Used Bonfiglioli C65 for sale (159)

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 1: KSB Blockp Etabloc 65-200/3002 GN10 IEC standard motor KSB 30 kW 2900 rpm Part No.: 48875108 Single-stage volute casing pump with rated capacities according to EN 733, fitted with KSB IEC three-phase motor, protection class IP 55, insulation class F, assembled as a block unit. Pump shaft rigidly coupled to motor shaft. Equipped with uncooled mechanical seal, corrosion-resistant shaft sleeve, replaceable wear rings. Drive lantern made of cast iron, with contact protection in accordance with EN 294. Mounting by support foot up to motor size 112, by motor foot from motor size 132 upwards. Volute casing: Cast iron Nlsdpfx Aoxbhtlofaja Impeller: Cast iron Shaft, pump: Tempered steel

Condition: good (used), Year of construction: 1996, CNC turning center TRAUB Type:TNC65 DG Year 1996 Control TRAUB TX8F With lots of accessories. Nodpfxju Eug Ij Afasla

Condition: excellent (used), functionality: fully functional, load capacity: 650 kg, Equipment: foot remote control, Tilting rotary table with 650 kg load capacity, foot remote control Faceplate diameter: 850 mm Rotational speed: 0.01–2.0 rpm Nledpfx Afowtrumeaja Mass coupling: 300A Optionally available with 3-jaw chuck Tilted height: 900 mm minus 120 mm Horizontal height: 950 mm minus 120 mm

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: AB0702, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, controller model: FANUC 21 iMB, table load: 500 kg, TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 500 mm Travel Z-axis: 530 mm Table clamping surface: 800 x 500 mm Spindle speeds: 60 - 8,000 rpm Spindle taper: SK 40 Spindle taper standard: DIN 69871 A Maximum table load: 500 kg Rapid traverse X/Y/Z-axis: 30 m/min Tool changer: 30 positions Tool diameter with full magazine: 80 mm Tool diameter with 2 free positions: 120 mm Maximum tool length: 250 mm Maximum tool weight: 7 kg MACHINE DETAILS Control: FANUC 21 iMB Total power requirement: 30 kVA Dimensions & Weight Machine dimensions (L x W x H): 2.4 x 2.2 x 2.46 m Machine weight: 4.5 t EQUIPMENT NC rotary axis with tailstock, manufacturer MECA-DIVIMEK (Spain), DCH 160 C Nlodpfjya E Thox Afaea 2 machine vices Coolant system

Year of construction: 2022, condition: ready for operation (used), A fully automatic horizontal tunnel stretch wrapper Bang & Co for securing products on corrugated cardboard blanks is available. Turntable speed: 100rpm, max. conveyor speed: 18m/min, carton width range: 70mm-650mm, min. product length: 200mm, max. spool diameter: 140mm, max. spool height: 125mm, film roll inner diameter: 38mm, film thickness range: 18µm-40µm. Machine dimensions X/Y/Z: approx. 1600mm/1250mm/1650mm, weight: approx. 500kg, operating hours: approx. 6851h. Dokumentation vorhanden. An on-site inspection is possible. Nledpfx Aoxwyvqjfaea

Year of construction: 2005, condition: ready for operation (used), A lathe (Universal Turning Solution) is offered, control: Fanuc, tool turret: 12-station, tailstock, 3-jaw chuck. Tool setting arm: Renishaw HPRA. Inspection is possible by arrangement. Njdpfxox I Rpxs Afajla

Condition: ready for operation (used), Year of construction: 2020, Two mobile industrial air cleaners Trotec that have only been used once are available. Air volume flow: 5700m³/h, negative pressure: 1150Pa, air volume for filter class H: 3000m³/h, min. filter area with H13: 26m², opening diameter: 380mm. Machine dimensions X/Y/Z: approx. 1300mm/800mm/1050mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Njdpfx Afsx Tulzjajla

Year of construction: 2012, condition: ready for operation (used), A CNC cylindrical grinding machine GP Basis Karstens with rotating grinding headstock is available. Grinding length: 650mm, center height: 250mm, workhead: MK4, tailstock: MK4, wheel diameter: 400mm, spindle diameter: 80mm, sleeve length: 250mm, speed: 3000rpm, spindle power: 1.5kW, control: Siemens and Balance System VM25. Documentation available. On-site inspection is possible. Nsdpfxeu Nlk Ss Afaola

Condition: ready for operation (used), A fully automatic cellophane wrapping machine is available. Packaging capacity: approx. 65cycles/min, folding box length range: 40mm-120mm, folding box width range: 40mm-120mm, folding box height range: 20mm-75mm, film types: PP/BOPP, machine dimensions X/Y/Z: approx. 1550mm/850mm/2200mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Nledpfx Afoxn Aaasaoa

Condition: used, Year of construction: 1990, pressure 60 t throat 400 mm stroke 600 mm dayligth 700 mm table surface area 1120 x 700 mm table height over floor 850 mm ram surface 700 x 700 mm feed down 300 mm/sec feed up 130 / 260 mm/sec feed under pressure 5 / 10 mm/sec oil volume 275 l total power requirement 7,5 kW weight of the machine ca. 7,3 t required space 1,6 x 2,0 x 3,7 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation can be inspected in running condition in our warehouse - new control can be offeren on request Nlsdpfx Afsvut Edsaja

Year of construction: 2009, condition: good (used), Horizontal machining center (HMC) DECKEL MAHO - DMC65 H duoBLOCK MACH-ID 7722 Make: DECKEL MAHO Type: DMC65 H duoBLOCK Control: HeidenHain iTNC530 Year: 2009 4 Axis Controlled simultenious New WEISS spindle in 2022 New Window SG Glass BLUM laser measuring Renishaw 3D Measuring taster Filtration and coolant system 600 Liter and 40 bar Specifications Metric US Standard X - Travel 650 mm Y - Travel 700 mm Z - Travel 700 mm B-Axis indexing 360 ° Table Length 450 mm Table Width 500 mm Table load 600 Number of pallets 2 Feed rate X-Axis 60000 mm/min. Feed rate Y-Axis 60000 mm/min. Feed rate Z-Axis 60000 mm/min. Spindle Taper 40 ISO/Bt/Mk Power on spindle 13 kW Speeds / ranges 12000 Rpm ATC / revolver 120 Coolant true spindle / Bar 40 Number of controlled axis 4 Chip conveyor Yes Coolantsystem Yes Dimensions (Estimate) Length 5900 mm Width 3586 mm Height 2524 mm Weight 11000 kg Nedpophlvijfx Afaela Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2013, operating hours: 1,719 h, functionality: fully functional, feed length X-axis: 470 mm, feed length Z-axis: 2,040 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, turning diameter over cross slide: 650 mm, turning diameter: 1,030 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, overall weight: 23,000 kg, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Nedpfxoxzgkio Afajla Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: excellent (used), Year of construction: 2013, operating hours: 1,800 h, functionality: fully functional, turning diameter over cross slide: 650 mm, turning length: 1,750 mm, turning diameter: 650 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 2,040 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, Okuma CNC Oil Country Hollow Spindle Lathe Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia Nlodpfexzi D Ssx Afasa 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: good (used), Year of construction: 2008, Spinner TC 65, year of manufacture 2008, control Fanuc 21 iTB, travel X/Z 230/740 mm, tailstock, quill stroke 120 mm, spindle speed up to 4,500 rpm, 12-position turret, all stations driven, C axis, VDI 30, tailstock, three-jaw chuck, bar capacity up to 65 mm. Nsdpfxoyapzie Afaola

Condition: good (used), Year of construction: 2005, Spinner Tc 65 MC, year of manufacture 2005, Fanuc control, X/Z travel 230/740 mm, 12-position turret, C axis, driven tools, tailstock, chip conveyor, parts catcher, postprocessor, tool measuring arm. Nlodpfx Ajyapitsfaoa

Condition: new, functionality: fully functional, Year of construction: 2026, power: 18 kW (24.47 HP), motor manufacturer: Kubota, gearing type: hydrostat, fuel type: diesel, maximum speed: 4 km/h, color: green, overall weight: 3,200 kg, front tire size: Rubber Crawler, total height: 6,500 mm, total length: 4,600 mm, total width: 1,200 mm, working width: 180 mm, Equipment: crop cutter, hydraulics, lighting, AGRILIFT C65D Superior Performance in Challenging Conditions Mazaka Crawler Platform is specially designed for difficult and sloping terrain conditions. High Reach Capacity With a 1-meter entry height and a maximum working height of 6.50 meters with the loading capacity of 1200 Kg , it provides easy access to hard-to-reach areas. Powerful Engine Equipped with an 18 kW Stage III diesel engine for high efficiency and durable performance. Mobility With a maximum driving speed of 4 km/h, it offers fast and efficient maneuverability on the job site. Robust And Stable With a total weight of 3200 kg, it delivers strong ground grip and exceptional stability. Nljdpfxex Tnz Ns Afaea

Condition: new, Siemens 6SC6500-0NA44 FBG controller with software, unused, in opened original packaging, in good condition, 100% functional. Nlsdpfx Afjxag Hheasa

Condition: ready for operation (used), Siemens 6SC6500-0NA44 Simodrive FBG control unit E Stand R14 + S01 used, 100% functional Nlodpfx Afsxag Hzjaja

Condition: ready for operation (used), Siemens 6SC6512-4AA01-Z transistor pulse inverter with Siemens 6SC6512-0AA00 card, serial number as shown in the photo, used, heavy signs of wear, 100% functional. ATTENTION: Please enquire separately for charges for packing and shipping! Nledpfxsxag Irj Afasa

Condition: new, Siemens 6SC6500-0NA01 HSA control SN 77023664, unused in sealed original packaging, 100% functional Nodjxag E Repfx Afaola

Condition: new, Siemens 6SC6501-0AB02 AC feed drive FBG power module, unused, in opened original packaging, 100% functional Nlodpfx Asxag H Usfasa

Condition: ready for operation (used), Siemens 6SC6504-0AA02 Simodrive 650 FBG transistor control unit, used, normal signs of wear, 100% functional, delivery as per photos. Nledpfx Afjxag Iloaoa

Condition: ready for operation (used), Balluff BIS C-6002-19-…-03-ST11 0733 DE / BIS C-650 evaluation unit, used, normal signs of wear, 100% functional, scope of delivery as per photos Njdpfx Asi D T Dysfaela

Condition: new, Siemens 6SC6500-0BC01 Simodrive 650 FBG spindle positioning E, version D > unused < in sealed original packaging, 100% functional Nlsdpjxag Ewjfx Afaoa

Condition: new, Siemens 6SC6500-0NA02 Simodrive control unit 650 BG < unused > in opened original packaging, 100% functional Nodpfxsxag Hbe Afaola