Used Weathering Test Device For Light Aging for sale (37,210)

Condition: good (used), Year of construction: 1998, Vötsch VT 7030 S2 Temperature Shock Test Chamber System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. Based on these cyclical loads and accelerated aging caused by temperature changes, weaknesses in the test specimen can be identified. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving carriage All-round grids in the moving carriage secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The warm chamber can be used as a temperature storage device, and the cold chamber can be used as a temperature cycling device Touch panel for convenient operation of the simulation programs with graphical display Minimal energy consumption No compressed air required Data for temperature tests in single-chamber operation Warm chamber: Temperature shock test chamber, test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 11 K/min Cold chamber: Temperature shock test chamber, test chamber 300 l Temperature range -80 °C to +70 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 1.5 K/min Cooling 4 K/min Technical data: Temperature shock test chamber Test chamber volume approx. 300 l Voltage: 3/N/PE AC 400 V ± 10%, 50 Hz Rated power: 30 kW Rated current: 50 A Refrigerant: R-404a / R-23 Refrigerating unit: Water-cooled Weight: approx. 940 kg Year of construction: 1998 Test chamber dimensions: Width 770 mm x Depth 650 mm x Height 610 mm Housing dimensions: Width 1200 mm x Depth 1800 mm x Height 2050 mm Fsdpfx Ajwbdv Sekyepn TS 05 You can find more items - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), For sale is a Karl Süss HR 100 Analyse – a high-end, manual measurement and testing station designed for the analysis and contacting of semiconductor wafers and microelectronic components. The device is used in laboratories, research and development departments, and during scientific research. The station is equipped with a precise measurement table with fine adjustment, a sample holder with a vacuum function, and a mechanical lifting mechanism. It also has connections for compressed air and vacuum, which ensures stable mounting of the components being tested during measurements. Technical data: Manufacturer: Karl Süss Model: HR 100 Analyse Fodpfozl H Ayex Akyopn Device type: manual testing station (Wafer Probe Station) Application: analysis and testing of semiconductor wafers and microelectronic components Vacuum function for sample mounting Precise measurement table Connections for compressed air and vacuum Condition: used, as shown in the pictures.

Condition: good (used), Feutron Temperature Testing Chamber -40 to +100°C Fedoy Nynaopfx Akyspn The Feutron TPK 3403/125, thanks to its robust design, is a reliable workhorse for standardized temperature tests. The main application areas for this model are: 1. Electronics and Component Testing This is the most common application. It involves testing how components react to extreme temperatures: Functional testing: Does the circuit board still function flawlessly at -40 °C or +150 °C? Burn-in tests: Artificial aging of components through continuous operation at high temperatures to provoke early failures. 2. Material Testing Investigation of physical changes in materials: Brittleness: Do plastics or rubber seals become brittle in the cold? Deformation: Do composite materials warp in the heat? Storage tests: How stable do chemical substances or adhesives remain over long periods at a constant temperature? 3. Quality Assurance (QA) Sample testing: Tests carried out during production to ensure that the production process meets the specified temperature ranges. Standard testing: Conducting tests according to common industry standards (e.g., DIN EN 60068), which prescribe specific temperature profiles. 4. Research & Development Prototyping: Testing new housing designs or materials under controlled thermal conditions before mass production. Manufacturer: Feutron Type: TPK 3403/125 Temperature range: -40 to +100°C Refrigeration unit: Air-cooled condenser Temperature stability: approx. ±0.1 to ±0.5 K Usable volume: approx. 125 liters Refrigerant: R22 Operating overpressure: 23 bar Power connection: 220/280V-3-50Hz Supply line fuse: 25 A Protection class: IP 20 Weight: 480 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs upon request!

Condition: used, Year of construction: 2023, machine/vehicle number: SE_00650, This RIDE60 type electric motor test stand, manufactured by FAZUA (custom-built), is for the RIDE60 electric drive series and was manufactured in 2023. It will be auctioned off in our online auction entitled "Closure of a well-known German manufacturer of e-bike drives: warehouse, production, and office equipment, test stations, bicycles, tools, accessories." Further details: Manufacturer: FAZUA (custom-built) Type: End-of-line test stand Year of manufacture: 2023 (according to the nameplate of one station) Condition: used, functionality not checked Quantity: 3 identical stations available (auctioned separately) Location: 85521 Ottobrunn near Munich Test stand for final inspection of e-bike drive units from series production. The drive unit is tested and calibrated under load; power and torque are measured, among other parameters. Complete with control computer and label printer. Technical data (information without guarantee) Test track with servo motor, 2 pneumatic brakes, and torque sensor Metal bellows couplings Mount for the drive unit with quick-release mechanism Safety enclosure made of aluminum profile with transparent flaps Base cabinet with 3 doors Fedpfsz Ng Ayex Akyspn Control panel with emergency stop, main switch, start button, indicator lights, and 2 manometers Panel PC 15.6" Label printer Zebra ZT231 Hand scanner (not on all stations) Operating voltage 230 V / 16 A / 50 Hz (according to the nameplate of one station) Compressed air connection required (6.5 bar) Dimensions approx. 1,800 x 600 x 1,400 mm Sale Sale via online auction on RESTLOS.com. Bidding ends on 19.10.2026. Viewing: [16.10.2026; 9:30 a.m. to 12:00 p.m. – booking via our RESTLOS auction platform] All information without guarantee. Functionality not checked. Test software is not included in the offer unless expressly stated.

Condition: good (used), The ALFRA PSG 5+ profile rail cutting device was manufactured in 2015 and is equipped with a hydraulic attachment. The length stop enables precise, repeatable cutting of profiles. An ALFRA 120 electro-hydraulic pump is connected to the hydraulic attachment and is included in the offer. The workbench is also part of the package. The device has been function-tested and has an electrical inspection performed by an electrical company. Fpedpfoz N Smdox Akyjn

Condition: good (used), Pressure testing device, measuring device -with trailing-pointer Fedpfx Aksb A Rlyeyopn -Max. pressure: 20 bar -High-pressure hose -Dimensions: 400/160/H200 mm -Weight: 4 kg

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Canon High Capacity Stacker H1/J1” finishing machine Item for sale: 1 x Canon High Capacity Stacker H1/J1 Condition: This offer is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). Compatible with various Canon imagePRESS models, including the C650/C750/C850, C710/C810/C910 and C8000VP/C10000VP. Fedpoz Ixzqofx Akyjpn The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: like new (used), GBS Test Pulse rev3 Pulse Generator for Long-Term Insulation Tests The Test Pulse system is designed for long-term insulation tests on test specimens with a capacitance of up to 6 nF. Converter for High-Voltage Test Transformer * Internal sine wave generator: 50-200 Hz. * Pulse width modulation 16-24 kHz of the sine wave via a full-bridge. * Converter voltage adjustable from 0-600V, Imax=2.6A, maximum power 1.3kW * Pulse current limitation 110A (shutdown threshold) Pulse Transformer – Drive * Drive via a full-bridge * Full-bridge power supply adjustable from 0-1000V, 1.3A max. * Pulse current limitation 100A (shutdown threshold). * Pulse width 20-120μs, nominal 94μs, adjustable * 2 selectable series inductances 150μH, 300μH, to adjust the pulse width and rise times to the load capacitance and voltage. * Pulse repetition frequency 0.1 – 2.5 kHz, adjustable. * Polarity: Adjustable to positive, negative, or alternating, depending on the polarity of the sine wave. * Cosine-shaped pulse at the transformer output Pulse Transformer Cascade * Output transformers in a 5-stage cascaded circuit. * Total turns ratio selectable as 1:7.7, 1:10, or 1:15 via taps. * Maximum output voltage 15kV with possible load capacitances of: * 6nF with a pulse width of 73μs at a repetition frequency of 2.5kHz * 10nF with a pulse width of 103μs at a repetition frequency of 1.25kHz * Voltage divider 1:1000 in parallel. * Overvoltage protection at approximately 20-23 kV via parallel spark gaps * Thermistor for overtemperature detection in the 1st transformer stage. * Earth-side current measurement socket 100 mV/A. Fodpfxsu Egz Ro Akyopn Breakdown Detection, Testing * If the maximum bridge currents for the transformer drives or the maximum currents of the bridge power supplies are exceeded, the high voltage is switched off. * The device has a resettable operating hour counter to determine the test time. Manufacturer's price approx. €59,500.00 You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Testing device for extension cables -Socket tester -Testing device for: extension cables, table sockets Fpodpfx Ajb A Iufekysn -Weight: 30 kg

Condition: good (used), Material testing station / final inspection comprising the following main components: Keyence XG-H500M Digital 5-million-pixel B/W camera Keyence XG-7701P Multi-camera image processing system / controller Keyence CA-DC21E Lighting controller Opto Engineering TC23096 Bi-telecentric lens Keyence XG-H500M Digital 5-million-pixel B/W camera CCD: 2/3-inch monochrome CCD, square elements, all pixels with 11x faster readout speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), line skip (40.3 ms) Interlace is a binning process that sums the odd and even lines. Model CA-DC21E Lighting controller Type: Lighting controller, for XG/CV-5000/CV-X200/CV-X100 series only Input: Forced lighting shutdown: Input voltage max. 26.4 V, min. 2 mA Output: Light control method (1) Constant voltage control method (DC lighting) (2) Pulse width modulation method (emission frequency: 100 kHz) [Change controller setting] Brightness levels 255 levels digital [Change controller setting] Number of connections: 2 channels (available for LED connection and terminal block connection) Voltage: 12 VDC / 24 VDC [Setting via DIP switch] Power: Max. 40 W (30 W per channel) Synchronization: Synchronization via FLASH output / continuous lighting [Change controller setting] Response time: (1) Constant voltage control: Max. 10 ms at 12V output, Max. 20 ms at 24V output (2) Pulse width modulation method: Max. 1 ms at 12V/24V output Display: LED display Supply voltage: 24 VDC ±10 % Power consumption: 3.0 A (12 V output at maximum load), 6.5 A (24 V output at maximum load)*1 Keyence XG-7701P Multi-camera image processing system / controller TC23096 Bi-telecentric lens for 2/3" detectors, magnification 0.093x, C-mount Magnification (×): 0.093 Image circle Ø (mm): 11.0 Max. detector size: 2/3" Working distance (1) (mm): 278.6 wF/# (2): 8 Typical telecentricity (max) (3) (deg): < 0.06 (0.08) Typical distortion (max) (4) (%): < 0.04 (0.08) Depth of field (5) (mm): 77 Fodpog Sxmfjfx Akyopn CTF @ 70 lp/mm (%): > 40 Image area of the object (6): with 1/3" detector (4.8 x 3.6 mm) (mm × mm): 51.61 x 38.71 with 1/2.5" detector (5.70 x 4.28 mm) (mm × mm): 61.29 x 46.02 with 1/2" detector (6.4 x 4.8 mm) (mm × mm): 68.82 x 51.61 with 1/1.8" detector (7.13 x 5.33 mm) (mm × mm): 76.67 x 57.31 with 2/3" - 5 MP detector (8.50 x 7.09 mm) (mm × mm): 91.40 x 76.24 Dimensions Mount: C Phase setting (7): Length (8) (mm): 336.6 Diameter (mm): 143 Weight (g): 2500 Complete factory closure, large selection of storage platforms, pallet racks, shelving racks, paternoster. High-quality industrial machines, lathes, grinding machines, hand tools. Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: new, total width: 600 mm, total height: 2,000 mm, total length: 2,000 mm, shelf length: 1,850 mm, Mega-M FORTIS LIGHT storage rack – new. The Mega-M FORTIS rack is made of high-quality powder-coated steel. It has a solid and durable construction. It consists of a strong frame and steel crossbars as well as shelves with additional reinforcements. All this contributes to its durability and high load capacity. The shelving unit can be quickly and easily assembled and rebuilt to suit your needs. Therefore, it will never lose its versatility. The metal shelving unit can be used to store bulky items weighing up to 200 kg on a single shelf. It allows for the storage of storage containers, workshop accessories, production materials, tools, preserves and seasonal products. The modular shelving unit is ideal for both industrial and domestic use. Its wide range of applications allows the shelving to be used in: warehouses, shops, wholesalers, workshops, offices, archives, garages, basements and pantries. Fortis Light shelving facilitates access to products on the shelves. The offer applies to the following shelving: Item number: MPP000890 Number of shelves: 4 Shelf load capacity (kg): 200 Shelf height adjustment (cm): Every 7.5 Rack type: Base module Rack height (cm): 200 Rack length (cm): 200 Rack depth (cm): 60 Shelf dimensions: Shelf depth (cm): 60 Shelf width (cm): 185 Net price: €135.00 net per set. Item number: MPP000891 Number of shelves: 4 Shelf load capacity (kg): 200 Shelf height adjustment (cm): Every 7.5 Shelf type: Base module Shelf height (cm): 200 Shelf length (cm): 200 Shelf depth (cm): 60 Shelf dimensions: Shelf depth (cm): 60 Shelf width (cm): 185 Net price: €118.00 net per set. Item number: MPP000901 Number of shelves: 5 Shelf load capacity (kg): 200 Shelf height adjustment (cm): Every 7.5 Shelf type: Base module Shelf height (cm): 200 Shelf length (cm): 200 Shelf depth (cm): 60 Shelf dimensions: Shelf depth (cm): 60 Shelf width (cm): 185 Net price: €158.00 net per set. Item number: MPP000902 Number of shelves: 5 Shelf load capacity (kg): 200 Shelf height adjustment (cm): Every 7.5 Shelf type: Base module Shelf height (cm): 200 Shelf length (cm): 200 Shelf depth (cm): 60 Shelf dimensions: Shelf depth (cm): 60 Shelf width (cm): 185 Net price: £140.00 net per set. Fpsdpfx Akeyfgdreyjn Item number: MPP000903 Shelf load capacity (kg): 200 Shelf dimensions: Shelf depth (cm): 60 Shelf width (cm): 185 Net price: €29.00 net per set. Item number: MTP003781 Rack height (cm): 200 Rack depth (cm): 60 Net price: £25.00 net per set. * For larger quantities, the price is negotiable. * Transport possible throughout Europe. * Location: 39-442 Chmielów, Poland.

Condition: good (used), functionality: fully functional, In this offer you are purchasing a ‘Canon RCT 2 / II’ finishing option as good as new Object of sale: Fpodpfx Aksu Rbb Noyen 1 x Canon RCT II suitable for various Canon models Counter readings: Total: Approx. 555 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Year of construction: 1988, condition: used, For sale is an environmental simulation system / climate testing system from WEISS Umwelttechnik GmbH, type 64/80-130DU. Technical data: Manufacturer: WEISS Umwelttechnik GmbH Type: 64/80-130DU Device No.: 221/11506 Year of manufacture: 1988 System No.: 99663 Wiring diagram No.: 99662 Refrigerant: R404A – 0.8 kg Refrigerant: R23 – 0.8 kg Low-pressure max.: 18 bar Fpjdpfxez Izwno Akyjn High-pressure max.: 25 bar Operating pressure: 16 bar Electrical connection: 3/N/PE AC 400 V ±10 %, 50 Hz Rated power: 1.3 kVA Rated current: 60 A Service No.: 44985 Description: Robust environmental simulation or climate testing system from WEISS Umwelttechnik for performing tests under defined climatic conditions. The system comes from an industrial setting and is particularly suitable for use in development, quality assurance, and testing technology.

Year of construction: 1980, condition: used, TAŚMÓWKI FOR FOAM BULLMER WERK 7759 Fedpjcr Ru Defx Akyepn Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Description Comments MACHINE FOR CUTTING UPHOLSTERY FOAM ENGINE 1 kW, 220/380 VOLT, HAS A NOSE-STONES TO SAW TAPE LENGTH WITHOUT END 4050 mm, cutting width 1100 mm, table length 2250 mm, table width 1170 mm

Year of construction: 1998, condition: used, Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS Fpsdpob Umtkofx Akyjn

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, arm reach: 3,900 mm, conveyor belt length: 8,000 mm, conveyor belt width: 600 mm, product height (max.): 2,600 mm, No reserve price – guaranteed sale to the highest bidder! The machine's original price in 2021 was EUR 1,480,000 (net)! TECHNICAL DETAILS Performance and Capacity Processing capacity: 60 pallets per day Boxes per pallet: up to 54 units Maximum box weight with 54 boxes: 15 kg Overall height from top of pallet: 2,500 mm Maximum total height (including pallet): 2,600 mm Maximum total load: up to 500 kg Process Times Stacking time per box: 12–15 s Wrapping time: approx. 30 s AGV cycle time (incl. pallet change, wrapping, labeling, transport): about 4 min Transport and Material Flow AGV travel distance: approx. 70 m Number of pallet change positions: 6 Available positions during pallet change: 5 Robot Industrial robot: 6-axis articulated arm robot Payload: 120 kg Reach: 3,900 mm Availability: 99.9 % Protection class (robot): IP64 Robot control: KUKA, protection class IP54 Robot pedestal: height 1,500 mm Safety and Control Technology PLC: Siemens S7-1500 with MP 277 Touch Panel, 19" industrial PC panel Central safety control: with decentralized I/O modulation Profinet slave card: for PLC communication Safety light curtains: 1× A 1,500 mm with muting (3 for robot cell, 1 for door, 1 for wooden pallet stacking) Conveyor Technology and Pallet Handling Powered pallet conveyor: length 4 m, width 1,200 mm Pallet transfer station: GoPal E24/W for docking station Pallet station power unit: GoPal 400 / E24/W Pallet detection kit: included AGV System Transport unit: autonomous AGV GoBot GoPal E24/W Server: GoControl Operating unit: GoPal operating unit (1× call button) Interfaces: GoPal AUX Interface Box (I/O) Integration: fully integrated into AGV system Conveying Technology and Singulation Box conveying line: 17 m long, 600 mm wide Horizontal robot transfer section: 1 m Belt conveyor for boxes (new line): 8 m long, 600 mm wide Singulation system: pneumatic pusher Singulation stopper: included Pallet Stacking Systems Automatic pallet stacking system for Euro pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar Automatic pallet stacking system for wooden pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar MACHINE DETAILS System footprint: 5.6 m² (base area) Connected load: 38 kW Weight: 3,500 kg Fedpfxoxu Upmo Akyopn Note: Further information on the equipment configuration can be found in the attached specification sheet.

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Fpjdpfx Aksq Nf U Esyon Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used accessory, the ‘Ricoh RB5020 ring binder’. Item for sale: 1 x Ricoh RB5020 suitable for the following models: Ricoh Pro C7200 series Ricoh Pro 8200 series Ricoh Pro C9200 series Please check in advance whether this accessory is suitable for your machine. Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality Fjdpfx Akexzqhfeyepn A test binding can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Offered for sale is a Komet ISG3100 shrink fitting machine for the precise and rapid shrinking of tools in shrink chucks. The device is ideally suited for use in CNC machining, toolmaking, mold making, and modern cutting processes. Thanks to the induction technology, tools can be quickly and reliably shrunk in and out. The compact design and ease of operation make the device an efficient solution for daily tool preparation. Features: Manufacturer: Komet Type: ISG3100 Induction shrink fitting technology Fjdozu Ikkspfx Akyspn Fast heating of shrink chucks Simple and safe operation Suitable for various tool holders Compact and robust industrial design Ideal for CNC machining and tool management Advantages: High concentricity accuracy of the tool holders Fast tool changes Reliable tool clamping Reduction of setup times Long service life of the tool holders Suitable for series production and single-part production with various holders from HSK30 to HSK100 Used, fully functional. Shows signs of wear consistent with its age.

Condition: good (used), Instron Wolpert V-Testor 4562 Micro- and Low-Load Hardness Tester High-quality and extremely robust low-load hardness tester from the renowned manufacturer Instron Wolpert, model V-Testor 4562 (V-Testor 2 series). These mechanical-optical precision instruments are known for their exceptional durability and reliability in materials testing, metallography, and quality assurance. The device is ideal for Vickers (HV) hardness testing in the low-load range. Fpsdpfjzniayjx Akyon Application area: It is typically used to determine the hardness of thin films, surface structures, small precision parts, or metallographic samples in laboratories and for quality assurance purposes. Technical data & details: Manufacturer: Instron Wolpert GmbH Model: V-Testor 4562 Testing method: Vickers (low-load range) Optics: Integrated precision measuring microscope for evaluating the indentations Application area: Hardness determination of metals, thin films, and surface structures You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Vötsch Temperature testing chamber / Vibration testing chamber Vötsch VTV³ 7120-10 temperature testing chamber Temperature range: -70 °C to +180 °C For combination with vibration / oscillation testing systems For sale is a used temperature testing chamber from the manufacturer Vötsch Industrietechnik / Weiss Technik. Suitable for temperature tests as well as tests in combination with vibration and oscillation testing systems, environmental simulation, material and component testing, and development, aging, and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik / Weiss Technik Type: VTV³ 7120-10 Design: Customer-specific Simpac unit Equipment type: Temperature testing chamber / Vibration testing chamber Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1,150 liters Temperature change rate (cooling): approx. 10.5 K/min Temperature change rate (heating): approx. 12.0 K/min Test chamber dimensions (W x D x H): approx. 1,100 x 1,100 x 950 mm External dimensions (W x D x H): approx. 1,525 x 3,590 x 2,150 mm Weight: approx. 2,150 kg Refrigerant 1: R452A Quantity: 8.00 kg · GWP: 3,922 · CO₂ equivalent: 31.38 t Max. low pressure: 22.5 bar g · Max. high pressure: 25 bar g Refrigerant 2: R23 Quantity: 5.60 kg · GWP: 14,800 · CO₂ equivalent: 82.88 t Max. low pressure: 22.5 bar g · Max. high pressure: 25 bar g · Static pressure: 17 bar g Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 26 kW · Rated current: 49 A Equipment: Programmable touch panel control Temperature control Fodjz Ixwlepfx Akyepn Large stainless steel test chamber Observation window Test item feedthroughs Preparation for vibration / oscillation testing systems Water-cooled refrigeration unit Multi-stage refrigeration system Connection and supply components as shown in the pictures Areas of application: Temperature and vibration testing Environmental simulation Material, electronics, and component testing Assembly and automotive testing Quality assurance Research and development Lifetime, aging, and stress tests Environmental Stress Screening (ESS) Condition: Used Optical condition as shown in the pictures Scope of delivery: 1 × Vötsch VTV³ 7120-10 temperature testing chamber Programmable touch panel Existing connection and supply components Accessories as shown in the pictures Shipping or freight forwarding possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by phone.

Condition: used, Zwick / Roell Universal testing machine / Material testing machine Zwick / Roell Z005 5 kN Allround table-top Complete material testing system with testXpert II and extensive accessories For sale is a used universal testing machine from the manufacturer Zwick / Roell. The testing system is suitable for tensile, compression, and material tests as well as for component, plastic, metal, and parts testing. Technical data: Manufacturer: Zwick / Roell Type: Z005 / 5 kN Allround table-top Testing system type: S0101 Max. testing force: 5 kN Crosshead speed: 0.0005 – 3,000 mm/min Return speed: max. 3,000 mm/min Testing space width: 640 mm Testing space height without attachments: approx. 1,400 mm Dimensions of testing system with support profiles and machine electronics (W × D × H): approx. 1,244 × 690 × 1,878 mm Weight with typical attachments: approx. 291 kg Mains connection: 230 V / 50–60 Hz Connection: 1L / PE / N Equipment: Zwick / Roell Z005 5 kN testing machine Zwick / Roell machine electronics Handheld control unit with emergency stop Zwick / Roell testXpert II testing software PC system with monitor, keyboard and mouse Load cell and measuring components SAIM cross- / positioning table Specimen holder and clamping tools Clamping plate Connection and measuring cables Original operating instructions Software / documentation Further extensive accessories as shown in the pictures Fedpfjz Iy Tzsx Akyspn Application areas: Tensile testing Compression testing Material testing Component testing Plastic and metal testing Parts testing Automotive testing Quality assurance Research and development Scope of delivery: 1 × Zwick / Roell Z005 5 kN Allround table-top Machine electronics and handheld control unit PC workstation with testXpert II Testing and clamping tools Load cell / sensor technology SAIM positioning table Documentation and accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Signs of wear and tear due to age and use are present The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: good (used), Device tester, power supply Fodpscdlt Sofx Akyspn -For: 15V devices -Measuring range -Measuring current: max. 300 mV -Dimensions: 250/260/H120 mm -Weight: 1.9 kg

Condition: excellent (used), For sale is a professional Vötsch VTL 7010 climate chamber, designed for conducting temperature tests and simulating environmental conditions. The device is used in laboratories, quality control departments, research and development centers, and for testing electronic, automotive, and mechanical components. The chamber is in good working order – the touchscreen starts up correctly and displays the main menu and the current operating temperature, as confirmed by the photos. Technical specifications: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 7010 Year of manufacture: 2010 Temperature range: -70°C to +180°C Heating/cooling rate: approx. 3.5 K/min Refrigerant: R404A – 0.8 kg R23 – 0.2 kg Power supply: 230 V AC, 50 Hz Rated power: 3.5 kW Rated current: 15.2 A Operating pressure: 8 bar Control via a color touchscreen Working chamber made of stainless steel Door with a viewing window Adjustable internal shelves CE marking Applications The device is ideally suited for: temperature tests, material testing, testing electronics and components, durability tests, Fsdjzi T Nhjpfx Akyspn quality control, research and development work. Condition: used, functional, control panel operates correctly, internal chamber is clean and well-maintained, normal signs of wear and tear, sold exactly as shown in the pictures. Included: Vötsch VTL 7010 climate chamber, 2 perforated shelves, built-in control panel.

Year of construction: 2014, condition: used, Year of manufacture: Mar 2014 New: No Serial number: 1086683 complete tank for fridge unit taken from a schmitz cargobull good condition Fjdpfx Aksv Rn N Asyjpn