Used Wall Line for sale (13,861)

Condition: good (used), 1 x Carrot Line and Grader system Can also be used for potatoes, onions, beet root and brussel sprouts etc. System will be coming out of production end of May/early June. All equipment has had a full service and checked over during the spring period for the coming year. Haith Screen Bits Remover. The Screen Bit Remover continuously removes broken fragments of crop and debris from the produce flow. Carrots are transferred onto a traveling screen with a set size aperture. As the screen is conveyed forward, two full-width agitators gently move the crop causing any bits and debris to drop on to a waste conveyor below where the produce is taken over the end. The screen and agitator speeds are variably controlled individually to suit the various crop conditions. Grader / sorter Odenberg Titan 2 automatic camera grading system – installed in 2008. Titan 2 Sorter 6002.2, 3-way carrot sorter. The first sorter removes product that is not usable, damaged etc to the waste line. The second sorter removes short carrots, twisted and misshaped which are sent directly to the value tank. All the rejects go through the positive sorting area and the grading operative throws back any product that is fit for value sale. High capacity and low maintenance sorting machine Flexible sorting machine with gentle handling assured Quality control and feedback accessible through intuitive touch screen Consistent long-life accuracy. Grading Station. The grading operatives throw out any unusable product to the waste line via the positive grading area. Two to four graders can operate here depending on the quality of the produce. Wyma Lift Roller Sizing Grader – installed in 2019 The product is divided into five grades. Gjdev I S D Sspfx An Rebl 500g, 0-25mm, this goes to the value tank. 1kg, 25 – 42mm max. Loose min 30 – 45mm max. Lumpers, min 45mm upwards. Oversize. The Wyma Lift Roller Sizer is a diameter grader suitable for a wide range of fruits and vegetables including carrots, potatoes, parsnips, beets, citrus, onions, bulbs, brussel sprouts, rutabaga and other round or tubular products. It is extremely versatile, offering multiple size outputs at high capacity in one machine. It can cater for a large range of product sizes and shapes through a selection of different roller options. Product size ranges, or size bands, are created by adjusting the spacing between the rollers, at defined locations, along the length of the machine. The Lift Roller Sizer is made from stainless steel and food-grade plastic materials. Five Lift Roller Conveyors. All supporting framework available. *Video available on request* Located in Wexford, Ireland. Buyer to collect – machinery will be dismantled and loaded to your vehicle. UKFM2-6653

Condition: excellent (used), Year of construction: 2022, Multihead Weigher & Pouch Bag Filling / Sealing Line. Can mix three different products of different weights in the one pouch bag. Consisting of the following. 24 head weigher, sus304, 3-mix, 3 top cones, 100 degree flat chute, 2.5L dimple plate, touchscreen, photo sensor Pouch Machine Change Parts Gantry with stairs 3 infeed elevators Ice Viper Printer Set of wash walls to suit 2 x Cross feed conveyors Gbedpfx Anjvw Egrs Rel All manuals and spare parts included Can be seen running In excellent condition

Condition: excellent (used), Year of construction: 2022, Foil Pie Line Rinc Rijkaart 5 wide Gsdpfsxu Duxjx An Robl The line is commissioned but we do not have customers for foil Pies 2022 Machine date only trials have been made on the machine. Product Ø 110 mm round pie, 40 mm height – 5 products across – 125 prod/min, Filling weight approx.. 170 grams.

Year of construction: 2016, condition: good (used), for sale: Complete Niverplast packaging line Godpfx Aex Ari Hon Rsbl Year of manufacture: 2016 1. Manual infeed Niverplast 2. Depanner for baguettes from AUXPAMA 3. Metal detector 4. Reject system 5. Counter + speedbatcher Niverplast 6. Combiplast Niverplast 7. Boxloader Niverplast 8. Varioseal Niverplast 9. Metal detector 10. Pallet sealing device 11. Conveyor systems Niverplast Full documentation, layout, and specifications available. If you have any questions or comments, please feel free to contact me. Inspection on site is also possible. Dismantling and transport can be offered. Kind regards, Leo Holland

Condition: good (used), Overall dimensions: 5400 x 1500 x 720 mm Track length: 9000 mm Gbjdpfx Aenqyz Ijn Rol Drive: electric

Condition: repair required (used), Sheet Metal Processing Unit, Decoiler, Straightener, Guillotine Shear, Reinhardt Maschinenbau GmbH Ras 228.60 Used Machine Manufacturer: Reinhardt Maschinenbau GmbH Model: Ras 28.60 Maximum Sheet Width: 1500 mm Maximum Sheet Thickness: 1.5 mm Total Weight: 9350 kg Features: Decoiler Measuring Unit Gbedovkbrqopfx An Rel Sheet Straightener Guillotine Shear Electrical Data: Voltage: 400 V Power: 12 kW Frequency: 50 Hz Current: 35 A Note: The control panel display is not functioning.

Condition: used, Year of construction: 2006, Overview  This complete filling line was manufactured in 2005 by German company Breitner Abfüllanlagen GmbH. The line is designed for mayonnaise, dressing and ketchup in glass and PEHD bottles with diameters up to 110 mm. It is reported to be in good condition. Information about the reason for sale and exact availability was not provided. Technical data Capacity: 212 ml round plastic: up to 2,700 bph 250 ml oval plastic: up to 2,700 bph 1,000 ml round plastic: up to 900 bph 1,000 ml oval plastic: up to 900 bph Application: Glass & PEHD (plastic) Neck finish: Screw-on caps Ø 30–40 mm Twist-off caps Formats: 212 ml, 250 ml, 1,000 ml Scope of Delivery  Inductive Linear Filling Machine | Breitner | IDL 2047 | 2006 | 15–45 b/min Conveyor | Breitner | TP 6052 | 2006 | — Capping Machine | Breitner | VS 5012-S | 2006 | Up to 60 b/min Rotary Sorter | Breitner | DS 8003 | 2006 | — Feeder | Breitner | SFB 8001 | 2006 | — Conveyor | Breitner | TPK 6042 | 2006 | — Labeller | Breitner | EM 4322 | 2006 | Up to 70 b/min Conveyor | Breitner | TPE 6032 | 2006 | — Gbodeyighiepfx An Rjl

Condition: used, 01. Product to be filled “CSD” 02. Type of Bottle Gbjdovgt Upopfx An Rel RoundBottles 03. M.O.C. of the Bottle PET Bottles 04. Fill Volume / Bottle sizes 500ml 05. Type of Caps Screw Caps 06. Type of Labels BOPP 07. Output required 416 Bottles Per Minute on 500 ml     BLOWER SIPA 16 CAVITIES 2007 WITH MAINTENNACE OPERATION: Used blow molding machine for PET bottles with production capacity up to 25,000 bph with the 500ml format. Year of construction, 2007. Used blower complete with Octagon tipper, Air recovery system, preform hopper. This machine is immediately available for sale and in case of request we can carry out pre-production maintenance. Detached from production in fully functional status is excellent opportunity for used equipment. We will build new neck personalization for pco 1881 We will build two new set of blow mould as per your request. Air conveyor system NEW/used revised 2024   NEW RINSER /FILLER/SCREW CAPPER, SPORT CAPPER: Auto Rotary 70 Head Rinser Cum 70 Head Counter Pressure Filling Cum 15 Head Rotary Screw Cap Sealing Machine,AND 15 HEAD SPORT CUP system Model Uinibloc : 70x70x15x15, fitted with Disc cap feeder, chute&shoe, SS safety hood, PLC/HMI of Schneider make, Electronic BPM meter & Counter, sensor at in feed & out feed. Fitted with one set of change parts of 250ml PET bottle. All Product Contact Parts like Tank, Valves & all product contact parts will be SS316Grade. Output – 416BPM on 500 ml bottle. Fully Automatic Bulk Cap Elevator Additional Set of Change Parts If Required RINSING SECTION : TOP OF THE ROTARY RINSSER S. SLAT CHAIN CONVEYOR Body fabricated out of pre-polished S.S. Sheets, of 8’ length for carrying empty bottles to water rinsingnozzles and rinsed bottles to the Filling Machine. BOTTLE GRIPPING HEADS The gripping heads hold the bottles by neck. The bottle carrying grippers are supported by carousel thatby turning makes the grip lever arms slide on a fixed helical guide. In this way the bottles areturned upside down to have the openings atthe bottom to coincide with spray nozzle. AIR CLEANING PROCESS The bottles when rotated are brought into theline with the fixed nozzle in such a way thatits opening partially contains the nozzle. Airjet cleaning air sprayed inside the bottle forpresettime. VACUUM PROCESS The bottles when rotated are brought into the ine with the fixed nozzle in such a way that its openingpartially contains the nozzle.

Condition: used, Used Wine Filling Line 2000 Complete line for still wine filling, consisting of the following machines: Used Depalletizer Automatic depalletizer branded Oma model Depalblock 2000 built in 2002. It reaches speeds of 6000 BPH for the 0.75 lt format. In addition to that it works formats such as bottles of 0.375 – 0.75 and 1.50. This used depalletizer is supplied with all its accident prevention protections and also the user manuals. The loading is carried out from above and there is neither an interlayer removal system nor a pallet magazine. Instead, there are spare parts available. Measurements: Length: 2950 mm Width: 2133 mm Height: 2530 mm Weight: 1550 kg. Volt consumption: 380 Kw: 2 Hz: 50 Used Filling Monoblock of this Used Wine Filling Line The manufacturer of this monoblock is Ave Impianti, and it is an Oceanic 16-16-4 model. It works with the same formats from 0.375 – 0.750 – 1.500 at a speed of 3800 BPH. The direction of rotation is clockwise, and the state is currently in production. This machine is currently used for filling still wine. This machine includes also a rinsing machine that has 16 forceps and does 2 treatments. Then follows the 16-valve filler with a fixed nozzle. Finally, there is the 4-head cork stopper that can process a diameter of up to 26 mm. There are several spare parts for this machine. Measurements: Length: 4600mm Width: 2300mm Height: 3400mm Consumption Volt: 380 Hz: 50 Used Capper The used Capper is Bertolaso branded and the model is Alfa 110 Inox from 1995 with 1 head. Clockwise rotation direction, is always complete with all available manual and accident prevention protections. The operational status is currently in production and the type of container handled is 0.75 liter Bordolese. The cap type is Stelvin and the size is 30×60, while the neck type is standard. Measurements: Length: 800mm Width: 900mm Height: 2600mm Volt consumption: 380 Used Capsuler This machine is branded Robino and Galandrino model Fenix 2 of the year 2000. It is a used capsuler with 2 heads and the speed reached is 6000 BPH with the following formats: 0.375 – 0.750 – 1.500. There are safety protections and manuals are also available with the necessary instructions. The state is currently in production. The specific product treated is still wine. The types of capsules used are the Enoterms in Polylaminate. Weight: approx. 1800 kg Consumption Volt: 380 Kw: 4.5 Hz: 50 Used Labeling Machine of this Used Wine Filling Line Branded Kosme Model Extra Fix 8T S3 E3 + S2 E2 Adhesives year 2005. Speed of 3000 BPH on the treated formats of 0.375 – 0.750 – 1.500 L. Gbedpfxovgutts An Rel Machine currently in production in the line with its accident prevention protections and user manuals available.

Condition: used, Used Isobaric Complete PET Line for Soft Drinks 6000 bottles/h The line consists of: A Kosme KSB 4 L PET blow molding machine from 2004 with a speed of 6800 bottles/h for 0,5L, 6000 bottles/h for 2L, 5200 bottles/h for 2,5L Air conveyor from blowing machine to filler. MAS Mixer from 2004. MAS rinser, filler and capper from 2004, renovated in 2015, capacity 0,5l – 10.000 palack/h, 1,5l – 5000 units, rinser cranes – 32 units, filling valves – 32 units, cork heads – 8 units. BAT forum labeller type EBI 07 year 2006, capacity 1500-6500 units/hour, dimensions 2450x90x950-1300. BAR forum packer year 2005, capacity 12 packages/min. Gbsdpovguyaofx An Rel Conveyors, Cyklop International automatic stretch wrapper type GL215 year 2003, turntable 8 mm steel plate resting on 12 supporting rollers, feeder ramp 5 positions possible, power supply 230/440V, three-phase, 50Hz+Neutral; pallet load length/width max. diameter of 1675mm (*2000mm), pallet height – 2200mm (*2600mm), pallet weight max 1500kg (*2000 kg)

Condition: used, Processing and Filling Line for Dairy Products up to 20,000 L/Day This processing line efficiently manages volumes between 15,000 and 20,000 liters of milk per day. Consequently, it ensures high efficiency and the highest quality of finished products. Its capacity thus enables a high daily production return, which is crucial for large-scale operations. Packaging Capabilities Gbsdpfxsvgvrwj An Rel Moreover, the line’s specialized packaging system adeptly handles various types of dairy products. For example, workers pack milk in 1.0-liter PVC bags at a rate of 2,400 pieces per hour. Additionally, they package yogurt and kefir in 410-gram and 180-gram containers at a capacity of 3,000 pieces per hour, as well as in 0.5-liter and 1.0-liter PET bottles at a rate of 1,000 pieces per hour. Furthermore, workers package sour cream in both 1,000-gram containers and bowls, each at a capacity of 3,000 pieces per hour. Similarly, they pack cheese in 5.0 kg and 10.0 kg containers for fresh cheese, and in vacuum foil from 500 and 1,000 grams for sliced cheese. Equipment Specifications Manufacturers in Italy, Slovenia, and Serbia constructed the equipment between 1999 and 2016, showcasing the quality and durability of the machines. Specifically, the milk reception unit features digital counters and foam removal systems updated in 2014. It includes horizontal and vertical tanks with capacities up to 3,200 liters, ideal for storage and cooling. Fermentation Units and Filling Lines Insulated duplicators with double walls and planetary mixers support the line’s fermentation functionalities, which are essential for maintaining product uniformity during fermentation. Likewise, automated filling lines distribute sour cream, yogurt, and milk in various packaging formats efficiently, thereby maximizing productivity and reducing downtime. Equipment Complements and Maintenance Additionally, the line includes accessories such as a triblender for powdered milk, vacuum packaging machines for cheese, and cooling systems for warehouses. These components are crucial for extending preservation and ensuring food safety. The team has regularly serviced and maintained the equipment until production ceased in 2020, thereby demonstrating a consistent commitment to maintenance and operational efficiency. In conclusion, these details highlight the line’s capability to produce high volumes and its configuration to ensure versatility and reliability over time, which are key for those operating in the large-scale dairy sector. List of line components: Milk receiving unit Digital counter with foam remover (2014) Horizontal tank (lactofreeze) capacity 3.200 l cooling on freon – 3 pcs Vertical tank capacity 3.000 l – 2 pcs Unit for pasteurization Pasteurizer (flow) with retainers  capacity 2.000 l Separator (self-cleaning), capacity 2.000 l Homogenizer capacity 2.

Condition: used, Used bottling line SPECIJALKA for carbonated beverages 3000bph The SPECIJALKA used bottling line for carbonated beverages at 3000 bottles per hour integrates a rinser, a filler, and a capper. Moreover, this machine fills bottles of various capacities, using both PET and glass. The technical specifications therefore clearly address the needs of technicians and experts in the bottling industry. Main technical features of the Bottling Line SPECIJALKA The Bottling Line SPECIJALKA operates with 32 filling valves, producing around 2500 bottles per hour for 2.0-liter bottles and up to 3000 bottles per hour for bottles between 0.5 and 1.5 liters. The 28 mm bottle neck works well for both PET and glass. As a result, this versatility allows easy adaptation to different production needs. The capper, which uses 8 heads, simultaneously applies 28 mm plastic caps quickly and precisely. Labeler and saturation system The line uses a linear labeler to apply nylon labels with speed and precision, optimizing the labeling process. Additionally, it includes a saturator/mixer that ensures efficient carbonation, delivering the right amount of CO2 in each product. Furthermore, the combination of these features improves the overall performance of the system. Gsdpfx Anovgvdgj Robl Usage and maintenance status The machine has remained unused, and since 2008, we have kept it overhauled and serviced to maintain its perfect condition. Currently, we store it in a ready-to-use state. The installation of this bottling line requires approximately 200 square meters of space. Thus, this ensures an optimal arrangement of the components. Rinser and filler The rinser  of the Bottling Line SPECIJALKA operates with 20 heads and secures the bottles under the neck to prevent damage during washing. Consequently, this method prepares the bottles for filling. The filler, equipped with 32 valves, fills the bottles quickly and accurately, enhancing production efficiency and reducing product waste. Therefore, this process improves both speed and quality in the bottling operation. Conclusion of the Bottling Line SPECIJALKA The SPECIJALKA used bottling line for carbonated beverages at 3000 bottles per hour offers a complete, versatile solution for high-scale production. It handles both PET and glass bottles while providing an efficient labeling system. In conclusion, it presents an excellent choice for companies aiming to boost production without sacrificing quality. Ultimately, this system increases operational efficiency while maintaining flexibility in production requirements.

Condition: used, Used bottling line PROCOMAC for still and sparkling water up to 12000 bph We offer a complete bottling line for natural and carbonated mineral water, specifically designed to meet the complex needs of technicians and industry experts. This solution not only handles bottle formats from 0.5 to 2 liters but also produces up to 12,000 bottles per hour, ensuring high reliability and excellent performance.. SIPA Blow Molder and Preform Management The SIPA SFR 12 blow molder, manufactured in 2000, initiates the production process. It efficiently manages preforms using a dumper and elevator-orienter. Furthermore, the integrated cooling chiller and four sets of molds allow the machine to produce bottles of various sizes with both precision and flexibility. As a result, it ensures smooth operations throughout the initial production phase. Gbedpfx Anovgu Tyj Rel PROCOMAC Monoblock: The Core of the System The PROCOMAC monoblock unifies three critical bottling functions into a single system. First, the PROCOMAC GRIPSTAR 2R rinser cleans bottles thoroughly, preparing them for the filling process. Then, the PROCOMAC FILLSTAR PET filler quickly and accurately fills bottles with natural or carbonated mineral water. Finally, the PROCOMAC 10-head PICK & PLACE capper applies caps securely and efficiently. Moreover, the saturator and CIP (Clean-In-Place) system maintain hygiene standards and streamline maintenance operations. These additional components not only enhance the monoblock’s efficiency but also ensure reliable performance during production. Transport and Packaging Systems The PELACCI P.13.8.5 cap elevator consistently supplies caps to the system without interruptions. In addition, the PE ROLLMATIC CI 540 12T labeler applies labels accurately to bottles of different formats. Subsequently, the ZAMBELLI LFT 50 shrink wrapper quickly packages bottles into bundles, while the COMAG H 55/1 handle applicator attaches handles to bundles for easier transport. Furthermore, the LEVATI ARTIS palletizer organizes bundles onto pallets with precision. Similarly, the ROBOPAC HELIX HS 30 pallet wrapper wraps the load securely to protect it during transportation. Lastly, the EIDOS labeling system prints and applies labels directly on the production line, allowing for full customization, which ensures adaptability to various production requirements. Conveyor Belts for Optimal Flow The conveyor belt system facilitates efficient material flow across the production phases. Specifically, air conveyors move bottles swiftly, while dedicated belts transport bundles and pallets seamlessly between sections of the line. Consequently, these systems maintain a continuous and smooth workflow, which significantly reduces production downtime. Current Status and Availability This Used bottling line PROCOMAC for still and sparkling water up to 12000 bph operates efficiently and will remain in use until April 2025, when it will be dismantled and replaced. Therefore, we encourage interested buyers to view the line in operation before dismantling to evaluate its performance and condition. Ultimately, this complete and integrated solution delivers reliable and high-performing bottling capabilities for industrial water production.

Condition: used, Used Complete Filling Line Ada 2000 FILLING LINE FOR CARBONATED AND NON-CARBONATED DRINKS Manufacturer: Specijalka – Ada – Serbia – 2000 Capacity: 1.200 bph x 2 L PET Equipment specification: -FILLER 24 valves Gedpfx Ajvgur Nsn Rjbl -CAPPER 1 head -LABELING – paper cut labels, cold glue -SHRINK WRAPPER – semi-automatic, manual stacking of bottles -SATURATOR -4 sugar bowls -6 CO2 bottles -Air dryer The equipment is in perfect condition, turned off in 2019. At the overhaul in 2018, all bearings were replaced.

Condition: used, Used Complete Bottling Line Procomac 2000 1. Blow-mouldingmachine Typ SIPA SF12/8 (2002) 2. Chillerfor SIPA machine (2002) 3. Compressor Typ Kaeser (2002) includes: Air receiver 1000 liter, 16 bar, Mikrofilter/Carbonfilter, Screw-compressor CS121/12 bar Air receiver 1000 liter, 45 bar, Pre-filter HP-Compressor (Booster) N753-G HP- Airdryer THP 142 48 Microfilter, Carbonfilter 4. 40m Airconveyor Typ Procomac (2002) 5. Rinser-Filler-Capper24/24/6 Typ ProcomacMuvitec(2000) Capper also for sports-cap incl. 6. Labellingmachine Type Futura, hotglue (2000) 7. Bottleinspector Type Logis&Controls (2000) 8. Bottle transporter Krones (speed-controled) (2000) 9. Handle Applicator Twinpack (2000) 10. Packingmachine & Shrinktunnel Kettner (2001) 11. Packing-robot Profipac (2005) 12. Wrappingmachine Robotec (2002) Formats 1. O.5 liter bottle height 220mm Diameter 66mm Label 215 x 70mm 2. 1.5 liter bottle height 334 mm Gjdpfxovgulce An Rsbl Diameter 95 mm Label 285 x 100mm

Condition: used, Used filling line for edible oil up to 1800 bph Introduction The filling line for edible oil up to 1800 bph represents an advanced technological solution in the bottling sector. This system, branded Almanah Alman, guarantees efficiency and reliability essential for modern production needs. Capacity and Dimensions Gbodpfx Ansvguags Rsl Equipped with a production capacity of 1800 bottles per hour for 1 liter PET containers, this line stands out for its high productivity. The overall length of the line is 6.3 meters, an important detail for planning the installation space in its warehouse. Filler Specifications in the Filling Line Used for Edible Oil The heart of Filling Line is the 18-valve filler, which operates through a pressure filling system. This method ensures rapid and efficient distribution of the product in the filling line for edible oil. Which ensures the maintaining, integrity and quality of the edible oil. Capper and labeller The capper is equipped with 6 heads and fits plastic pressure caps, ensuring safe and precise closure of bottles. The label maker, on the other hand, applies a paper label using liquid glue, allowing a clean and professional finish to the product in the used filling line for oil. Installed power needed by the filling Line Used for Edible Oil The line requires an installed power of 3 kW, an aspect to be considered for energy optimization and sustainability of the production process. This feature underlines the energy efficiency of the filling line used for edible oil in the industrial context. Conclusion The filling line used for edible oil up to 1800 bph Almanah Alman represents an ideal technological solution for those seeking efficiency and reliability in the bottling sector. With its high production capacity and advanced technical specifications, this machine is able to meet the most demanding needs of edible oil producers.

Condition: used, Used end of line TMG up to 1200 box-hour Case Erector with Hot Glue Sealing Firstly, the TMG case erector features hot glue bottom sealing. It includes, notably, a Nordson glue heater. This allows for the formation and sealing of various carton sizes. Additionally, the machine has a painted iron frame. It also comes with safety protections. Importantly, it is capable of producing about 1200 cartons per hour. This equipment complies with CE standards as of 2018 and is provided with a manual. Consequently, this offers an efficient packaging solution. Case Packer with Mechanical Movement Moreover, the TMG case packer has a mechanical movement on axes. It’s designed for precision and adaptability. It can have, for example, two bottle grab heads (6+6) or one with 12 heads. This setup accommodates different bottle diameters. Furthermore, the entry bench is made from stainless steel, indicating a robust machine. With a rate of about 480 cycles per hour and equipped with safety protections, it adheres to 2018’s CE regulations. Gbsdpfx Anevgt N Ts Rjl Case Sealer for Efficient Sealing of the End of line TMG Furthermore, the TMG case sealer ensures accurate top sealing with hot glue. It includes an automatic carton separator. A pneumatic piston operates the rear flap closure. It allows for manual adjustments for various carton sizes. Equally important, it achieves a rate of 1200 cartons per hour. This machine emphasizes sealing efficiency and reliability. With lateral safety protections, it meets the 2018 CE standards and is also provided with a manual, presenting an optimal solution for end-of-line operations. Conclusion of the End of line TMG Lastly, choosing “Used end of line TMG up to 1200 box-hour” machinery is strategic for enhancing packaging efficiency. Furthermore, the integration of a case erector, packer, and sealer meets not only safety standards but also offers operational flexibility. These machines are ideal for enterprises aiming to boost productivity and uphold high-quality benchmarks. In summary, TMG’s technology features comprehensive safety and operational efficiency, effectively addressing the demands of the bottling industry and ensuring top performance and reliability over the long term.

Condition: used, axle configuration: 3 axles, first registration: 03/2003, loading space length: 13,600 mm, loading space width: 2,480 mm, total length: 13,900 mm, total width: 2,480 mm, total height: 3,100 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2003, Equipment: ABS, = Additional Options and Equipment = - EBS = Remarks = Number of axles: 3, unladen weight: 9,800 kg, gross weight: 38,000 kg, type of chassis: complete chassis, chassis material: steel, kingpin size: 2 inch, suspension type: full air suspension, ABS, EBS, body year of manufacture: 2003, extendable chassis: center, extendable length: 600, axle type: MERCEDES-BENZ, LAST AXLE FORCED STEERING / 6M EXTENDABLE, 19,930 TOTAL / LIFT AXLE = Further Information = General Information Cab: Day cab Registration: KLEYN1 Driveline Fuel type: Diesel Transmission Transmission: Manual Axle configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread left: 13 mm; tire tread right: 12 mm Axle 2: Tire tread left: 13 mm; tire tread right: 14 mm Axle 3: Steering; tire tread left: 12 mm; tire tread right: 13 mm Weights Empty weight: 9,800 kg Payload: 28,200 kg Gross vehicle weight: 38,000 kg Environment Emission class: Euro 0 Condition General condition: fair Technical condition: fair Visual condition: fair Damages: none Godpfxowfw E Us An Robl = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European brands, years of manufacture and price categories. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing inventory • Recognizable quality • Good pricing • Reliable business transactions • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are quickly arranged • Expert technical services • The security of 'recognizable quality' • And more.... Please visit our website for special offers and our complete stock list. Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 2013, machine/vehicle number: LC630, Used KHS Beer can line - 48.000 CPHTechnical Specifications & Performance DataThis KHS complete beer can bottling line is engineered for high-speed beverage production and industrial packaging performance. It is a second hand, used bottling line configured for aluminum cans with robust components across depalletizing, filling, seaming, pasteurization, inspection, packaging, and palletizing. The line delivers consistent throughput and quality suitable for large-scale beverage production.Production speed: up to 48,000 cans per hour at 0.5L; 41,000 cans per hour at 0.568LContainer types: Aluminum cansFormats: Compatible with 0.5L, 0.568L can formatsCan dimensions: Diameter 66.30 mm; Height 168 mmLid specifications: Aluminum; Diameter 59.44 mm; Height 2.07 mmFilling technology: Volumetric pressure filling with MID (magnetic inductive flow meters)Seaming technology: High-speed multi-head can seamerPasteurization: KHS INNOPRO KZE 250 flash pasteurizerInspection: KHS Innocheck CUB fill level and closure inspectionPrimary installation year: 2013 (pallet wrapper 2020)Manufacturer: KHS engineering with complementary equipment from leading suppliersAdvanced Automation & Control SystemsThe line integrates modern automation features typical of KHS bottling equipment, ensuring stable high-speed operation and consistent product quality. Automated lid feeding and distribution support uninterrupted seaming, while inline inspection and coding systems help maintain traceability and quality control.Automated depalletizing, conveying, and palletizing for continuous material flowRecipe-based operations and quick adjustments for format changesInline inspection for fill height and closure integrityContinuous inkjet coding for batch and date markingDynamic weight control for in-line verificationSafety guarding and interlocks across critical stationsProduction Line Integration CapabilitiesThis complete packaging machinery setup is designed for cohesive end-to-end operation, from empty can depalletizing through finished pallet wrapping. Conveyors and accumulation are matched for high-speed can handling, and the shrink packer and palletizing cell deliver strong downstream packaging performance.Inline operation with synchronized conveyors: can, pack, and pallet transportFormat change capability for 0.5L and 0.568L cansSuitable for beer production and compatible with aluminum can handling best practicesModular integration of depalletizer, filler, seamer, flash pasteurizer, inspection, shrink packer, palletizer, and wrapperMachine Condition & Maintenance HistoryThe line is in very good condition and has been regularly maintained. It is already dismantled, securely packed, and ready for shipment to reduce commissioning timelines at the new site. Availability is scheduled for Q1 2026, facilitating advance planning for capacity exp... Gbsdpfx Anoy Rxx Hs Rsl

Condition: used, Year of construction: 2018, Overview This can filling line consists of equipment from Krones, KHS, Ferrum, Kisters, Hein, Strema and additional line components. The line is designed for beverage production in cans with a nominal capacity of approximately 60,000 cans per hour. The main filling and closing section includes a KHS Innofill EMD 108S filler and a Ferrum F812 can seamer, both rated at 60,000 cans/hour. The line also includes modern inspection and handling equipment, including a Krones Checkmat from 2023, several Krones machines from 2018, and a Strema A5000BII from line covers the core process from can handling and filling through seaming, inspection, pasteurization, packaging and conveying. Several machines have been modernized or upgraded over time, making the line a combination of proven core filling technology and newer inspection, packaging and auxiliary equipment.   Technical Data Capacity: approx. 60,000 cans per hour Container type: Standard cans 500ml & 330ml Condition: used line, very good condition, well maintained Application: Beer, Carbonated soft drinks   Scope of Delivery Can Depalletizer | Krones | Pressant | Automatic can depalletizing system | 2018 Empty Can Inspection | Krones | Cantronic 709 | 2018 Can Rinser | Hein | Can rinsing system | 1978 Can Filling Machine | KHS | Innofill EMD 108S | Can filling machine for beer and carbonated soft drinks | 1997 Can Seaming Machine | Ferrum | F812 | Can seaming machine | 1997 Cap / Lid Feeding System | CSW |Lid feeding system for can seamer | year tbd Fill Height Inspection | Krones | Checkmat 731 | 2023 Tunnel Pasteurizer | KHS | Innopas | Tunnel pasteurization system | 2001 Can Dryer | Gesete | BasicLine | 2018 Fill Height Inspection | Krones | Checkmat 707 | Fill height inspection system | 2018 Tray and Shrink Packing Machine | Kisters+ZEVA | 197/60+ST/II-600V ; completely overhauled in 2015 | 1992 Grouping Station | Krones | Robobox T-GS | Product grouping station before palletizing | 2018 Palletizer | Krones | Modulpal | Automatic palletizing system | 2018 Pallet Stretcher / Wrapper | Strema | A5000BII | 2021 Pallet Labelling Machine | Logopak | 850 P3 T02 P06 | 2022 Pallet Conveyors | Krones | Pallet transport system | 2018 Tray Conveyors | Krones | Tray transport conveyors | 2018 Can Conveyors | Krones | Can conveyor system | 2002 Additional Information The tray and shrink packing machine was originally manufactured in 1992 and completely overhauled in 2015. The line combines proven core filling technology with several newer Krones handling and inspection components. Offered used, as-is, without guarantee. Godpfx Ansy Rxtqj Robl

Condition: used, Year of construction: 1994, material width 2000 mm coil weight 35,0 t material thickness 0,6 - 2,5 mm coil internal diameter - 610 mm coil external diameter 900 - 1900 mm material cross-cut 1600 x 2,5 mm² no. of straightening rolls 13 straightening roll diameter 50 mm speed 0 - 60 m/min power requirement 81,0 + kW weight of straightening machine 14,5 t coil line consisting of: - decoiler make Schleicher, Type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear Gbodpfjy Rutyjx An Rol - straightening machine make Schnutz, Type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, Type WV-SYS-A 160-2000, yom 1994

Condition: used, Year of construction: 1997, material width 300 mm coil weight 2 x 1,25 t material thickness 0,4 - 1,2 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm no. of straightening rolls 9 straightening roll diameter 30 mm number of draw-in rolls 2 roll diameter 30 mm speed 3 - 30 m/min feed length 0 - 9999,9 mm power requirement 3,0 + 2,5 kW weight of decoiler 0,7 t dimensions decoiler (WxDxH) 2,1 x 1,4 x 1,5 mm weight of straightening machine 0,45 t dimensions straightener (WxDxH) 1,5 x 0,8 x 1,1 mm weight of the feeder 0,4 t dimensions feeder (WxDxH) 1,2 x 0,8 x 1,1 mm Universal straightening machine SC 12-FQ with infinitely variable drive double decoiler 2352 B-FPS Godoyx Iknopfx An Robl WITHOUT drive, with hydraulic expansion, pneumatic lag brake electronic roll feed WAV-RDS-2Z, modell 1082 B with AC-Servomotor, pneumatic intermediate lifting of the rolls

Condition: used, Year of construction: 2009, operating hours: 5,000 h, machine/vehicle number: LC631, Used Tetra Pak TBA19 330 Prisma line 9000 bph - 2008Technical Specifications & Performance DataThis used bottling line is a Tetra Pak A3 Flex V300 configuration designed specifically for 0.33 L Tetra Prisma cartons, ideal for second hand industrial packaging and beverage production environments. Engineered for aseptic operation, it supports reliable high-speed packaging for dairy and juice applications with consistent quality and uptime.Manufacturer: Tetra PakMain filler: TBA 19, Version 300VProduction speed: Up to approx. 7,500 packs/hourFormat compatibility: 0.33 L Prisma (330 ml)Container type: Carton (Tetra Brik/Tetra Prisma)Filler year: 2009Capper: CAP 30 for Dream Cap (YOM 2019)Packer: TCBP 32 cardboard packer (YOM 2012)Ancillary equipment: Conveyor line, line controller, Domino printer, paper trolleyAseptic packaging: Yes (for long shelf-life products)Reported hours: Filler approx. 5.000 h; Packer approx. 30,000 h; Capper approx. 25,000 hAdditional component: Bonino mechanical feeder (2014) — 460 V, 0.70 A, 60 Hz, approx. 0.8 kWAdvanced Automation & Control SystemsThe line features integrated automation for synchronized operation across filling, capping, packing, and conveying. The line controller coordinates start/stop, speed matching, and fault handling, while the Domino printer integrates for inline coding without impacting throughput. Safety interlocks and guarding protect operators and maintain hygienic integrity during beverage production.Centralized line controller with coordinated speed controlPrinter integration for date, lot, and traceability codingOperator safety protections and interlocked guardsFormat-dedicated setup for 0.33 L Prisma to ensure fast, repeatable changeoversProduction Line Integration CapabilitiesDesigned as a complete packaging line, it integrates seamlessly from aseptic filling to secondary packaging. Conveyors are configured to maintain gentle carton handling and stable flow to the packer. The platform is optimized for dairy and juice, supporting consistent sealing, Dream Cap application, and case packing for distribution.Inline operation across filler, capper, printer, conveyors, and packerCarton handling tailored to 0.33 L Prisma geometrySuitable for milk and juice production workflowsDownstream-ready case packs from the TCBP 32Machine Condition & Maintenance HistoryThe line was previously used for milk and juice and is reported in post-maintenance condition. Operating hours indicate regular industrial use typical of second hand bottling equipment. The published figures support informed planning for preventive maintenance and remaining useful life.Status: After maintenance, ready for operationFiller hours: approx. 24,800Packer hours: approx. 30,000Capper hours: approx. 25,000Ope... Gbjdpfey Rrirox An Rjl

Year of construction: 2001, condition: used, Hard cover book line VBF / Muller Martini Diamant Year: 2001 Description: - Semi automatic setting - Book measuring table - Stand-alone pre-heating device: IR Gbsdpfxoyid Nwo An Rsl - Infeed conveyor - Starfeeder - Rounding and backing station - Glue unit - Gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case infeed device - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump - Hotmelt nozzle glue system for joint gluing in casing-in section Building in machine VBF / Muller Martini EP 680 L Year: 2000 Description: - Book forming station - Delivery - Delivery to the left Book stacker VBF / Muller Martini BLSD 600 D Year: 2001 Book block format (max): 380 x 270 x 80 mm (hxwxt) Book block format (min): 100 x 100 x 4 mm (hxwxt) Size range opened case (max): 660 x 390 mm Size range opened case (min): 190 x 105 mm Max. mechanical speed: 3.600 cycles / hour Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2017, operating hours: 1,717 h, total height: 2,700 mm, total length: 40,000 mm, total width: 2,400 mm, Colour: Grey Price: On request The blade unit has a flange connection so fixed blade ( max 1000mm diam ) with 55kw at 4000rpm 5axis unit 12kw is a milling group with toolchanger C1: 540° B1: 250° C2: 540° B2: 90° Installed dimensions: 19300x7100xH4400mm Godpfxswf Hw Hs An Rsbl - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 904B0018 - Operating hours: 1717 - Number of milling spindles [pcs.]: - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 2 - - Main motor power [kW]: 55 - Saw unit present: Yes - Table length [mm]: 14400 - Table width [mm]: 3500 - X-axis maximum stroke [mm]: 5000 - Y-axis maximum stroke [mm]: 15870 - Z-axis maximum stroke [mm]: 1000 - Voltage [V]: 400 - Current consumption [A]: 130 - Power [kW]: 65.0 - Transport dimensions: 40000mm x 2400mm x 2700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets