Used Behringer Hbp 260A for sale (120)

Condition: used, Year of construction: 2008, Behringer Eisele HCS 150, year of manufacture 2008, feed magazine, cut-off disposal. The machine is operational and can be purchased in its current condition or fully reconditioned by us including assembly. Type: HCS 150 Machine number: Type no.: 49600H0024 Year of manufacture: 2008 Weight: 4,500 kg Required space: 9.3 m x 7.5 m Control: Siemens PLC control Round material (max.): Ø 150 mm Flat material (max.): □ 135 mm Saw blade feed: 0.5 - 40 mm/min Compartments incl. roller conveyor: 11 units Single compartment load: max. 500 kg at 3 m bar length Total load capacity: 4,000 kg Conveyor manufacturer: Geppert Conveyor length: 1,500 mm Knjdpfxjxpd D Ns Anuoc Conveyor width: 400 mm Conveyor speed: 6.3 m/min Total power requirement: approx. 34 kW Voltage: 400 V Air connection: 6 Bar

Year of construction: 2024, condition: new, We sell chip brushes for the common machine types for Behringer and Kasto sawing machines. Minimum order quantity 20 pieces. We are happy to answer your inquiries. Kjdpfotp T N Usx Anusnc

Condition: new, power: 5.2 kW (7.07 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 410 mm, cutting width (max.): 510 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 10 rpm, total height: 2,220 mm, total length: 2,000 mm, total width: 2,850 mm, overall weight: 3,200 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, Advantages of the HBE411A Dynamic bandsaw automaton Band guide components made of gray cast iron are manufactured by Behringer and ensure vibration damping directly at the cutting interface. This allows for a noticeable increase in the service life of the saw blades. Knedpfx Aez Rwx Isnuec Auto-Feed Control Selection of the material to be cut from an extensive material database. The AFC automatically calculates the optimal values for saw feed rate and cutting speed. Energy efficient The use of modern drives and a special hydraulic system reduces energy consumption by approximately 30% compared to the previous model. Precise guide system in portal design The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best cutting results and a long service life for the bandsaw. Electrically driven chip brush with Behringer quick-change system for tool-free brush replacement. Due to the special engagement angle, the teeth of the saw blade are protected. Servo feed system The saw feed is carried out by means of a ball screw and a servo motor. This results in significantly shorter non-productive times and more precise saw feeds. Your advantage: higher cutting performance and longer blade life! Automatic guide arm adjustment This provides optimal sawing results without any adjustment effort - even with frequently changing material widths. Easy operation Quick and easy operation of all functions of the bandsaw via touch control. Double clamping device offers process reliability – especially when sawing packages or in single cuts. The clamping jaws are arranged on the infeed and outfeed side of the bandsaw and fix both the initial material and the sections that have just been cut.

Condition: new, power: 5.2 kW (7.07 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 320 mm, cutting width (max.): 350 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 10 rpm, total height: 1,820 mm, total length: 1,850 mm, total width: 2,300 mm, overall weight: 1,900 kg, table height: 800 mm, section length (min.): 10 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, Advantages of the HBE321A Dynamic bandsaw automat Band guide parts made of gray cast iron are manufactured by Behringer and ensure vibration damping directly at the cutting interface. This noticeably increases the service life of the saw blades. Servo feed system The saw feed is controlled by a ball screw and a servo motor. This results in significantly shorter cycle times and more precise saw feeds. Your advantage: higher cutting performance and longer band service life! Precise guide system in portal design The combination of a stable, low-vibration saw frame and the linear guide system in portal design ensures the best cutting results and a long service life for the bandsaw. Auto-Feed-Control Selection of the material to be cut from an extensive material database. The AFC automatically calculates the optimal values for saw feed and cutting speed. Kodpfx Anez Rwitouenc Electrically powered chip brush with a Behringer quick-change system for tool-free brush replacement. Due to the special engagement angle, the teeth of the saw blade are protected. Sensitive Behringer cutting pressure control increases cutting performance when sawing tubes and profiles, as it automatically adjusts the saw feed of the metal bandsaw to the changing material cross-sections. Due to its arrangement directly at the back of the saw blade, the system regulates quickly and precisely. Automatic guide arm adjustment This ensures that the metal bandsaw provides optimal sawing results without any adjustment effort - even with frequently changing material widths. Energy-efficient The use of modern drives and a special hydraulic system reduces energy consumption by approx. 30% compared to the previous model. Easy to operate Quick and easy operation of all functions of the metal bandsaw via touch control. Double clamping device offers process reliability, especially when sawing packages or in single cuts. The clamping jaws are arranged on the infeed and outfeed side of the metal bandsaw and fix both the raw material and the sections that have just been cut.

Condition: new, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 600 mm, cutting width (max.): 620 mm, control type: PLC-controlled, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 3,120 mm, total length: 2,900 mm, total width: 2,750 mm, overall weight: 3,200 kg, table height: 1,150 mm, Equipment: CE marking, documentation/manual, lighting, motor brake, Advantages of the LPS-T band saw Unsurpassed precision and cutting performance High cutting accuracy, smooth running, and long blade life are due to the special, torsion-resistant design of the saw frame. Unique feature: the force application of the saw feed is located directly below the cutting point. Servo feed system The use of the Behringer servo feed system ensures a constant chip removal rate and makes better use of the capabilities of modern saw blades. The rapid response of the servo feed system to the sensors of the cutting pressure control consistently prevents overloads and premature wear of the saw blades. Chip conveyor as standard Below the saw unit, directly in the direction of chip flow, there is a large chip conveyor with an integrated coolant tank. The chips and coolant generated are collected and separated in this tank. For cleaning and maintenance work, the conveyor can be moved out of the machine frame. Kjdpfx Ansz Rzg Asuonc Adjustable material support table For easy loading and unloading using a crane, the material table under the saw unit can be moved out. NC measuring device Optionally, the LPS-T band saw can be equipped with an NC-controlled measuring device. The cutting depth is digitally pre-programmed in the control panel. The material to be cut can be quickly aligned on the measuring device when placed and then securely clamped. This significantly speeds up the setup process. Fast blade change ensures the shortest setup times. In just two to three steps, the saw blade can be brought into the change position. Blade guide parts made of cast iron are made by Behringer and ensure vibration damping directly at the cutting point, thus increasing the tool life. Compact Due to its compact dimensions, the band saw can be installed even in confined spaces. Driven duplex chip brushes effectively clean the saw blade, thereby increasing the tool life. The brushes are automatically adjusted to the saw blade and ensure consistent cleaning performance.

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Ksdsu Niuzopfx Anujnc Saw blade feed speed adjustable Without coolant system *

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Knsdpfxegb Eg Hs Anusc -Hydraulic cylinder: from automatic band saw Behringer HBP -Piston rod: Ø 22 mm -Stroke: 445 mm -Admission piston rod: M12 -Dimensions: 605/100/H85 mm -Weight: 8.7 kg

Condition: good (used), Year of construction: 1989, machine/vehicle number: 0172, Offer 25286 Technical specifications: - Saw blade dimensions: 400 x 35 x 2.0 mm - Cutting range - 90° round: approx. 252 mm - flat: approx. 250 x 160 mm - square: approx. 210 x 210 mm - 45° round: approx. 160 mm - flat: approx. 150 x 150 mm - Automatic material feed - Max. vise opening: 265 mm – miter-adjustable vise - Coolant system - Drive: 400 V / 0.65 / 1.6 kW - Required space: approx. W 1400 x H 950 x D 1700 mm - Weight: approx. 600 kg Knsdpfx Aew Ei Tdjnusc

Condition: used, Year of construction: 1982, Cutting height ca. 280 mm cutting width ca. 280 mm Kedpfevwfc Hjx Anuenc Dimensions (L/W/H) 1500x700x1400 mm

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 30 mm, input voltage: 380 V, cutting speed: 6,000 mm/min, total width: 4,850 mm, total length: 10,150 mm, table length: 6,000 mm, working width: 2,000 mm, compressed air connection: 8 bar, table width: 2,000 mm, cutting current: 260 A, positioning accuracy: 0.01 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, type of cooling: water, height adjustment type: electric, input frequency: 50 Hz, Equipment: documentation/manual, double-sided, For sale: used AJAN CNC plasma cutting machine with water table. The table is filled with water to a set level and cutting takes place just above the water surface. The water captures fumes and dust and cools the workpiece, so no separate filtration system is needed. The machine is compact and takes up little floor space. The gantry has dual-side servo drive. AJANCAM nesting software is included free of charge. Kedpfx Asy Annbjnujnc ⭐️ Manufacturer AJAN Elektronik (Turkey) ⭐️ 1st Commissioned December 2015 ⭐️ Table size 2000 × 6000 mm ⭐️ Plasma power source AJAN HP 260A ⭐️ CNC control AJAN own controller ⭐️ Nesting software AJANCAM nesting software – included free of charge + free updates in future. ⭐️ Cutting currents 30 A, 80 A, 130 A, 260 A ⭐️ Max. cutting thickness quality cut up to 30 mm ⭐️ Input voltage: 380 V ⭐️ Phases: 3 ⭐️ Frequency: 50 Hz ⭐️ Torch height control automatic ⭐️ Gas control automatic ⭐️ Condition in working order ⭐️ Price 16 500 EUR + VAT ⭐️ Transport and installation 5 500 EUR + VAT (in Baltics, Finland) ⭐️ Availability immediately ⭐️ Photos, layout, attached to this post ⭐️ video on request Need more information or a formal quote? please send a e-mail or give us a call.

Condition: new, Year of construction: 2023, ! Machine offer for customers in Lithuania / Latvia / Estonia. The new high-performance automatic bandsawing machines of the HBE Dynamic series, provide performance, ease of use and energy efficiency. You can rely on accurate and fast cuts in easy to difficult to cut materials, in solids, tubes and profiles. The rigid, low-vibration saw frame in cast iron construction and the linear guide system in portal design ensure the best cutting results and maximum blade service life. By the standard servo-downfeed system with BEHRINGER cutting pressure control, the HBE Dynamic series provides short idle times and a precise saw feed movement. The standard cutting pressure control prevents overloading of the saw blade and increases the lifetime significantly. It therefore offers the best conditions for a dynamic, tool gentle sawing. Available models: - HBE261A - HBE321A Ksdpfsiy Rc Rjx Anusnc - HBE411A - HBE511A

Condition: good (used), gearing type: mechanical, Do you have gearbox damage on your Behringer or Kasto saw .....? Kedpfxotv Eyvj Anujnc We can repair or refurbish your gearbox, no problem. In some cases we can also supply you with replacement gearboxes from stock

Condition: new, Manufacturer: Behringer Eisele Type: VMS 350 Condition: NEW Machining cross section max. round at 90° 120 mm Machining cross section max. rectangle at 90° 170 x 100 mm Machining cross section max. round at 45° 120 mm Machining cross-section max. rectangular at 45° 120 x 100 mm Saw blade diameter 350 mm Saw blade width 3 mm Bore diameter 40 mm Adjustable saw blade speed 17 rpm / 34 rpm Machine head swivels 45-90-45-30° Total motor power 1.4/1.9 kW Width 900 mm Kodpfx Ansy S Eytsujnc Length x width x height 1050 x 900 x 1900 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, Used, well-maintained, fully automatic bandsaw machine "JAESPA", model: Comfort 260A Cutting range for round/square/rectangular materials: 260/260/320 x 200 mm Kjdpfx Anjz Tdk Ajuonc Band speed: 15-100 m/min, continuously adjustable via frequency inverter Band dimensions: 3660 x 27 x 0.9 mm Technical data and dimensions: Subject to change.

Condition: new, Available from stock / available in the short term! Speed: 17/34 rpm. For saw blades up to 350 mm in diameter. Kjdpfxjllvpwo Anuenc With pole-changeable three-phase motor, 1.4/1.9 kW, stationary base frame with integrated coolant system and chip drawer. Cutting range: Flat 90° 170 x 100 mm Flat 45° 120 x 100 mm Flat 30° 85 x 100 mm (only to the right) Square 90° 100 mm Square 45° 95 mm Square 30° 85 mm (only to the right) Round 90° 120 mm Round 45° 120 mm Round 30° 100 mm (only to the right) Technical data: Length 895 mm Width 665 mm Height 1750 mm Weight 300 kg Table height 900 mm Options: Roller conveyors and length measuring devices (image = example, available in manual and automated versions, upon request) We recommend our coolant concentrate, which has been tried and tested for "Eisele" saws for decades, our microspray oil (for machines with a microspray system), as well as high-quality circular saw blades and band saw blades for your specific needs. Feel free to contact us for a non-binding quote!

Condition: used, Year of construction: 1977, cutting diameter:250 mm band length:450 mm cutting speed:50/70/100/135 Hübe/min range L-W-H:2,6 x 1,8 x 1,1 mm total power requirement:3,8 kW Kjdpfxjcxxw Uo Anuonc weight of the machine ca.:1,2 t

Condition: good (used), Year of construction: 2004, functionality: fully functional, cutting height (max.): 260 mm, control type: NC control, overall weight: 1,100 kg, Equipment: lighting, Band saw machine Manufacturer: Meba Type: Meba Profiline 260-AP Year of manufacture: 2004 Control system: Meba Serial number: XXXX Technical data: ----- - Cutting range 90° round: 260 mm - Cutting range 90° rectangular: 300 x 260 mm - Cutting speed: 15 - 150 m/min (AC drive) - Drive, saw band: 1.5 kW - Scrap length, automatic: 90 mm - Scrap length, manual: 10 mm - Cutting pressure: infinitely variable / electric - Saw frame guided twice via linear guides - Material feed via controlled feed clamp ..with hydraulic material full-stroke clamping - Saw band dimensions: 3,350 x 27 x 0.9 mm - Machine weight: approx. 1,100 kg Kjdpjz Hbgajfx Anuenc Accessories: ----- - 5x saw band, new

Condition: used, Hydraulic band saw (Made in Croatia), type BS 320 Year of manufacture approx. 1980 Cutting range, round: Ø 320 mm Cutting range, square: 280 x 280 mm Saw blade: 550 x 45 x 2.25 mm Material feed height: 680 mm Knedpfxjlqadhe Anusc Saw speed: 42 - 55 - 85 - 110 strokes/min Motor power: 1.8 and 2.4 kW, pole-changing Power supply: 400 Volt, Hz - Miter adjustment up to 45° - Saw motor with 2 speeds and 2 V-belt stages - Hydraulic saw arm lowering - Hydraulic cutting pressure adjustment via throttle valve - Coolant system in the machine base Space requirement, band saw L x W x H: 1900 x 1350 x 1500 mm Width without stop: 800 mm Weight: approx. 750 kg Good condition

Condition: used, Year of construction: 2014, functionality: fully functional, ■ Infeed roller conveyor (length 6m, width 2000mm, roll diameter 159mm, roll distance 800mm, capacity 1250kg/m, including liftable datum line) ■ V320-2000 Plate processing system (base frame with vertical drilling unit, automatic tool changer and automatic discharge table) ■ Feeder trucks (servo driven, master truck with 3 hydraulic clamps, support truck with 2 hydraulic clamps) ■ Swarf brush (automatic swarf removal after drilling operations) ■ Oxy-fuel cutting torch (1 pcs, with automatic height control IHT M4000 Cap) ■ Plasma cutting unit Hypertherm HPR260XD (1 pcs, automatic gas console, complete with cutting parameter database) ■ Fume extraction unit Donaldson DFPRO6 ■ Product conveyor belt ■ Outfeed roller conveyor (length 3m, width 2000mm, roll diameter 159mm, capacity 1250kg/m) ■ Hardware and software (including VACAM ‘Machine Edition’, VACAM ‘Office Edition’) ■ Safety devices (safety fencing, light curtain, light curtain muting) ■ Year of construction 2014 Technical specifications Operating range V320-3000 Min. / max. plate length 850 – 6.100 mm Min. / max. plate width 200 – 2.050 mm Min. / max. plate thickness 6 – 75 mm Max. capacity 7.500 kg Material Mild steel Drilling unit VD40 Automatic tool changer 10 positions Feed Synchronous driven servomotor, servo-inverter Spindel rpm Step less 0 – 2.500 rpm (servomotor) Nominal power 30 kW Lubrication Internal and external by mist of air / oil Tool holder SK 40 Drill diameter 5 – 40 mm Thread tapping M6 – M24 Centre point marking possibility Yes Countersinking possibility Yes Layout marking possibility Yes Hydraulic clamping Yes Plasma cutting unit HPR260XD Max. thickness 64 mm Max. pierce capacity 38 mm Dross-free cutting max. 32 mm Knjdpjy E Nxgjfx Anuec Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / Air (99,9% pure clean, dry, oil-free) Cutting speed 6 mm Approx. 4.035 mm / min 130A 12 mm Approx. 3.060 mm / min 200A 25 mm Approx. 1.660 mm / min 260A 50 mm Approx. 590 mm / min 260A 64 mm Approx. 195 mm / min 260A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. Oxy-fuel cutting unit Type Nozzle mix Automatic height setting Yes Gas supply Magnetic valve with back-fire protection Ignition Automatically Max. thickness 75 mm Gas Propane Optional gas Acetylene Cutting gas O2 Operating direction From left to right General information Voltage stabilizer Not included Current Transformer Not included Ambient temperature 0 – 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: ready for operation (used), Mitsubishi KS-YZ21A-11 / 12KH260A control panel GEB-26194HBS for Mazak Quick Turn 8 machine, used, in good condition, 100% functional, scope of delivery as shown in the photos. Kodpfxj Aa Hl Uo Anujnc

Condition: excellent (used), Year of construction: 2012, Operating range V808 Min. / max. height 10 – 500 mm1 Min. / max. width 60 – 1.250 mm Max. positioning weight 13.200 kg Min. material length 1.200 mm Max. cutting width at the bottom 800 mm (only plasma marking and cutting) Plasma cutting unit* Hypertherm HPR260XD Virtually dross-free cutting max. 32 mm Marking lines Yes, marking and cutting with the same consumables Plasma gas mild steel O2 (99,9% pure clean, dry, oil-free) Shield gas mild steel O2/air (99,9% pure clean, dry, oil-free) Cutting speed 12 mm Approx. 3850 mm/min., 260A Cutting speed 20 mm Approx. 2170 mm/min., 260A Cutting speed 32 mm Approx. 1135 mm/min.; 260 A Fuse Additional 75 A slow is required Plasma Gas O2 (99,9% pure clean, dry, oil-free) Consumption 80l/min Kodozcfpzspfx Anuenc System pressure 10 bar * grounding, max. 6m of machine: AC power, PE, and service grounds must be connected to all equipment according to local and national codes. Oxy-Fuel cutting unit Gas supply Magnetic valve with back-fire protection Ignition Automatically Gas Acetylene Consumption 20l/ min System pressure 2 bar Cutting Gas O2 Consumption 450l/ min System pressure 10 bar Operational direction From right to left Profiles 1 Flat steel Angles European standard channels (UNP) European I-beams (IPE) European standard beams (IPN) European wide flange beams (HE) British universal beams (UB) British universal columns (UC) Square tubes 1 Small profiles have to be sufficient straight. General Voltage Stabilizer Not included Ambient temperature 0 - 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: used, Double-column hydraulic press, SMG Type HBP 200 - 2000 / 2000 Ksdpfxodzp Tcj Anuenc Manufacturer's No. 7.4117, Year of manufacture 1986 - Refurbished 2000 Clamping force 200 tons Column width at the front 2050 mm Column opening on the side 2030 mm Table surface 2800 x 2000 mm Ram surface 2000 x 2000 mm Ram stroke 700 mm Installation height max. 1850 mm Table height above floor 750 mm Ram retraction force 33 tons Rapid traverse speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety clearance 230 mm Main motor power 75 kW Control pump motor power 11 kW Power supply 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in the top dead center position - Linear encoder system with glass scale - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Adjacent control cabinet - 2-hand control panel adjacent - Floor-level installation - Central lubrication - Operating manual with wiring diagrams Space required for the press in upright position L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space required for horizontal transport L x W x H 5900 x 3250 x 2950 mm Weight 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000, the machine was used as a tool try-out press in a toolmaking company. Good condition.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 108 kg, power: 55 kW (74.78 HP), fuel type: electric, Danfoss SH1804ABE 44.5KW refrigeration compressor for sale R410 manufacturer: Danfoss year of manufacture: 2016 type: SH180B4ABE Compressor type Hermetically sealed scroll Mode Medium temperature (MBP), High temperature (HBP) Refrigerant Freon R410A Cooling capacity EN12900 44500 W Volumetric productivity 29.6 m3/h Compression volume 170.2 cm3 Power supply 3 phase / 380-420 V / 50 Hz Power factor 3.21 Maximum operating current 27.0 A Inrush current 170.0 A Oil volume 6700 cm3 Knedpfxjyhpl Ds Anujc Pressure line connection 28.6 mm Suction line connection 41.28 mm Dimensions 317.5 × 317.5 × 682.5 mm Weight 108.0 kg Displacement, cm3/rev: 170.2 Power supply: 380-400V/3 phases/50Hz Cooling capacity, kW, R410A, ARI air conditioning (To=+7.2C, Tk=+54.4C, SH=11.1K, SC=8.3K): 44.5 Oil charge (l): 6.7 Net weight (kg): 108

Condition: used, Year of construction: 1991, machine/vehicle number: 1430 91, Technical data Cutting diameter: 260 mm Kodpfx Answ Eua Aeujnc Saw band length: 3660 mm Cutting width: 0.9 mm Cutting range - square - 260 x 260 mm Feed length: 500 mm Feed length: multiple 5,999 mm Cutting speed: 17 - 106 m/min Saw blade dimensions: 3660 x 25 x 0.9 mm Saw motor: 1.5 kW Total power requirement: 2 kW Machine weight approx. 1.05 t Machine dimensions (L x W x H): 1.75 x 1.80 x 1.15 m Accessories Coolant Information according to manufacturer

Condition: used, Roller conveyor from Behringer sawing machine Heavy-duty design with geared motor; control system not included as it is installed in the control cabinet of the saw. Needs to be adapted by the customer. Length: 8750 mm Roller width: 800 mm Height: approx. 850 mm Kodpfsz At I Dsx Anusnc Needs to be adapted. Other lengths available upon request. This offer is exclusively for commercial enterprises as defined in §14 of the German Civil Code (BGB).