Used Trimos Measuring Arm for sale (11,216)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, SUPER PRICE!!! NOW ONLY 6,000 EUR!!! Taylor Hobson Talyrond 265 roundness measuring instrument. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing its basic structure, except for the computer. A newer, more modern HP computer with a small form factor is included. Max. diameter: 350 mm Max. test piece height: 500 mm (higher is possible, measured in two sections, up to a maximum of 1000 mm) Self-centering of the workpiece: +/- 5 mm Max. weight of the test piece: 40 kg The system has been used very little and has only had two owners. The original owner, from whom I purchased it, was an implant company in Hamburg. It was used there in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password). It is also on the USB stick, perhaps to be installed on another machine at your location. Accessories are included: the original Taylor Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase individually. A sample/pattern lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a freight forwarder. It is already securely fastened to them. The Talyrond 265 and the desk will be well-protected for transport with bubble wrap, etc., and wrapped with stretch film, and the system itself is secured with "transport safety screws." Shipping will be at the buyer's expense and will be carried out on two Euro pallets. The measuring system should definitely be set up and put into operation by a Taylor Hobson service technician, who can then recalibrate the system on-site. This is now recommended after a few years. Errors can be made during setup and commissioning. For example, some locking screws are installed for transport, and if you forget to remove them, the system can be damaged when it starts up. A truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!! Nledpfx Agszcqy Es Ieh

Condition: used, Year of construction: 2004, Mitutoyo CRYSTA-Apex C7106 – used CNC coordinate measuring machine with a gantry design, professionally inspected and fully functional. The proven C-series from Mitutoyo stands for measurement stability on a granite base – ideal for precise 3D measuring tasks in the metrology lab. Technical data: - Measuring range: 700 x 1000 x 600 mm - Control system: UC-200H - Software: MCOSMOS-1 V4 - Probe system: Renishaw PH10M Equipment & accessories: - Renishaw PH10M rotary/tilting head - Renishaw TP200 probe system - Renishaw HCU1 hand control unit - Mitutoyo calibration certificate 08/2026 (WK-2060334-26) Included in the scope of supply: - Coordinate measuring machine CRYSTA-Apex C7106 - Renishaw PH10M rotary/tilting head - Renishaw TP200 probe system - Renishaw HCU1 hand control unit - Computer system with MCOSMOS-1 V4 - Mitutoyo calibration certificate 08/2026 Nledjz Tffnjpfx Ag Ioh Not included in the scope of supply: - Automatic probe changer / probe changing rack Condition: used, inspected – fully functional. Year of manufacture: 2004. Procedure: Inspection by appointment. Disassembly and loading will be carried out by us, transport on request. Location: Leonberg, Germany. Kneissl Messtechnik GmbH – your specialist for coordinate measuring technology with an accredited DAkkS calibration service. Installation, training, and instruction are optional.

Condition: used, Year of construction: 1978, machine/vehicle number: 27309654, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine Type: 3D Coordinate Measuring Machine Machine Weight: approx. 2 t Travel Ranges X-axis travel: 1,600 mm Y-axis travel: 1,000 mm Z-axis travel: 1,300 mm Working Areas Working area Y-axis: 175–1,210 mm Working area Z-axis: 0–810 mm Baseplate Size of baseplate: 1,500 × 800 × 120 mm Digital Display Digital display: Grundig 3-axis Digimess Dimensions of digital display: 235 × 80 × 130 mm Performance Data Total power consumption: 0.04 kW Dimensions Space requirement: approx. 2.0 × 1.5 × 1.63 m EQUIPMENT Finely scraped cast plate with 4 adjustable feet, 2,000 × 1,500 mm Approx. 20 different probing and measuring styli Stiefelmayer guide system “A” Nodpo Aa Np Nefx Ag Islh

Condition: good (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 88229, total width: 1,450 mm, total length: 2,100 mm, overall weight: 3,800 kg, table width: 1,000 mm, table height: 850 mm, table length: 2,100 mm, Equipment: type plate available, Coordinate measuring machine: Zeiss MC 850, 08/12/06, UHING Nlodpfx Agsz T T T To Ieh Year of manufacture: 08/1990 Serial number: 88229 Control system: C99 Dongle available: Yes Software: Calypso 7.6.4 Measuring head: VAST XT – Good condition – PC included – New software + license – Everything packed for transport with original Zeiss transport securing devices (value of transport securing devices approx. €5500) X-axis as a longitudinally movable portal, 850 mm Y-axis cross slide in the portal, 1,200 mm Z-axis as a measuring head quill (vertical), approx. 600 mm Through-passage between the portal, approx. 1,000/1080 mm Through-passage in height, approx. 750 mm Overall table size, approx. 1,000 x 2,100 mm Table height above the floor, approx. 850 mm Machine height, approx. 3,050 mm Weight, approx. 3,800 kg The machine was in use until recently. Free loading.

Condition: ready for operation (used), Year of construction: 2004, Manufacturer: CE Johansson / Hexagon Metrology Model: Saphir 12.5-30-10 Machine Type: 9489-145 Serial Number: 8489-70305 Measuring Capacity Nodpfx Ajzrvg Uog Islh X-axis: 1,250 mm Y-axis: 3,000 mm Z-axis: 1,000 mm Machine Dimensions Overall Width (B): 2,400 mm Internal Width (B₁): 1,450 mm Overall Length (D): 4,860 mm Overall Height (H): 3,790 mm Table Height (H₁): 700 mm Clearance Height (Hₚ): 1,150 mm Weight & Load Capacity Machine Weight: 8,200 kg Maximum Permissible Workpiece Weight: 6,000 kg Clamping Area: 1,450 × 3,400 mm Measuring Performance Resolution: 0.1 µm Accuracy (VDI/VDE 2617 Part 2.1): U₃ = 4 + 5L µm (L in meters) Speed & Acceleration Maximum CNC Speed: 500 mm/s Acceleration: 1,000 mm/s² Electrical Requirements Power Supply: 230 V ±10%, Single Phase, 50 Hz Power Consumption: 1,500 VA (10 A) Air Supply Operating Pressure: 6–10 kp/cm² (0.6–1.0 MPa) Air Consumption: 48 L/min at 5.5 kp/cm² (240 NL/min) Operating Environment Required Temperature Stability: ±1.0 °C Maximum Temperature Gradient: 0.5 °C Software PC-DMIS Version: CAD++ 2018 R2 (Release) Build: 535 (Pre-Release) Major Release Date: October 30, 2019

Condition: used, Year of construction: 2010, functionality: limited functionality, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, total height: 1,680 mm, type of input current: AC, total width: 740 mm, input voltage: 230 V, table length: 750 mm, Equipment: type plate available, Machines works fluently apart from sprocket- which blokes and reqiures fixing. Nlsdoz Ditvspfx Ag Ieh

Condition: good (used), Year of construction: 2020, machine/vehicle number: 233949-1, Offer 26377 Measuring and control table made of natural hard stone with cabinet base Technical data: - Measuring and control table according to DIN 876 / 00 - Length approx. 1200 mm - Width approx. 800 mm Nlsdpfx Agj Ad Hh Ds Ioh - Plate thickness approx. 160 mm - Table height, adjustable, with cabinet base approx. 910 mm - Cabinet base with 1 door + 4 drawers - Drawer width 550 mm - Weight approx. 500 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 250 mm, workpiece weight (max.): 40 kg, total height: 1,778 mm, total width: 1,027 mm, total length: 1,407 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 250 mm, overall weight: 579 kg, year of last overhaul: 2024, Equipment: documentation/manual, lighting, type plate available, Mitutoyo QVT1-X404P1L-D 3D CNC Multisensor Measuring Machine Enhanced application possibilities through the combination of tactile and non-contact measurement. Powerful CNC-controlled system for intelligent, simple, and fully automatic measurements. Multiple image processing filter functions ensure reliable results. Flexible switching of probe tip configurations with the MCR20 probe head changer. White LED transmitted light. White LED coaxial light. Programmable 4-quadrant LED ring light. Triangular pattern focusing for low-contrast surfaces. Nodpfx As Afdr Aeg Iolh Programmable magnification changer with 1x, 2x, and 6x magnification. High-resolution CCD black and white camera. Resolution: 0.0001 mm "One-Click Tool" technology for optimal edge detection.

Condition: good (used), CMC Ariemat ARM 75 Automatic Cardboard Creasing Machine The machine is fully operational and ready for production. Like new. This highly efficient creasing system is ideal for the production of binders, hard covers, and more. Made in Italy. Nedpfxezw Typs Ag Islh Sheet feeding is manual, while the machine handles the rest automatically. An automatic feeder can also be added (optional). Parameters are set from the control panel and jobs can be saved to the machine’s memory. Materials processed range from 200 GSM to 4 mm cardboard. Sturdy construction, weighs 750 kg. Adjustable creasing and counter-creasing widths. Stepper motor control. Fast operation, up to 2400 sheets/hour. Sheet size: 750 x 1400 mm. Two sheet guides with an extended table and pressure rollers. Quick machine format conversion in less than 1 minute. Receiving table included.

Condition: ready for operation (used), Year of construction: 1990, Immediately available from prototype construction: Coordinate measuring machine from Zett Mess Platen and 2 measuring beams, manufactured in 1990 Electronics and measuring system newly installed in 2020 Platen dimensions: 6,000 x 3,100 mm Measuring range: X/Y/Z 6 / 3,100 / 2,500 mm Nljdpfx Ago Aa Ikfo Ish Service available from the successor company, Zett Mess Includes all accessories Price: EUR 9,500.00 plus VAT, ex works

Condition: ready for operation (used), Year of construction: 1990, Immediately available from prototype construction: Coordinate measuring machine, Zett Mess Plates and 4 measuring beams, manufactured in 1990 Electronics and measuring system newly installed in 2020 Plate dimensions: 12,000 x 3,100 mm Nlsde Aa Ii Ujpfx Ag Ieh Measuring range X/Y/Z: 12,000 / 3,100 / 2,500 mm Service from the successor company, Zett Mess, is available All accessories included Price: EUR 23,000.00 plus VAT, ex works

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 09120035, total width: 970 mm, total length: 930 mm, total height: 1,620 mm, overall weight: 445 kg, Equipment: documentation/manual, type plate available, Dear Sir or Madam, We are selling our Tesa Micro-Hite 3D measuring machine. The measuring machine is in very good condition and has been well maintained. In addition, there are a number of accessories included. You can see these in the images below. If you have any questions, please do not hesitate to contact us. Nedpfjzy H U Ssx Ag Ijlh

Condition: good (used), Year of construction: 2024, Theodolite DT-405, Video Measurement System VM-18, Angle Measurement Unit, Camera System used, from business liquidation Original purchase: 2024 Information and data according to the manufacturer: with active target panel Range up to 130m Video display of H and V angles versatile applications lockable H and V axes carrying handle collimating telescope zoom camera LED target panel Nljdpfxs Ab R Upe Ag Ieh motorized focusing unit Note: Operation only possible via monitor MF-03 Charging cable for Geo-222X target panels available Operating manual Transport case without carrying strap without adjustment tool without rain cover We recommend an inspection Information without guarantee Information, details, and technical data from the manufacturer To avoid any misunderstandings regarding the condition of the item and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are Monday to Friday from 8:30 a.m. to 12:00 p.m. and 1:00 p.m. to 4:30 p.m. During this time, inspections and collections are possible and desired after prior appointment. Subject to prior sale, changes, errors and misprints.

Year of construction: 2022, condition: used, controller manufacturer: Sonstige, controller model: Bruker alicona MetMaX, _____ Description: Year of manuf. : 2022 Control : Sonstige Bruker alicona MetMaX Movement X/Y/Z : mm In General: Measurement method:Non-contact, optical, three-dimensional Maximum number of measurement points:500 million Nljdpfo Aau Tysx Ag Ish Measurement volume:310 x 310 x 310 mm Travel speed:100 mm/s Dimensions:960 x 1,109 x 1,958 (2,288) mm Weight:approx. 1,250 kg Measuring object Surface texture:Any surface (including polished metals) Max. weight:30 kg Max. dimensions (W x H):680 x 375 mm Equipment: Rotary table:A-axis, C-axis Lens changer:Automatic (4-position) Number of lenses:4 (WD 11, 17, 19, 30) Polarisation:Ringlight HP Vc1 System monitoring:9 temperature sensors ControlServerSF:64-bit, 6-core, 32 GB RAM, 500 GB SSD, Windows 10 Set-up mode:Handheld control unit

Condition: used, This listing is for the Partical Measuring Systems LASAIR lll 310c particle measuring systems The unit is in full working condition and is ready for immediate release The Lasair® III 310C is a state-of-the-art portable aerosol particle counter designed to meet the stringent requirements of highly regulated environments. Manufactured by Particle Measuring Systems (PMS), it sets the standard for portable particle counters, ensuring that your environment remains clean and compliant.​ Key Features Particle Size Range: 0.3 to 25.0 µm Flow Rate: 1.0 CFM (28.3 LPM) ±5% Counting Efficiency: Complies with ISO 21501-4 requirements Display: 8.4" color VGA IR touch screen (IP65 rated) Data Storage: Up to 3,000 complete data sets Connectivity: Ethernet, Modbus TCP/IP, RS-232, USB data downloading; optional wireless Ethernet Environmental Inputs: Four 4-20 mA inputs for external sensors Power Options: Operates on AC power or hot-swappable batteries Nlodpfxjxv A T Ns Ag Ieh Compliance: Meets ISO 14644-1, EU GMP Annex 1, and ISO 21501-4 standards Software Compatibility: Supports FacilityNet, PharmaceuticalNet, and FacilityPro for data analysis and reporting Reporting Capabilities: Cleanroom certification results are available through a local printout, downloadable via USB in a secure format, or through the use of external software packages Wireless Communication: Wireless network communications are facilitated with an externally mounted wireless adapter, simplifying communications with network systems ​ Specifications Dimensions: 30.1 x 32.7 x 25.9 cm Weight: 6 kg (without battery), 7.5 kg (with two optional batteries) Operating Environment: Temperature: 0 – 30°C; Humidity: 5 – 95% RH non-condensing Sample Tubing: Supports 3/8", 1/2", and 3/4" tubing up to 8 meters in length Sample Output Filtering: Internally filtered to >99.97% at 0.3 µm

Condition: good (used), Motor power: 1.5 kW Connection: 220 volts Speed: 2800 rpm Cutting length: max. 370 mm at 90° Cutting depth: max. 95 mm Saw blade diameter: max. 300 mm Nodpfx Age Aftw Io Islh

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, type of input current: AC, input voltage: 230 V, overall weight: 723 kg, travel distance X-axis: 235 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 600 mm, input frequency: 50 Hz, workpiece length (max.): 600 mm, ZOLLER genius 3 threadCheck – CNC measuring and setting device for threading and cutting tools, year of manufacture 2016 The machine is in technically perfect condition and fully functional. THE STRENGTHS – WHAT DISTINGUISHES THE threadCheck FROM THE genius - One machine for all measuring tasks: The threadCheck can do everything the genius can, and with the appropriate adapter holders, it can also perform setting and measuring tasks like a venturion or smartCheck – instead of two or three devices, one is sufficient. - The threading specialist: The 6th CNC axis and the pivoting optics carrier (± 30°) align the optics with the helix angle. Thread drills, milling cutters, and thread forming tools are measured without distortion, contact-free, and with µm precision – the genius cannot do this. - Threading programs without programming: Flank diameter, pitch, flank angle, lead angle, back taper, taper; metric, UNC/UNF, Whitworth, trapezoidal, and round threads. - Grinding wheels and grinding wheel packs are detected and automatically measured via type selection (MP 410). - Fully automatic, operator-independent measurement with test protocol – reproducible, documented, and ensuring reliable handling of complaints. - Spindle ace: Run-out ≤ 0.002 mm, changeover accuracy 0.001 mm (according to the manufacturer). - Full enclosure protects against dirt and stray light – can be used directly in production instead of in the measuring room. TECHNICAL DATA - 6 CNC axes · Tool length Z max. 600 mm · Tool diameter D max. 310 mm · Y-axis ± 50 mm - Connection 1 kVA, 230 V, 50 Hz · Compressed air 6 bar ± 10 % · Weight approx. 723 kg · gray EQUIPMENT - Software update 2023 to Windows 10 with pilot 4.0 V1.19 - Optics carrier genius 4 1:1/HR70, through-light camera 1:1/HR70, top-light camera HR70 with LED lighting, CNC pivoting device - HG spindle ace size I/AF/HLG with autofocus, hollow encoder for high-resolution C-axis - Operating unit cockpit-pilot with 23" touch display, keyboard, mouse · Control cabinet ventilation - Software threadCheck with photorealistic input dialog and protocol on monitor and printer - Measuring program package inspectionPremium (target/actual comparison, item statistics, cost analysis, TMS “Silver”) - MP 212 flank diameter · MP 370 thread former · MP 851 first full tooth · MP 410 grinding wheels/packs · Macro editor lasso - Collet set Ø 4–16 mm (10 pieces) · Extraction tool · Color laser printer SERVICE AROUND THE MACHINE On request, complete technical support from a single source – according to individual agreement: Software upgrade · Installation and commissioning · Operator training · Support during operation · Demonstration · Warranty according to agreement. PROCESSING Nodpfx Agj Advh Ho Islh Machine in transit, delivery from 16727 Velten near Berlin · FCA Velten including loading · 100% advance payment · Delivery date by arrangement · Inspection by appointment. Data sheet attached as a PDF. Technical data according to manufacturer’s documents and information from the previous owner (information provided, no agreement on characteristics within the meaning of §§ 434, 443 BGB). We will confirm individual values bindingly during the inspection. Errors and prior sale are reserved.

Condition: used, functionality: fully functional, For sale is a high-quality linear measuring system consisting of a Heidenhain MT101M measuring probe and an ND221 display unit. Ideal for precise measurements in mechanical engineering, manufacturing, or testing. Nljde Afbubopfx Ag Ish Highlights: * High-precision measuring probe MT101M * Digital display unit ND221 – easy to read * Robust industrial quality from Heidenhain * Perfect for length and comparative measurements * Ready for immediate use Condition: Used, but in very good condition. Fully functional. Normal signs of wear and tear (see pictures). Scope of delivery: * Heidenhain MT101M measuring probe * ND221 display unit * Connecting cable * Measuring table (choice between a large and a small measuring table)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, type plate available, Shimadzu AGS-X 10 kN universal testing machine with TRViewX 800D video extensometer Price: €18,500 excluding VAT, negotiable Used Shimadzu AGS-X tabletop universal testing machine, originally ordered from Shimadzu in 2022 by Roffelsen Plastics Slovakia. Extensively equipped for tensile and three-point bending testing, with two load cells, pneumatic specimen grips, Trapezium-X software, and a TRViewX 800D non-contact video extensometer for measuring specimen elongation. Nljdpjz Rt Irofx Ag Ieh Suitable for materials testing and quality control involving plastics, elastomers, tapes, cords, and other compatible specimens. Included equipment: • Shimadzu AGS-X testing frame, maximum capacity 10 kN. • 10 kN and 2 kN load cells, specified as accuracy class 1. • TRViewX 800D video extensometer. • Control PC with 24-inch monitor and Trapezium-X Single software. • Pneumatic quick-change grips, rated to 10 kN, with pyramid-pattern and diamond-coated inserts. • Pneumatic wrap grips, rated to 10 kN, for specimens measuring 0–9 mm. • Three-point bending fixture specified for EN ISO 178, R5, with digital displacement measurement and accessories. • Grip-control foot pedals, pneumatic tubing, mounting adapters, and alignment fixture. • Dedicated machine table. • Mitutoyo micrometer and caliper with data-transfer cables; micrometer stand. Technical specifications: • Crosshead speed: 0.001–1,000 mm/min. • Maximum return speed: 1,500 mm/min. • Test-space width: 425 mm. • Maximum crosshead-to-table clearance: 1,200 mm without grips. • Machine dimensions: approximately 653 × 520 × 1,603 mm, excluding table. • Machine weight: approximately 85 kg, excluding table and accessories. • Electrical supply: single-phase 200–230 V, 50/60 Hz. • Compressed air required for pneumatic grips. Latest calibration: The machine is regularly calibrated. Location: Ivanka pri Nitre, Slovakia. Price excludes transport and installation. Collection and shipping arrangements to be agreed with the buyer.

Condition: used, Purchase your coordinate measuring machine from the specialist in coordinate measuring technology with 30 years of experience – Kneissl-Messtechnik. General machine data: Machine type: Crysta-Apex C 7106 Manufacturer: Mitutoyo Measuring range: 700 x 1000 x 600 mm Probing system: Renishaw PH10MQ (rotary/swivel head) Probe head: Renishaw TP200 Software: MCOSMOS-1 V4 Included in delivery: - Coordinate measuring machine Mitutoyo CRYSTA-Apex C7106 - Renishaw PH10MQ rotary/swivel head - Renishaw TP200 probing system Not included in delivery: Nledpfxs Aa Nc No Ag Ioh - Automatic probe changer / probe changing rack Condition: Used machine. Further technical details (year of manufacture, control system) available upon request. Processing: Inspection possible by arrangement. Dismantling and loading carried out by us, transport upon request. Kneissl Messtechnik GmbH – Your specialist in coordinate measuring technology with an accredited DAkkS calibration service. Installation, instruction, and training available as options. We offer worldwide delivery on request!

Condition: used, Carl Zeiss Jena ULM 01-600C Universal Length Measuring Machine Manufacturer: Carl Zeiss Jena Model: ULM 01-600C Serial No.: 7104 Digital Readout: AE101 Nsdpfx Ae Ady Ikjg Islh Description Carl Zeiss Jena ULM 01-600C universal length measuring machine with AE101 digital readout and a comprehensive set of original accessories. The machine comes from a former metrology environment and includes multiple fixtures, measuring attachments, tables, centers, and original storage boxes as shown in the photographs. The machine has been stored for a number of years and has not been tested recently. It is therefore offered in its current condition. Included Carl Zeiss Jena ULM 01-600C measuring machine AE101 electronic display unit Original measuring fixtures and accessories Various probes, supports, tables, and mounting equipment Original wooden storage cases Everything shown in the photos Stored unused for several years Not recently tested Sold as-is Calibration status unknown

Condition: used, Year of construction: 2019, Manufacturer: FARO, Type: Quantum 21000, Year of manufacture: 2019, Serial number: W25-M5-19-19502, 7 axes, Reach 2,500 mm, Single Point 0.0270 mm, 38µm, PC evaluation unit, including measuring table (custom-built), mobile, dimensions approx. 1,000 x 1,000 mm, equipment case made of plastic. Nljdpfx Asz Tiyijg Ioh +++ ATTENTION: This item is part of an online auction! +++

Condition: new, Year of construction: 2020, Cantilever racking – NEW Data: - H: approx. 416 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Center distance: 131 cm - NEW – immediately available from stock. - 750 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized finish. - Cantilever arms in hot-dip galvanized finish. - Arms are bolted on. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Racking consists of: - 04 x uprights, incl. base approx. 416 cm, made of IPE160. - 12 x cantilever arms approx. 120 cm, made of IPE 100 - incl. all necessary connecting elements and screws. Why BLT cantilever racking? - Certified German manufacturer, DIN EN 1090 – Made in Germany - All specified load capacities of the racking uprights and cantilever arms are statically verifiable at 100% load. - All racking systems are delivered in a hot-dip galvanized finish. This means they can be installed both indoors and outdoors and will not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets according to DIN EN 15048-1. - Long reorder guarantee - Upright base and upright back are welded together, providing additional safety and shorter assembly times, as the feet do not need to be screwed to the upright back. - Connections made of angle steel, eliminating the need for adjustment with tensioning bolts. This shortens assembly time. - No elongated hole system, thus no weakening of the upright profile. Nodpo Afgh Tefx Ag Ijlh Price: €2,653.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as floor anchors, impact protection, etc., can also be purchased from us. Our recommendation: Let us know your requirements… We will be happy to assist you in realizing your projects, from planning to ordering to assembly. Delivery can be arranged by us at a favorable price upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total width: 810 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 560 kg, approx. 3.15 running meters. Cantilever shelf H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : Nljdpfx Ao Afg I Tog Ioh - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - incl. all necessary connecting elements and screws. -- Available immediately Price : 1525,00 € net 1814,75 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, Year of construction: 2006, Measuring range: 500x400x400 mm, max. workpiece weight: 180 kg, with measuring probe, manufacturer: RENISHAW, type: MH20I, various ruby replacement measuring probes in a case, and evaluation hardware. Nsdpsz Nht Hsfx Ag Ijlh