Used Bauer Drip Tray 25 Liters for sale (27,598)

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge on the left, one-hand operation, lockable. Laedpfx Ajzg Twajbzjg Insert shelf: stainless steel, support surface 970 x 980 + 500 mm Load per shelf max. 35 kg Total load with max. shelf configuration 100 kg Test chamber lighting: 3x halogen lamp 20 W, 12 V Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface free switching channels for on-site test specimen control Temperature range: -40°C to +180°C Rated voltage: 400V 3/N 50Hz Rated power: 10.4 kW Rated current: 17.2 A Compressor: TFH2516Z Pipe connection NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without radiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, Width 975, Depth 2200 mm External dimensions: Height 1950, Width 1290, Depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain, unpressurized, R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1m from the front) < 55 dB(A) Weight: approx. 1200 kg For your safety as a buyer, here is the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Vötsch VC³ 0034 Climate Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 0034 Machine Type: Climate Test Chamber / Climate Chamber Test Chamber Volume: approx. 335 liters For sale is a used climate test chamber from Vötsch for temperature and climate testing in laboratories, research, development, and quality assurance. Technical Data Test Chamber Dimensions: approx. 580 x 765 x 750 mm (W x D x H) Housing Dimensions: approx. 875 x 1860 x 1805 mm (W x D x H) Ljdpfx Abszgb Awjzsag Temperature Range: -10 °C to +90 °C Humidity Range: 10 to 98 % RH Dew Point Range: +4 °C to +89.5 °C Temperature Homogeneity: ±0.5 to ±1 K Temperature Deviation: ±0.1 to ±0.5 K Heating Rate: approx. 1 K/min Cooling Rate: approx. 0.3 K/min Max. Heat Compensation: approx. 200 W Refrigerant: R404A Filling Quantity: 0.6 kg ND max.: 25 bar g HD max.: 25 bar g Power Connection: 230 V / 50 Hz Rated Power: 2.3 kW Rated Current: 10 A Protection Class: IP54 Weight: approx. 490 kg Equipment SIMPAC control system Temperature and humidity control Stainless steel test chamber Ethernet, USB, RS232, RS485/422 Test item protection function Cable glands Application Areas Climate testing Temperature testing Material testing Electronics testing Quality assurance Research and development Scope of Supply Vötsch VC³ 0034 Climate Test Chamber Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures For the safety of our customers, the offered climate chambers are tested before delivery, if necessary, filled with legally compliant refrigerant, subjected to a leak test, and delivered with a documented test run. Subject to change and errors in technical data as well as prior sale.

Condition: used, Year of construction: 2007, machine/vehicle number: 4801250 / PH06 11 005, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, overall weight: 55,000 kg, year of last overhaul: 2024, clamping force: 3,000 kN, mold height (min.): 1,000 mm, plate length: 2,800 mm, plate width: 2,200 mm, Equipment: CE marking, documentation/manual, For sale is a KraussMaffei LFI shuttle mould carrier for polyurethane processing and backfoaming of large-format components. The system was designed for PU moulding and LFI applications and features a hydraulic clamping unit with a movable lower mould mounting platen. Technical data: Manufacturer: KraussMaffei Type: FT-R-H-25-20-3600.0°.65° Year of manufacture: 2007 KM order number: 39000233 Control system: Siemens S7 Clamping force: 3,000 kN Opening force: 800 kN Parallel stroke: 600 mm Mould mounting platens: 2,500 x 2,000 mm Minimum mould height: 1,000 mm Maximum mould height: 1,500 mm Maximum total mould weight: 10,000 kg Maximum upper mould weight: 5,000 kg Upper mould mounting platen pivotable up to 90° Machine weight: approx. 55,000 kg Operating voltage: 400 V Scope of supply: LFI shuttle mould carrier Hydraulic units Lodpfx Aez Dn Ixsbzsag Control unit Shuttle / traversing unit Production moulds and temperature control units are not included in the scope of supply. Extensive original KraussMaffei documentation is available, including operating manuals, technical drawings, electrical diagrams and spare parts documentation. The machine is fully functional. Inspection under power is possible by prior appointment. The machine is located in the Hamburg area, Northern Germany. The exact location will be provided to qualified prospective buyers. Dismantling, loading and transport are to be carried out by the buyer. Further technical documentation, drawings and photographs are available upon request. Subject to availability.

Condition: used, Year of construction: 2017, operating hours: 13,000 h, BAUER BG 33 H Year of Man. 2017 Base carrier Bauer BT 75 Lasdszqcuiepfx Abzjg More information upon request.

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature testing cabinet Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific test specimen control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Lsdpozg Ty Ijfx Abzjag Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: refurbished (used), Year of construction: 2019, machine/vehicle number: R-00623, load capacity: 25 kg, arm reach: 1,853 mm, controller manufacturer: R-30iB Plus, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC M-20iB/25 manufactured in 2019.07. The robot comes with an R-30iB Plus controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Ljdpfx Asz D I Thsbzsag Brand: FANUC Model: M-20iB/25 Model Number: AO5B-1226-B201 Year of Manufacture Robot: 2019.07 Warranty term (months): 12   Payload (kg): 25 Reach (mm): 1853  Repeatability (mm): ± 0.02 Controlled Axes: 6-axis Installation Type: Floor, upside-down, and angle Mount Weight (kg): 210   Controller: R-30iB Plus Year of Manufacture Cabinet: 2019.06 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: used, Year of construction: 2000, total power requirements: 2,2length of saw band: 3200cutting area width: 3200messurements (LxWxH): 2000 x 7000 x 1400weight approx.: 1500saw band dimension: 27 x 0,9Metal Bandsaw Bauer HS320GLZA Used horizontal metal bandsaw by Bauer, model HS320GLZA, year of manufacture 2000. The machine is equipped with automatic feed and is suitable for precise cutting of metal, pipes, and profiles in industrial and workshop use. Approx. dimensions: 200 x 700 x 140 cm.A roller conveyor system with a length of approx. [ 5000 mm] is included. Lsdpfjy Nuhnjx Abzoag The machine is used and located in our workshop. Viewing is possible on site. Location: 3071 Böheimkirchen, Neustiftgasse 34.

Condition: excellent (used), CTS TS-70/200-5/S Temperature Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TS-70/200-5/S Machine Type: Temperature Testing Chamber / Stress-Screening Testing Chamber Test Chamber Volume: approx. 200 liters For sale is a used temperature testing chamber from the manufacturer CTS. The testing chamber is suitable for temperature testing, stress screening, environmental simulation, material testing, quality assurance, as well as development and endurance tests. Technical Data Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 8 K/min Temperature Change Rate (Cooling): approx. 6 K/min Max. Heat Radiation at +20 °C: approx. 3500 W Test Chamber Dimensions (approx.): 650 x 400 x 750 mm (W x D x H) Housing Dimensions (approx.): 920 x 1345 x 1800 mm (W x D x H) Weight (approx.): 550 kg Power Connection: 400 V 3/N / 50 Hz Power Consumption: 10.9 kW Rated Current: 15.7 A Protection Class: IP22 Refrigerant, Pre-cooling Stage: R404A Refrigerant Quantity, Pre-cooling Stage: 2.5 kg Refrigerant, Cooling Stage: R23 Refrigerant Quantity, Cooling Stage: 0.6 kg / 15 bar Operating Pressure PS: 25 bar Test Pressure PT: 20 bar Equipment Touch panel operation Viewing window in the door Stainless steel interior Test chamber lighting Side openings as shown in the pictures Shelves / test chamber equipment as shown in the pictures Over-temperature test specimen protection Eurotherm safety controller RS232 interface Documentation / documents as shown in the pictures Areas of Application Temperature testing Stress screening Environmental simulation Material testing Electronics testing Quality assurance Research and development Scope of Delivery Laedpfxszf Hi Ho Abzeg 1x CTS TS-70/200-5/S Temperature Testing Chamber Shelves / test chamber equipment Existing documentation / documents Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Condition: good (used), Year of construction: 2000, machine/vehicle number: 73002, Offer 26172 Technical specifications: - Brush diameter approx. 250 mm - Brush width up to approx. 55 mm - 2 disc speeds Lajdpozi Srhsfx Abzog - Power supply 400 V - Working height approx. 850 mm - Space requirement approx. W 650 x H 1300 x D 500 mm - Weight approx. 85 kg

Condition: excellent (used), CTS TSS-70/130 Temperature Shock Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Machine Type: Temperature Shock Testing Chamber / Temperature Testing Chamber Test Volume: approx. 130 liters For sale is a used temperature shock testing chamber from the manufacturer CTS. The system is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, quality assurance, and research and development. Technical Data Hot Chamber: +50 °C to +200 °C Cold Chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Cycle time: < 10 seconds Temperature adjustment rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min Cooling rate: approx. 4 K/min Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K External dimensions approx.: 2335 x 940 x 1820 mm (W x D x H) Loading dimensions approx.: 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions approx.: 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight approx.: 950 kg Power connection: 400 V 3/N / 50 Hz Power consumption: approx. 16.6 kW Rated current: approx. 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant Pre-cooling Stage: R404A, 4.0 kg Refrigerant Cooling Stage: R23, 0.6 kg / 10 bar Operating overpressure PS: 25 bar Operating Requirements Water-cooled design Cooling water connection required Compressed air connection required Operation possible only with cooling water and compressed air Cooling water inlet: 3 - 6 bar Equipment CTS Control Panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Trolley with lead screw drive Test chamber / trolley made of stainless steel Insert basket made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Lodpfszf Ibksx Abzjag Scope of Supply 1x CTS TSS-70/130 Temperature Shock Testing Chamber Insert basket / test chamber equipment Existing documentation / files Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The device can be switched on Scope of supply as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Condition: excellent (used), RS-Simulators Temperature Shock System ST2K 1000 / 55 The system was regularly serviced and maintained by the manufacturer until it was decommissioned. Device Data Manufacturer: RS-Simulators Type: ST2K 1000 / 55 Design: Temperature Shock System Cooling: water-cooled Description Used temperature shock system for standard-compliant thermal shock testing. Suitable for material, component, and reliability testing. Application in industry, automotive, research, and quality assurance. System Description 2 separate temperature chambers (hot / cold) Automatic horizontal test basket transfer Fast changeover for temperature shock tests Temperature ranges Hot chamber: +40 °C to +180 °C Cold chamber: -70 °C to +100 °C Time deviation: ±0.8 K Test chamber Volume: approx. 580 liters Internal (W x H x D): approx. 1070 x 680 x 800 mm Max. load: approx. 150 kg Power supply 400 V / 3~ / N / PE / 50 Hz Power: max. 33 kVA Current consumption: max. 65 A Media connections Cooling water: G 1", approx. 3 bar (max. 10 bar) Cooling water requirement: max. 3.2 m³/h Cooling water return: unpressurized Compressed air: NW 7.2, 4–10.5 bar Dimensions: External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight: approx. 2800 kg Equipment: Horizontal basket movement C-rails in the test chamber Large test basket (>1000 mm) Observation window Internal lighting Controller SE-604 Program operation and data logging RS232 interface Refrigeration system Refrigerant: R449A / R23 R449A: approx. 8.0 kg R23: approx. 2.5 kg Operating data: Operating hours: approx. 4,500 hours Sound level: approx. 67 dB(A) Environmental conditions Temperature: +12 °C to +30 °C Humidity: 25 % to 75 % rel. humidity Scope of supply: RS-Simulators Temperature Shock System ST2K 1000 / 55 Scope of supply as shown in the pictures Functional test Refrigerant service Leakage test Condition: Used. Condition: see pictures. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. Ledpfx Ajy H Igfobzsag If you have any questions, please contact us.

Condition: excellent (used), CTS Climate Testing Chamber C-70/1000-S Lajdpfx Aey Iam Hebzog Device Data: Manufacturer: CTS GmbH Type: C-70/1000-S Design: Climate testing chamber / Environmental simulation chamber Cooling: Water-cooled Description: Used CTS climate testing chamber for precise temperature and climate testing. Suitable for material, component, and reliability testing. Used in industry, research, development, and quality assurance. Temperature and Climate Data: Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 2.5 K/min Temperature change rate (cooling): approx. 2.5 K/min Humidity range: 10 % to 98 % RH Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data: 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Refrigeration System: Refrigerant: R404A / R23 Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment: CTS control panel with LCD display Program operation Digital setpoint/actual value display Observation window in the door Stainless steel test chamber Test specimen protection / Temperature limiter Interior lighting Side cable entry points Entry points approx. 50 mm and approx. 125 mm RS232 interface according to documentation Digital outputs for test specimen control Mobile design on rollers Dimensions: Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Installation dimensions (W x D x H): approx. 2350 x 1290 x 2000 mm Weight: Test chamber: approx. 1000 kg Condenser: approx. 120 kg Documentation: Declaration of conformity Test certificates Operating manual Messages and digital channels Installation plan Quick start guide Humidity diagram Scope of supply: CTS Climate Testing Chamber C-70/1000-S Documentation, where available Scope of supply as shown in the images Functional test Refrigerant service Leak test Condition: Used. Condition, see images. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2017, Spiral mixer Sinmag KM-25 Condition: used, fully functional Year of manufacture: 2017 Suitable for a maximum of 12.5 kg of flour or 25 kg of dough Stainless steel bowl and spiral Timer control Two timers Ljdpsz A Rzxofx Abzoag Two speed settings Digital control Reverse operation Mobile with locking mechanism

Year of construction: 2012, condition: excellent (used), functionality: fully functional, machine/vehicle number: A0008858, Used Verderer VA25S-A01AS2SSSSPTPT Air-Operated Double Diaphragm (AODD) pumps with stainless steel configurations., serial number: A0008858; year of manufacture: 2012. Very good condition The specific arrangement code you provided (VA25S-A01AS2SSSSPTPT) designates a heavy-duty metallic pump constructed with a Stainless Steel fluid section, Stainless Steel seats, and PTFE (Teflon) balls and diaphragms, and defines a heavy-duty, highly corrosion-resistant configuration of the Verderair VA 25 Air-Operated Double Diaphragm (AODD) pump. This specific model is typically engineered to handle aggressive chemicals, strong acids, solvents, and high-temperature fluids The operating limits and physical profile for the Verderair VA 25 SS SS TF TF include the following parameters: Connection Size (Liquid):1" BSP or NPT (Threaded) Connection Size (Air): 1/2" NPT Maximum Flow Rate: 189 liters per minute (50 GPM) Maximum Discharge Pressure: 8.6 bar (125 PSI) Maximum Fluid Temperature: 104°C (220°F) Limited by the PTFE components Maximum Suction Lift (Dry): 3.0 to 4.9 meters Maximum Suction Lift (Wet): 6.0 to 8.8 meters Maximum Particle Size: 3.2 mm (Solids handling capacity) Pump Weight: approx. 16.5 to 18.8 kg (heavy due to full-metal construction) Certifications: ATEX certified (safe for explosive atmospheres) Dimensions: L 470 mm x W 250 mm x H 360 mm SS (Fluid Section): 316 Stainless Steel housing and manifolds. Provides high chemical resistance and mechanical durability; SS (Air Section / Check Valve Seats): Depending on the generation, this represents a heavy-duty Stainless Steel center air section or Stainless Steel valve seats. It avoids the corrosion or cracking risks associated with aluminum or plastic components in harsh environmental conditions; TF (Check Valve Balls): PTFE (Teflon) check balls. Ensures a tight seal and broad chemical compatibility during cycling; TF (Diaphragms): PTFE (Teflon) diaphragms (typically backed by an EPDM layer for flexibility). PTFE offers the highest level of universal resistance to corrosive fluids; Price 2.290 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare Lodpoz Abcpsfx Abzoag We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2017, operating hours: 15,000 h, BAUER BG 28 H Year of Man. 2017 Base carrier Bauer BT 75 More information upon request. Ljdpfjzqct Esx Abzsag

Condition: excellent (used), Vötsch VC 4034 Climate Chamber / Temperature Chamber Description: For sale is a used climate and temperature chamber from the manufacturer Vötsch Industrietechnik. This unit is suitable for demanding temperature and climate tests in research, development, quality assurance, the electronics industry, automotive technology, as well as material and aging tests. Ledpjzd Dm Hofx Abzjag The test chamber has been converted to the modern refrigerant R452A and features a user-friendly touch panel control. Thanks to the large test chamber volume of approximately 335 liters, the system is suitable for both individual test specimens and for extensive test setups. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4034 Test chamber volume: approx. 335 liters Test chamber dimensions: approx. 580 x 765 x 750 mm (W x D x H) External dimensions: approx. 780 x 1758 x 1800 mm (W x D x H) Weight: approx. 515 kg Temperature range: -40 °C to +180 °C Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±1.5 K Heating rate: approx. 3.2 K/min Cooling rate: approx. 3.5 K/min Climate operation: Temperature range: -40 °C to +180 °C Humidity range: 10 % to 98 % RH Temperature deviation over time: ±0.1 to ±0.3 K Temperature homogeneity spatially: ±0.5 to ±1.0 K Refrigerant: R452A Filling quantity: 2.5 kg GWP: 2141 CO₂ equivalent: 5.35 t ND max.: 22 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.1 kW Rated current: 12.5 A Equipment: Touch panel control Programmable test sequences Stainless steel interior Viewing window in the door Test chamber lighting Air circulation system Side feedthrough for measuring cables Several stainless steel insert shelves Air-cooled refrigeration system Documentation available Application areas: Temperature testing Climate testing Material testing Electronics testing Aging tests Environmental simulation Quality assurance Research and development Automotive testing Condition: Used Optical condition as shown in the pictures. Maintenance and calibration stickers are present. Refrigeration circuit converted to R452A. Scope of supply: 1x Vötsch VC 4034 Climate Chamber Stainless steel insert shelves Touch panel control unit Documentation / Documents Accessories as shown in the pictures Subject to changes and errors in the technical data. Subject to prior sale.

Condition: like new (used), Year of construction: 2020, operating hours: 5,500 h, functionality: fully functional, machine/vehicle number: XZHGB50-12050, Equipment: documentation/manual, Professional Offering: Complete and Unique Egg Tray Production Line in Hungary Laedpfx Aoya Eh Eebzjg We are offering for sale a complete and unique, turnkey production line located in Hungary. Capacity & Scope: The production line manufactures 10-egg cartons, suitable for both continuous and customized shift operations. We offer a complete, integrated system ranging from raw material preparation to final product delivery. Location & Infrastructure: The production line is located in Bátonyterenye, Hungary, within an industrial zone that provides the full infrastructure necessary for manufacturing operations. Market Potential: The entire output generated by this production line is currently distributed within the domestic market. System Components: The complete egg carton production line consists of the following modular units: Raw Material Preparation System: Processes waste paper into a moldable pulp suspension. HGHY Egg Carton Forming Unit: Finalizes the product shape through molding, followed by drying and hot-press thermal treatment. Palletizing System: Prepares the finished cartons for safe transportation and logistics. Auxiliary Infrastructure Systems: Comprehensive supply systems for compressed air, vacuum, power, gas, and water.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: iTNC640, table width: 800 mm, table length: 2,700 mm, rotary table diameter: 700 mm, spindle speed (max.): 15,000 rpm, coolant supply: 25 bar, spindle motor power: 46,000 W, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, DEMONSTRATION MACHINE This 5-axis machining center enables the complete machining of long components without the need for re-clamping. It is designed to ensure a high degree of dynamics and speed, despite its high stability and rigidity. The cross slide, traveling column, and bed are made of a steel/welded construction. The large tool magazine, connected to the column, ensures short tool change times. The machining center, "made in Italy," is equipped exclusively with European quality components. Laedpsz D Eruefx Abzsg Special equipment for the demonstration machine: Kessler milling spindle SK40, 60-position tool magazine, air through the spindle, flushing gun for cleaning the work area (including its own pump), Heidenhain TS460 wireless measuring probe (workpiece measurement), BLUM laser tool measurement, Heidenhain automatic kinematic control, rotating control panel, 25 bar internal coolant system, interface for KNOLL filter system, oil mist extraction Available for immediate delivery. While supplies last.

Condition: excellent (used), CTS Climate Test Chamber C-70/600 Type: C-70/600 Manufacturer: CTS Klima Temperatur Systeme Design: Air-cooled For sale is a CTS climate test chamber for temperature and climate testing in industry, research, development, and quality assurance. Condition / Display: Used unit, optical condition see pictures. Display in manual operation / stop. Temperature actual value: 16.59 °C Temperature setpoint: 5.00 °C Humidity actual value: 39.7 % RH Water supply: 11.0 l Special feature: Extended temperature range up to +210 °C (many standard versions only up to +180 °C) Technical data: Temperature range: -70 °C to +210 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Temperature change rate: approx. 2.5 K/min (heating/cooling) Test chamber volume: approx. 600 liters Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.0 kW Rated current: approx. 14.6 A Protection class: IP 22 Refrigeration system: Laedpfx Ajy I Tdxobzeg Refrigerant: R452A / R23 Cascade refrigeration system for low temperatures down to -70 °C Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Test chamber: Internal dimensions: approx. 850 x 850 x 830 mm Dimensions: approx. 1900 x 1115 x 1850 mm Weight: approx. 800 kg (depending on equipment) Equipment: Observation window Stainless steel test chamber Digital setpoint/actual value display Test specimen protection / temperature limiter VE water connection Condensate drain Pipe penetrations RS232 interface Digital outputs for test specimen control Scope of supply: CTS Climate Test Chamber C-70/600 Scope of supply as shown in the pictures Service / Preparation: Functional check and replacement of necessary components Refilling with legally compliant refrigerant (if necessary) Leak test with certificate Documented test run Other: Inspection possible by arrangement Loading can be organized Commercial sale (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: refurbished (used), MEP Syntax 25 Multifonction centre for bar stock | Revamped rebar processing machine This MEP Syntax 25 Multifunction centre is a refurbished bar stock processing machine designed for the efficient handling of reinforcing steel bars with working diameters from Ø8 mm to Ø25 mm. Fully serviced by MEP specialists, this machine offers an excellent solution for companies seeking reliable, high-quality rebar processing equipment with outstanding value. This MEP Syntax 25, originally manufactured in 2004 and professionally refurbished in 2026, has been cleaned, repainted, and fully serviced to ensure excellent operating condition and dependable performance. Technical specifications - Manufacturer: MEP - Model: Syntax 25 Multifunction Centre - Machine type: Multifunction centre for bar stock - Working diameter capacity: 1 × Ø25 mm; 2 × Ø16 mm - Bar diameter range: Ø8 - Ø25 mm - Refurbishment year: 2026 - Condition: Refurbished – Excellent (cleaned, repainted and serviced by MEP specialists) Accessories - Stocking area up to 14 metres - Manual feed system - Collection tray 12 × 2.5 metres Benefits ✓ Refurbished by experienced MEP specialists ✓ Excellent condition for immediate production ✓ Cost-effective alternative to purchasing new equipment Looking for a used MEP Syntax 25, a refurbished multifunction rebar processing machine, or other second-hand steel processing equipment? Explore our extensive inventory of quality semi-new machinery for the steel industry. Working diameter capacity:: 1xØ25mm, 2xØ16mm Ledpszl Ef Tefx Abzoag Bar diameter range: Ø8 - Ø25 mm Refurbishment year: 2026 Condition: Refurbished – Excellent (cleaned, repainted and serviced by MEP specialists) Accessories: Stocking area up to 14 m, manual feed, collection tray 12 x 2.5 m

Condition: refurbished (used), Year of construction: 2023, machine/vehicle number: R-00679, load capacity: 25 kg, arm reach: 1,831 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2256-C101#EGN, Refurbished FANUC M-20iD/25 manufactured in 2023.01. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-20iD/25 Model Number: A05B-1228-B202 Year of Manufacture Robot: 2023.01 Warranty term (months): 12   Payload (kg): 25 Reach (mm): 1831 Lsdpfx Abez Dz Dyozeag Repeatability (mm): ± 0.02 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Angle Mount Weight (kg): 250   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2023.01 RCC Length (m): 7   Teach Pendant: A05B-2256-C101#EGN Teach Pendant Cable Length (m): 10  

Condition: used, Year of construction: 2015, operating hours: 12,439 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, nominal power (apparent): 30 kVA, workpiece length (max.): 250 mm, workpiece width (max.): 250 mm, workpiece height (max.): 185 mm, operating hours of spindle: 12,439 h, number of slots in tool magazine: 20, input voltage: 415 V, type of input current: three-phase, Lumex Avance-25 by Matsuura, including automatic CAM software. For clarification: this is a machine that, during the melting process (all 10 layers in standard configuration with a layer thickness of 0.05 mm), also performs surface finishing through HSC milling. This means that the contour is milled to the exact dimensions every 0.5 mm, resulting in clean surfaces as typically seen in CNC milling. The Lumex Avance-25 is an excellent solution for those who want to participate in the world of hybrid additive manufacturing at the highest level. It combines laser sintering and milling in a single machining center. With its help, you can efficiently produce complex and precise parts while simultaneously benefiting from the flexibility and versatility of additive manufacturing. Details: Year of manufacture: 2015 Spindle hours: 12,439 Laser hours: 3,476 Build volume: 250x250x185 Gallery of manufactured components: alesco-gmbh.de/leistungen/additive-fertigung-3d-druck/ Ljdpfx Abezm Ub Hozoag With its robust design and proven performance, the Lumex Avance-25 is an investment that pays off. It offers a combination of reliability, precision, and efficiency, making it an excellent choice for any workshop or production line. Please do not hesitate to contact us for further information or to arrange a visit. We look forward to helping you discover the potential of the Lumex Avance-25 for your company. Further inventory and prices can be found at: inventar-verkauf.de/id/alesco Voltage: 415 V Voltage tolerance: ±10 % Frequency: 50 Hz Frequency tolerance: ±1 Hz Number of phases: 3 Capacity: 30 kVA Current: 41 A Short-circuit current: 30 kA If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2025, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). Holp Vario bucket VL.112.700 / MS10 / HARDOX / Wear plates / Year of manufacture: 2025 / NEW / in stock & immediately available Price: €6,290.00 net / €7,485.10 gross - Excavators from - to: 14 tons – 25 tons - Own weight approx.: 570 kg - Capacity SAE: 700 liters - Angle of repose: 54 ° - Radius of excavation base: 150 mm - Incl. wear plates - The bucket is made entirely of HARDOX. Advantages of the Holp Vario bucket: - Large surfaces - Robust design with high-quality materials - Minimum weight due to optimized triangular construction - Round base - Two working openings - Rectangular working opening - V-shaped - The Vario bucket impresses with high performance and clean operation. It enables precise dumping through the V-shaped opening and offers very high excavation performance in drag operation. Wherever more speed and flexibility are needed when handling a wide variety of tasks, the Vario bucket is a real asset on the construction site: it is faster, more adaptable and safer. We have many other Holp products in our warehouse that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telescopic handler sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. Ljdpfx Aozr Twwobzoag We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! Internal ID: 501171 = Further information = New: Yes Intended use: Construction Unladen weight: 570 kg Please contact Marius Herden for further information.

Condition: used, mileage: 380,000 km, power: 235 kW (319.51 HP), first registration: 11/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space length: 9,650 mm, loading space width: 2,520 mm, loading space height: 2,600 mm, Year of construction: 2016, Equipment: ABS, air conditioning, tail-lift, Manufacturer Volvo Model FE320 6x2-4 Chereau Carrier Supra 1250 Nordic Year 2016 Condition Very good Serial Number YV2V001CXGZ109589 Ref. nr. 368198 Reg. date: 25-11-2016 Last seen: 28-01-2026 Hk: 320 Km: 380000 Gearbox: Automatic Eurotype: 6 Lasdpfx Aoz D Rhbjbzog Diesel tank: 1 Tank liter: 255 l. Rear view camera: ? Air conditioning: ? Number of beds: 1 Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/55 - 315/70 - 385/55 Cover% left 30 - 40 - 40 % Front suspension: Air Suspension rear: Air Wheelbase: 6100 mm Total weight: 26000 kg. Net weight: 12100 kg. Load capacity 13900 kg. Inside length: 9650 mm. Internal width: 2520 mm. Interior height: 2600 mm Lift Brand: Zepro Lift capacity: 2500 kg. Remote control: ? Refrigerator brand: Carrier Supra 1250 Nordic Refrigerator year: 2016 Engine hours 3912

Condition: excellent (used), CTS Climate Testing Chamber C-70/600 Device Data Manufacturer: CTS GmbH Type: C-70/600 Model: Climate Testing Chamber Cooling: Air-cooled Description Used climate testing chamber from CTS. Suitable for temperature and climate testing. Application in research, development, and quality assurance. Operating Status Display: Manual operation / Stop. Temperature: 16.59 °C (Actual) / 5.00 °C (Set). Humidity: 39.7 % RH. Water supply: 11.0 l. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection class: IP 22 Refrigeration System Refrigerant: R404A / R23 Cascade refrigeration system Low-temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber Digital setpoint/actual value display Test item protection / Temperature limiter Water connection (demineralized water) Condensate drain Pipe penetrations RS232 interface Digital outputs Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1115 x 1850 mm Weight approx. 600 kg Scope of Delivery CTS Climate Testing Chamber C-70/600 Documentation (if available) Lajdjy H H D Aspfx Abzsg Functional Test Refrigerant service Leak test Test run with protocol Condition Used. Condition as shown in the pictures. Inspection possible by appointment. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, please do not hesitate to contact us.