Used Bizmak - Tuerkei Embossing-Calender for sale (191)

Condition: used, maximum load weight: 26,827 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 16,240 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, Kässbohrer KSLA RJ Mega Jumbo Low Loader with Wheel Wells and Excavator Boom Recess Hardly Used Immediately Available Including Winch TECHNICAL SPECIFICATIONS: * Fifth wheel height (H5): approx. 950 mm * Rear swinging door: 2,300 mm * Overall length (L): 13,190 mm * Gooseneck length (Gl): 3,950 mm * Platform length (Pl): 9,240 mm * Extension (Pe): 3,500 mm * Locking position: 500 mm * Platform height (Ph): 770 mm * Wheelbase (Wb): 7,800 mm * Axle spacing (A): 2,260 mm * Axle load: 24,000 kg * Axles: 12 tons technical load capacity (10 tons permissible load capacity) BPW * Axles with drum brakes * Axle load: 8 tons load capacity * King pin capacity: approx. 15,000 kg * Unladen weight ±3%: 12,173 kg * Overall width (W): 2,550 mm + 600 mm (with extendable sides) * Sliding platform: Not included * Total weight (at 80 km/h): 39,000 kg * Total weight (at 60 km/h): 42,900 kg RUNNING GEAR: * Number of axles: 3 * Steering type: 2 x rigid axles at the front, 1 x trailing axle at the rear * Lift axle: Overload-dependent manual axle lift system on the 1st axle * Lift axle control: Manual * Wabco braking system * Tyres: 12 x 205/65 R17.5 * 1 x spare wheel holder on front bulkhead * Air suspension, 1 x load gauge indicating pressure at the axle assembly * NATO socket CHASSIS: * S700 MC * Gooseneck with 90° vertical corners Kdjdpfx Abexy Ddksfjn * 45 mm hardwood floor and steel floor with embossed pattern above the wheel wells only * Galvanized extensions 8 x 2 for enlarging the platform width up to 300 mm * Jost landing gear, 50 tons * Foldable rear supports, 45 tons * 2 pairs of wheel wells for transporting wheeled vehicles * Wheel well bridge for covering the wells RAMPS: * Ramp loading capacity: approx. 40 tons * Suitable for hydraulic folding and adjustment * Wooden floor, 40 mm thick, 3,070 mm long, 850 mm wide, 3,715 mm high (closed), ramp angle 14°, capacity 40 tons * Rear ramp safety: Ramp protection chain included LOAD SECURING: * Lashing rings: 2 x 2 x 5,000 daN capacity, 1 x 2 x 10,000 daN capacity rings on gooseneck; 3 x 2 x 5,000 daN, 4 x 2 x 10,000 daN rings on the outer platform; 2 x 2 rings with 8,000 daN capacity under the outer frame; 4 x 2 rings with 6,000 daN capacity at the tray area included * Stake pockets: 5 x 2 stake pockets (52 x 102 mm) * 6 x container lock housings and 4 x twistlock container locks for transporting 1 x 20FT or 1 x 30FT containers * Gooseneck panels: 1 x steel front plate (450 mm x 2,550 mm), 2 x aluminum side panels (360 mm x 1,500 mm), 1 x aluminum rear panel (360 mm x 2,550 mm) * Plug-in stakes: 8 x 2 units, 50 mm x 100 mm ACCESSORIES: * 1 x PVC-coated steel toolbox (single lid) 750 x 400 x 360 mm (H x D x W) * 1 x rotating beacon * 1 x work light on underrun guard * Oversize boards with LED lighting 2 x 2 units, 423 mm x 423 mm * Storage box on gooseneck (600 mm x 830 mm x 2,310 mm) * Timber planks for oversize transport * Chassis color: RAL 3020 Traffic Red For further information, please do not hesitate to contact us.

Condition: used, Year of construction: 1989, We offer this used Gietz FSA 790 hot stamping, embossing, die-cutting machine, year of construction 1989. Manufacturer: Gietz Model: FSA 790 Year of construction: 1989 Kdsdpfx Abey Iy Uqofen If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2025, functionality: fully functional, The (fish mask shape) mask machine offered here combines efficiency and safety features with an optimized fit. These product features are, among other things, thanks to the use of ultrasonic technology, an intuitive HMI with touch screen for easy and clear operation as well as an optimized and robust unrolling unit made of steel. Process steps at a glance: Feeding of the filter fleece via a web edge control system, as well as the nose wire, uniform welding of the mask with subsequent folding and separation of the base body. Kdodpfx Abjh Uuhcjfjn The next process step deals with the attachment of the earband using ultrasonic technology. Optionally, a camera inspection, stacking unit, and a tubular bag machine can be ordered separately. In detail: - Welded unwinding unit with a total of 4 manual tensioning shafts, magnetic powder brakes and web guide control system for feeding the filter fleece. - Nose wire is fed in by means of another unwinder. - The use of panes in combination with slim aluminum profiles allows a good insight into the production while at the same time providing full protection for the operator. - We are happy to offer you various printer systems on request to print the legally required information on your mask. - The use of ultrasonic technology and the use of durable materials such as titanium guarantee increased machine availability compared to conventional materials. - High precision through the use of servo-driven motors. - Uniform material feed and material guidance, as well as separation by means of a rotary cutter with lateral marking output. - High-resolution, user-friendly MHI's with touchscreen. - Mask body welding using ultrasonic technology with subsequent folding matrix and welding of the upper and lower surface. - Precise separation of the mask from the marking with the help of a rotary blade, with subsequent ejection of the mask and lateral ejection of the marking. - Subsequent ear band embossing by ultrasonic technology. - Optional: Camera inspection with good and bad detection - Optional: Subsequent output to a stacker. - Optional: Output to a flowpack station for individual mask sealing. Performance data & dimensions: - Power consumption: approx. 4-5 KW during operation - Power connection: 220 V/ 50 Hz - Quantities: 80 masks/min. - Compressed air: 7-10 bar - Weight: approx. 2.5 t - Dimensions: 8200x5000x1800 mm (LxWxH) - Mask dimensions closed (longest and widest point): 205 x 82 mm (+- 2mm) We would be happy to send you an individual, high-quality offer. For this we ask you to give us your company data in advance.

Condition: used, 502 Can Manufacturing Line Can 127mm dia Can weight 900g cans 130 cans/minute capacity Can fastening and embossing machine with associated controls and conveyor Slitter with sheet feed Stacking materials transfer system Can assembly welder Laquer curing tunnel, Can leak test system Can spin flanger CSW /54-MM 9F wide 0 -01 Can End Feed System Please note, this lot 30466-425 is offered for sale as a complete line. Its components are simultaneously offered as individual lots 30466-426 to 30466-433+N42 Bidders can bid on the complete line and/or on individual lots. Sales are conditional subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Kdedsy Uxx Uepfx Abfon Successful bidders will be notified within 2 working days.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: ........, Basic Specification: Two-station machine with a 250 mm web width. Print Head: One hot foil printing and embossing unit. Print position adjustable longitudinally, laterally, and rotatively. Features quick-change die plates. Die-cutting Station: Integrated die-cutting and punching unit with adjustable cut position longitudinally, laterally, and rotatively. Quick-change cutter plates for rapid setup. Kdedpfext N Twex Abfen Web Indexing: Digital electronic web registration system with a zero-backlash indexing drive. Unwind Unit: 1,000-metre unwind capacity, powered nip with loop feed to a vacuum tension drum for consistent web tension. Rewind: Separate label and matrix rewinders with independent rewind motors, reversible for both inside and outside rewinding operations. Foil Indexing: Two servo-driven foil pull units with quick-release nip rollers for efficient foil management. Direct Remote Access Unit: Enables direct remote access to the Newfoil machine via the Internet. The unit connects to your company network using a standard Ethernet cable. Firewall-friendly, utilizing a fully secure SSL-based VPN tunnel. Temperature Control: Digital temperature control with LED display, ranging from 0°C to 400°C. Operating Speed: Variable speed servo drive. Maximum throughput: 18,000 impressions per hour; minimum: 2,000 impressions per hour. Guarding: Fully enclosed “Clear View” guarding system with interlocked doors in compliance with current E.C. safety regulations. C.E. Mark: Each machine is C.E. marked and individually certified.

Condition: used, Technical details: pressure: 315 t chamfer lenght: 5050 mm distance between columns: 4100 mm throat: 500 mm stroke: 250 (Wange) mm control: DNC 884s weight of the machine ca.: 27,0 t machine dimensions LxWxH: 5,7 x 2,2 x 4,0 m Ksdpfx Abou Iccpofsdn Machine stands approx. 0.95 m inside foundation in the floor. Application for: Embossing and free bending via the DNC control, manual, semi-automatic and automatic operation is possible. distance between table and upper beam max. 490 Table: with extension about 800mm, tool holder on the table = dovetail 30mm. accessories: many dies and punches *

Condition: used, Technical details: pressure: 80 t distance between columns: 880 mm dayligth: 200 mm Table dimensions: 880x300 mm height over floor: 1000 mm distance between columns: 800 mm total power requirement: ca. 12 kW Kedpfou Icwtjx Abfsdn machine weight ab.: 2855 kg space requirements of the machine approx.: T:1,4xB:1,65xH:1,9 m Embossing - Hot Embossing application area: - for example: for foils, plastics, paper, hardboard materials etc. - stamp plate size: 600x310mm equipment: - counter - hydr. tank Accessories: - Mounting plate (600x300x90mm) not heatable. Sale as is. *

Condition: good (used), Year of construction: 1963, functionality: fully functional, machine/vehicle number: 24410, • Model: Heidelberg SBG • Type: 1-colour letterpress • Application: Paper processing / die-cutting and printing operations • Year of manufacture: 1963 • Format: 560 × 770 mm • Condition: Standard machine Kdsdpfxoxzzyrs Abfjn • Features: Robust classic letterpress machine, ideal for die-cutting, embossing, and specialised applications

Condition: ready for operation (used), Year of construction: 2012, operating hours: 56,566 h, punching force: 18 t, total height: 2,252 mm, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, controller manufacturer: BOSCH, controller model: MTX CMP70, product length (max.): 6,500 mm, This TRUMPF TruPunch 3000 S11 was manufactured in 2012. It features a Bosch MTX CMP70 control system, with X/Y-axis travels of 2500 / 1250 mm, and can handle sheet weights up to 160 kg. The machine includes a linear tool magazine with 18 stations and offers functions like MultiTool, MultiBend, and thread forming. Consider the opportunity to buy this TRUMPF TruPunch 3000 S11 CNC punching machine. Contact us for more information about this machine. • Maximum sheet weight: 160 kg • Performance: • Punching strokes (E = 1 mm): 1000 strokes/min • Marking strokes: 2500 strokes/min • MultiTool tool-change time: 0.3 s • Power consumption: • Standby with auto-shutdown: 0.3 kW (average) • During production: 5.6 kW (average) • Equipment & features: • MultiTool function • MultiBend function • Thread forming function with tool breakage monitoring Kdodpsx D Dklofx Abfsn • Surface marking/embossing function • Deburring and roller technology • Tool magazine: Linear, 18 stations • Power On hours: 56.566h • Documentation: TruPunch 3000 documentation

Year of construction: 1991, condition: good (used), Bruckner stenter frame Year of manufacture: 1991 Working width: 2400 mm Infeed: from batching Weft straightener Coating: above roller or fabric above Knife coating Dryer: Short infeed, suitable for coating Needle chain 6 fields Gas-heated At the exit: squeezing padder Cylinder cooling Output: batching winding, non-stop system USED INDUSTRIAL COOLING SYSTEM FOR COOLING ROLLS Manufacturer: CIAT Model: LGN 150V R410A Kdodpfx Abezam Awefen Year: 2010 Refrigerant: R410A Power supply: 3 × 400 V / 50 Hz Installed power: approx. 10 kW Cooling capacity: approx. 150 kW Suitable for: Cooling rolls Textile coating lines Calenders Laminating lines Plastic and rubber processing lines

Condition: good (used), approx. 5,500 pieces, folding crate, Euro stacking container, Bekuplast, 600 x 400 x 285 mm, gray - used - : Price per unit ex location (net): Minimum purchase 3 pallets (min. 384 crates): only 6.-€ (net)! for purchase of 9 pallets a (min. 1,152 pieces): only € 5 (net) for complete purchase: only € 4.50 (net)! Kjdpfx Abjvff H Uefsdn Manufacturer: Bekuplast Type: Clever-Retail-Box 56 ltr. 63843 Niedernberg Year of manufacture: unknown External dimensions: 600 x 400 x 285 mm (folded 65 mm high) Internal dimensions: 565 x 365 x 275 mm Sides and base closed Roughly ribbed sandwich base with welded plate in gray Color: grey 401 Base: sandwich base Sides: closed Handles: open Material: PP-C (polypropylene copolymer) Suitable for industrial use: Yes Weight: 2,955 kg 1 pallet packed approx. 2m high = approx. 128 crates, 1 pallet approx. 2.40 m high packed: approx. 156 boxes Condition: good, with embossed Weltbild logo Available: immediately, partial quantities later Location: CZ, Bor, later warehouse Frankenberg / Saxony

Condition: used, Year of construction: 2001, clamping force: 4,200 kN, opening stroke: 710 mm, total length: 7,900 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, number of injections: 2, power: 68 kW (92.45 HP), Demag Ergotech 420/800 2300 with embossing function and Wittmann DR 633/CNC 6-316 robot Prices and further inventory can be found at inventar-verkauf.de/id/alesco. Kdodpjy U Nkbjfx Abfjn In addition, 2 injection molding units are included, one of which was used exclusively for clear glass. Details: Clamping force: 4200 KN Tie bar distance: 800 x 710 mm Mold opening: 710 mm Control system: Ergocontrol NC 4 Connected power: 68 KW Overall dimensions: 7.9 x 2.2 x 2.5 m Total weight: 21.0 t Accessories/Equipment: Wittmann DR 633/CNC 6 - 316 robot (XxYxZ) 900 x 1600 x 3000 servo with support and enclosure 2-cavity core pull 2 E/A (electrical/pneumatic) Embossing function retrofitted 2 x Injection molding unit: Injection molding unit 1 Shot volume: 891 cm³ Shot weight: 800 g (polystyrene) Screw diameter: 60 mm Injection pressure: 2420 bar Injection molding unit 2 Shot volume: 1212 cm³ Shot weight: 1090 g (polystyrene) Screw diameter: 70 mm Injection pressure: 1877 bar WITHOUT KOCH NOZZLE and PLASTICIZER. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Sergi pyramidal calender 2000 x 4mm, DIMENSIONS: 350X85 X 110 (h) mm, WEIGHT 1300 KG. Upper roller diameter 125 mm, lower rollers: 125 and 128 mm. BENDING THICKNESS 4 mm Kdjdpfxjv Ifkfs Abfen

Year of construction: 1992, condition: excellent (used), functionality: fully functional, machine/vehicle number: P-Z 176, We are offering this very well-maintained Steuer PZ 90 foil embossing machine, manufactured in 1992. Kdsdpfoy Ulitjx Abfon Manufacturer: Steuer Model: PZ 90 Year of manufacture: 1992 This is a machine from the manufacturer STEUER, model PZ 90. - Embossing cylinder format 90x65cm (instead of 90x65cm) - Base is height-adjustable. This embossing cylinder has special functions, such as 3 hologram tracks for embossing (original from PZ-Steuer). The main motor underwent a general overhaul in 2025. There are 3 bases available, and various accessories are included. Dismantling and loading are the responsibility of the buyer; we will only disconnect the machine from the power supply. If you have any questions or require further information, please feel free to send us a message by email.

Condition: used, functionality: fully functional, machine/vehicle number: Línea completa etiquetas, COMPLETE DIGITAL LABEL PRINTING AND FINISHING LINE The line includes: • Alca Mida 250 TRE Roll-to-roll finishing line for adhesive labels with die-cutting, cutting, rewinding, embossing, and UV varnishing. • BizPress 13R High-resolution LED toner CMYK digital label printer, ideal for short, medium, and variable data runs. Kdjdey Uddvjpfx Abfen • SMAG E-CUT S330 Professional finishing and converting system for labels with laminating, semi-rotary die-cutting, longitudinal cutting, and rewinding. • LabelCut R20s (ROTUTECH) Inspection, cutting, and finishing system for professional label production. Complete line ready for professional adhesive label production. Ideal for: - label manufacturers - printing companies - industrial production - short and medium runs - variable data and personalization The machines are in very good working condition and can be seen in operation. Location: Spain For more information, videos, or additional photographs, please contact us.

Condition: used, Year of construction: 1991, pressure 400 t stroke 300 mm table surface area 1200 x 700 mm ram surface 1200 x 700 mm dayligth 500 mm adjustment of stroke 300 mm return capacity 348 kN capacity of ejector 100 kN ejector stroke 100 mm control SIEMENS Simatic S 5 total power requirement 65 kW weight of the machine ca. 28 t dimensions of machine L x W x H 4,4 x 2,75 x 4,0 m = hydr. punching and embossing press Accessories: tool changing table - with cutting shock absorption damping force 4000 kN Kjdpjtqqlcefx Abfjdn damping stroke 5 mm spindle adjustment 200 m

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Gietz FSA 790 EFF high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Max format 790 x 560 mm : max speed 6,000 sheets / hr High speed MABEG suction feeder : 6 heating zones : 3 x electronic servo longitudinal foil feeds : 3 line hologram capability : Full impression and register tested before supply Kedjy T Ngtopfx Abfedn Carries distributor's warranty

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, The line includes: - Main extruder: BA130 (Cobra), year of manufacture 2008 - Co-extruder: CM65, year of manufacture 2008, sold for parts - Embosser, cooling tank, nailer, puller, perforator, guillotine – all year of manufacture 1996 TECHNICAL DATA – BA130 Extruder (Cobra) - Main screw: Ø130 mm, length 26 L/D - Center distance: 1050 mm - Screw material: XALOY 41CrAlMo7, hardness 1000 HV - Gearbox: 1:31:7 R - Thrust bearing: 2 020 000 N - Barrel heaters: 74.6 kW (7 heating zones, 6 cooling zones) - Main motor: 205 kW, 1460 rpm - Degassing: pump 4 kW, 100 m³/h, vacuum 700 Hg - Feeders: 2x motor 2.2 kW, ratio 1:25:4 R, screw speed 112 rpm Ksdpfxoyc Rtxj Abfodn Technical condition: The line is operational and ready for production The configuration allows for the complete siding production process – from granulate to finished profile Individual price quotation and on-site machine demonstration available.

Condition: refurbished (used), Year of construction: 2005, MPS EF 330-8 COLOR FLEXO label press machine Labelpress was completely overhauled in May 2024 by MPS! Equipment:  Age: 2005  Web width: 330mm  Unwind Corona Treatment  New BST web guide (Camera)  Teknek two-sided web cleaner  8 x servo driven flexo units  8 x GEW UV dryers (E2C)  Embossing Cylinder Die Cutting  Rewinders  Without tube scan  With possibility of buying Type MEDESA III/320, Age: 2004 for Label punching, we can send offer with separately mail.  Mechanical speed: 5-200m/min  Web tension maximum: 600n/cm  Substrate thickness: 20-350micron  Maximum diameter unwinder: 800mm  Maximum diameter rewinder: 800mm  Unwind and rewind expandable shafts: 76mm, 3inch Kdodjwh Sp Topfx Abfon Accessories:  9 x Anilox rollers  127 x printing cylinders  9 x Magentic cylinder  Spare parts

Year of construction: 2019, condition: used, Used machine Year of manufacture: 2019 - One print bed with a format of 2500 x 1300 mm or 2500 x 3100 mm (model 2531) - High speed: Prints up to 25 m²/h or up to eight sheets/h (color configuration 4C) in 2440 x 1220 mm format, and up to approx. 12.5 m²/h (color configuration 4C+W) with simultaneous white printing - New ink supply system: The 1-liter ink bottles can be easily replaced from the front — refilling is much faster! - Simple operation — no alignment issues: Equipped with alignment pins and a printed measuring scale for precise media positioning on the print table. The register pins secure the media against shifting. The measuring scale makes it easy to adjust layout and RIP data to the exact position. - Increased flexibility with direct print on thick media: Prints on boards up to 50 mm in thickness - Reduced banding thanks to Mimaki Advance Pass System - Special Mimaki circulation system prevents settling of white ink - Mimaki Clear Control (MCC): For glossy surfaces — to avoid dust adhesion and the formation of small air bubbles, MCC simultaneously reduces ink drying time and UV light exposure. This enables both glossy and stylish matte finishes. In addition, multiple layers of clear varnish can be applied for embossed, multidimensional effects. - Convenient ink options: - LH-100 rigid UV inks for all smooth surfaces with high scratch resistance, color brilliance, and solvent resistance - LUS-150 flexible UV inks for smooth and uneven surfaces, approximately 150% stretchability, making them suitable for a wide variety of substrates - White ink for image backing reduces light transmission - Two-layer printing with white on clear and colored substrates - Print finishing with gloss or matte varnish options - Environmentally conscious printing: No harmful emissions due to UV print technology. Lower power consumption and longer lifespan thanks to UV-LED lamps - RasterLink 6: - Powerful RIP supports outstanding color reproduction - Various print jobs can be easily nested Kdjdjy Nugqopfx Abfsn - Simple and user-friendly interface - Intuitive icons help with quick orientation - Thematically related RIP settings are grouped in a single window and can be saved as favorites for repeated use - The print process is monitored directly in the main window - Software can be updated at any time via the internet, and profiles can be downloaded or updated. Printing method: Piezo inkjet Print heads: 2 heads in staggered arrangement Max. print format (W x L): 2500 × 1300 mm Max. media size (W x L): 2500 × 1300 mm Max. media thickness: 50 mm Max. media weight: 50 kg with even weight distribution Print resolutions: 300, 450, 600, 900, 1200 dpi Media hold-down: Vacuum Number of vacuum zones: 2 sections (on the X-axis) Accuracy (absolute): ± 0.3 mm or ± 0.3% of the specified distance (the larger value applies) Repeatability: ±0

Year of construction: 1990, condition: used, functionality: fully functional, For sale is a robust and fully operational roll forming machine for the production of corrugated and tile-profile sheets made of aluminum. The system is suitable for the continuous production of various profile geometries. The machine was commissioned in October 1990 at Leichtmetallwerk Nachterstedt GmbH and impresses with its solid industrial design. Thanks to the integrated profiling line, the cutting and embossing tool, and the automatic stacking device, an efficient production process is possible, from the coil to the finished profile. The system is particularly designed for the production of roofing profiles, tile profiles, and aluminum corrugated profiles, thus offering a versatile range of applications in the field of sheet metal processing and profile manufacturing. System components: - Coil - Profiling line - Cutting and embossing tool Kdedpfx Absy Sxhwjfsn - Automatic stacking device Currently produced profiles: - Tile profile 33/175; material thickness: 0.6 mm - Asymmetrical corrugated profile 33/175; material thicknesses: 0.6 mm and 0.7 mm - Aluminum corrugated profile 28/125; material thicknesses: 0.7 mm, 0.8 mm and 1.0 mm Condition & Inspection: The system is ready for production, is in fully operational condition, and is currently still used for production. This allows the functionality to be verified on-site if desired. The roll forming machine can be inspected at any time by arrangement at our location in Krostitz, Hilchenbacher Straße 2A. The system is immediately available and ready for sale. We will gladly provide further technical information, images or details upon serious interest.

Condition: new, functionality: fully functional, Thick turret punch tool for Amada, Lvd, Finn-power, Euromac, Yawei, JFY Kdedpfx Ajiq Di Ajbfen Original style punch compatiable for Amada/Mate guide holder Quick adjustable style compatiable for Mate/Wilson 90 guide holder Standard shape as Round, rectangle, Square, Ob-long, triangle Special shape, emboss tool, countersink tool, lance & form tool, bridge tool, louvre tool, blank out tool, dimple tool, etc.

Condition: used, Year of construction: 1976, machine/vehicle number: 193, For sale: Kolbus PE machine – automatic stamping/foil blocking machine. The machine is designed for embossing hardcover PU materials used in diaries, notebooks, and books. It operates in an automatic cycle: cover feeding, positioning, embossing, and removal. The machine is equipped with a system that allows stopping in the upper position, enabling blind (dry) embossing with material discoloration. Year of manufacture: 1976, rebuilt in 2012. The machine is connected and operational; testing is possible. Actual working speed for blind embossing – 18 units per minute. Includes many additional components – suction cups, markers, etc. The sample video does not depict the machine for sale. Ksdsx Rcgnspfx Abfodn

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 70,119 h, machine/vehicle number: A0111A0021, controller model: TruControl 1000, laser source model: Festkörperlaser, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, Equipment: CE marking, safety light barrier, TECHNICAL DETAILS Working area: 2,500 x 1,270 mm Parts flap: 300 x 500 mm Clamping claws: 2 units Laser Kdjdpfx Ajy R Uatobfjn Solid-state laser: TruDisk 3001 LLK outlets: 1 unit Fiber optic cable: 10 m Cutting head Lens focal length: 200 mm MACHINE DETAILS Operating hours Laser on-time: 70,119 h Total operating hours: 73,936 h Control Laser control: TruControl 1000 Screen size: 15" EQUIPMENT Robust, easily accessible C-frame Precision linear guide system for high-accuracy processing Linear magazine including 2 clamping claws Maintenance-free drives Repositioning device with programmable hold-down Brush tables Good parts container Chip bin Enclosed beam guidance via fiber optic cable ContourLine FocusLine NitroLine Chiller unit Diode-pumped excitation for long service life Upgradeable for up to 3 additional LLK outlets Quick-change cutting head system ControlLine Electro-hydraulic punching head Programmable hold-down plate Tool length compensation Punch lubrication spray Slug extraction system Open control based on Bosch PNC-P Control panel with TFT color display Teleservice via Internet Automatic shutdown USB port Network connection CE marking Multi-beam light barriers Laser source safety monitoring system Quick disconnect for hydraulics Scatter radiation protection Additional LLK outlet for operation with Trumpf system MultiTool function MultiBend function Thread forming function Marking / fast embossing function Roller and deburring technology function Softpunch function Adaptive stroke calibration Spray lubrication for die Additional clamping claw Individually opening clamping claws Height-adjustable clamping claws Automatic clamping claw closing Repositioning cylinder with height-adjustable pressure pieces Sensor for parts chute Loading/unloading aid for brush tables Vibration-damped foundation Chip conveyor with tilting bin Liftable brush segment Parts conveyor belt

Condition: ready for operation (used), Year of construction: 2001, punching force: 31 t, sheet thickness (max.): 5 mm, CNC punching machine manufactured in 2001. This Salvagnini S4-40 features a maximum sheet size of 4064 x 1524 mm and can process materials up to 5 mm thick, including mild steel and aluminum. It includes a versatile H-type punching head with multiple stations for efficient operation. If you are looking to get high-quality punching capabilities, consider the Salvagnini S4-40 machine we have for sale. Contact us for further details. • Punching head: H-type • 40 stations – 70 kN • 4 stations – 120 kN • 2 rotating stations – 120 kN • 2 lower embossing stations (tonnage to be confirmed) • Sheet capacity: • Maximum sheet size: 4064 x 1524 mm • Minimum finished part size: 250 x 80 mm • Material thickness capacity: • Mild steel (410 N/mm²): 3.5 mm • High strength steel (600 N/mm²): 2.0 mm • Aluminium (260 N/mm²): 5.0 mm • Stainless steel: 3.5 mm • Processable material strength: • 600 N/mm² at 2 mm thickness • 410 N/mm² at 3.5 mm thickness Kdedpfxjy H I Ate Abfsn • 260 N/mm² at 5 mm thickness • Electrical data: • Voltage: 400 V • Frequency: 50 Hz • Installed power: 79 kVA • Nominal current: 114 A • Compressed air: 6–12 bar required pressure • Nominal punching force: approx. 300 kN / 30 tons (to be confirmed; exact official records/nameplate data not available) • Recorded hours: 53,019 h (2025 service report) Additional equipment • Loader magazine: MD4015