Used Support Carriage for sale (15,335)

Condition: used, machine/vehicle number: H2X386V04476, Year of construction: 2019, operating hours: 24,655 h, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork length: 1,200 mm Fork spreader: 350–1,000 mm MACHINE DETAILS Mast: Triplex mast with full free lift Drive type: Electric Battery: 48 V, 625 Ah Battery voltage at rest: 50.8 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Service valid until: UVV 07/2027 UVV inspection valid until: UVV 07/2027 Operating hours: 24,655 h EQUIPMENT Former Linde full-service unit Facelift model Tilt angle indicator Side fall protection White, non-marking tires LED work light, front LED work light, rear Road traffic lighting with turn signals Safety Light, front Safety Light, rear Comfort seat with lumbar support and seat heating Lredpfx Abjz Nv Ewe Aou Hydraulics: 3rd and 4th valve Side shifter All dimensions are rounded values. No guarantee is given for typographical and measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 131

Condition: used, machine/vehicle number: H2X386V04452, Year of construction: 2019, operating hours: 21,068 h, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork length: 1,200 mm MACHINE DETAILS Mast: Triplex mast Lift type: Full free lift Lrjdpfxoz Nxfms Ab Aou Battery voltage: 48 V Battery capacity: 625 Ah Battery type: 5 PzS Battery year of manufacture: 2023 Battery voltage at rest: 50.4 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Service valid until: 07/2027 UVV (Occupational Safety) certificate valid until: 07/2027 Operating hours: 21,068 h EQUIPMENT Former Linde full-service unit Fork positioner with side shifter Display of tilting angle Lateral fall-through guard Non-marking white tires LED work light front LED work light rear Road traffic lighting with turn signals Safety Light front Safety Light rear Comfort seat with lumbar support Seat heating Hydraulics: 3rd and 4th valve All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by e-mail. Collection without prior notification from Monday to Friday between 07:00 and 16:00. In the event of non-timely collection, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 174

Condition: used, machine/vehicle number: H2X386V04463, Year of construction: 2019, operating hours: 23,617 h, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork length: 1,200 mm Fork adjustment range: 350–1,000 mm MACHINE DETAILS Mast: Triplex mast with full free lift Battery voltage: 48 V Battery capacity: 625 Ah Battery type: 5 PzS Battery voltage at rest: 51.0 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Dead weight: 3,800 kg Service valid until: 07/2027 UVV (occupational safety) valid until: 07/2027 Operating hours: 23,617 h EQUIPMENT Former Linde full-service unit Fork positioner with side shifter Tilt angle display Lateral fall-through guard White, non-marking tires LED work light, front LED work light, rear Road traffic lighting with turn signals Safety Light, front Safety Light, rear Comfort seat with lumbar support Seat heating Hydraulics: 3rd + 4th valve All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Lredpjz Nvqaefx Ab Aju Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 106

Condition: used, machine/vehicle number: H2X386V04688, Year of construction: 2019, operating hours: 21,389 h, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork length: 1,200 mm Fork adjustment range: 350–1,050 mm MACHINE DETAILS Lsdpfx Abjz Nwkno Aoru Mast type: Triplex mast with full free lift Battery: 48 V, 625 Ah, 5 PzS Battery year of manufacture: 23.06.2023 Battery voltage at rest: 51.1 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Service valid until: 07/2027 UVV (occupational safety) valid until: 07/2027 Operating hours: 21,389 h EQUIPMENT Former Linde full-service unit Fork positioner with side shifter Lateral fall protection, easily removable White, non-marking tires LED work light, front LED work light, rear Road traffic lighting with turn signals Safety light, front Safety light, rear Comfort seat with lumbar support and seat heating Facelift model with tilt angle indicator Hydraulics: 3rd and 4th valve All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not made on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 164

Condition: used, machine/vehicle number: H2X386V04486, Year of construction: 2019, operating hours: 22,973 h, load capacity: 1,800 kg, lifting height: 6,075 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork length: 1,200 mm Fork adjustment: 350–1,050 mm MACHINE DETAILS Mast: Triplex mast with full free lift Drive type: Electric Battery: 48 V, 625 Ah Battery year of manufacture: 2023 Battery voltage in idle state: 50.3 V Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,150 x 2,671 mm Own weight: 3,800 kg Lrjdez Nwpwjpfx Ab Asu Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 Operating hours: 22,973 h EQUIPMENT Former Linde full-service unit Facelift model with tilt angle indicator Lateral fall protection, easily removable White, non-marking tires LED work light, front LED work light, rear Road traffic lighting with turn signals Safety light, front Safety light, rear Comfort seat with lumbar support Seat heating Hydraulics: 3rd and 4th valve Side shifter All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. In case of non-compliance with the collection deadline, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 165

Condition: refurbished (used), Year of construction: 2015, operating hours: 6,700 h, load capacity: 2,500 kg, lifting height: 6,500 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,900 mm, fork length: 1,200 mm, empty load weight: 5,200 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONAL USE. Our forklifts are fully refurbished to FEM-4.004 specifications and the latest safety standards – for maximum quality and your safety. From the chassis to the battery, as well as drive system, brakes, steering, and electrics – each machine is thoroughly inspected and reconditioned. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles in stock ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test and receive advice on site – we will find the right solution for you. Industrial Truck Data Manufacturer: Jungheinrich Model: Counterbalance Forklift EFG 425k Drive type: Electric Load capacity: 2,500 kg Year of manufacture: 2015 Operating hours: 6,700 Lift height: 6,500 mm Mast type: Triplex with free lift Ledpfx Ao Afav Rjb Asru Initial lift: - Chassis length: - Overall width: - Overall height: 2,900 mm Fork length: 1,200 mm Unladen weight: 5,200 kg Load centre: 500 mm Tyres: Solid rubber Battery type: PzS Charger: On request Cabin equipment: Multipilot control element Lighting: 2x front work lights Attachment: Sideshift Attachment: Additional hydraulic circuit routed to fork carriage

Condition: used, gearing type: automatic, lifting height: 30,000 mm, Magni RTH 6.30 SH Forestry Crane Year of Manufacture: 2022 Hours: Only 982h KEY FEATURES: - EBERT Safety laminated safety glass against chain shots and deadwood, road-approved! - Protective grille for the front windshield - Enclosed boom - Boom wiper for the outriggers - LED spotlights for boom and cabin - Camera system (camera on the boom, front, side, and rear on the counterweight) - Extended radio remote control with sawing function and outrigger control - 40 km/h or 20 km/h - Vibration dampers - Support plates with holders Lsdpeyfrkdjfx Ab Asru EQUIPMENT - Maintenance-free wet disc brakes on the front and rear axles - Comfort seat with weight adjustment and armrests - Spacious pressurized cabin with air conditioning + heating - Operation via the clear 10-inch touch pad and navigation button - ROPS/FOPS cabin with optimal all-round visibility - 360° continuous rotation - 12 V socket in the cabin - Automatic leveling of the scissor supports - Attachment recognition - Leveling system on wheels - Lighting according to StVZO (German Road Traffic Licensing Regulations) - TÜV package + TÜV inspection - Individualization of maneuvers - Fork carriage with tines 1,200 mm AREAS OF APPLICATION - Safe removal of trees in sections. - Special tree removal in urban areas or settlements. - Maintenance work along roads and routes. - Problem tree removal. - Tree removal on slopes and embankments - Ideal for use in municipal areas - Removal of storm damage - Traffic safety and path safety Optional: - 600 tires as shown in the picture: +€4,990 net - Westtech WOODCRACKER® CS 750 Smart (cutting diameter 75 cm) = Price: +€20,000 net. We are an official Magni telescopic handler sales and service partner, Westtech Woodcracker sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We will provide you with the complete Westtech Woodcracker program! Upon request, we will provide you with a leasing or financing offer from Mercedes-Benz Bank. Further information can be found on our website. Errors and prior sale are subject to change! Rental possible = Further information = Year of Manufacture: 2022 Operating Hours: 982 Engine Make: Diesel Lifting Capacity: 6,000 kg Contact Tobias Ebert for more information.

Condition: used, gearing type: automatic, lifting height: 30,000 mm, Magni RTH 6.30 SH Forestry Crane - Year of manufacture: 2021 - Operating hours: only 1,373 hours! KEY FEATURES: - EBERT Safety armored glass windshield against chain impacts and deadwood, with road approval! - Protective grille for the windshield - Enclosed boom - Boom wiper for the outriggers - LED headlights for boom and cab - Camera system (camera on the boom at the front, side, and rear on the counterweight) - Extended remote control with saw function and outrigger support - 40 km/h or 20 km/h - Vibration dampers - Support plates with holder EQUIPMENT - Maintenance-free wet disc brakes on front and rear axles - Comfort seat with weight adjustment and armrests - Spacious pressurized cab with air conditioning + heating - Operation via the clear 10-inch touch pad and navigation button - ROPS/FOPS cab with optimal all-round visibility - 360° continuous rotation - 12 V socket in the cab - Automatic leveling of the scissor supports - Attachment recognition - Leveling system on wheels - Lighting according to StVZO (German Road Traffic Licensing Regulations) - TÜV package + TÜV inspection - Customization of maneuvers - Fork carriage with forks 1,200 mm Lrjdpoyfqwijfx Ab Aou AREAS OF APPLICATION - Safe removal of trees in sections. - Special tree removal in urban areas or settlements. - Maintenance work along roads and routes. - Removal of problematic trees. - Tree removal on slopes and embankments - Optimal for use in municipal areas - Removal of storm damage - Traffic control and road safety Optional: - Westtech WOODCRACKER® CS 750 Smart (cutting diameter 75 cm) = Price: +20,000 € net. We are the official Magni telehandler sales and service partner, Westtech Woodcracker sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply you with the complete Westtech Woodcracker range! Upon request, we will provide you with a leasing or financing offer from Mercedes-Benz Bank. Further information can be found on our homepage. Errors and prior sale are subject to change! Power steering, cab, protective roof, rental possible = Further information = Year of manufacture: 2021 Operating hours: 1,373 Engine brand: Diesel Lifting capacity: 6,000 kg Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2017, machine/vehicle number: 1000020374, functionality: fully functional, operating hours: 5,484 h, power: 12.8 kW (17.40 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: DC, travel distance X-axis: 3,280 mm, travel distance Y-axis: 1,660 mm, travel distance Z-axis: 240 mm, number of axes: 5, number of slots in tool magazine: 16, controller manufacturer: Biesse, actuation type: pneumatic, Equipment: CE marking, documentation/manual, We are selling a 5-axis machining center, Biesse Rover A 1632 Smart, manufactured in 2017. The machining center is in very good condition due to relatively infrequent use since its purchase. We are the first owner. I have attached the file "Cartellino_1000020374" to the listing below. This is a manufacturer's document describing the configuration of the offered machine according to Biesse standards. Technical specifications of the machining center: ‣ Working areas *: X = 3280 mm; Y = 1580 to 1660 mm, depending on operating conditions. Z = 200 mm (configuration with 5-axis unit, drilling head, and H=74 mm modules). Z ​​= 240 mm (configuration with 5-axis unit, drilling head, and H=29 mm modules). ‣ Configuration 2 Lsdpjz R I U Iofx Ab Aoru ‣ 6 ATS tables – 18 carriages ‣ Rear row stops with 115 mm travel and 25 mm extension. ‣ Intermediate row stop located at coordinate 1190 mm with 140 mm travel. ‣ 4 side stops with 140 mm travel (2 right + 2 left) with pneumatic system. ‣ Sensor to verify stop retraction. ‣ 4 support bars for H=74 mm modules. ‣ Claw-type vacuum pump with 250 m³/h capacity. ‣ Vacuum module – Size 132x146 – H74 mm with high-friction surface and pre-installed vacuum seal. ‣ Vacuum module – Size 132x75 – H74 mm with high-friction surface, pre-installed vacuum seal, and pre-installation for locating pins. ‣ Vacuum module – Size 132x54 – H74 mm with high-friction surface, installed vacuum seal, and pre-installation for locating pins. ‣ Automatic lubrication system. ‣ Sawdust and chip removal conveyor. ‣ 5-axis interpolating machining unit, 13 kW (17.4 HP), HSK F63 tool holder, liquid-cooled. ‣ Coolant supply unit. ‣ Additional Z-carriage for machining units, controlled by an independent Z-axis. ‣ BH 17 L drilling head. ‣ 16-position rotary tool magazine on the X-carriage. ‣ 12-position linear tool magazine mounted on the machine frame. ‣ HSK F63 adapter with integrated flange for saw blades used in 5-axis units. ‣ 300 mm diameter saw blade for integrated-flange mounting. ‣ bSolid software. If the information above is insufficient, please contact me and let me know what you would like to know. Upon request, I can provide a document in English with a detailed description of our machining center's layout. Best regards, Ihor Balychev.

Condition: as good as new (ex-display), Code: N0506 Brand: FELDER - AUSTRIA Model: K 700 S – CE Standard Precision panel saw with tilting blade and scoring unit - CE Standard Technical data: Lrjdpfozqd Htex Ab Asu Tilting guide system “Easy-Glide” “Power-Drive” for automatic adjustment of blade height and tilt Carriage length 3200 mm Blade inclination 90/45° Cutting width 1250 mm Max blade diameter315 mm Bore 30 Rpm 4800 Max cutting height at 90°104 mm Max cutting height at 45° 72,7 mm Adjustable scoring unit - blade diameter 120 mm – Bore 20 rpm 8600 Main blade motor 7,5 Hp Tilting guide on fence 0,45° Support roller on fence Dust extraction connection diameter 120 mm Upper blade dust extraction diameter 50 mm Overall dimensions of assembled machine mm 3400 x 3400 x 1050 h Weight kg 740

Condition: ready for operation (used), functionality: fully functional, operating hours: 4,777 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Still Type: RX20-18 Year of manufacture: 2019 Drive type: Electric Operating hours: 4,777 h Load capacity and mast Load capacity: 1,800 kg Lifting height: 4,500 mm Mast type: Triplex mast Full free lift: available Battery Battery year of manufacture: 2019 Battery voltage: 48 V Battery capacity: 625 Ah Measured idle voltage: 50.83 V Hydraulics Hydraulic valves: 3rd and 4th valve Side shifter: available Hydraulic fork positioner: available Inspections and maintenance Service valid until: 10/2027 UVV inspection valid until: 10/2027 MACHINE DETAILS Dimensions and weight Length: 3,000 mm Width: 1,150 mm Height: 2,060 mm Own weight: 3,400 kg EQUIPMENT Battery charger Fork positioner with side shifter Lateral fall-through guard LED work light at the rear Orange warning light Comfort seat with lumbar support Seat heating Lot number: 219 Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. Lrsdpfxj Ad N Dnj Ab Aeu If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection.

Condition: refurbished (used), Year of construction: 2017, operating hours: 7,757 h, load capacity: 5,000 kg, lifting height: 4,500 mm, load center: 500 mm, fuel type: diesel, mast type: duplex, construction height: 3,050 mm, fork length: 1,200 mm, empty load weight: 6,961 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished in accordance with FEM-4.004 and the latest safety standards – delivering maximum quality and safety. From chassis to battery, through to drive, brakes, steering, and electrics – every vehicle is thoroughly inspected and overhauled. ? Made in Germany – with responsibility and precision ? Strict technical inspection ? 400+ vehicles available ? Worldwide shipping & customs clearance ? Service & spare parts at fair prices ? Personal support – even after purchase Test on site and receive expert advice – we’ll help you find the right solution. Industrial truck data: Manufacturer: Jungheinrich Type: Counterbalance Forklift DFG 550s Drive: Diesel Load capacity: 5,000 kg Year: 2017 Operating hours: 7,757 Lift height: 4,500 mm Mast type: Duplex Free lift: No Overall height: 3,050 mm Fork length: 1,200 mm Unladen weight: 6,961 kg Load centre: 500 mm Tyres: Solid rubber Lsdpfx As Afauajb Aeru Model: DFG 550s Cab type: Full cabin – front, roof & rear window + steel doors (suspended) Cab equipment: Solopilot control unit Cab equipment: Adjustable cabin heating Cab equipment: Adjustable cabin air conditioning Lighting: 2x front work lights Lighting: Rotating beacon Attachment: Side shifter Attachment: Additional hydraulic circuit – routed to fork carriage

Condition: used, machine/vehicle number: H2X393V04197, Year of construction: 2019, operating hours: 24,689 h, load capacity: 3,000 kg, lifting height: 3,615 mm, mast type: duplex, fork length: 1,350 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 3,615 mm Fork length: 1,350 mm Telescopic forks: up to 2,350 mm MACHINE DETAILS Mast type: Duplex mast with full free lift Drive type: LPG Fuel system: LPG gas tank Dimensions & Weight Dimensions (L x W x H): 4,200 x 1,250 x 2,441 mm Weight: 4,680 kg Next service due in: 311 hours UVV certification valid until: 07/2027 Operating hours: 24,689 hours EQUIPMENT Former Linde full-service unit Tilt angle indicator Full cabin Heater Windshield wiper LED work light (front) Lredpez Npl Defx Ab Aou LED work light (rear) Safety light (front) Safety light (rear) Safety light (side) Rear-view camera Comfort seat Lumbar support Seat heating Functional and condition video available Hydraulics: 3rd and 4th hydraulic valve Side shifter Integrated scale All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged if the machine is not collected on time. Outstanding storage fees must be paid in full before collection. Lot number: 96

Condition: used, machine/vehicle number: H2X351N03744/30, Year of construction: 2002, operating hours: 15,752 h, load capacity: 3,000 kg, lifting height: 5,900 mm, mast type: triplex, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! The engine was overhauled in 2024! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 5,900 mm Fork length: 1,150 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,300 x 2,650 mm Own weight: 5,100 kg UVV valid until: 10/2026 Drive type: LPG Engine manufacturer: Perkins Engine overhaul: 2024 Operating hours: 15,752 h EQUIPMENT Former Linde full-service unit Load protection grille Full cabin Heater White, non-marking tires Windshield wiper LED work light (front) LED work light (rear) Comfort seat with lumbar support LPG gas cylinder with changeover valve Full free lift Lrodpjz Nvqmefx Ab Asu Hydraulic fork positioner Side shifter 3rd and 4th valve All dimensions are approximate. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Loading from the rear via ramp is possible for a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the deadline, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 113

Condition: ready for operation (used), functionality: fully functional, operating hours: 10,598 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL Manufacturer: Still Type: RX60-30 Year of manufacture: 2020 Drive type: Electric Operating hours: 10,598 h LIFTING CAPACITY AND MAST Lifting capacity: 3,000 kg Lifting height: 4,150 mm Mast type: Duplex mast Fork length: 2,400 mm BATTERY Battery voltage: 80 V Battery capacity: 620 Ah Battery year of manufacture: 2020 Battery date: 18/2020 (?) Battery voltage in idle state: 84.9 V INSPECTIONS AND MAINTENANCE Service valid until: UVV inspection valid until: MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 4,900 mm Width: 1,200 mm Height: 2,750 mm Weight: 5,100 kg EQUIPMENT Former Still full-service unit Clear-view mast without center hydraulic cylinder 3rd and 4th hydraulic valve Hydraulic fork positioner Side shifter Half-cab with windshield wiper White, non-marking tires LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat with lumbar support Lot number: 155 Lrsdpfs Ad N Dhsx Ab Aju Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection.

Condition: used, Year of construction: 2012, Technical details: y-travel: 1500 mm distance between columns: 2300 (Brücke) mm Beam Hour: ca. 22000 h laser capacity: 6000 W control: CNC P 8109-10-600D table length: 4500 / Auflage: mm Table width: 2300 mm operating pressure: 120hPa Waterpressure - requiered: max. 6,0 bar voltage: 400 / 50 V / Hz dimension laser device LxWxH: ca. L: 3,0 x B: 1,5 m dimension filtering system LxWxH: ca. 1,4 x 2,0 x 2,2 m dimension coolant device LxWxH: ca. 2,55 x 1,0 x 1,9 m space requirements of the machine approx.: gesamt: ca. 12,8 x 5,3 x 4,3 m Flatbed laser cutting machine Application: ind. Cutting and engraving Laser medium Co²; N²; compressed air Sheet dimensions/format 3000x 1500mm Cutting thickness: e.g. steel X5CrNi18-10 = 1 - 25mm / CNS 25mm / aluminum: 1 - 15mm (Tabb. available) Lrsdpju Nu R Iofx Ab Aju Resonator - laser source ByLaser 6000W, wavelength 10.600mm, beamØ 20mm, circular polisariation Shuttle table LxWxH: 4500 x 2300 x 1000mm, load capacity 900kg, table support surface = 3200 x 2000mm Rf cooling type WKL 560, refrigerant R 407C, cooling capacity 65kW, high pressure 27bar, pump 220 l/min, fan Dedusting system, Donaldson type DFPRO6 (size approx. 1.4 x 2.0 x 2.2m) Cross conveyor by Kabelschlepp type SRF 040 (size LxW.H: approx. 3630 x 705 x 1000mm) Light barrier Sick type M 4000 Cutting bridge: Y-path 3000mm, stand width 2300mm, cutting carriage size LxWxH: 400 x 300 x 650mm Operating terminal with complete cabinet combination and manual control unit Cut Control *

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Lrsdoy Ehrxspfx Ab Asu Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, spindle speed (max.): 1,450 rpm, grinding spindle motor power: 7,500 W, grinding wheel diameter: 250 mm, We are a family producer of machines based in eastern Poland. All our machines are in 100% build in GRAFS factory in Poland. We present our heavy-duty but simple straight knife grinder suitable for a broad range of industrial knives, machine designed especially for: - different recycling blades, - chipper knives, (ALBACH, JENZ, BRUKS), - planer knives, - guilotine blades, - shredding knives, - granulator blades, The knife sharpening machine model SR Semi-auto can be supplied in different grinding lengths: mm 1.200, mm 1.800, mm 2.100 mm, 2.400 mm, 3.000 mm Sending inquiry to us, please let us know what grinding length you need. TECHNICAL FEATURES IN PRESENTED MODEL GRAFS SR: • Hand wheel for down feed of the grinding motor, • Automatic mechanical downfeed system (from 0,003 mm up to 0,03 mm) • Adjustable grinding parameters during operation (downfeed, number of head passes, spark-out passes). • Grinding wheel motor angle adjustment within 0–10° (for surface grinding). • Swiveling electromagnetic chuck / table with ±120° angular scale, “S” type polarity, magnetic force 120 N/cm². Equipped with T-slot channel on the operator side for clamping knives. • Exchangeable hardened steel guide strips on the machine guides ensuring long service life. • Manual positioning of the grinding head over the workpiece, (possibility of locking and unlocking carriage driving unit by lever), • Carriage movement relative to the trolley in the Y-axis, for centre head position relative the different knives angles. • Quick vertical travel of the grinding motor for faster setup and efficient grinding wheel replacement. • Reversal of grinding wheel rotation, • Powerful 7,5 kW grinding wheel motor for wheel sizes Ø175–250 mm. Quiet, vibration-free special grinding head, soft-start included, • Special wheel holder/adapter mounted on the motor shaft, allowing fast change of any grinding wheel (CBN, DIA, or segmented) using just 3 screws. • Automatic external magnetic coolant cleaner – MS60. • Variable carriage speed smoothly adjustable in the range 1–12 m/min. • Carriage run adjustment knob (potentiometer) for fine control. • Precision scale for downfeed / grinding motor position measurement. Lrjdpfx Aegwct Dob Aju • Precision scale for blade angle measurement. • Complete documentation: manuals, operating system, electrical diagrams in English / German / Czech / Spanish, including EU Declaration of Conformity. • Base of the machine surface finish and protection: polyurethane anti-rust coating with acrylic hardener. Body painted RAL7012 or RAL7035; trolley and carriage RAL7021. • Adjustable anti-vibration leveling feet. • LED lamp in working area. • Very compact electric cabinet at the back of the machine base / body. • Coolant through the 2 nozzles either side of the grinding wheel, • Packing, shipment preparation, and truck loading included. FUNCTIONS INCLUDED: • Automatic down feed with mechanical feed system by ratchet, • Grinding wheel motor angle adjustment 0–10° (surface grinding option). • Smooth adjustment of carriage/head speed 1–16 m/min. • Manual positioning of the grinding head over the workpiece. • Carriage relative movement in the Y-axis. • Capability of grinding knives up to 360 mm in height. • Quick up/down travel of the grinding motor for fast setup and wheel replacement. • Automatic coolant filtration system. We are a producer from Poland, we provide after sale support and service with 12 month's warranty.

Condition: new, Year of construction: 2026, Miter and compound miter saw with a maximum cutting height of 170 mm sturdy cast iron construction precise ball bearing guide for the tool carriage on hardened and ground steel shafts manual saw feed quick miter adjustment up to 65° horizontal adjustable fixed stops lower saw blade guard, can be connected to a dust extraction system Model-----Motor-----Speed-----Cutting length ZS 170: 400 V / 2.0 kW--3500 rpm---410 mm (at 90 degrees) Model-----Cutting height----Miter range horizontal ZS 170 ----- 170 mm----- 45 degrees -90 degrees Model-----Saw blade-----Dust extraction port-----Weight ZS 170 -----420 mm----- 100 mm ----- 120 kg Accessories available upon request: Roller conveyor / fence type RO, RL, RLK, RLH and RLHK for processing aluminum and PVC profiles and for wood profile board processing the modular roller conveyor system can be supplied as: Ljdjcnz N Hopfx Ab Aoru 3 m type RO: infeed roller conveyor with at least 2 support feet 3 m type RLK: roller conveyor fence with a fence slide that can be folded back - Machine stand - Main switch with lock - Infeed roller conveyor Ro-St60 3 meters, right - Roller conveyor RLK-ST60 L 3.0 meters, measuring length Heavy-duty fence/roller conveyor mm - scale on the rear beam, measuring slide with magnifying glass and fence flap - Saw blade 420 x 3.5 x 40 Z 84 Neg Location: In stock at 54634 Bitburg - free loading - - immediately available - Location: In stock at 54634 Bitburg - free loading - - immediately available -

Operating hours: 6,836 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lredjz R D Ayjpfx Ab Aou Load capacity: 2,000 kg Lifting height: 4,620 mm Free lift: Full free lift Mast: Triplex mast Fork length: 1,200 mm Fuel: LPG Operating hours: 6,836 h UVV valid until: 09/2027 Next service due in: 204 operating hours MACHINE DETAILS Manufacturer: Linde Type: H20T Year of manufacture: 2016 Own weight: 3,290 kg Overall length: 3,400 mm Overall width: 1,150 mm Overall height: 2,200 mm EQUIPMENT Side shifter 3rd hydraulic valve 4th additional hydraulic valve, free for fork positioner Half cab Windshield wiper Non-marking white tires LED work light (front) LED work light (rear) Orange warning light Safety light (front) Safety light (rear) Comfort seat with lumbar support Seat heating LPG gas exchange bottle Previously a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified period, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 213

Condition: new, Panel saw VPS 22-51 VR ED KS Holzkraft -Exhibition machine- -----Technical data----- Cutting length: 5100 mm, Cutting height: 2200 mm, Cutting depth: 60 mm, Saw blade diameter: 250 mm, Motor: 3 kW, Dust extraction port diameter: 100 mm, Space requirement (L x W x H): 6300 x 1800 x 3200 mm - Clamping force of clamping system: 250 kg Dust extraction connection: - Dust extraction port diameter: 100 mm - Minimum air flow for dust extraction: 1800 m³/h - Minimum air velocity: 20 m/s Lrodpfxownrf Us Ab Asu Equipment: - Lower material support: metal rollers - Adjustable slat bed: automatic - Vertical dimension display: digital - Horizontal dimension display: digital - Panel clamping system - Locking of the saw carriage: pneumatic Electrical data: - Power of drive motor: 3 kW - Connection voltage: 400 V - Mains frequency: 50 Hz - New exhibition machine -

Condition: new, Year of construction: 2026, overall weight: 260 kg, total length: 25,080 mm, total width: 15,000 mm, total height: 24,250 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This pallet wrapper is a new machine in stock. This machine comes with a 24-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! About this model: Our pallet wrapper "Basic" is a semi-automatic stretch wrapper from Eurapa production, which guarantees absolutely consistent results due to up to 10 storable programs and thus offers the safe exclusion of the "human factor". With the electromagnetic brake, the tension of the film can be adjusted to your requirements and saved in the programs. The programs also allow you to set how fast the film carriage and turntable run. Head and foot windings can also be saved for each program. In this way, you can store individual programs for each wrapping pattern to achieve perfect wrapping results every time. With a weight of 260 kg, this model is suitable for loads of up to 1200 kg. Our Basic pallet wrapper has a 1500 mm turntable and can wrap pallets up to 2000 mm high as standard. Automatic detection of your pallets (via photocell) is a matter of course, as are adjustable head and foot wraps. If the wrapper needs to be used at a different location in the meantime, it can be easily lifted and moved with a forklift truck via integrated cut-outs. This model is our recommendation if you want a good and affordable pallet wrapper that can be adapted to your needs. About us: Business is done between people - we are convinced of that! A supplier delivers the ordered goods - a partner can do more: he helps you to find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. Ljdjz E Il Hopfx Ab Aoru For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edge banding machine F2 next Ledpolht Hzofx Ab Asru With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment (radius, bevel, flush milling)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, total length: 495 mm, total height: 780 mm, total width: 585 mm, overall weight: 17 kg, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading are to be organized by the buyer! The system is available immediately! TECHNICAL DETAILS Build volume X-axis: 230 mm Build volume Y-axis: 190 mm Build volume Z-axis: 200 mm Layer height: 0.06–0.4 mm Build plate: Heated glass plate Build plate temperature: up to 120 °C Filament diameter: 2.85 mm Nozzle temperature: up to 280 °C Print speed: up to 150 mm/s Material flow: up to 24 mm³/s Compatible print cores: AA 0.4; BB 0.4; AA 0.25; AA 0.8; BB 0.8; CC 0.4; CC 0.6; DD 0.4 MACHINE DETAILS Technology: Fused Deposition Modeling (FDM) Software Print preparation: UltiMaker Cura, Cura Cloud Printer management: UltiMaker Digital Factory Supported operating systems: Windows, macOS, Linux Environmental conditions Operating temperature: 15–32 °C Operating humidity: 10–90% RH, non-condensing Storage temperature: 0–32 °C Non-operating humidity: 10–90% RH, non-condensing Installation: Away from direct sunlight Lsdsz Tf D Dspfx Ab Asru Power supply: 100–240 V AC Mains frequency: 50–60 Hz Power consumption: 350 W Operating noise: < 50 dB(A) Connectivity: WLAN 2.4 GHz, LAN, USB Monitoring: HD camera Dimensions & Weight Dimensions: 495 × 585 × 780 mm Net weight: 14.4 kg Operating weight: approx. 17 kg EQUIPMENT Dual-extrusion print head Automatic nozzle lift system Interchangeable print cores Dual-gear feeder Filament flow sensors Dual spool holder with NFC detection Color touchscreen HD camera Heated glass plate PEI print bed Spool holder with material guide Power cord Ethernet cable USB stick Operating manual CE marking Print Core AA 0.4 – 2 pieces Print Core BB 0.4 – 1 piece Nozzle cover – 3 pieces

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: AC, Equipment: documentation/manual, saw blade guard, scorer, General data: - 15 kW connection power at 4000 rpm for the electric motor. - 6-7 bar air requirement. Lrsdpe Abbhgefx Ab Aou - Extraction capacity requirement of 2500 m3/h at 120 mm and 75 mm extraction nozzles. - Stable supporting structure with work tables made of phenolic resin, ribbed, to allow the passage of grippers and plastic wheels over galvanized support tables. - Slider/positioner, electronically controlled and movable with a linear speed change of up to 70 m/min, equipped with a brushless Schneider motor in digital CAN-Open technology, with 7 pneumatic clamping devices (grippers). More than optional. - Automatic side alignment on the cutting line. - Saw carriage with variable speed, controlled by an inverter from 0 to 100 m/min via THK linear guides + constant monitoring by an ammeter to reduce the cutting speed in case of saw blade wear and to ensure good cutting quality even with hard materials. - Possibility of grooving the panels via a grooving program. - PC for complete control of the machine and graphics software under Windows, to perform longitudinal and transverse cuts on the same panel, with all cuts displayed simultaneously, classic cut optimization with visualization. Computer PC HP EliteDesk 800 G2 Desktop Mini Business PC – ALL IN ONE compact Model 90GA Processor type Intel Core i5-6500T 2.5 GHz, 6th generation RAM 8 GB DDR4 SSD 240 GB NETWORK CARD and connection WLAN USB OR port adapter USB/port RJ45 USB ports: 6 USB 3.0 – 1x USB C – 2x Display Port – 1x VGA – 1x LAN Color Monitor LED Full HD 21.5” HP keyboard HP mouse 1 year warranty with PC replacement - Direct connection between office and machine via USB or the network. - 24 months warranty (Schneider electronics 15 months). - Delivery 60-120 days after order. Horizontal and vertical panel saws.