Used Stork Imm Sx S 2000-1450 for sale (72,654)

Condition: ready for operation (used), Year of construction: 2009, operating hours: 13,000 h, clamping force: 2,100 kN, screw diameter: 50 mm, Hydraulic injection moulding machine manufactured in 2009. This SUMITOMO SHI DEMAG Systec 210/580-1450 features a clamping force of 210 t and a screw diameter of 50 mm. It offers a maximum specific injection pressure of 2426 bar and a maximum swept volume of 530 cm³. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG Systec 210/580-1450 machine we have for sale. Contact us for further details. Nwjdsz Er Dtopfx Af Ssl - Max. Specific Injection Pressure: 2426 bar- Max. Swept Volume: 530 cm³- Mold Height (Min/Max): 340 mm / 790 mm- Tie-Bar Distance: 580 x 580 mm- Centering Ring Diameter (Ejector/Nozzle): 160 mm / 160 mm- Operating Hours: 13,000 hrs (Drives)- Core Pull: 1 circuit- Pump Drive Power: 30.0 kW- Power Supply: 400 V ±10% / 50 Hz, 3 Ph+N+PE- Feed Zone Cooling: Regulated temperature- Hydraulic Screw Drive: Motor I (high speed)- Nozzle Specifications: Open nozzle M24x1.5, Radius 38.0 mm, Bore 3.0 mm- Water Connection: 8-fold cooling water flow regulator with temperature display (max 10 l/min per circuit), separate connections for mold and machine cooling- Socket Combination: Integrated, 2 x Schuko 1Ph/230V/10A, 2 x IECEE 3Ph/400V/16A

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Please note that the photos probably show two different ovens, both are very similar. Nwedpfsmrrwfox Af Ssl

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED FEED MOTOR 22 KW FEEDRATE MAX 100 M/MIN 300MM WIDE MOULDER 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED Njdpsz Dnr Rjfx Af Sjwl VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED SPINDLES 6,000RPM WORKING WIDTH 300 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 4 BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW MAIN MOTOR POWER 30 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS CONFORMITY MARKING CE MARK TOTAL CONNECTION 126 KW

Year of construction: 2004, condition: good (used), functionality: fully functional, Wrapping machine Manufacturer: Böhl Type: BSB-45 SX-2 Year of manufacture: 2004 Total power consumption: 2.5 kW Product dimensions: Width: 5-250 mm Height: 5-250 mm Length: 600-6000 mm Machine weight: 950 kg Nwsdpfx Aeznczdef Ssl Includes roller tables: 2 x 4 m

Condition: good (used), Year of construction: 2017, Max. turning diameter 366 mm Max. turning length 510 mm Bar capacity Ø 65 mm Travel ranges X / Y / Z 260 / 100 / 590 mm Main spindle 5,000 rpm Counter spindle 6,000 rpm Driven tools 10,000 rpm · 29 Nm Nwodpszy U Nwefx Af Sjl Turret 12 stations, BMT Controlled axes X, Y, Z, C, B Machine weight 5,500 kg Connection current max. 115 A - Y-axis milling off-center, complete machining in a single setup - Counter spindle with synchronized transfer – machining the back side without re-clamping - Built-in motor turret (BMT) drive in the turret, stiffer and more thermally stable than VDI systems - Tool measuring probe for both spindles - Bar loader LNS Quick Load Servo 65 for bars up to Ø 65 mm, unmanned series production - Parts catcher and parts conveyor for gentle parts removal - Chip conveyor, high-pressure coolant supply - CELOS with ERGOline 21″ touch control panel Machine running time approx. 14,100 hours Program running time approx. 9,900 hours Machine price excluding shown accessories (extensive accessories can be purchased separately) Errors and prior sale excepted. The machine can be inspected under power with short notice.

Condition: good (used), Year of construction: 2005, AUTOMATIC CAB SPRAY CEFLA EASY 2000 D Producer: CEFLA Type: EASY 2000 Year of production: 2005 Product number: 05026/4 Electronic painting system SPRAY CABIN ECOSPRAYER EASY 2000. The gun guide system consists of two carriages (holding 4, 6 or 8 guns each). Electronic regulation of speed and accelerations / decelerations allows for precise painting of objects. The "BACK SPRAY" varnishing system allows for precise and even distribution of the varnish between the edge and the surface. The transport system with a constantly rotating belt allows the recovery of the product splashed (varnish / paint) from the belt. Working pressure of the feed pump - 6 bar Spraying air working pressure with guns - 1÷4 bar Working air pressure for opening the guns - 5÷6bar "BRUSHLESS" engine power - 2 kW Gun speed -120m / min Details travel speed - 2-10.6 m / min ROLLER TRANSPORTER type PRN-6.3 Producer: MCRS Type: PRN-6.3 Year of production: 2018 Product number: 18014/1 Nedpfx Aszumvxjf Sswl Working height - 920 mm +/- 50 Roll working width -1610 mm Total width - 1700 mm Roll diameter - 53 mm Total length - 6300 Movement speed - 20 m / min Weight - 320 kg Power supply - 400V 50Hz 6 bar TRANSPORTER PPR1050 Producer: CEFLA Type: PPR 1050+ TRC2500 / 2V / 125 Year of production: 2005 Product number: 05026/14 Transporter with a length of 1050 mm and a working width of 1250 mm with two speed ranges: low from 1.7-11.3 m / min (corresponding to the spraying speed of the spray cabin) and high 21.2-59 m / min (for the time of loading into the dryer carousel). Main engine power 1.72 kW. TRANSPORTER TRC2000 Producer: CEFLA Type: TRC 2000/125 Year of production: 2005 Product number: 05026/1 Transporter with a length of 2000 mm and a working width of 1250 mm. The transporter is driven by a 0.25 kW engine and reaches a speed of 1.7-10.7 m / min. CEFLA OVEN (drying room) Producer: CEFLA Year of production: 2005 Machine for the complete or partial drying of paint products that are applied to the parts to be treated, such as linear panels of all kinds. Vertical two-zone platform oven with warm air drying. Evaporation fan flow - 2x8000 m3 / h Drying fan flow - 8000 m3 / h Installed thermal power - 130,000 Kcal / h Total installed power - 17 kW Compressed air consumption - 92 Nl / min Platform length - 3500 mm Overall dimensions - 5192x4120x4524 mm TRANSPORTER TRC3500 Producer: CEFLA Type: TRC 3500 / 2V / 125 Year of production: 2005 Product number: 05026/16 A conveyor with a length of 3500 mm and a working width of 1250 mm with two speed ranges: low from 1.7 m / min and high up to 10.7 m / min - for the time of unloading from the carousel dryer. Main engine power 2.2 kW.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 5-axis CNC turning and milling center Okuma Multus B550-C 2000 Control: OSP-P300SA-H Year of manufacture: 2019 Internal machine number: 71 Nwodpfjzwulyjx Af Sjl Travel distances: X-axis: 925 mm Y-axis: 520 mm Z-axis: 2,215 mm Distance between centers: 2,000 mm Turning diameter over bed: 830 mm Spindle bore: 112 mm Tool holder HSK-A100 40-position tool changer Programmable steady rest with hydraulic quill Equipment - Chip conveyor Interlit ISF - Full-stroke cylinder - 6-jaw power chuck SMW Ø 500 IEP - Manual rinsing gun - Drum – trough filter TMF300/980/20 - IFS filter system IFE 5000 - Robot interface Type E - One Touch IGF - Software for input resolution of 0.1 µm - Software package for simultaneous 5-axis machining VTM-1200YB and VTM-2000YB - In-process measurement with Renishaw measuring probe for X/Z/C axis - Automatic zero point adjustment in the Z-axis of the main spindle - High-precision C-axis - Turning function for NC B-axis - Interpolation turning with the X/C/Z axes

Condition: good (used), Year of construction: 2000, functionality: fully functional, Very robust lathe with a rigid machine bed. L + Z hollow spindle lathe Manufacturer: Grutzpe Model: 2000 / 500 Super AT Turning diameter: 1000 mm Distance between centers: 530 mm Hollow spindle diameter: 140 mm Distance between centers above the compound slide: 530 mm Nwsdpfxez D Dt Do Af Ssl Turning length: 2000 mm Bed width: 420 mm Chuck diameter: 315 mm Bridge Dimensions: 6500 x 2200 x 2000 mm Weight: 10,000 kg Accessories: Various Further details: see images

Condition: like new (used), Year of construction: 2008, functionality: fully functional, pressure: 10 bar, operating pressure: 10 bar, For sale: a LOOS steam boiler with a gas burner. Type: UL-S 2000 Optionally available with an oil burner. Nwjdpfsyllf Iox Af Sel Complete unit. The system is in new condition and has not been used in operation. Steam output: 2000 kg/h. Maximum steam pressure: 10 bar. Delivery available at an additional cost. On-site inspection possible. Please feel free to contact us if you have any questions.

Condition: ready for operation (used), Year of construction: 2000, SAMSYS MUS 2000 / Bar Feeder Magazine -CE marking -Year of manufacture 2000 -Country of origin: Switzerland -Bar diameter: 5 - 80 mm -Bar length: 250 - 1550 mm -Longitudinal movement: 600 mm Nwsdpfoz Eqwxjx Af Sjl -Height adjustment: 775 - 1175 mm Dimensions: L x W x H 2.2 x 1.1 x 1.7 meters / Weight 500 kg Subject to errors and omissions.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MC 0120, turning diameter over cross slide: 270 mm, spindle bore: 70 mm, turning diameter: 460 mm, turning diameter over bed slide: 460 mm, turning diameter over top slide: 270 mm, center height: 230 mm, turning length: 1,500 mm, feed length X-axis: 1,500 mm, total length: 3,045 mm, total width: 1,200 mm, total height: 1,450 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 60 rpm, type of input current: three-phase, overall weight: 2,700 kg, Colchester Mascot Gap Bed Lathe Model: Mascot 2000 Vari Speed Swing Over Bed: 460mm Swing In Gap: 730 x 216mm Distance Between Centres: 1500mm Nsdezux Elepfx Af Sswl Spindle Speeds: 60-2000 RPM (variable) Spindle Bore: 76mm Motor: 11KW Machine With: 300mm 3 Jaw Chuck 600mm Face Plate Digital Readout Quick Change Toolpost with Holders Dimensions: 3045 x 1200 x 1450mm high Weight: 2700 Kgs

Condition: excellent (used), Year of construction: 2003, For calibration of solid wood/hard wood In line machine ( Fixed table hight : 900 mm ) Max working width : 52 - 1350 mm Min working lenght : 400 mm Working hight : 4 - 170 mm ( Digital motorized up/down ) Infeed speed : 3 - 18 mtr/min Configuration : Nodpfx Aszuvy Hef Sswl 1 agg : Steel Roller/drum, 45 Kw 2 agg : Rubber roller/drum, 37 Kw (schore 85 ) 3 agg : Brush Extra new steel roller/drum + extra new rubber roller/drum included ( see pictures attached ) Extra 15 package of sanding paper included( brand new )

Condition: good (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 790 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 2,000 W, laser wavelength: 1,080 nm, Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine AIRTECH 2kW – Top Technology for Efficient Sheet Metal Welding Demonstration Unit – Excellent Condition Discover the smart and high-performance solution for precise laser welding: the Airtech handheld laser welding system with 2,000 watts of power! Perfectly suited for demanding sheet metal fabrication – efficient, safe, and highly versatile. Highlights and Features: - Power output: 2,000 watts for superior weld quality and speed - Laser wavelength: 1080 nm, continuous operation with modulation frequency up to 20 kHz - Handheld laser welding head – ideally designed for ergonomic operation - Robust housing and intelligent internal structure for maximum durability - Touchscreen display for intuitive operation - Optional automatic multifunctional wire feeder - Safety features: three-color alarm, safety interlocks, and protection against operating errors Nwodpfx Afjn Sl Dbs Sjl - Cooling via separate water circuit with 13-liter tank capacity - CE-certified components according to European standards Your Benefits - Work safely thanks to comprehensive protection mechanisms and alarm systems - Flexible applications, including automatic wire feed and robot integration - Low operating costs and easy maintenance due to well-designed engineering and long-life components For more information or consultation, the Airtech team will be happy to assist you!

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Nwjdpfozizkyox Af Sel Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, Year of construction: 2023, control SIEMENS SINUMERIK 828D greates pass round over bed 650 mm swing diameter over slide rest 540 mm max. turning diameter 395 mm bar material dia. 67 mm x-axis 235 mm y-axis 105(±52.5) mm z-axis 580 mm Feed ( x / y / z) 24/10/24 mm/min spindle tunring speed 4.500 U/min torque 169,8/89,2 Nm spindle nose A2-6 spindle passage 76 mm spindle bearing diameter 110 mm drive capacity - main spindle 20/10,5 kW spindle tunring speed 6.000 U/min torque 45 Nm spindle nose A2-5 spindle passage 45 mm spindle bearing diameter 90 mm Drive power - sub spindle 7,8 kW number of tool places 12 Pos. shank size for square tool 25 x 25 mm Shank diameter for boring bars 40 mm tool taper BMT 55 Live tool torque (Max./Cont.) 44,4/23,4 Nm total power requirement 49 kVA Overall size ca. 4.130 x 1.752 x 2.085 mm weight of the machine ca. 4.200 kg In our assessment, the machine is in mint condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery Nwjdpfx Afezzrhyo Ssl only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Nwedpfx Aszl A Raof Ssl Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage

Condition: ready for operation (used), Year of construction: 1981, Available for immediate pickup from our location: Hydraulic plate shear, Köllschen Type BSH 2000/12.5 Year of manufacture: 1981 Cutting length: 2050 mm Nwjdpfjzwuh Uex Af Sel Material thickness: up to 12.5 mm Electric back gauge, adjustable from 5 – 1000 mm Drive power: 15 kW Weight: 11 tons Price: EUR 2,500.00 plus VAT, ex works.

Condition: good (used), Stork JBT 2000L vacuum tumbler Nedpfxszt Ibmo Af Sswl Stainless vacuum tumbler, 2000L capacity, forward and reverse, with timer controls, 3Ph

Condition: new, mileage: 500 km, power: 290 kW (394.29 HP), fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro3, Equipment: ABS, air conditioning, Mercedes Benz Arocs 5 4140 8x4 EURO3 with Schwing concrete pump S 43 SX III First registration: without registration (registration in Europe not possible) Mileage: 500 km Nedpfx Afei Ti Ume Sewl Color: Arctic white Technical data * Power: 290 kW * Horsepower: 394 hp * Front axle tires: 315/80R22.5 * Rear axle tires: 315/80R22.5 * Total weight: 41,000 kg * Emission class: Euro 3 * Transmission: Automatic (Mercedes-Benz Powershift 3) * Condition: New vehicle * Wheelbase: 5750 mm Chassis equipment * Twin-disc clutch * M cab, Low Roof, 2.30m, tunnel 170mm * Front axle: 7.5t, straight design * Rear axle, bevel gear 300, planetary gear 13.4t * Transmission oil cooler * Steering system: Servotwin * Fuel tank: 390L, aluminum * Sun visor * Air conditioning * ABS + ASR * Driver's seat: Schwing seat * Radio with USB, instrument cluster 10.4cm * Pre-wiring for CB radio * Pre-wiring for rotating beacons * Cruise control Superstructure equipment * Schwing S 43 SX III 5-arm concrete pump * Number of joints: 5 * Delivery line: Super 2000 DN 125 * Vertical reach: 42.30m * Horizontal reach from swivel: 37.55m * Placing boom: 43RZ * Pump type: P2525-120/85 * Theoretical concrete delivery rate: 162 m3/h * Vector control system * Slide system: B-Rock * Electric vibrator on hopper grid * Swivel range: 2x 365° * Outrigger system: Full support, CE * Filling height: approx. 1350mm * Hydraulic drive, max. V 636 l/min * Delivery cylinder diameter: 250mm * Water tank: 610l, roller water pump * Remote control: Schwing Control 30 * Oil cooler * MPS control system Non-binding offer EXW Cologne. Subject to prior sale and errors. Sale to commercial customers only. We speak German - We speak English - Hablamos español - Nous parlons français - Мы говорим по-русски - نحن نتكلم العربية

Condition: used, Year of construction: 2000, Overview This Krones K6W-25-S-E crate washing machine, manufactured in 2000, is designed for the automatic washing and cleaning of beverage crates in returnable bottle lines. The machine is built as a stainless steel industrial crate washer and is suitable for integration into automated crate transport and washing systems. The system includes a stainless steel machine housing, integrated conveyor sections, viewing / inspection windows, electrical control cabinet and operator panel with push-buttons, indicator lights and main switch. The machine is CE-marked and designed for 230 / 400 V AC, 50 Hz operation. Technical Data - Manufacturer: Krones / Krones Zierk GmbH - Model / Type: K6W-25-S-E Nsdpfx Aszb Ad Tsf Sewl - Machine Type: Crate washing machine - Year of Manufacture: 2000 - Application: Washing / cleaning of beverage crates - Construction: Stainless steel machine housing and frame - Conveyor System: Integrated slat-chain conveyor and crate transport sections - Drive System: Electric drive motor with gearbox - Inspection Access: Viewing window with safety latch hooks - Control System: Integrated electrical control cabinet - Operator Panel: Push-buttons, indicator lights and red rotary main switch - Electrical Supply: 230 / 400 V Current Type: AC Frequency: 50 Hz Nominal Current: 24 A

Condition: good (used), Year of construction: 2001, functionality: fully functional, power: 9 kW (12.24 HP), pressing force: 125 t, stroke length: 220 mm, throat depth: 410 mm, total length: 4,200 mm, total width: 2,400 mm, total height: 2,500 mm, overall weight: 10,500 kg, controller manufacturer: CYBELEC, controller model: DNC 800, working width: 3,050 mm, distance between stands: 2,610 mm, control type: CNC control, back gauge adjustment: CNC-controlled, number of axes: 8, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, lower tooling, upper tooling, Hydraulic crowning CN CYBELEC DNC 800 CN axes: Y1/Y2/X1/X2/Z1/Z2/R1/R2 Hydraulic clamping of punches Segmented tooling MACHINE OFF GROUND Specifications Bending length: 3050 mm Power: 125 tons Throat depth: 400 mm Distance between uprights: 2610 mm Ram stroke: 220 mm Nwsdpfx Aswrx Tmof Sel Machine dimensions L x W X H: 4200 x 2400 x 2500 mm Weight: 10500 kg Year: 2001 Main motor power: 9 kW

Condition: used, Year of construction: 2016, machine/vehicle number: PST34, Used BUCHER tube-in-tube flash pasteurizer 12000 L/hTechnical Specifications & Performance DataThis tube-in-tube flash pasteurizer delivers reliable thermal treatment for high-quality beverage production. Manufactured by Bucher Unipektin, model PWAP 12000-S, the unit is designed for continuous, hygienic operation with minimal product degradation. Its robust stainless steel construction and compact skid-mounted layout simplify installation and integration into existing processing or used bottling line environments.Manufacturer: Bucher UnipektinModel: PWAP 12000-SMachine type: Tube-in-tube flash pasteurizerYear: 2016Capacity: 10,000–12,000 l/hHeat exchanger: Tube-in-tube designConstruction: Stainless steel, skid-mounted frameControl: Touchscreen HMI control panelIncluded components: Product feed pump, holding tubeSanitation: CIP-ready configurationPrevious product history: Apple juice / concentrate (non-dairy)Documentation: Full documentation and user manual includedAdvanced Automation & Control SystemsThe integrated touchscreen HMI provides intuitive operation, real-time process visualization, and streamlined recipe management for consistent pasteurization results. Automated control of temperature, product flow, and holding time supports stable performance and product safety. Alarm handling, trend logging, and guided operator prompts help ensure repeatable processes with minimal downtime. The system’s CIP-ready design allows automated cleaning sequences to be managed from the control interface for efficient changeovers and hygiene assurance.Production Line Integration CapabilitiesEngineered for seamless integration in beverage production environments, this flash pasteurizer connects upstream to blending, filtration, and storage tanks, and downstream to fillers and industrial packaging systems. The skid-mounted footprint simplifies placement and utilities hook-up, enabling fast commissioning within second hand or upgraded processing setups. Its continuous operation supports steady flows into downstream filling and labeling equipment, helping maintain overall line efficiency.Machine Condition & Maintenance HistoryThe unit has a documented non-dairy product history processing apple juice and concentrate, contributing to a clean internal condition profile. Supplied with full documentation and user manual to facilitate installation, operation, and maintenance. Presented as a second hand pasteurization system suitable for beverage production environments seeking dependable thermal treatment with compact installation.Operational Performance & VersatilityThe tube-in-tube configuration is well-suited for juices, concentrates, and similar non-dairy beverages where gentle handling and stable heat transfer are critical. The design supports rapid heat-up and controlled holding for effective microbial inactivation while preserving product quality attributes. The CIP-ready construction, sanitary connections, and stainless steel surfaces... Nsdpfx Afez E Dhqj Sjwl

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 150 583, total height: 3,975 mm, ram adjustment: 125 mm, installation height: 410 mm, table height: 1,220 mm, total width: 2,725 mm, total length: 3,510 mm, table length: 1,500 mm, table width: 1,200 mm, pressing force: 200 t, control cabinet height: 2,200 mm, control cabinet length: 340 mm, control cabinet width: 600 mm, type of input current: three-phase, clearance between the columns: 900 mm, distance between side stands: 900 mm, distance between stands: 1,520 mm, overall weight: 3,700 kg, year of last overhaul: 2025, ATTENTION: The machine sustained transport damage. The machine is currently disassembled. Components can be inspected. The machine will be completely mechanically and electrically overhauled/repaired before delivery in 2026/2027. Pressing force: 2000 kN Adjustable stroke: 20 - 160 mm Ram adjustment: 125 mm Stroke rate: 30 - 180/min Center height: 410 mm Table dimensions: 1500 x 1200 mm (The press will be delivered with a new table top; T-slot design can be freely selected) Nwedjw H Arvspfx Af Sjl Ram size: 1500 x 1000 mm Control system: SIEMENS S7 1500 series, PC 477E, year of manufacture 2020.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, overall weight: 1,800 kg, power: 12 kW (16.32 HP), TECHNICAL DETAILS Power: 12 kW Throughput: 1,000 – 2,300 kg/h Weight: 1,800 kg Nwedpezzp T Tofx Af Sol Operating Modes Manual operation Automatic operation EQUIPMENT Screw feeder system in the feed hopper Tool and drum trolley Flexible press belt Adjustable perforated drum Waste chute

Condition: used, Year of construction: 2004, functionality: fully functional, Max turning diam 720mm, max lenght 2,000mm, 12-2,800Rpm, Spindle bore 110mm, XA 660mm, XB 230mm, ZA 2.215mm, Y 250mm, ZB 2,100, B-axis 0.001dg, BT 50 Big Plus, 40-5,000Rpm, Lower turret VDI V12, Tail Stock MT5. Helix and Hobbing function, OSP E100L, Portal loder, weight 28.000kg. Delivery September 2026. Nwedpfx Aezimqxsf Sjl