Used Zopf Ahb80 for sale (75)

Condition: new, Year of construction: 2024, Bending machine ZB 70/2 H- with foot pedal- with standard roller setTECHNICAL SPECIFICATIONS:- two driven shafts, knurled surface - hydraulic adjusting of the center roller- working position horizontal and vertical - digital readout with memory- shafts are supported by conical bearings- slide bars on the slide-support are exchangeable- shaft diameter: 40 mm- roller diameter: 152/162 mm- shaft rpm: 8,5 U/min- voltage: 400V 50Hz 3Ph- drivingmotor: 1,1 kW- motor for hydraulic: 1,1 kW- hydraulic pressure: 8 to.- adjusting way: 120 mm- weight: 470 kg- dimensions: 900x600x1100 mm Hnedpfx Agodktnkjmjn

Condition: new, Year of construction: 2025, Bending machine ZOPF new - model ZB 80/3 H Hedpodkxiyofx Agmjnn - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 50 mm - roller diameter: 192 mm - shaft rpm: 7,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 0,75 kW - hydraulic pressure: 10 to - adjusting way: 120 mm - weight: 680 kg - dimensions: 900x800x1300 mm

Condition: as good as new (ex-display), Year of construction: 2025, Hydraulic horizontal bending and straightening press - Fabrikat Zopf - Model T 500 with straightening equipment - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 50 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm Hnsdpjdk H A Iofx Agmsn - motorcapacity 5,5 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 1300 kg - bending capacity: flat material max. 300x15 mm round tube 3/8" - 2 1/2"

Condition: as good as new (ex-display), Year of construction: 2024, Horizontal Bending press Zopf - model T 200 - year of construction 2024 - demo model - length of stroke 185 mm - weight 450 kg Bending capacity flat material mild steel 200x12 mm (with special tooling) with punch radius 5 mm and die V = 63 mm inclusive mecanical stop Digital Readout with programming of the stroke Hnjdpfjdy Igzjx Agmjn demo model

Condition: new, Year of construction: 2024, Bending machine ZB 80/3 H eco - with foot pedal - with standard roller set - three driven shafts smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg Hnedpfsgh T Hrex Agmjn - dimensions: 900x600x1100 mm

Condition: new, Year of construction: 2024, Bending machine ZB 70/3 H NC Zopf - semiautomatic - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to - adjusting way: 120 mm - weight: 490 kg - dimensions: - colour RAL5012 / RAL7015 NC-CONTROL for ZB 70/3 HA: - two axes controlled Hodpfx Agsfkz Rbemsnn - touch screen - memorise of 1000 programs ech 19 steps - interpolation - accuracy of the y-axes 1/10 mm - programmable forward and backward

Condition: new, Year of construction: 2025, 2-roll driven profile bending machine Hydraulically adjustable top roller Shaft diameter: 40 mm Hodjhgiuhspfx Agmsnn Roller diameter: 152-162 mm Revolutions: 8.5 per min. Top roll adjustment: 120 mm Capacity table: in the attachment Machine available in various versions: Manual adjustment, 3-roll driven etc.

Condition: as good as new (ex-display), Year of construction: 2025, Horizontal Bending press Zopf - model T 100 - year of construction 2025 - demo model - length of stroke 200 mm - weight 320 kg Bending capacity flat material mild steel 150x10 (with special tooling) with punch radius 5 mm and die V = 63 mm inclusive mecanical stop Hnodjdibygopfx Agmen Digital Readout with programming of the stroke demo model

Condition: new, Year of construction: 2025, Pipe Bending Machine Zopf Model KB 100: Capacity: - Maximum pipe diameter: 100x5 mm (St. 37) - Square profiles: 80x80x3 mm Hodpfx Aex I Afxegmenn - Solid material: 45 mm - Maximum tool diameter: 900 mm - Bending angle up to 210 degrees - Bending speed: 0 - 2.2 RPM - Motor: 11 kW, 400 Volt, 50 Hz, 3-phase - Weight: 1850 kg - Dimensions: 140x80x160 cm Features: - Digital display - Programmable bending angle - With foot pedal - Equipped with inverter - Powerful motor and reduction gearbox for high torque - Control unit for setting the bending angle - Counter for positioning the counter bearing - Mobile control panel - Quick tool change - All shafts hardened and ground - Manual material clamping - Worktable made of CK 45 steel

Condition: new, Year of construction: 2023, Horizontal bending machine AH 20 with backgauge - ZOPF - with semi-automatic control - hydraulic pressure 20 to. - length of stroke - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 2,2 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg Hjdpfxowyt Tqs Agmonn - bending capacity: flat material max. 150x12 mm round tube up to 48 mm

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: BB 60, Tube Bender BB 60 without mandrel with one set of tooling 60 mm radius ca. 175 mm with counter rollers - model BB 60 - capacity up to 60 x 3,6 mm (mild steel) round tube mild steel Hnedpfx Aod Eywyegmen - digital readout - bending angle programable - with foot pedal - bending speed 1 - 3 rpm - stepless speed - motor 3 KW 400 volt 50 hz 3 ph. - all shafts and necessary parts are heat treated and grinded - monoblock body CK 45 - weight 400 kg - 400 volt 50 Hz 3 ph.

Condition: new, Year of construction: 2023, tube bender R2 ZOPF - without bending tooling - with foot pedal and emergency stop - without tooling - control unit - 100 programs of 9 bends each - precise electronic control of C-shaft - manual and automatic bending mode - bending angle and springback angle are programmable by means of a microprocessor - rapid engagement and disengagement of the tooling Hodpsdkxkxjfx Agmonn - scale for counterbending holder - movable - dimensions 930x410x1000 mm - weight 280 kg - motor 1,5 Kw - 400 V 50 Hz 3 ph. - bending radius R55 - R340 mm - bending capacity of tube Ø 5 mm to 60 mm - max. Bending angle of 210 °

Condition: as good as new (ex-display), Year of construction: 2024, shaft diameter: 60 mm, bending machine model AHB 60 ZOPF - three roller driven - two hydraulic adjustments - 2 digital readout with memory - standard roller set Hsdpfsdkxvmox Agmsnn - horizontal and vertikal use - 60 mm shaft HS-Code: 8462 2998

Condition: new, Year of construction: 2025, tubebender-mandrelbender Zopf 32 H with small digital for programming mandrel length 3000 mm bending capacity round tube up to 32 x 2,0 mm mild steel maximum bending radius 275 mm minimum bending radius 36 mm maximum bending angle 180 degrees Hedpfxjfh Nz Ts Agmsnn motor 2,2 KW main motor hydraulic motor 1,5 KW hydraulic clamping of tube weight 400 kg 400 volt 50 Hz 3 ph.

Condition: new, Year of construction: 2009, 30 mm 30 mm L-beam 20 x 20 x 4 mm flat steel 25 x 6 mm Axis diameter 20 mm work speed 11 U/min total power requirement 0,2 kW Hodpfx Aev Skzdegmenn weight of the machine ca. 80 Kg dimensions of the machine ca. 0,6 x 0,6 x 1,5 m Profile bending machine with: - Foot pedal for right/left rotation - Digital display - 1 set of standard rollers - 3 rollers are driven - Horizontal or vertical operation

Condition: new, Year of construction: 2024, Bending machine ZB 80/3 H eco NC - with foot pedal - with standard roller set - three driven shafts smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - NC control with touch screen - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph Hjdpfxjg Ntmhj Agmonn - drivingmotor: 1,5 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg - dimensions: 900x600x1100 mm

Condition: new, Year of construction: 2024, Ring Rolling Machine Zopf - Model ZB 60/3 MD Hnsdogh T Hkspfx Agmen - year of construction 2024 - motorized - with digital readout - three working rolls - shaft diameter 30 mm - including standard rolls - bending capacity round tube up to 48 x 3,2 mm - solid material up to 30 mm - weight around 150 kg - motor 0,75 kw 400 Volt 50 Hz 3 phase - including basement horizontal and vertical

Condition: as good as new (ex-display), Year of construction: 2025, Horizontal bending machine T 400 Multi - ZOPF - with semi-automatic control - (99 bending programs each 16 steps) - hydraulic pressure 40 to. - length of stroke 250 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 3,0 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - colour RAL5012 / RAL7015 - bending capacity: flat material max. 200x22 mm round tube up to 65 mm Hedpfsfiqlfsx Agmsnn

Condition: new, Year of construction: 2025, Bending machine ZOPF ZB 140/3 H 2 - compl. with standard roller set, - digital readout for left and right axis - hydraulic side guides - three smooth driven rollers - planetary movement of bending rolls - working with both vertical and horizontal shafts - built according to the CE rules - bending capacity steel up to 110x25 mm -shaft diameter 110 mm -Rolls diameter 350 mm -working speed 5 m/min -installed power 7,5 kw -weight 2950 kg Hnsdpfxsd A Nb He Agmjn -module max Wcm3 157 -400 Volt 50 Hz. 3 ph.

Condition: new, Year of construction: 2026, Tube Notcher/Grinder AL 100 U ⦁ Grinds at any desired angle ⦁ Grinds any required diameter ⦁ Suitable for all standard materials ⦁ Designed for pipes and profiles Hedjx Irvmepfx Agmonn - Operation via eccentric lever - Grinding belt 100 x 2000 mm - Motor 3.0 kW, 400 Volt, 50 Hz - Speed 2905 rpm - Belt speed 30 m/sec. - For tubes from 20 mm to 76 mm - Weight 200 kg

Condition: new, Year of construction: 2026, Rebar Bender IB 36 - solid construction - turning table - manual and automatic mode - Pre selection of bending angle 3 piece Hsdpfodibzvsx Agmjnn - 2 sideholders - with foot pedal for left and right bending Technical Details: bending capacity 500 N/mm² 28 mm Dimensions 800x900x800 mm weight 350 kg motor 3,0 KW bei 400 V 50 Hz 3 phase

Condition: new, Year of construction: 2026, Ring Rolling Machine MB 50 - with standard roller set - footpedal - two drivn rollers - horizontal and vertical use - bending capacity round tube up to 60 x3,6 mm - angle iron 50x50x6 mm - solid steel 35 mm - main motor 1,5 kw - shaft diameter 50 mm Hnsdpfx Agsdkxlkomen - weight 325 kg - 400 volt 3 phase

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Rebar Bender P74 Evo Year of manufacture: 2023 (like new, only used for testing) Programmable with digital display Hnjdpfx Agey Awzkjmsn With modular workbench with rollers, 2 meters With Uniq stirrup tool for 2 materials, 16 mm Serial no. 400V-50Hz, 3-phase basic A/C Motor: 7.5 kW CE declaration With preset bending angle via plug-in pins 5 rpm Disc diameter: 720 mm Maximum bush diameter: 400 mm Foot switch Dimensions: 160x116x96 cm Weight: 1600 kg Bending capacity at R = 65 kg/mm2, Round: 60 mm At R = 86 kg/mm2 – round steel: 50 mm With bushes, see photos With 1 piece square pin HS-Code: 8462 5900

Condition: like new (used), Year of construction: 2025, Tube Bender BB 76 without mandrel with one set of tooling 76 mm radius 275 mm with counter rollers - model BB 76 - capacity up to 76 x 4 mm round tube mild steel - digital readout - bending angle programable - with foot pedal - bending speed 1 - 3 rpm - stepless speed - motor 4 KW 400 volt 50 hz 3 ph. - all shafts and necessary parts are heat treated and grinded Hnedodihnujpfx Agmjn - monoblock body CK 45 - weight 600 kg - dimensions 600x1100x1000 mm

Condition: new, Year of construction: 2024, machine/vehicle number: 302340, Profile Bending machine KB Türkei model MB 30 bottom shaft 30 mm top shaft 35 mm two rollers driven with basement Hnodpfx Agod S Uf Semon capacity: up to round tube 48 x 3,0 mm flat material 50x10 mm square tube 40x40x3,0 mm weight 170 kg motor 0,75 kw 400 Volt 50 Hz 3 ph.