Used Bernardo Kf 60 for sale (21,191)

Condition: excellent (used), CATALOG NUMBER 7503 TECHNICAL DATA: - Max. planing width: 610 mm - Max. two-sided planing height: 200 mm - Max. four-sided planing height: 100 mm Top section: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed roller - Pawls - Pressure beam - 2 toothed feed rollers - Pressure beam - 610 mm, 4-knife planing shaft, 7.5 kW - Pressure beam - Smooth metal feed roller - Pressure beam - Profiling shaft, 7.5 kW - Pressure beam - Rubber feed roller Bottom section: - Planing shaft, 35 mm diameter, 130 mm shaft length, 2.2 kW - 2 guide rails - Infeed table - Smooth feed roller - 610 mm, 4-knife planing shaft (equipped with 2 knives), 7.5 kW - 2 smooth feed rollers - Divided metal slip roller - Side pressure roller Rear section: - Side spindles + 2 pressure units - 1) Right vertical 95 mm, 4 kW - 2) Left vertical 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Extraction connector diameters: 3×120 mm, 3x160 mm - Dimensions (L x W x H): 3150 x 1900 x 1600 mm - Weight: approx. 3,500 kg ADVANTAGES: – The best wide planer for wet and dry wood Dksdeyz Sfbopfx Aiwjl – Perfect for processing beams, flooring, etc. – Additional profiling shaft and planer shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, very good condition Net price: 66,900 PLN Net price: 15,930 EUR (exchange rate: 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7303 TECHNICAL DATA - Cutterhead width: 640 mm - Number of knives: 3 pcs - Max. thickness of workpiece: 250 mm From above: - Pawls - Toothed, feed-in roller - Hold-downs - Planing shaft - Hold-downs - Smooth, feed-out roller From below: - Adjustable rollers on lower table: 2 pcs - Motor: 7.5 kW - Electric table lift - Lift motor: 0.75 kW - 4 feed speeds - Feed motor: 1.5 kW - Extraction port diameter: 140 mm - Dimensions (L/W/H): 1120x1250x1680 mm - Weight: 1033 kg – Made in Poland – Used thickness planer, very good condition Original photos Dksdpfx Aeymm Hcjiwsl Net price: 21,900 PLN Net price: 5,200 EUR (conversion rate 4.2 EUR) (Prices may change due to exchange rate fluctuations)

Condition: excellent (used), Catalogue no. 6815 TECHNICAL DATA - shaft width: 640 mm - number of knives: 4 pcs - max workpiece thickness: 230 mm top side: - toothed feed shaft, driven, sequential - pressure rollers - planing shaft Dksdpfjytd A Uex Aiwjl - pressure rollers - smooth outfeed shaft, driven bottom side: - feed roller + infeed table - adjustable roller in lower table - outfeed table + roller - main motor: 5.5 kW - stepless feed speed adjustment - feed motor: 0.5 kW - extraction port diameter: 150 mm - dimensions (LxWxH): 1630x1630x1140 mm - weight: 920 kg FEATURES - Italian-made - used thickness planer, in very good condition Net price: 17,900 PLN Net price: 4,260 EUR Net price calculated at 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 6935 TECHNICAL DATA - Shaft width: 630mm - Number of knives: 4 pcs Dodpoytd Uqefx Aiwekl - Max. thickness of workpiece: 210mm * Top section: - Anti-kickback fingers - Serrated feed roller, driven - Pressure bars - Planing shaft - Pressure bars - Smooth outfeed roller, driven * Bottom section: - Adjustable rollers on the lower table: 2 pcs - Motor: 4.4kW - 2 feed speeds - Dimensions (L/W/H): 1220x950x1060mm - Weight: 750kg ADVANTAGES – Made in Germany – Used thickness planer, very good condition Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may vary in case of significant currency fluctuations)

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70mm - tank diameter: 1200mm - output: approx. 70kg/h - fully automatic machine operation - motor: 7.5kW - max working pressure: 150 bar - suction outlet diameter: 90mm - filter bag opening diameter: 500mm Dkedjyfhiiepfx Aiwol - max bag height: 900mm - dimensions (LxWxH): 1950x1400x2700mm - weight: 1130kg ADVANTAGES - Italian-made - direct connection to sawdust extraction possible - used briquetting press - operating & maintenance documentation (DTR) - condition: very good Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7640 ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm - From above: - Powered feed roller, toothed - Pawls - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller Dodpoyaq Taofx Aiwekl - From below: - Side pressure at infeed - Guide rail - Infeed table - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Condition: used, mileage: 369,231 km, power: 265 kW (360.30 HP), first registration: 07/2009, fuel type: diesel, empty load weight: 10,300 kg, maximum load weight: 8,700 kg, overall weight: 19,000 kg, axle configuration: 4x2, wheelbase: 3,900 mm, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, crane, cruise control, onboard computer, parking heater, power assisted steering, * Atlas crane foldable behind the cab * Type: TLC 165.2E * Radio remote control * Hook height: 15.60 m * 2.90 m = 4.76 t. * Length: 12.60 m = 780 kg * 10.60 m = 990 kg * 8.60 m = 1,300 kg * 6.70 m = 1,900 kg * 4.80 m = 2,900 kg * Four hydraulic extensions Dkjdevhpirepfx Aiwol * 2 hydraulic outriggers * Long-distance cab with one sleeper berth * 8-speed split manual transmission * Multifunction steering wheel * Cruise control * Engine brake * Air conditioning * Auxiliary heating * Comfort driver's seat, air suspension * Electric windows * Heated electric mirrors * Central lubrication * Working headlights * Steel bumper * Suspension: leaf/air with lifting and lowering * Mounting height: 1,300 mm * Wheelbase: 3,900 mm * GVW: 19,000 kg * Unladen weight: 10,300 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: new, width of the strips 100 mm band length 2000 mm band speed 15 + 30 m/sel tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad Dust suction hood 2 x 75.0 mm motor speeds: 1420 / 2660 Upm. face grinding attachment 400 x 100 mm total power requirement 2.5 / 3.3 kW weight of the machine ca. 148 kg. range L-W-H 750 x 1400 x 1200 mm Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt - Large plan grinding surface with protective cover - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding rollers without tools - Various grinding angles from 30 ° to 90 ° are possible without any problems - Shorter processing times compared to milling scope of delivery - Sanding belt K 36 - Rubberized sanding roller - 1 piece sanding roller for 1 1/4 "pipe (42/44 mm pipe) - 2 pcs. Hinged protective panels - Sanding and support table - 2 x dust extraction nozzle diam. 75 mm Dedpfx Aioxab Dzjwskl - 2 pieces of chip collector - graphite coating - Motor protection switch

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,927 kg, axle configuration: 3 axles, first registration: 04/2019, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Loading capacity 33 / 66 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Dodpfx Aioy Dfzhewskl Approximate own weight - 8 710 kg 3 axles Pallet rack for 36 Euro pallets

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,927 kg, axle configuration: 3 axles, first registration: 11/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Loading capacity 33 / 66 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 710 kg Dkjdpfey Dft Rox Aiwel 3 axles Pallet rack for 36 Euro pallets

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,927 kg, axle configuration: 3 axles, first registration: 08/2018, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2018, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - Schmitz Rotos Full air suspension Insulated rear doors with 4 steel lockrods, TAPA - door Lock FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS Djdpfxey Dfuuj Aiwskl ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Internal Length/width/heigth - 1341cm/246cm/265cm Max weight - 42 000 kg Own weight - 8 927 kg 3 axles Pallet rack for 24 Euro pallets

Condition: used, mileage: 1,200,000 km, power: 353 kW (479.95 HP), first registration: 05/2010, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 04/2027, brakes: retarder, color: white, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Equipment: crane, If interested, please contact Mr. Leible directly at Scania G480 LB8X44HNB – Crane and Radio Remote Control VIN: 5236394 Chassis / Attachments: * Wheelbase: * Full air suspension * Tyres: front: 385 R22.5 / rear: 315 R22.5 * 1 x diesel tank Cab: * Long-distance transport * Highline CR19 Superstructure: * Palfinger PK60002 * 6 extensions, approx. 16.5m outreach, cable winch * 4-point support * Radio remote control * Operating hours: 4,351h Engine / Transmission: * 12,740 ccm // 480 HP / 353 kW // EURO 5 * Manual gearbox * Retarder * EGR without AdBlue Weights: * Gross vehicle weight: 32,000 kg * Unladen weight: 22,800 kg * Payload: 9,200 kg Other: * UVV 08/2026 * SP 10/2026 * Inspection (HU) Dksdpsyai E Uofx Aiwol New main (general) inspections / safety checks or weight reductions/upgrades available on request. We are happy to assist you in obtaining export/transfer number plates, and we can also arrange vehicle transfers within Germany. Please contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing and typing errors. Subject to changes, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in the preparation and marketing of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On an area of 11,000 m² you will find a large selection of vehicles. Our company philosophy is characterized by fairness and integrity. Customer satisfaction is extremely important to us, which is why we offer our customers an excellent all-round service package and provide them with a competent contact person to assist with the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We are happy to assist you with loading your purchased vehicles. Organization of special transports We are happy to assist you in organizing special transports. Temporary/export number plates We are happy to help you obtain export or short-term plates. Handling customs formalities We are happy to help you with customs procedures.

Condition: used, Year of construction: 1996, machine/vehicle number: -, functionality: fully functional, operating hours: 50,000 h, input voltage: 400 V, input current: 120 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 12,000 mm, travel distance Z-axis: 400 mm, workpiece width (max.): 2,000 mm, number of axes: 3, overall weight: 35,000 kg, year of last overhaul: 2024, Hello, I have for sale a granite slab polishing line by Breton, as shown in the photos. The line is equipped with 17 heads and is fully operational following a complete overhaul, featuring a new belt, new software, four tables, and a slab dryer at the exit table. Upon purchase, we will demonstrate the machine in operation. We offer the machine with pre-set processing parameters and expertise for achieving a perfect polish, along with access to a proven service team that handled its overhaul. The machine is ready to start work immediately after installation. For any questions, please contact me by phone or email. Dksdpfxjy Ewnis Aiwel

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 1650-750-550 IR600 70° right RA1441 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Dodpfxjk Abazs Aiwokl Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 1650 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optional Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Characteristic / Accessories: Lateral guides included on both sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm spiral helix belt curve conveyor left 85°-775-550 IR600 RA1658 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 Conveyor length middle radius (NL): 1703 mm frame width (NB): 775 mm belt width (GuB): 550 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 85° degrees (coiled 175mm rising) Incline: 175 mm / 85° = 741,2 mm / 360° Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gearmotor SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) year of construction: 2001 Optionally available: Dodpek Abfbjfx Aiwekl Supports Side guide one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Transnorm Belt Curve Conveyor left GKF 90°-780-600 IR600 both sides transmission RA2019 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Djdpok Abufjfx Aiwskl Technical data: Frame width (NB): 780 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 90° degrees support feet: optionally available Conveying speed (v m/s): Depending on the following band, please contact us Drive:no motor, both sides Transmission possible, two belts one Motor Scope of delivery: without supports Optionally available: Supports Side guides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1999, Transnorm belt curve conveyor left GKF 180°-775-600 IR500 RA2013 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and Side guides are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Type designation: Belt curve conveyor TS 1600-105 Frame width (NB): 775 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 500 mm Conveying angle: 180° degrees support feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor SA37 DT80N4/MM07/BW1 Dsdpfxjk Abc So Aiwskl Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Belt: will be changed Year of construction: 1999 Special feature / Accessories: Lateral guides included on both sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1999, Transnorm spiral helix belt curve conveyor left 90°-775-600 IR600 RA2008 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 frame width (NB): 775 mm belt width (GuB): 600 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 90° degrees (coiled 191mm rising) Incline: 191 mm / 90° = 764 mm / 360° Support feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gearmotor SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) year of construction: 1999 Optionally available: Supports Side guide one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Dkjdpfok Abtpex Aiwel For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 70° degrees-770-600 IR600 RA1415 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length middle radius (NL): 1100 mm Frame width (NB): 770 mm with Motor 940 mm belt width (GuB): 600 mm Dkjdpfx Ajk Abf Ueiwjl height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): 0,8m/s, frequency converter for an additional charge Drive: SEW gear motor SA47/T DT80N4 Electrical data: 50Hz V220-240, kW 0,75 / S1 Year of construction: 2001 Special feature / Accessories: Lateral guides included on one sides Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2000, Transnorm belt curve conveyor left GKF 70°-730-600 IR600 Djdpfxsk Ablps Aiwokl RA1936 The Transnorm belt curve is fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 730 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): freely adjustable with frequency converter between 0,032 and 1,17m/s, Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2000 Scope of delivery: without supports Optionally available: Supports Side guide one- and both sideds Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), functionality: fully functional, overall weight: 550 kg, Metal band saw Bandsaw machine Bandsaw Saw (used) Manufacturer: Bernardo Model: MBS 350 DG Cutting capacity: see photo Blade dimensions: 2925 x 0.9 x 27 mm Blade speeds: 36 / 72 m/min Total power: 2.2 kW Weight: approx. 550 kg Space requirement: L 1200 mm x W 700 mm x H 1400 mm Coolant system Saw pressure hydraulically steplessly adjustable Mitre device 45° / 60° Including roller conveyor with 4000 mm measuring scale and 2170 mm infeed The machine is in good condition and ready for immediate use. Dkedpjylbkmjfx Aiwel Forklift available, free loading onto truck Affordable shipping possible Machine location: 48477 Hörstel

Condition: used, mileage: 253,480 km, power: 265 kW (360.30 HP), first registration: 02/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), AROCS – GERMAN VEHICLE REGISTRATION CERTIFICATE, 6X4, AIR-SUSPENDED REAR AXLES, SUN VISOR, BEACON LIGHTS, WHEELBASE 3.60M, ELECTRIC WINDOWS/MIRRORS, SEAT/MIRROR HEATING, REVERSING CAMERA, AUTOMATIC TRANSMISSION, ENHANCED ENGINE BRAKE, DIFFERENTIAL LOCKS, ABS, ASR, WORK LIGHTS, TOOLBOX, ADJUSTABLE REAR UNDERRUN PROTECTION, HYDRAULICS TO THE REAR, AIR CONDITIONING, HOOKLIFT HIAB MULTILIFT XR21S46, SLIDING HOOK, HYDRAULIC CONTAINER LOCK, GOOD TYRES, 21 TON CAPACITY. Dodsym N H Sepfx Aiwskl

Condition: new, Bernardo fully automatic double column bandsaw BSM 330 NC Pro Technical specifications Cutting range round: 90° 330 mm Cutting range flat: 90° 330 x 330 mm Cutting range square: 90° 330 x 330 mm Working height: 635 mm Cutting speeds: (NC PRO) 20 - 80 m/min Saw blade dimensions: 4115 x 34 x 1.1 mm Coolant pump: 0.135 kW Hydraulic pump motor power: 0.75 kW Motor power: 4.0 kW Machine dimensions: (LxDxH) 2520 x 2280 x 1630 ( depth: 3690 with feed roller conveyor) Weight approx.: 1990 kg Scope of delivery: - Saw band - Hydraulic vice, - Pressure gauge for band tensioning - Hydraulic saw band tensioner, - Hydraulic workpiece feed - Hydraulic workpiece feed, - Chip conveyor (NC Pro) - Coolant device, - Hydraulic lowering cylinder - Work light, - Delta frequency inverter (NC Pro) - Delta frequency inverter (NC Pro,) - Motor protection switch Dodpfsqzhxisx Aiwokl - Motor protection switch - Automatic limit switch - Cutting pressure regulation - PLC control Delta - Automatic belt breakage control - Hydraulic bundle tensioning device - Feed roller conveyors

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° turning speeds 4800 U/min voltage 230 Volt engine output 0.12 kW weight 8.6 kg range L-W-H 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: Dedpfx Aioxablxowokl - CBN grinding wheel - ER 20 collets, 3 - 12 mm * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) - ER 25 collets, 14 - 20 mm * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20 or ER 25

Condition: new, square edge steel 16 x 16 mm flat steel 100 x 5 mm L-beam 60 x 8 mm round bar steel 18.0 mm weight of the machine ca. 33.0 kg Dkodpfx Ajxcux Reiwjl Properties : - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop with locking pin - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - - - - - - Cold bending capacity Flat steel 100 x 5 mm 65 x 10 mm Round steel 18.0 mm Square steel 16 x 16 mm Angle steel 60 x 8 mm Bending capacity hot Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 12 mm - - - - - - - - - - Scope of delivery: - Bending plate sharp / round - Radius bending plate R 20 / R 25 - Offset block - Bending plate for round bar - Offset plate - Radius bending plate R 10 / R 15 - Angle stop - Clamping block with eccentric clamp - Material stop