Used Trumpf Trubend Center 7030 for sale (14,610)

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. The system has been continuously maintained and partially overhauled in 2022. Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Nsdpozu Avzefx Ahkolf Frequency: 50 Hz Noise Emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Type: TruLaser 5030 fiber (L41) Laser power: 5000 watts Year of manufacture: 2012 Control system: Siemens Sinumerik 840 D Working area: 3000 x 1500 x 115 mm Operating hours: 66,934 h / 43,313 h Max. sheet thickness/steel: 25 mm Max. sheet thickness/stainless steel: 20 mm Max. sheet thickness/aluminum: 20 mm Nedszmf R Sopfx Ahkslf Max. speeds: 235 m/min Accuracy: 0.10 mm Length: 8300 mm Width: 4800 mm Height: 2400 mm Weight: 12,000 kg Operating hours: approx. 67,000 hours

Condition: used, Year of construction: 2011, Fully functional Nlodpozd Tlrofx Ahkof

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Available starting September/October. Nodpfx Ahezn N Hgokelf Operating hours: Laser: 35,000 hours.

Condition: excellent (used), Year of construction: 1998, Hours: approx. 45,600 Nodpfszniq Esx Ahkslf 6 axles Location available upon request.

Condition: used, Year of construction: 2011, Technical details: Nodpfx Aszwvcgshkjlf x-axis: 3000 mm y-axis: 1500 mm z-axis: 115 mm laser capacity in Watt: 3000

Condition: good (used), Year of construction: 2003, functionality: fully functional, controller model: Basis Bosch Typ 3, Standard equipment: Machine - Working area 2500 x 1250 mm - Rotatable tool holder Njdpfx Aezv Txpehkolf - Automatic repositioning with clamping device - Automatic tool changer with 19 stations - 2 clamping jaws - Programmable clamping device with pre-selectable - Clamping force - Dividing slide 200x200 mm - Part sorting into 2 containers - 2 good part containers - Ball tables - Tool spray lubrication - Punch scrap extraction - Scrap container - Quick shut-off for hydraulics - 10.4" TFT color screen - 3.5" floppy disk drive - Graphics programming ToPs 2000 - ToPs 2000 - Software package for PC (CD-ROM) - Safety light curtain, 2-beam - RJ45 network connection - Network connection including installation Extended machine equipment - Multitool function - Thread forming function - Marking/fast beading function - Roller tool function - Vibration-damped installation Automation - Loading and unloading device - Extended pull-out for raw material trolley - and unloading platform - Manually movable raw material trolleys - Scrap extraction system - Stop system with spread magnet - Sheet metal thickness gauge - Suction frame for loading - Gripper for unloading

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Work area 3050 x 1550 mm - Drives with maintenance-free three-phase motors - Stable, easily accessible C-frame - Coordinate guidance - Linear magazine with 25 positions for clamping dies and tools - Follow-up device with programmable pressure clamp - Flap for stamped parts 500 x 500 mm incl. sensor - 2 scrap containers (=> not included with part conveyor belts) - Foot pedal for die closing - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axis - Ejection cylinder for laser parts - Fast flap for laser parts 500x500 mm incl. sensor - Adjustable laser cutting support - Slag cone detection TRUMPF Laser - Laser TruFlow 2700 incl. LensLine and optimized standby mode - High-frequency excitation - Closed beam guidance - Fine filtration of compressed air for beam pipe ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device (UTI) - LensLine with condition monitoring - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure clamp position - Tool length compensation - Scrap extraction - Calculation of filling level in the punching console - Stroke counter for punches - Spray lubrication for punches - Level monitoring for tool lubrication Control System - Open control system based on Bosch Rexroth IntraMotion MTX - Integrated technology data - 160 GB hard drive capacity - External control panel with 15" TFT touchscreen - Programmable cutting gas pressure - Teleservice interface via the internet - Automatic shutdown with wake-up function - Production plan Data Transfer - USB interface - RJ45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives - Warping detection - Protection against stray radiation - Compact dust extraction system Extended Standard Equipment - Hydraulic clamping die (4 pieces) - Ball tables (=> not included with brush tables) - Chip container (=> not included with chip conveyor) - Cooling unit (water-air) + Laser TruFlow 3200 incl. LensLine and optimized standby mode + MultiTool function + Thread forming function + MultiShear function Nedezv Twxepfx Ahkslf + Roll technology function + Softpunch function + StripLine function + Active die + Height-adjustable clamping die (4 pieces) + Follow-up cylinder - Vibration-damped installation + Chip conveyor with tilting container + Brush tables with loading and unloading assistance SheetMaster N0140A0054 automation: - Suction frame with 36 suction cups (y-axis = 400 mm) - Movable suction bars (v-axis = 170 mm) - Peeling suction cup - Vacuum sensor - Sheet thickness gauge for double-sheet detection - Central lubrication - TRUMPF control system based on Rexroth IndraMotion MTX - Automatic die closing of the machine + Extended guide rail + Table extension (brush design) + Fixed additional support table on the left (brush design) + Automatically adjustable additional support table on the right (brush design) + Large C-frame for processing oversized parts + Parallel loading and unloading of the SheetMaster during main processing time + Unloading monitoring + Lowerable GripMaster for large formats (3000 x 1500mm) + Scissor lift table (3000 x 1500)

Condition: good (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, laser power: 8,000 W, CNC laser cutting system TruLaser 5030 Fiber (L68) 8000 Watt with LiftMaster X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 8000 Watt Standard equipment: Machine - Enclosed machine frame - Power supply for TruDisk integrated into the machine - Torque drive in combination with linear direct drives - Enclosed beam guidance via laser light cable (LLC) - Machine cooling unit (water-air) - Integrated control cabinets - Integrated cabinet - Automatic pallet changer in longitudinal direction - Longitudinal conveyor - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning TRUMPF laser - Solid-state laser TruDisk 4001 with one LLC outlet - LLC according to standard layout (cable directly next to the machine) - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (laser covered under 6A005). Nlsdpfx Ajzv Trvehksf Cutting head - Universal cutting unit with fully adaptive lens system - Single cutting head strategy - Protective glass against lens contamination - Online condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - SINUMERIK 840D SL control system - Simple workshop programming - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - Microweld - AdjustLine - Multi-sheet processing - Condition Guide - Extended machine sensor system for Condition Guide - 19" touch color screen Data transfer - USB interface - RJ-45 network connection - Central Link - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust extraction system - Machine cladding, certified viewing window, door on the right - Electric roll-up roof + Solid-state laser TruDisk 8001 with 1 LLC outlet - BrightLine fiber - High-speed cutting package - Smart Beam Control (intelligent beam monitoring) - Performance package for fusion cutting + Smart Nozzle Automation - Nozzle changer - Automatic nozzle inspection + High-speed cutting package Eco + Integrated camera 1 for process monitoring (view of the first 2.5m) + CoolLine + Copper cutting package (includes cutting data) + Brass cutting package (includes cutting data) Automation + Basic LiftMaster unit - incl. stainless steel grid (tine spacing 67mm, interchangeable tines), suction frame, stripping device, double sheet detection, symmetrical arrangement) + Loading station - for stack height up to 200mm + Separation of thin sheet metal - Available for sheet thicknesses s = 0.8-2.0mm + Unloading platform + Loading platform + Right-hand arrangement

Condition: good (used), functionality: fully functional, Year of construction: 2016, laser power: 3,000 W, TruLaser Tube 5000 fiber (T06) X Working area max.: 6500 mm Y Working area max.: 200 mm Laser power: 3000 Watts Control system: SINUMERIK 840D SL Standard equipment Machine - Machine table for automatic loading up to 6.5 m - Max. outer diameter of the circle: Round tube up to 152 mm, Rectangular tube up to 170 mm - LoadMaster tube 6.5 m with grouping chamber - Part removal station for 3 m finished part length (incl. scrap conveyor with container) - Part stacking station (with conveyor table and conveyor table extension) - NitroLine - FocusLine - Laser power control - Programmable cutting gas - Automatic start/stop system - Work area lighting Laser - Solid-state laser TruDisk 3001 with one laser output - Maintenance log function - Laser chiller Cutting unit - Lens cutting head with 150 mm focal length - ControlLine Control system - Sinumerik 840DSL - Remote maintenance interface Data transfer - USB interface - RJ45 network interface Safety - CE certification - Light barriers - Compact dust extraction system (1500 Nm*/h) - Protective housing with certified safety panes Service - Network installation via teleservice Additional machine equipment - SeamLine Tube with inner detection - Adaptive clamping technology Nsdpfxszv Tnws Ahkolf - Adaptive clamping feeding station - Adjustable feed chuck - Chip conveyor, longitudinal - Technology package for bevel cutting Automatic LoadMaster Tube 6.5 m - LoadMaster Tube 6.5 m at the rear - LoadMaster Tube 6.5 m tube diameter 15 mm - Unloading station 4.5 m - 1 set of clamping jaws - 1 set of guide rollers - Various support sets for round and rectangular tubes

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting system TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 4000 Watt Standard equipment: Machine - Closed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable Nljdpfxszv Sa Ee Ahksf - Cooling unit - Integrated control cabinets with interior lighting - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Microweld - Automatic nozzle cleaning TRUMPF Laser - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet - Excitation via pump diodes - Laser power control Cutting head - Universal cutting unit - Single-cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - Simple workshop programming - Fast reproduction of parts - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine cladding with certified viewing window door right - Sliding roof + Nozzle changer

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection Nedezv Sarepfx Ahkslf - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: good (used), Year of construction: 2017, functionality: fully functional, X Working range max.: 2000 mm (without repositioning) Y Working range max.: 1250 mm Control: Bosch PNC-P Machine - C-frame - Coordinated guidance - Linear magazine with 15 positions for clamping jaws and tools - Hydraulic clamping jaws (2 pieces) - Drives with maintenance-free three-phase motors - Repositioning device with programmable retaining device - 1st stop pin (right, inside) - Dividing slide Punching head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable retaining device position - Tool length compensation - Spray lubrication for punch - Punch slug extraction - Forming function Control - TRUMPF control based on Rexroth IndraMotion MTX - Operating panel with 15" TFT color screen - Integrated technology data - Teleservice interface via the internet - Automatic shutdown - Program management - Production plan Data transfer - USB interface - RJ45 network connection Nledpezv Safsfx Ahksf Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives Extended standard equipment - Ball tables - Chip container - Initial oil filling - Additional clamping jaw - Foot switch for start - Warping detection - Vibration-damped installation - 5 RTC cassettes with die plates

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, laser power: 6,000 W, CNC laser cutting machine TruLaser 3040 Fiber (L50) 6000 Watt X working area max.: 4000 mm Y working area max.: 2000 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 20 mm Sheet metal thickness copper max.: 8 mm Standard equipment Standard features Machine - Closed machine frame - Integrated cabinet with roller shutter - Torque drive in combination with linear direct drives - Closed beam guidance via laser light cable (LLC) - Cooling unit - Integrated control cabinets with internal lighting - Automatic sheet metal changer in longitudinal direction - 19" touch color screen - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk 3001 with one LLC output - Excitation via pump diodes - Laser power control Cutting head - Universal cutting head - Single cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet metal edge detection Control system - SINUMERIK 840D SL control system - Simple workshop programming - TruTops Laser via network access - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine - FastLine - FlyLine - AdjustLine - Teleservice via Internet Data transfer - USB interface Nledszlpb Sspfx Ahkof - RJ-45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust collection system - Machine enclosure, certified viewing window, door on the right - Sliding roof - Nozzle changer - CoolLine

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, laser type: CO₂ laser, laser power: 5,000 W, CNC Laser Cutting Machine TruLaser 3030 (L20) 5000 Watt X Working area max.: 3000 mm Y Working area max.: 1500 mm Z Working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Sheet metal thickness St. Max.: 25 mm Sheet metal thickness Va. Max.: 20 mm Sheet metal thickness Al. Max.: 12 mm Standard equipment Machine - Enclosed machine frame with integrated laser unit - Motion unit for high-precision machining Nljdpozix Upjfx Ahkef - Torque drive in combination with linear direct drives - Enclosed beam guidance - Single cutting head strategy - Cooling unit - Automatic pallet changer in longitudinal direction - 17" touch color screen - Longitudinal conveyor belt - Ergonomic control panel with touch color screen - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine TRUMPF Laser - CO2 laser TruFlow 3200 with optimized standby mode - Maintenance-free turbo radial fan - High-frequency excitation - Laser control TASC - Laser power control - Laser logbook function Cutting head - Lens cutting head with 250 mm lens - Universal quick-change device (UTI) with bus connection - LensLine with condition monitoring - ControlLine: Height control and sheet metal outer edge detection - Lens with RFID chip Control system - Control system SINUMERIK 840D SL - Simple operation - Simple workshop programming - TruTops Laser via network access - Extended workshop programming - Fast reproduction - Automatic shutdown - ContourLine - FastLine - FlyLine - Microweld - Production plan - AdjustLine - Teleservice via the Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine enclosure with Makrolon panels - TruFlow 5000 with optimized standby - Technology package for lens and nozzle automation (includes nozzle changer, beam alignment, and LensLine with automatic condition monitoring) - CoolLine - Extended pallet entry - Wide transverse conveyor belt with tilting container (container on the left side of the machine) - Optional platform installation (without steel structure)

Condition: used, Year of construction: 2010, controller model: , _____ Description: Year of manuf. : 2010 TruDisk 3302 laser system :- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad :- Output power of 3.3 kW at the workpiece :- Laser system with 1 cavity :- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control :- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data :- Fast laser power control :- TruControl 1000 control system :- Storage capacity for 199 laser programmes :- Safety monitoring in accordance with laser safety class 1, including a central safety lock :- Protection class IP54 :- 10.4" panel computer with TFT touchscreen Extension of the beam path :Plus 1 additional laser light cable output, including interface card :consisting of: :# Optical assembly on base plate with fast switch :# Beam safety switch after coupling, if the output is not connected to an LLK KUKA Roboter KR 30 HA (High Accuracy) inkl. KRC2 :- Six-axis industrial robot mechanics with articulated kinematics :- Three-phase servo drives for 6 degrees of freedom – maintenance-free and protected against overload :- Absolute position measurement :- The K-IRL programming language enables, amongst other things, a flexible programme structure, freely selectable programme/variable names, etc. :- Telediagnostics module DKP 400.1 Rotate-Tilt Positioner :- Rotation and tilting of workpiece clamping devices in relation :to the robot’s position :- Fully interpolated integration of the rotation and tilt axes :as the 7th and 8th NC axes 3D clamping plate 800 x 100 :- Demmeler System :Clamping of fixtures via 3D worktable, hole pitch 16 :mm / grid 50x50 mm 2, SW 800x100 Two-station rotary table :- Manual two-station rotary table, each side of which can accommodate one component clamping fixture :- Light-tight integration into the safety enclosure :- The fixtures are connected via two support rails each Laser Welding Technology Package :- Manual two-station rotary table designed to accommodate one component clamping fixture on each machining side :- The fixtures are connected via two support rails each :with a 16 mm diameter and 100 mm hole pattern : : Standard cabin :- Dimensions (L/W/H) 4800 mm x 7000 mm x 3200 mm Nledpfx Ajzv Dcljhkjf :- Automatic sliding door at the front 2000 mm x 2300 mm :- 1 laser safety screen :- Cab lighting

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D, overall weight: 12,000 kg, total height: 2,400 mm, This TRUMPF Trulaser 5030 Fiber was manufactured in 2011. A robust fiber laser cutting machine, it features a 3000 Watt laser output and a working area of 3000 x 1500 x 115 mm. Capable of cutting up to 20 mm steel, 15 mm stainless steel, and 15 mm aluminum, it operates with a Siemens Sinumerik 840 D control system. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 Fiber machine we have for sale. Contact us for more information. Additional equipment • Closed machine frame with an integrated laser unit • Torque drive combined with direct linear drives • Enclosed beam delivery via fiber optic cable • Water-air chiller for machine cooling • Integrated electrical cabinets with internal lighting Njdpszvv A Defx Ahkelf • Automatic pallet changer (lengthwise installation) • Power supply through TruDisk integrated into the machine • Working area lighting • Wide longitudinal conveyor • Positioning laser diode Machine Benefits Technical Machine Benefits • Positioning accuracy: 0. 05 mm • Laser rated output: 3000 watts Extra Information The LiftMaster is included with the machine. Dimensions Machine Depth 9950 mm

Condition: ready for operation (used), Year of construction: 2013, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, total height: 2,200 mm, This 3-axis TRUMPF TRULASER 3030 FIBER was manufactured in 2013. A robust fiber laser cutting machine with a 3 KW power capacity, it features a large working area of 3000 mm x 1500 mm. It has been well-maintained by TRUMPF, ensuring reliability and precision. A great opportunity to buy this TRUMPF TRULASER 3030 FIBER machine we have for sale. Contact us for further details regarding this fiber laser cutting machine. Machine Benefits Technical Machine Benefits • Trumpf maintenance. Extra Information Machine still under power Dimensions Nlodpfxezvvycj Ahksf Machine Depth 9229 mm

Condition: ready for operation (used), Year of construction: 2013, controller manufacturer: SIEMENS, number of axes: 3, This TRUMPF TruLaser 3030 (L20) was manufactured in 2013. A robust CO2 laser cutting machine, it features a Siemens control system, a laser power of 3200W, and workpiece dimensions of 3000 x 1500 mm. With a travel speed of 140 m/min, it ensures efficient operation. Consider the opportunity to buy this TRUMPF TruLaser 3030 (L20) CO2 laser cutting machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Working hours / laser beam on 49000 h • Longitudinal travel x-axis: 3000 mm • Cross travel y-axis: 1500 mm • Height travel z-axis: 115 mm • Travel speed: 140 m/min • Workpiece dimensions: 3000 x 1500 mm • Laser power: 3200w • Type of laser: truflow Nlsdpszvu Skefx Ahkof Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2007, laser power: 4,000 W, travel distance X-axis: 3,000 mm, overall weight: 11,500 kg, total height: 2,000 mm, product length (max.): 9,800 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 3030 incl. Liftmaster was manufactured in 2007. It features a powerful 4,000 W CO₂ laser with a maximum workpiece weight of 900 kg and a maximum simultaneous speed of 140 m/min. The machine offers an impressive X-axis travel of 3,000 mm and Y-axis travel of 1,500 mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for further details. • Laser Type: CO₂ Laser • Laser Source: TRUMPF TruFlow 4000 • Laser Power: 4,000 W • Laser Wavelength: 10.6 µm • Maximum Workpiece Weight: 900 kg • Maximum Simultaneous Speed: 140 m/min • Positioning Deviation Pa: 0.05 mm • Average Positioning Scatter Band Ps max: 0.03 mm • Maximum Sheet Size: 3,000 × 1,500 mm • Max. Mild Steel Thickness: 20 mm • Max. Stainless Steel Thickness: 12 mm Nledpszvpumefx Ahksf • Max. Aluminium Thickness: 10 mm

Condition: used, Year of construction: 2008, Technical details: tank capacity: - l percentage of cleaning: - µ total power requirement: - kw Number of filters: 5 St. filter: 576/556 x 74 x 1050 mm total pressure: 200 daPa volume capacity: 1500 m³/h filter surface area: 25 m2 Voltage: 460 V motor capacity: 3,3 kW rotary speed of motor: 3600 U/min frequency: 60 Hz dimensions L x W x H: 1,05 x 1,28 x 2,0 m protection class: IP 55 Filter Plates MF Series Filter plates for dust collectors of the MF series are manufactured using the durable and proven Dura-Pleat filter media and can be selected with various media properties. The filter plates stand out due to their low pressure drop, high filtration efficiency, and long service life. · Suitable for high dust loads · Excellent separation efficiency Nedpoyt I Axefx Ahkjlf · Efficient filter cleaning thanks to flow-optimized filter head · High mechanical strength due to robust design · Optimized filter service life Filter material: polyester fleece with Teflon membrane *

Condition: used, Year of construction: 2009, Technical details: Beam Hour: unbekannt / unknown h laser capacity: 4000 W The TLF4000 resonator was installed in a Trumpf True Laser 2525: Laser power: 4,000 W (4 kW) Wavelength: 10.6 µm Beam mode: TEM01* Pulse frequency (gating): 100 Hz – 10 kHz Nledpfjyuvciox Ahkef Gas consumption (laser): CO2: approx. 1 l/h N2: approx. 6 l/h He: approx. 13 l/h Cutting gas O2: approx. 500 – 2,000 l/h Electrical power consumption: approx. 33 – 67 kW Adjustable laser power: programmable in 1% increments Laser type: CO2 laser with closed gas circuit Translated with (free version) *

Condition: used, Year of construction: 1991, Technical details: pressure: 200 t chamfer lenght: 4100 mm control: - distance between columns: 3200 mm stroke max.: 250 mm total power requirement: 22 kW operating pressure: max. 280 bar table width: 200 mm stroke speed - idle stroke upwards: 100 mm/s Njdpfx Ahsy Alw Hskslf stroke speed - idle stroke downwards: 100 mm/s weight of the machine ca.: 18.000 t dimensions of machine: 5,0 x 2,7 x 3,0 m

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2025, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, The laser was fully functional and in very good technical condition until its professional dismantling. The machine was regularly serviced by an authorized service provider, and a complete service history is available. In 2025, all mirrors were completely replaced. The dismantling and professional disconnection of the machine were carried out by an authorized service provider. The machine is currently safely stored in a dry warehouse and is ready for shipment. Videos of the machine in operation are available. Nledpfx Ajv Hxbbjhkjf

Condition: ready for operation (used), Year of construction: 2008, pressing force: 66 t, stroke length: 200 mm, throat depth: 400 mm, total width: 2,650 mm, total height: 2,400 mm, overall weight: 5,800 kg, Equipment: CE marking, Hydraulic press brake Manufacturer: TRUMPF, Type: TruBend 3066 Year of manufacture: 2008 Technical data Nsdpfszu Tawjx Ahkslf Manufacturer: TRUMPF Type: TruBend 3066 Year of manufacture: 2008 Bending length: 2040 mm Press force: 66 t Free daylight between uprights: 2364 mm Throat depth: 400 mm Stroke: 200 mm Y-axis rapid traverse speed: max. 200 mm/s Y-axis working speed: max. 15 mm/s Drive power: 17 kW Dimensions: L 2.65 x W 1.85 x H 2.40 m Weight: 5650 kg Equipment - Electro-hydraulic upper drive - Block hydraulics - Controlled axes: Y1, Y2, X, R, Z1, Z2 - Automatic upper and lower tool clamping - Self-adjusting crowning system - Control system: Delem - Light curtain at the front for laser safety - Foot switch - Tool package consists of: Upper tool, straight, 28°, R1, 2000 mm, segmented Lower tool, V10, 84°, H100, 2000 mm, segmented All information is subject to change without notice.