Used Tecna Spot Welding for sale (6,580)

Condition: used, current capacity 8,0 kVA throat 80 - 480 mm contact pressure capacity 17 - 235 daN horn spacing 140 mm mm rated capacity 8,0 kVA voltage 380 V total power requirement 17,8 kVA weight of the machine ca. 77,5 kg dimensions of the machine ca. 0,35 x 0,80 x 1,05 m - Serial-No.: 18310126 - 2 Ppsdpfjy Ty Dcox Amysw

Condition: used, Spot and projection welding machine NIMAK type BMP 20/150 Spot welding machine, projection welding machine Mach. No. 81692 year of manufacture approx. 1980 Power at 50% duty cycle 150 kVA Clamping plate below 200 x 160 mm Clamping plate above 200 x 160 mm Power setting continuously variable Max. projection 150 mm Electrode force 200 - 2000 kp continuously variable Operating air pressure max. 6 bar Ppodpjv Dxm Sofx Amyjw Connection power 600 kVA Mains connection 380 volts, 50 Hz - Welding control DTW 4Z 2P - Single spots and series spots - Parallel electrode guidance - Water-cooled without cooling unit - Electric 2-hand control panel with emergency stop - Control cabinet with control permanently attached to the machine Space requirement L x W x H 1000 x 800 x 1800 mm Weight 900 kg good condition

Condition: used, AC spot welding machine, projection welding machine ARO Type MA 350 DC AC resistance welding machine Machine No. MA35031332 / 9731122B110 / Year of manufacture 1997 Power at 50% duty cycle 30 kVA Power at 100% duty cycle 21 kVA Maximum welding power 156 kVA Reach 550 mm Electrode arm diameter 60 mm Electrode holder diameter 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Mains connection 400 Volt, 50 Hz Connected power 75 kVA / 63 Amps / Conductor cross-section 3x 16 mm² Possible sheet metal combination max. 5 mm + 5 mm - Welding control ARO Micro 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuously adjustable welding current via thyristor module - Parallel electrode guidance - Double-stroke welding cylinder (pre-stroke / welding stroke) - Operating mode: single stroke and series of spots - Electrode force continuously adjustable via air pressure - Water-cooled via external water cooling (water chiller not included) - Electric foot switch - Control cabinet with control unit permanently mounted on the machine - PC interface RS 485 - Welding point counter - Operating manual for control unit, spot welding machine and electrical diagram available Space requirement W x H x D 520 x 1550 x 1150 mm Weight 290 kg Very good condition Pedpfxehpf Iys Amyjpw

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Ppedpfx Asycv Saomyow Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Condition: refurbished (used), Year of construction: 2025, Power at 50%: 80kVA Short circuit-current: 45,4kA Electrode force: 100-600daN / single stroke Throat depth: 350mm --- Weld control: MPS 100mono (8-times, 1-program) --- Podpfx Amewqmrnsyjpw Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: refurbished (used), Year of construction: 2025, Power at 50%: 63kVA Short circuit-current: 26,3kA Electrode force: 65-390daN / single stroke Throat depth: 450-750mm --- Weld control: MPS 15036 (5-times, 1-program) --- Ppjdov T Unwopfx Amyew Extra Equipment: - doppel foot pedal "currentless contact --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: used, Spot Welding Machine DALEX Type SL 16 - 2 Machine No. ZZH/N-10183 Year of manufacture: approx. 2002 Rated power at 50% duty cycle: 16 KVA Maximum welding power: 50 KVA Max. throat depth: 500 mm Max. electrode force: 17 - 278 daN Electrode arm Ø 45 mm Electrode holder Ø 25 mm Arm spacing: 150 mm / 300 mm Operating pressure: 1–6 bar Open circuit voltage: up to 3.6 Volt Connected load: 37 kVA Mains connection: 400 Volt, 50 Hz - Weld control MPS 200-003 Pjdpfx Ajy N Duksmyspw - Welding cycle triggered via electric foot switch - Water-cooled Required space (L x W x H): 1100 x 720 x 1450 mm Weight: 230 kg Very good condition

Condition: good (used), 2 used water-cooled spot welding machines Technical data: Max. welding output: 23.7 kVA Rated output at 50% duty cycle: 8 kVA Short-circuit current: 8.8 kA Open-circuit voltage in 4 steps: from 2 – 3.2 V Ppodpfx Amjy Naq Isyjw Electrode force: 17 – 235 daN Cooling water flow rate: 4 l/min Weight: 85 kg per machine Price: 550,-- EUR net per machine Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Spot welding tongs Dalex Type 3011/2 Pedpoy Inwgjfx Amyspw Throat depth 250 mm Rated power 2.4 KVA 380 Volt

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors Ppjdpfoxrb Tgex Amyjw - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: PS1/9173/9169/2, type of input current: three-phase, input voltage: 400 V, overall weight: 775 kg, electrical fuse: 105 A, compressed air connection: 5 bar, This Schlatter PS 130 is a robust, industrial spot welding machine renowned for its reliability in metal welding applications. Ppodpjy Snycsfx Amyow

Condition: used, Dalex-Werke Podpfx Amsg Rcpxsyspw Pms 10-2 380V 50Hz Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 45 kA Rated primary voltage 380 V - 50 Hz Open-circuit voltage of 5.6 V Electrode force: 65-390 daN Machine weight: 341 kg

Year of construction: 1970, condition: used, Spot welding machine Manufacturer: Dalex Ppsdpfxok Tt Hfj Amyjw Type: SF 16 Continuous power output: 16 kVA at 50% duty cycle.

Condition: used, continuous power (apparent): 50 kVA, short-circuit current: 31 A, input voltage: 380 V, overall weight: 420 kg, welding power (max.): 126 kVA, Dear Sir or Madam, Below we offer you a DALEX spot welding machine "PMS 10-4", used and in very good condition. Pjdpfx Aewtr Exemyjpw Technical data and dimensions: errors excepted. Prices are quoted: plus VAT ex stock, loaded free truck. Delivery time: immediately available from stock, subject to prior sale. Payment: advance payment. For further details, see PDF.

Condition: refurbished (used), Year of construction: 2026, Power at 50%: 16kVA Short circuit-current: 20,7kA Psdpfx Ajy Ez I Hsmyepw Electrode force: 65-390daN / single stroke Throat depth: 200mm --- Weld control: MPS 10 (5-times, 8-program) --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: refurbished (used), Power rating at 50%: 25kVA Short-circuit current: 22,5kA Electrode force: 600daN weight: 51,5kg --- with Electrode arm 170mm Podpfsy Ez Igex Amyjpw optional till 800mm --- welding control MPS15036 --- warranty: 6 months

Condition: used, Year of construction: 1975, machine/vehicle number: 12138/4, nominal capacity: 20 kVA throat: 250 - 600 mm Ppsdpob Nvimsfx Amyew spark plug air gap: 270 mm welding capacity steel: ca. 2,5 + 2,5, max. 3,5 - 1,5 mm electrical connection: 380 V kW space needed: 470 x 1170 x 1300 mm weight: 210 kg

Year of construction: 1990, condition: used, machine/vehicle number: 9072492, nominal capacity: 100 kVA throat: 500 mm spark plug air gap: 330 - 500 mm electrical connection: 400 V kW space needed: 700 x 1420 x 2000 mm weight: 750 kg Pjdpfx Amoz H Dysyepw

Condition: used, machine/vehicle number: 4229, nominal capacity: 12,5 kVA throat: 350 - 500 mm spark plug air gap: 120 mm welding capacity steel: 8 mm electrical connection: 380 V kW space needed: 400 x 1000 x 1150 mm weight: ca. 190 kg Psdpfx Ajbh Nxremyepw

Condition: used, machine/vehicle number: 7052446 E 80686, Outreach: 250 mm Welds steel sheet, approx.: 2.5 + 2.5 mm Wire: 12 + 12 mm Ø Control in 6 steps Welding time can be adjusted continuously Ppjdpfobnygqjx Amyjw Manually operated

Condition: excellent (used), throat depth: 415 mm, water-cooled, compressed air-operated spot welding machine Make DALEX type A 3139-S2 Rated power at 50 % duty cycle: 8 kVA Sec. short-circuit current: 8 kA sec. open circuit voltage: 2.9 V Electrode force: 300 daN with cardan suspension and suspension bracket Ppodotdnqzjpfx Amyjw 10 m connection cable Synchronous welding control RS 15 1 pair of electrode arms 415 mm projection top 245/55-1 K and bottom V 20//415 S

Condition: good (used), Year of construction: 1995, Rated power: 63 kVA Thrust: 520 mm Electrode arm distance: 200 mm Ppodpfxjwurw Rj Amyjw Welding capacity for steel: approx. 7 + 7 mm Welding capacity for non-ferrous metals: approx. 2 + 2 mm Electrical connection: 380 V kW

Condition: used, Plug-in welding control in a 19" housing Type NPS 8043-1 IQ1 with quality assurance and 50 programs Solenoid valve voltage: 24 V DC Ppjdpjdga Nbsfx Amyjw complete with current measuring belt MB 260 OTHER CONTROL MODULES IN STOCK: e.g.: 8036 - 8036-S3 8033 8043 MPS 200 R1 RATIA 43a HWS 2202 Profil IQ

Condition: excellent (used), Parallel-guided, water-cooled spot welding machine Brand DALEX Type PL 40 Rated power at 50% duty cycle: 40 kVA Secondary short-circuit current: 21.5 kA Secondary open-circuit voltage: 5.5 V Single-stroke cylinder - electrode stroke 65 mm Ppjdpfxswd I Ano Amysw Electrode force: 65-390 daN Arm reach: 450-750 mm adjustable Arm spacing: 150 or 310 mm Equipped with an add-on control cabinet in accordance with VDE 0110 Main switch Synchronous welding control system MPS 1036 Straight tubular arm with 750 mm reach Photos show loading condition (electrode arms were removed due to pallet dimensions)

Condition: used, Spot welding machine, projection welding machine, NIMAK Type PMP 5 / 35 Manufacturer's number: 88100, Year of manufacture: approx. 1988 Pjdpshubgzefx Amyepw Power at 50% duty cycle: 35 kVA Reach: 250 - 450 mm Working stroke: 40 mm Electrode force: 100 - 460 kp, steplessly adjustable Electrode force at 6 bar: 460 daN Operating air pressure: 2 to 6 bar Electrode arm: Ø 60 mm Electrode holder: Ø 30 mm Insert electrodes, cone: MK 2, Ø 17.78 mm Arm distance: 200 / 400 mm Adjustability of the electrode holder: 200 mm Connected load: 83 kVA Mains connection: 380 Volt, 50 Hz - 4-cycle control - Stepless power adjustment - Single-point and multi-point welding - Parallel electrode guidance - Water-cooled (without cooling unit) - Electric foot switch Space requirement L x W x H: 1200 x 650 x 1500 mm Weight: 300 kg Good condition