: 167 holders available -Price: per piece, minimum order 20 pieces -Dimensions each: 130/16/H5 mm -Weight: 0.005 kg/piece

Condition: good (used), Variator pulley, variable speed pulley, variable belt pulley, PIV transmission, variable speed transmission, variable speed pulley, variable pulley, expansion pulley, adjustable V-belt pulley Pgjdpfx Afswz U U Ee Sjt -Manufacturer: Lenze, Vario belt pulley with compression spring -Outer diameter of pulley: 130 mm -Inner diameter of the opening: 18 mm -Quantity: 1x pulley available -Price: per piece -Dimensions: Ø130 x 95 mm -Weight: 1.2 kg/pc.

Condition: good (used), Machine vice, sturdy vice, drill press vice -Jaw width: 215 mm -Clamping depth: max. 130 mm -Dimensions: 550/220/H125 mm -Weight: 50 kg Pgedpfxsb A H U Us Af Sot

Condition: good (used), Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Peak height: 130 mm -Recording: MK2 -Adjustment of tip from center: - 25 mm -Dimensions: 240/210/H160 mm Psdpfxsd Hvh Io Af Sogt -Weight: 7 kg

Condition: good (used), Open-end wrenches, ring wrenches as remaining stock -various sizes -Weight of tool: approx. 100 kg Pgodpsb A Nxqjfx Af Sjt -Manufacturers: Gedore, Promat, Rahsol -Transport box: 800/450/H320 mm -Weight including packaging: 130 kg

Condition: used, Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling -Hollow shaft: Ø 40 mm -Dimension: Ø 130 x 80 mm Pedpeflw A Djfx Af Ssgt -Weight: 5.5 kg

Condition: used, Motor centering flange, motor flange, pump flange, motor centering bell, clutch bell, bellhousing for large pumps, hydraulic pump, oil pump, gear pump -Motor centering: 250 mm -Centering pump: 62 mm -Height: 130 mm -Material: "Alu" Pgsdod R Hq Sjpfx Af Sjt -Number: 7x centerings available -Price: per piece -Dimensions: 285/285/H130 mm -Weight: 3.1 kg/piece

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: stroke 130 mm -Piston rod: Ø 40 mm Pgedpfogvm Dfsx Af Set -Mounting holes: Ø25 x 35 mm -Cylinder: outside Ø 106 mm -Dimensions: 560/140 / H110 mm -Weight: 17 kg

Condition: good (used), Hydraulic power unit, hydraulic pump, hydraulic pump -Hydraulic unit comes from a 15 t lifting platform -Max. pressure: 130 bar -Tank capacity: 100 liters -Motor: 7.5 kW 1450 rpm -Equipment: Emergency hand pump, hand valve, electric valve, emergency drain, -Dimensions: 1130/445/1320 mm Pgjdpfx Afjd S D Dko Sjt -Weight: 334 kg

Condition: used, Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor, permanent magnet main drive motor -Manufacturer: Indramat, motor from machining center Schleicher WV-SYS 160-1050 -Type: MAC112B-1-PD-2-C / 130-A-1 / S005 Pgodpfxjg Ehako Af Set -Speed: 1500 rpm -Brake: 14 Nm DC 24 V -Shaft: Ø 32 x 60 mm -Number: 2x motors available -Price per piece -Dimensions: 550/210 / H250 mm -Weight: 38 kg

Condition: used, Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor, permanent magnet main drive motor -Manufacturer: Indramat, permanent magnet main drive motor from machining center Werner TC 2.6K -Type: MAC112B-O-GD-2HC / 130-AO -Power: 3.55 kW Pgsdpfx Afogz Tkie Sot -Speed: 2750/6000 rpm -Shaft: Ø 32 x 60 mm -Dimensions: 445/195 / H245 mm -Weight: 38 kg