Used Spanner Hka 30 for sale (25,147)

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop good condition (!!) Knsdpezycpxjfx Ahgob Features: - Electro-hydraulic sheet metal shear ("swing cut") - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left * for positioning the electrically driven backgauge * Target/actual position value input possible * Adjustment via three-phase motor using a toothed belt - Support table with ball bearings * Recessed handles between the table plates - Front finger guard - Hydraulic sheet metal hold-down devices - 1x side stop with mm scale - 2x front support arms with mm scale - 1x freely movable foot switch - Emergency stop button at the front - 1x movable / rear scrap deflector - Original operating instructions Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 3,366 h, load capacity: 3,000 kg, lifting height: 4,900 mm, fuel type: gas, mast type: telescopic, construction height: 3,150 mm, motor manufacturer: VW, fork length: 1,196 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 27 x 10 - 12, rear tire type: superelastic tires (black), rear tire size: 225/75 - 10, overall weight: 4,575 kg, total height: 3,150 mm, total length: 2,700 mm, total width: 1,300 mm, fuel: liquid petroleum gas (LPG), LINDE H 30 T - 02 – LPG forklifts TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 4.900 mm Closed height: 3.150 mm Mast: Standard (2W490) Knodpfx Aez Aqryjhgjb Fork length: 1.196 mm Fork carriage: 3A Drive: 4-Zyl. Treibgas Engine: VW Tyres: Superelastik SE 27 x 10 - 12 (80%) / 225/75 - 10 (25%) Service weight: 4.575 kg Length: 2.700 mm Width: 1.300 mm Year of manufacture: 2013 Operating hours: 3.366 h Condition: ready to drive EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover Internal no.: 1202060 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 1995, turning diameter 510 mm turning length 1000 mm control MAZATROL T PLUS total power requirement 22-26 kW weight of the machine ca. 6,5 t Kjdpfx Ahozyvcrogenb

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,350 kg, maximum load weight: 28,650 kg, overall weight: 33,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,420 mm, loading space height: 1,750 mm, loading space volume: 30 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,400 mm, suspension: air, tire size: 385/65R22,5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Further information Chassis, semi-trailer, tipper Fine-grained steel welded construction, lightweight design, fifth wheel with 2 interchangeable kingpins Curved front panel, patented 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without slide-out compensation 2 support wedges with holder Underrun protection, foldable Half-shell fenders Tarp pole with bracket 2 towing hooks at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Axles in off-road design Air suspension 1st axle, automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake system 2-line compressed air brake system, colored line routing for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Wheels and tires Ksdpfxsi Rizio Ahgonb 385/65 R22.5, manufacturer's choice Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the towing vehicle's display, via EBS, without installation in the truck (this must be available in the truck. Only on the base tires). Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side linked to the turn signal "flashing side marker lights" 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Tippers Aluminum box tipper made of high-quality, abrasion-resistant material, front wall 5 mm thick, with external side walls made of 30 mm hollow chamber profiles, cleanly welded, with a top profile that prevents bulk materials from shifting. Inside with a ladder on the front wall (not in connection with Cramaro). Shovel and broom holder on the outside of the front wall. Greenline - conical and aerodynamic tipper body shape Diaphragm - rear wall Rear wall as a swing gate with double hinge, externally mounted with double hook locking. Rear wall with rubber seal. Note! Heat-resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with ladder, connection plate for air/electricity and brake with large clearance for best possible operation. Roll-up cover on one side to be placed on the right, with central locking on the left Country of registration/Signs Germany with Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paintwork Frame DB 7350 Novagrau "10-year warranty against rust-through" Tipper body RAL optional, solid color Roll-up cover RAL 7035 light g

Condition: used, machine/vehicle number: 296510, Machine: Bortolin Kemo FOC 23/30 Carton erector FOC 23/30 Kedpfez An Rmjx Ahgenb

Condition: ready for operation (used), TRUMPF 200 MQ VIS focusing optic + Haas - Laser NBB 22-30-20-00 SN:9061842, used, normal signs of wear, 100% functional, delivery scope as shown in the photos. Kjdpfjz Adb Uox Ahgenb

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Precision solar simulator for the measurement and calibration of solar cells and modules. Simulates the solar spectrum using a xenon or LED-based flash light source. Uniform irradiation area, automated test procedures, and integrated control via touch panel. Compact, sound-insulated enclosure with safety interlock, signal lamp, and test chamber access via sliding door. Knedpoxzuiaefx Ahgob

Condition: used, Year of construction: 2007, x-travel 760 mm y-travel 510 mm z-travel 610 mm 1.020 x 510 mm WINMAX 12.000 U/min 13,5 kW 24 St. SK 40 | | 20 bar 35/35/30 m/min 5,0 t used vertical machinig centre with 4th axis - 4th axis - Dual toolchanger - internal coolant with filter - spindle oil cooling - electric hand wheel Knedpfx Ahoznnc Tegsb

Condition: used, Year of construction: 2008, Product Information "Nosstec Round Bending Machine" 4-Roll Round Bending Machine with crowning Type / Model Nossebro Luna 8268 30/20 Condition Used Year of Manufacture 2008 Technical Data Maximum working length 3,040 mm Max. sheet thickness (400N/7mm2)(t) 2.0 mm Number of rolls 4-roll system (arranged asymmetrically/symmetrically) Driven rolls All 4 rolls individually driven Roll diameter (top roll) 140 mm Motor power 2.2 kW Power connection 400 V / 3-phase Control voltage 24 V Equipment: CNC control Mylock 100 Features - CNC control with the capacity to store 200 programs in internal memory and virtually unlimited programs by attaching an external USB flash drive - Pre-bending and final bending in one cycle - The pre-bending value is approximately 70% of the specified material. - All four rolls are driven - Crowned rolls - Programmable axis - Designed for highest accuracy - Adjustable crowning of the lower roll Knsdjzp Ip Aopfx Ahgsb - Program backup via external computer or connected USB stick Inquiry item: Transport costs in an individual offer.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,983 h, load capacity: 3,000 kg, lifting height: 4,760 mm, fuel type: electric, mast type: triplex, construction height: 2,270 mm, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,180 mm, tire condition: 30 %, front tire type: superelastic tires (black), front tire size: 23 x 10 - 12, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 5,589 kg, total height: 2,270 mm, total length: 2,500 mm, total width: 1,300 mm, fuel: electricity, Equipment: sideshift, STILL RX 60-30 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 4.760 mm Closed height: 2.270 mm Mast: Triplex (3F476) Fork length: 1.180 mm Fork carriage: 3 A Drive: Elektro 80V Battery: 80 V 620 AH v. 2011 Charger: Dreiphasig 80 V 125 A not tested Tyres: Superelastik SE 23 x 10 - 12 (30%) / 18 x 7 - 8 (40%) Knedpfx Ahjz Apycogob Service weight: 5.589 kg Length: 2.500 mm Width: 1.300 mm Year of manufacture: 2011 Operating hours: 5.983 h Condition: ready to drive EQUIPMENT 3rd valve, Rear work lights, Front work lights, Overhead guard cover, Front windscreen, Heating, Pulse control ATTACHMENTS Sideshift Internal no.: 1309140 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 2021, Load capacity: 4.5t, shaft diameter: 68mm, max. hydraulic pressure: 370bar, rotator flow rate: approx. 25-40l/min, torque: 850Nm, bending moment: 3000Nm. An on-site inspection is possible. Kodoz Da R Eopfx Ahgjnb

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 170.012.100, Brand new Holmatro hydraulic shears. Perfect for auto recyclers, for cutting catalytic converters, etc. The shears are brand new, manufactured in 2024, but have never been used. Ksdpfx Ahszcyrwjgenb Includes a complete service kit.

Condition: used, axle configuration: 3 axles, first registration: 02/1984, color: other, Year of construction: 1984, Empty weight: 6.080 kg Axle 1: left 6 mm right 6 mm Axle 2: left 10 mm right 10mm Kjdpfx Asxu Dlqshgonb Axle 3: left 6 mm right 6 mm We have the possibility to stack trailers!

Condition: used, Year of construction: 2014, operating hours: 36,909 h, machine/vehicle number: TP125, Used Tetra Pak Cap30flex - year 2014Technical Specifications & Performance DataThe Tetra Pak Cap 30 Flex is a robust, second hand capping machine engineered for industrial packaging and beverage production on carton lines. Configured for HeliCap 26 Pro closures and optimized for the Square 1000 format, it supports reliable, continuous operation at high throughput. This used capping machine brings dependable performance to any modern used bottling line or packaging system requiring precise cap application on 1.0L cartons.Manufacturer: Tetra PakModel: Cap 30 FlexProduction speed: up to 9,000 pieces/hourClosure type: HeliCap 26 ProPackage format: Square 1000 (1.0L carton)Container compatibility: CartonCompliance: CE markedApplication: Cap application/capping for carton packagesAdvanced Automation & Control SystemsDesigned with an industrial-grade automation platform, the Cap 30 Flex ensures precise, repeatable capping quality. The system typically features PLC-based control with HMI for recipe selection and format management. Coordinated drives maintain accurate positioning and torque control, while integrated sensors enable cap presence detection and fault handling. Quick-access guarding and guided diagnostics streamline routine checks, and saved recipe parameters reduce human error during changeovers, supporting maximum uptime in beverage production.Production Line Integration CapabilitiesEngineered for seamless integration with Tetra Pak carton fillers and standard conveyor systems, this capping machine fits inline as part of a complete industrial packaging solution. Mechanical and electrical interfaces synchronize with upstream filling and downstream inspection, case packing, and palletizing equipment. The cap feeder and chute are designed to deliver stable, jam-resistant cap supply at high speeds, making it ideal for second hand packaging machinery configurations and used bottling line upgrades.Machine Condition & Maintenance HistoryThe machine is currently disconnected, indicating it has been removed from active production and prepared for relocation and recommissioning. Its CE conformity and recent manufacturing year support reliable performance following standard installation, alignment, and validation procedures commonly applied during start-up of used bottling equipment.Operational Performance & VersatilityConfigured for HeliCap 26 Pro closures on Square 1000 cartons, the Cap 30 Flex delivers consistent application quality aligned with stringent beverage packaging standards. Its precise cap alignment and secure application protect product integrity throughout logistics. The modular design aids layout flexibility and supports continuous operation typical of high-efficiency industrial packaging lines.Installation Requirements & Site PreparationInstallation requires stable flooring, sufficient clearance for the cap feeder and operator access, and standard utilities used by packaging machinery, including electrical power and compressed air. Correct line-height alignment with the filler and conveyors is essential to ensure smoot... Kodpfx Ajzb Iklohgjnb

Condition: excellent (used), For sale is a Weiler C30 x 750 DJ02 lathe from 2008 in very good, well-maintained condition. The machine comes from a training environment and has been used accordingly with care. It is in very good technical and optical condition and has its original paint. Technical data / Equipment: * Manufacturer: WEILER * Model: C30 x 750 DJ02 * Year of construction: 2008 * Type: Conventional lathe * Application: Training / Workshop * Very good, well-maintained condition * Original paint Accessories / Scope of delivery: * New collet quick-change system * 3-jaw chuck * Multifix B quick-change tool holder * Technical documentation Due to its very good condition, the machine is ideal for training companies, workshops, locksmiths, mechanical production, and general workshop use. Inspection possible by arrangement. WORK AREA Center height 165 mm Swinging diameter over bed 330 mm Swinging diameter over cross slide 160 mm Distance between centers 750 mm SPINDLE Knedpfoz Aitpsx Ahgsb Spindle head DIN 55027/DIN ISO 702-3 Size 5 Spindle bore 43 mm Spindle diameter in the front bearing 70 mm MAIN DRIVE Drive power 60 %/100 % ED 9/7 kW Speed range 1 – 4,500 min-1 Number of speeds stepless FEED RANGE Number stepless Longitudinal 0.001 – 10 mm/rev Cross 0.001 – 10 mm/rev Feed force longitudinal 6,000 N Feed force cross 3,000 N Max. rapid traverse speed longitudinal/cross 6/3 m/min THREADING RANGE Metric threads 0.1 – 400 mm Inch threads 56 – 1/4 Gg./inch TAILSTOCK Arbor diameter 50 mm Arbor stroke 110 mm Internal taper DIN 228 MK 3

Condition: used, Year of construction: 2003, functionality: unexamined, machine/vehicle number: AII 298286, overall weight: 585 kg, Speed-controlled screw compressor, Atlas Copco GA 30 VSD FF, with integrated refrigeration dryer, year of manufacture 2003. Serial No. AII 298286, rated power 30 kW, weight 585 kg. Maximum operating pressure 12.75 bar, maximum delivery rate 75 l/s (4.5 m³/min). Control system: Atlas Copco Elektronikon II. Kjdpfx Ahoz A Un Aogjnb Location: Homburg (Saar), Germany. Inspection by appointment only. Price upon request, net plus VAT, ex works; dismantling and loading by arrangement. All information without guarantee.

Condition: used, Year of construction: 2007, color: yellow, For inquiries regarding the vehicle, Mr. Seidel will be happy to assist you (by phone). MAN TGL 8.150 4x2 Aerial Work Platform Body: Bison Palfinger TKA 30, Working height: 30 m, Platform length: 1.62 m, Platform width: 0.82 m, Outreach: 18.4 m, Capacity: 3 persons, Payload: 280 kg, Number of seats: 2, Manual transmission, Engine brake, ABS/ESP/ASR, PTO (power take-off), Halogen headlights, Warning beacons, Hydraulic system, Tyre tread depth: Axle 1: 11 mm, Axle 2: 12-13 mm On request, we are happy to provide you with a leasing or financing offer. Mr. Seidel (by phone) is at your service. Further information can be found on our website. ... Subject to errors, changes, and prior sale! Power steering, ABS, ESP, Crane = Additional information = Mileage: 118,885 km Kjdpfezmct Rex Ahgenb Unladen weight: 7,490 kg Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 1992, bore capacity in steel (diameter) 32 mm throat 320 mm bore stroke 170 mm 4 speeds 60 - 1600 U/min table-size 570 x 480 mm total power requirement 1,6 kW weight 650 kg dimensions 1200 x 800 x 2200 mm Features: - Automatic feed - Coolant device - Infinitely variable speed control - Adjustable fixed depth stop - Machine light Knjdpfovuz T Nox Ahgjb - Drill chuck

Condition: used, Year of construction: 2001, gebraucht 2001 9647 prompt, Zwischenverkauf v Italien 23200 € 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm 40 m/Min 30 m/Min 50 m/Min 30 mm 730 1/Min 300 1/Min 980 mm 4 kW 115 l 4000 mm 2780 mm 1900 mm 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available Ksdpfx Ahswirkgsgsnb WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: good (used), Year of construction: 2015, sheet width 2050 mm plate thickness 3.0 mm distance between columns 2100 mm back stop - adjustable 550 mm no. of strokes 35 Hub/min cutting angle 2°12 table width 400 mm table height 850 mm Control konv. total power requirement 3.0 kW weight of the machine ca. 1280 kg dimensions of the machine ca. 2400 x 1500 x 1300 mm Kedszd Hb Hspfx Ahgsnb Current list price: approx. 20.000 euros From a maintenance workshop Features: - Robust / high-performance electromechanical guillotine shear - Manual material backgauge * Continuously adjustable range * Adjustment from the back via handwheel * Includes mm scale * Max. adjustment range: 550 mm - Manual cutting gap adjustment, from the front - 1x side stop with mm scale - 2x support arms - 1x freely movable foot switch - rear sheet metal chute - rear safety device (light barrier) - operating instructions (machine control system) - Transport stand (homemade)

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Type CX 1000 30 Capacity 30 ton Unloading 1000mm Overwrap up to 10000mm Including drawer cabinet with lots of tooling and multitool Ksdpfx Ajzulx Eehgenb

Condition: good (used), mileage: 906,455 km, power: 341 kW (463.63 HP), first registration: 09/2012, fuel type: diesel, tire size: 445 / 65 / R22.5, axle configuration: 8x6, wheelbase: 6,150 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 16, emission class: euro5, suspension: other, number of seats: 2, total length: 8,760 mm, total width: 2,550 mm, total height: 3,700 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, power mirror, spoiler, trailer coupling, Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Transmission Transmission: ZF, 16 gears, Automatic Axle configuration Make axles: Ginaf Brakes: drum brakes Front axle: Tyre size: 445 / 65 / R22.5; Max. axle load: 10000 kg; Steering; Tyre profile left: 75%; Tyre profile right: 75%; Suspension: leaf suspension Rear axle 1: Tyre size: 445 / 65 / R22.5; Differential lock; Lift axle; Max. axle load: 10000 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40%; Reduction: hub reduction; Suspension: hydraulic suspension Rear axle 2: Tyre size: 13 R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: hub reduction; Suspension: hydraulic suspension Rear axle 3: Tyre size: 13 R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: hub reduction; Suspension: hydraulic suspension Weights Empty weight: 15.815 kg Carrying capacity: 27.185 kg GVW: 43.000 kg Functional Crane: VDL S-30-6600, year of manufacture 2012, behind the cab Interior Interior: grey Condition Technical condition: good Knodpfoz Dr Rwjx Ahgjb Visual appearance: good Number of keys: 2 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Air horn - Armrest - Coupling - Heavy duty engine brake - Hydraulic - Low-noise - Power take-off (PTO) - Radio, MP3 enabled - Radio/CD player - Remote central locking - Reversing camera - Speed limiter - Spoilers - Stability control - Toolbox - Visor

Condition: used, Year of construction: 2012, operating hours: 20,233 h, Used Tetra Pak Cap Applicator 30/Flex for Helicap23 2012 The Tetra Pak Cap Applicator 30/Flex for Helicap23 is a capping machine designed and manufactured by Tetra Pak® in 2012. This machine is specifically designed for applying plastic screw caps onto containers, ensuring secure sealing and efficient production. With a speed of 9600 bottles per hour (BPH), it offers a high-capacity solution for the packaging industry. Specifications: Manufacturer: Tetra Pak® Model: 30 Flex For Helicap 23 Year: 2012 Speed: 9600 BPH This capping machine in suitable for 1000 slim format Cap Type and Rotation Direction: The capping machine is compatible with plastic screw caps, providing a reliable closure mechanism. The rotation direction of the machine is clockwise, ensuring proper application of the caps onto the containers. Current State and Safety Features: Currently, the Tetra Pak Cap Applicator 30/Flex for Helicap23 is in storage. It is equipped with safety features to ensure the well-being of operators and maintain a safe working environment. Manuals and Machine Hours: Accompanying the machine are the necessary manuals, which provide instructions for its operation, maintenance, and troubleshooting. These resources facilitate efficient usage and upkeep of the capping machine. As for its usage history, the machine has been operated for approximately 20,233 hours. Electrical Data: The machine requires an electrical supply of V: 400, kW: 6.7, and operates at a frequency of 60 Hz. These specifications ensure the machine’s optimal performance and power consumption within the specified parameters. Kjdpfxevgufpe Ahgenb Conclusion The Tetra Pak Cap Applicator 30/Flex for Helicap23 is a reliable capping machine manufactured by Tetra Pak® in 2012. With its capability to apply plastic screw caps at a speed of 9600 BPH, it offers a high-capacity solution for efficient packaging processes. Equipped with safety features and accompanied by manuals, this capping machine is designed to provide secure sealing and consistent performance, making it a valuable asset for the packaging industry.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, measuring range X-axis: 2,000 mm, measuring range Y-axis: 3,000 mm, measuring range Z-axis: 1,500 mm, Zeiss Accura II - measuring range 2000x3000x1500 mm - RDS with XXT ( possible additionally LineScan) - C99 - pneumatic damping system - laser safety system installed - compressed air drying system included Kedpfozpzp Nsx Ahgjnb - probe changer, callibration sphere, aluminiumi threaded plate included - latest Calypso basic CNC - installation and callibration included (ILAC possible)

Condition: like new (used), Year of construction: 2022, operating hours: 50 h, EDM 313MF30-SLM, Year of manufacture 2008/2023 Technical data: Adjustment travel XxYxZ 620x420x400mm workpiece clamping table 1000x600mm tank size 1070x670mm Filling height of the working tank 400mm distance table-electrode holder 150/550mm Workpiece weight max.1500 kg Dielectric min. 1200 L dimensions 2550x2430x2500mm Weight of the machine 3900 kg Equipment: - color: aluminum metallic (silver) - new electrical cabinet - lifting speed (highjump) 15m/min. - contact protection new - cooling unit Termogamma TG13/14 Kedpfxjmx Slhs Ahgenb - linear scale in all axes - C-axis 100rpm, direct measurement 0,0001 Holding brake - chuck EROWA ITS/Hirschmann/3R - Cartridge filter system - User interface MF30 V.3.0 - Exopuls+ 60A Rev. 4 - New ball screw, bearings, couplings - Screen Automation Touch Panel - Hand control panel with enable button - Pumps, filling - filter - and spraying pump - New maintenance unit with digital pressure switch - New valve terminal - Table revised (steel) - WZW 6-fold, option 20/30-fold - Co2 extinguishing system - Warranty 12 months - Transport - IB on site - Training