Used Sennebogen 830R-Hdd for sale (89)

Condition: used, For sale is a modular test and measurement system from National Instruments, based on the PXI Express platform. The system was originally purchased in 2016 and subsequently expanded in 2018. The device can be used for test automation, multi-channel data acquisition, quality control, GigE camera support, and communication with industrial devices. Current configuration: National Instruments PXIe-1085 – 18-slot PXI Express 3U chassis with a system throughput of up to 24 GB/s, National Instruments PXIe-8880 – embedded PXI Express controller with a 64-bit Windows 7 operating system, 2 × 8 GB RAM expansion for the PXIe-8880 controller, 6 × National Instruments PXIe-8234 – dual-port GigE Vision modules designed for image acquisition from industrial cameras, National Instruments PXIe-4499 – 16-channel, 24-bit module for sound and vibration measurements, 204.8 kS/s, with IEPE and TEDS support, a complete set of two InfiniBand–BNC cables for the PXIe-4499 module, National Instruments PXIe-4357 – 20-channel, 24-bit temperature measurement module for RTD sensors, National Instruments TB-4357 – terminal block for the PXIe-4357, National Instruments HDD-8261 – 6-disk, high-speed SSD data storage module with a total capacity of 2.9 TB according to the original configuration, National Instruments PXIe-7846R – reconfigurable I/O module with a Kintex-7 160T FPGA, equipped with 8 analog inputs, 8 analog outputs, and 48 digital I/O lines, National Instruments SCB-68A – shielded terminal block, shielded 68-pin terminal block for R Series DIO and HSDIO devices, 2 m SHC68-68-RMIO cable, shielded 2 m R Series High Speed Digital Cable, power cable. Additionally added: NI PXI-6224 M Series Multifunction DAQ – 32 analog inputs and 48 digital I/O lines 12 × NI 8234 Dual Gigabit Ethernet Controller for Windows – a total of 24 Gigabit Ethernet ports NI PXI-8433/2, 2000 V Isolated RS422/485 – isolated, dual-port RS422/RS485 interface Possible applications: - Multi-camera GigE Vision systems - Automated quality control - Testing of electronics and components - Acquisition of analog and digital signals - Communication via Gigabit Ethernet, RS422, and RS485 - Research and development workstations - Automation of production tests Kdodpfx Aozv Idtshbou The devices were purchased as part of a single, complete National Instruments system. Original purchase documentation is available for review. The system was used in research and development activities related to electronics, vision systems, metrology, and automation. Technical and visual condition as shown in the photos. Detailed catalog numbers and serial numbers of individual devices can be provided upon request. Sale of the complete system is preferred. Sale of selected modules is also possible after prior arrangement.

Condition: new, Year of construction: 2026, functionality: fully functional, Alignment press system Push and pull force 24/30 t Hydraulic station Kedeuy N H Espfx Ahbsdu 50 m rod Expander 80/132/160/200 mm Without locator device Price: €27,000.00 net Dry drilling: no bentonite use, no bentonite disposal

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 3,096 h, TERRA-Jet DJ10 Drilling Rig, Horizontal Boring Machine, TERRA Mixing Station, TERRA Locating System Used, from business liquidation Kdedpfxjz H Umge Ahbju Technical data and information according to the manufacturer: TERRA-Jet DJ10 Drilling Rig, Year of manufacture 2021 Operating hours: 3,096 total hours 95 ltr/min (EU Stage 5) Controllable horizontal drilling rig (HDD) Torque: 1,800 Nm, 180 rpm Drilling force: 41.5 kN (4.2 tons) Pull force: 41.5 kN (4.2 tons) Max. drill string speed 180 rpm Hatz diesel engine with 55 kW (75 hp) including particulate filter Emission stage EURO Stage 5 Engine speed only 1850 rpm FMC pump on board Max. flushing volume 95 ltr/min Max. flushing pressure 35 bar TERRA Mixing Station MS700, Year of manufacture 2021 For injecting bentonite into the flushing fluid via an injector (Venturi nozzle) Mixing capacity 700 ltr/min at max. 2.6 bar Fire hose, drill string, probe housing 70 Side loader (DJ10), control plate adapter (DJ10) 3-finger head, tow hitch TERRA Locating System FalconF2+, Year of manufacture 2021 Broadband locating system with FCD monitor Longlife battery ø25/L99 Falcon F2+/F5+ probe (FT2+) L= 381mm, ø32 mm Apart from signs of wear, the TERRA-Jet DJ10 is in a generally good condition, considering its age and use. We recommend an inspection. Information without guarantee. Data, information and technical specifications from the manufacturer. To avoid any misunderstandings regarding the item's condition and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 am - 12:00 pm and 1:00 pm - 4:30 pm. During this time, inspections and collections are possible and desirable AFTER prior appointment. Subject to prior sale, changes, errors and printing errors.

Year of construction: 2008, operating hours: 9,750 h, condition: used, Piling rig RTG RG 25S -Upper carriage : Sennebogen BS 80 R -Engine : CAT C 18 570 kW -Optional : Vibrator MR 125 V, KDK 232 S, DKS 100/ 200 -Additional : Systems Vibrator, Kelly and CFA drilling central lubrication, air compressor , prepration CSM Kodpfxoh Tyz Ae Ahbsdu The machine is in very good working condition!

Condition: used, Year of construction: 2008, operating hours: 13,741 h, 2008 | Delmag RH 18 on Sennebogen SR 25T | Used Drill | 13741 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 244000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 73 inspection points 71 approved ✅ 1 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good operating Drill , with a Good running Cat engine , Kdodpfx Aezd E Irehbou 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40183 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 120,000 km, power: 105 kW (142.76 HP), first registration: 05/2017, fuel type: diesel, overall weight: 3,500 kg, color: yellow, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2017, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Net selling price: €12,900 Mercedes-Benz Sprinter 314 CDI, EURO 6, First owner, walk-through from the cab to the cargo area with shelves Registration: 05/2017 Mileage: 120,000 km MOT: 08/2028 Kedpfx Ahez Sw R Hjbedu Camera Bluetooth Walk-through Shelves First owner Serviced according to maintenance schedule Further equipment/special equipment, see below: Please, no emails, we cannot process them due to time constraints. Thank you for your understanding! Opening hours and further information: Viewings and purchases possible without prior appointment: MON - THU: 9:00 a.m. to 4:00 p.m. FRI: 9:00 a.m. - 1:00 p.m. SAT: 9:00 a.m. - 12:00 p.m. Address: Tabakried 11 84076 Pfeffenhausen For questions: Christian Hirsch For questions: Christian Hirsch Please try again later, as we are often in a customer meeting. Special equipment: Airbag, passenger side, audio system Audio 15 (radio with color display), battery disconnect switch 1-pole, roof control unit with reading spot driver/passenger side, ceiling light in the cargo area, ceiling light in the cargo area with motion detector, generator 180 A, rear door (opening angle 270 degrees), wooden floor in the cargo area, head-shoulder airbag (thorax bag) driver side, parameterizable special module, smoker's package, spare wheel in driving condition, spare wheel holder under frame end incl. jack, reversing camera 138 degrees, seats in the cab: passenger seat as folding seat, stabilizer rear, stabilizer front reinforced, shock absorbers reinforced, step rear door, lining in the cargo/passenger compartment: plastic, fleece battery 95 Ah, intermediate partition cargo area sliding door Further equipment: 3rd brake light, adaptive brake light, airbag driver side, indicator for windshield washer fluid level, exterior mirrors elect. adjustable and heated, both, exterior mirrors with integrated turn signal, brake assistant, brake system with ABS+ASR, roof lining in the cab, glove compartment lockable, body/structure: high-roof van, child lock, fuel tank: main tank 75 liters, cargo area partition, cargo securing/tie-down points, headlight range adjustment, model update, engine 2.1 liters - 105 kW CDI CAT, wheelbase 3665 mm, low emission according to Euro 6 emission standard, sliding door cargo/passenger compartment right, seatbelt system with warning system (driver side), seat cover/upholstery: fabric Lima, steel rims 6.5x16, service interval indicator Assyst, heat protection glazing, permissible total weight 3.50 t The equipment has been determined with the help of a VIN query; technical errors may occur. Information provided on the internet are non-binding descriptions. They do not represent guaranteed characteristics. The seller is not liable for typing and data transmission errors/changes/input errors. Errors and prior sale are subject to change.

Condition: used, Year of construction: 2015, operating hours: 2,766 h, power: 16 kW (21.75 HP), Ride-on Lawn Mower KUBOTA G23-2 HD with High Dump 16.1 kW / 22 HP Includes mid-mount mower deck RCK 48 with 1.22 m cutting width, 640-liter grass collection box with hydraulic high dump ---- * Engine: 898 cm³ 3-cylinder KUBOTA diesel engine, emission stage V, engine output (SAE J1995) 16.1 kW (21.9 HP) * Transmission: HST transmission, load-sensing control, max. speed 19 km/h * Mechanical differential lock * Cruise control * Single pedal operation * PTO shaft drive * Oil-cooled disc brakes * Turf tires front 16 x 7.5-8, rear 24 x 12.00-12 Comfort features: * Fully hydraulic power steering, tilt-adjustable steering wheel * Coolant temperature gauge * Hour meter * Tachometer Ksdjz Nt S Iopfx Ahbodu * Easy Checker * Safety system for mower and drive operation * "Kross-Control" single-lever hydraulic control system for all hydraulic functions * Integrated front tie-down points Mid-mount mower deck: * Rotary mower with 2 blades, shaft drive, electrically actuated magnetic clutch, blade drive via spur gear, hydraulic mower lift, central cutting height adjustment 25-102 mm (13-position rotary knob), blade length 673 mm (1.22 m), ground clearance 150 mm Grass collection box: * Hydraulic emptying, discharge height (HD) 1.97 m, integrated fill level warning indicator, includes front weight bracket and additional front weights * Working width: 1.22 m ----Well-maintained used machine from first owner, good condition - ready for immediate use! Errors and changes excepted!

Year of construction: 2008, operating hours: 9,750 h, condition: used, Field of application: Construction Kjdpfsh Tyzxox Ahbsdu Please contact Mohamad Fattah Ahmad for more information Piling rig Upper carriage : Sennebogen BS 80 R Engine : CAT C 18 570 kW Optional : Vibrator MR 125 V, KDK 232 S, DKS 100/ 200 Additional : Systems Vibrator, Kelly and CFA drilling central lubrication, air compressor , prepration CSM The machine is in very good working condition!

Condition: used, Year of construction: 2019, - Magazine loading system - Clamping table for frame parts - 3 horizontal, longitudinal drilling units from the rear - 4 vertical drilling units from above 1 Drilling machine Manufacturer: KOCH Type: BL 2500 NC select line - used - Year of manufacture: 2019 Workpiece dimensions Workpiece length 150 - 2500 mm Workpiece width 20 - 300 mm Workpiece thickness 10 - 50 mm Material: Solid wood Magazine loading system 1 with workpiece return. Workpiece insertion via 2 parallel-controlled servomotors. The number of workpieces in the magazine depends on the workpiece weight. Manual workpiece insertion Clamping table for frame parts 1 By inserting 3 support segments into the longitudinal drilling units, workpieces can be inserted manually and clamped with clamping cylinders and templates. This also allows for special workpiece dimensions. Work cycle triggering via 2 manual controls on the swappable control panel. 3 horizontal, longitudinal drilling units from the rear Construction width 160 mm Drilling motor 2 kW Longitudinal adjustment (X) with LCD display Vertical adjustment (Z) With dust extraction 4 vertical drilling units from above (supported on one side in a linear guide) Adjustable over the entire working width (X), reading LCD display. Adjustable in working depth (Y), reading LCD display One vertical clamping cylinder mounted directly on the unit Counterpieces for through-holes are available as an option. Drilling motor 1.5 kW at 50 Hz Drilling stroke 50 mm Speed 2,800 rpm Total drill length 70 mm With 4 rotary indexing heads with quick adjustment (for vertical drilling units) with fixed stops at 0 and 90 degrees Positioning control KOCH NUMERIC Basic 1 Positioning control with Beckhoff C6920 industrial PC Intel Celeron 2.2GHz CPU 2.5 320GB HDD 1x RS232, 2x USB, 1x Ethernet available 15-inch touch panel Operating system Windows 7: English User interface in English Input of all machine commands via the touch panel Software is prepared for an online connection. The configuration of the online connection (network) and commissioning are carried out by the customer or their software company. USB port on the PC 4 x Dynamic NC axis (with bearing control) for Z axes Connection data 1 Electrical connection 400 V, 50 Hz, 3 phases Voltage fluctuations max. + 6 % to - 10 % If protected by an RCD (residual current device) on the customer's side, an all-current sensitive (R CCB, Type B) RCD with a rated residual current of /= 300 mA must be used. Air connection 7 bar Kdsdpjzuynhsfx Ahbju Dust extraction air velocity min. 30 m/s Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Year of construction: 2022, condition: used, New: No Field of application: Construction Serial number: 830.0.3303 Kdedpfxjz N Rwbs Ahbou Please contact Christopher Oldenburg for more information

Condition: used, axle configuration: 3 axles, first registration: 06/2022, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Body: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members, 140 mm high, reinforced design for high ground load. Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, made of galvanized steel up to the support structure (semitrailer construction, max. 39,000 kg). Axles and Suspension: Disc brake 22.5". Jost (DCA) axle assemblies, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard information center, electronic brake wear indicator (BWI) readable in the central control unit (CCU) (display), 1st axle with starting aid (new EC regulation, without CCU option). Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, approximately 50-60% tread, on steel rims, silver, 11.75x22.5, offset 120. Kingpin: 2" kingpin bolted into a 10 mm thick plate. Landing Gear: Mechanical landing gear with two speeds, 2x 20 tons support load with pivoting foot. Braking System: According to EC standards, EBS E system Wabco with RSS (Roll Stability Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EC standards 91/633 and 97/28 with 2 five-chamber lights, Aspöck Europoint 3 type, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-shaped protection. Ksdpfez S St Nex Ahbedu Body/Container: Body completely welded on the inside, reinforced side walls. Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum container, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belt. Plank profiles completely welded on the inside. Floor as a sliding floor system laid on 140 mm ALU cross members. Floor load approximately 9 tons/m2. Cross members mounted relatively close together (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3 mm thick, in a straight design. Special ALU corner profiles in a beveled design. Smooth rear wall in a straight design with 2 ALU wing doors, 50/30 mm thick, with 2 swivel rod locks, mounted in a welded ALU rear frame with Teflon and stainless steel bearings. Doors secured in the open position with one chain each on the side. Moving discharge wall with Kevlar cover, approx. 1,800 mm long, plus side Kevlar seal. Hydraulic System: "Cargo - Floor" Sliding Floor System Sliding floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders, plus anti-lifting glide bearings, type CF, 10 mm floor design. Hydraulics with approx. 200 mm working stroke. Fixed stops on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed stops. Line size NW 21. Fixed stops with a size and design to be specified. Operating pressure 190-max. 240 bar. ALU end pieces welded into the sliding floor. Electrical operation at the rear left with remote control integrated in a lockable, waterproof box. Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU wheel chock, side ALU impact protection in a folding design, 1 toolbox approx. 860x460x400 mm in p

Condition: like new (used), Like-new industrial PC for automation, visualization, and SCADA applications. Rugged rack-mount PC with redundant power supply and RAID system. Manufacturer: Siemens Type: Industrial PC Series: SIMATIC IPC647D Article number: 6AG4112-2JP41-0DX6 Condition: Like new Serial number: VPM5954764 Kodozduwcepfx Ahbjdu Supply voltage: 110/230 V AC Power supplies: Redundant RAM: 16 GB DDR3 SDRAM Dual Channel Processor: Intel Core i5-4570TE Processor cores: 4 Mass storage: RAID1 Hard drives: 2 × 1 TB HDD Hot Swap Operating system: Windows 10 IoT Enterprise 2016 LTSB 64 Bit Communication: PROFINET Ethernet interfaces: 2 Ethernet LAN 1 MAC address: D4:F5:27:29:90:32 Ethernet LAN 2 MAC address: 20:87:56:F4:C5:7A Slots: 4 Slot 1: PCIe x16 Slot 2: PCIe x16 Slot 3: PCI Slot 4: PCI USB ports (front): USB 2.0, USB 3.0 Drives: Hot-swap bays (front) Country of manufacture: Germany

Condition: used, Year of construction: 2007, operating hours: 10,250 h, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Upper carriage : Sennebogen BS 100 Kodoh Tyzbjpfx Ahbsdu Under carriage : Bauer UW 130 Engine : CAT C15 / 433 kW Rotary: Bauer KDK 390 S Kelly: BK 40 / 470 Main winch : 30 to Ballast 6+6,5+11,5 to

Year of construction: 2023, condition: used, New: No Field of application: Construction Serial number: 355.0.1489 Kodpfxez Skave Ahbsdu Please contact Christopher Oldenburg for more information

Condition: used, mileage: 177,000 km, power: 105 kW (142.76 HP), first registration: 04/2017, fuel type: diesel, overall weight: 3,500 kg, color: yellow, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2017, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Net selling price: 9,900.- € Mercedes-Benz Sprinter 314 CDI, EURO 6, First owner, walkthrough from the cab to the cargo area with shelving Kedpsztuqhjfx Ahbodu Registration: 04/2017 Mileage: 177,000 km TÜV (technical inspection): 08/2028 Camera Bluetooth Walkthrough Shelving First owner Serviced according to maintenance schedule Further equipment/special equipment see below: Please, no emails - due to time constraints, we cannot process them. Thank you for your understanding! Opening hours and further information: Inspection and purchase possible without prior appointment: MON - THU: 9:00 AM to 4:00 PM FRI: 9:00 AM - 1:00 PM SAT: 9:00 AM - 12:00 PM Address: Tabakried 11 84076 Pfeffenhausen If you have any questions: Christian Hirsch If you have any questions: Christian Hirsch Please try again later, as we are often in a customer consultation. Special equipment: Airbag on passenger side, Audio system Audio 15 (radio with color display), Battery disconnect switch 1-pole, Roof console with reading lamp driver/passenger side, Interior light in the cargo area, Interior light in the cargo area with motion sensor, Generator 180 A, Rear door (opening angle 270 degrees), Wooden floor in the cargo area, Head-shoulder airbag (thorax bag) driver side, Parameterizable special module, Smoker's package, Spare wheel in driving condition, Spare wheel holder under frame end including jack, Rear view camera 138 degrees, Seats in the cab: Passenger seat as a folding seat, Stabilizer rear, Stabilizer front reinforced, Shock absorbers reinforced, Step rear door, Interior paneling in the cargo/passenger compartment: plastic, Fleece battery 95 Ah, Intermediate partition sliding door cargo area Further equipment: 3rd brake light, Adaptive brake light, Airbag driver side, Display for windshield washer fluid level, Exterior mirror elect. adjustable and heated, both, Exterior mirror with integrated turn signal, Brake assist, Brake system with ABS+ASR, Headliner in the cab, Glove compartment lockable, Body/structure: High-roof van, Child safety lock, Fuel tank: Main tank 75 liters, Cargo area partition full height, Load securing/tie-down points, Headlight range adjustment, Model refinement, Engine 2.1 L - 105 kW CDI CAT, Wheelbase 3665 mm, Low emissions according to Euro 6 emission standard, Sliding door cargo/passenger compartment right, Safety belt system with warning system (driver side), Seat cover/upholstery: fabric Lima, Steel rims 6.5x16, Service interval indicator Assyst, Heat protection glazing, Permissible total weight 3.50 t The equipment was determined with the help of a VIN query, technical errors may occur. Information provided on the internet are non-binding descriptions. They do not represent guaranteed characteristics. The seller is not liable for typing and data transmission errors/changes/input errors. Errors/prior sale reserved.

Condition: used, mileage: 115,200 km, power: 174 kW (236.57 HP), first registration: 12/2023, fuel type: diesel, overall weight: 3,100 kg, fuel: diesel, color: black, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 6, Equipment: air conditioning, airbag, central locking, cruise control, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, E07 Hill Start Assist, JA7 Blind Spot Assist, T56 Electric Operation for Left Sliding Door, T55 Electric Operation for Right Sliding Door, EY5 Mercedes-Benz Emergency Call System, EY6 Breakdown Management, G43 9G-TRONIC, CM2 Bumpers and Attachments Painted in Vehicle Colour, FS5 Illuminated Sun Visor Mirrors, JS1 360-Degree Camera, FC1 Electronic Key with Chrome Finish, JK5 Instrument Cluster with Colour Display, LG2 LED Intelligent Light System, LG4 Tail, Brake and Indicator Lights with LED Technology, LG8 High Beam Assist PLUS, RK8 Alloy Wheels 7 J x 17, 20-Spoke Design, SE1 Active Ventilated Front Passenger Seat, SE0 Active Ventilated Driver’s Seat, EZ6 Parking Package with 360-Degree Camera, XO7 Mercedes-Benz Mobilo with DSB and GgD, EZ8 PARKTRONIC, SE5 Lumbar Support Driver’s Seat, SE4 Lumbar Support Front Passenger Seat, T70 Child Safety Locks on Passenger Compartment Doors, ZC6 Sales Identification 1, F2Z Trim Elements in Double Stripe Design, T74 Entry Grab Handle, HH4 THERMOTRONIC Automatic Climate Control, UR1 Quick-Release Seat Rail System, V33 Carpet in Rear Compartment, E1E Digital Extra: HDD Navigation, V36 Roof Lining, E1D Digital Radio (DAB), Y10 First Aid Kit, MJ8 ECO Start-Stop Function, E1F Display Diagonal 26 cm (10.25”), 804 AEJ X3/1, IB6 Model Series C447 Vito/V-Class, SF2 Electrically Adjustable Front Passenger Seat, SF1 Electrically Adjustable Driver’s Seat, HY1 Remote Control for Auxiliary Hot Water Heater, ES3 12V Sockets for Rear Passenger Rows, Left and Right, ES2 12V Socket in Boot / Cargo Area, VD5 Crystal Grey Headliner, E1T Touchpad, H00 Warm Air Duct to Passenger Compartment, ES9 Media Interface Cable Kit, H05 Rear Seat Ventilation, 1st Row, IK3 Luxury Combi, HI1 Cl., You can reach us by phone Monday to Friday until 8:00 PM and Saturday until 4:00 PM! Additional information: Leasing/financing and trade-in possible! Error and prior sale excepted! All information without guarantee ... more on our homepage Kdedpfxoyk Shys Ahbju

Condition: used, Year of construction: 2018, power: 29.5 kW (40.11 HP), overall weight: 2,160 kg, Due to internal restructuring, we are offering the following machine from our inventory for sale: Description: HDD drilling rig Machine type: Grundodrill 4X Serial number: 4X1826295M Year of manufacture: 2018 Weight: 2,160 kg Engine power: 29.5 kW Maximum operating pressure: 310 bar Length: 3,500 mm Kdsdpfxoy Nmffo Ahbsu Width: 1,200 mm Height: 1,710 mm Maintenance and service were recently carried out by TRACTO. The unit is in working condition. Interested parties are welcome to submit their price expectations or make an offer. If you have any questions or require further information, please send us a message or give us a call.

Year of construction: 2005, operating hours: 9,000 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information BAUER BG 28 V Kedpfsh Tyy Esx Ahbodu Year of Man. 2004/5 Base carrier Sennebogen BS 80 Under carriage UW 110 CAT Engine 354 kW Rotary Head KDK 275 S Prepared for Kelly, CFA, FDP & FOW Prepared for BAUEr oscillator

Condition: used, Used industrial process computer in a fanless aluminum housing for automation, laser, and manufacturing applications. Robust design with numerous interfaces for continuous industrial operation. Manufacturer: Scansonic Model: NISE3500P2 Device type: Process computer Condition: used Power supply: 9–30 V DC Ksdpfxjzdnilo Ahbsdu Input current: 13.3 A – 4 A Power supply input: 100–240 V AC Mains frequency: 50–60 Hz Fanless aluminum housing 2 x Gigabit Ethernet RJ45 4 x USB ports VGA port DVI-I port Serial interfaces COM1–COM4 Optional video port Audio input and output CompactFlash slot Status indicators for power, HDD, link, and activity Computer model designation: NISE3500P2 System identification: Process computer TH6D-CF Date of manufacture: 2020/03 Location: Kusel Quantity: 2 units available

Condition: used, SIMATIC Panel PC 677 (DC) 12" Key For Weinig Unicontrol Order No. 6AV7801-0AA00-1ACO Serial No. SVPU9007218 PANEL 12" KEY 677/877 Mainboard CV3 with Profibus Cel M370 1.5GHz 400MHz 1MB SLC 256 MByte DDR2 533 SODIMM 40 GByte HDD SATA + DVD-ROM Windows XP Prof. MUI SP2 / 677 Kodoxytnrspfx Ahbsdu

Condition: used, mileage: 287,000 km, power: 355 kW (482.67 HP), first registration: 09/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, DAF XF480 AT-Boretec HS2, approx. 1,900 operating hours, well-maintained, last service at 1,760 operating hours. The HS2 system truck is a bentonite mixing and recycling system designed for use in complex drilling projects. With its 45 kVA generator, the HS2 provides a powerful and reliable solution. The system is equipped with ten cyclones and three centrifugal pumps, each rated at 7.5 kW, ensuring efficient processing and transfer of drilling fluids. The shaker features three dual-deck flatscreens with six screens in total, allowing for thorough screening and cleaning. The total tank capacity is 12,000 liters, divided into three tanks, providing ample capacity for drilling fluids. Additionally, the HS2 includes a 1,100-liter fresh water tank. The HS2 system truck is integrated in a BDF container construction, offering maximum flexibility and mobility for operations at various sites. It also comes with a tank capacity increased by 4,000 liters, resulting in a total of 12,000 liters. Construction Description: SYSTEMTRUCK HS2 The most proven all-rounder with a total tank volume of 12m³ (5 + 5 + 2), sold over 200 times since 2015 and continuously improved for ongoing successful operation. Optimally designed for drilling rigs in the 15–25 t performance class. The three KSB centrifugal pumps, each with a flow rate of 1,100 l/min (7.5 kW), are powered by an underfloor-installed 50 kVA generator. Max. cleaning performance of up to 150 m³/day or 15 m³/h Centrifuge option: For drilling rigs with small, high-pressure bentonite quick-runner pumps to significantly increase service life; 10 hydrocyclones to separate fine solids: 2.2 bar. Mixing and recycling system in an ISO container frame Also usable as a full-fledged permanent mixing plant with 2 × 5 m³ working tanks. Empty weight, depending on chassis and due to high-quality lightweight construction, is approx. 17 t Mounted on a 3-axle, 26 t chassis Kedpfx Aez Hd Exjhbedu 3 dual-deck flatscreen shakers with 6 screens for removal of coarse solids 1,100 l fresh water tank capacity TECHNICAL DATA: SYSTEMTRUCK HS2 CARRIER VEHICLE: Permissible gross vehicle weight: 26 t BDF CONTAINER L x W x H (mm): 7,450 x 2,550 x 2,950 Total weight (incl. truck): 17,000 kg TANK SYSTEM: Total tank volume: 12,000 l Tank 1: 5,000 l Tank 2: 5,000 l Tank 3: 2,000 l Fresh water tank volume: 1,100 l RECYCLING SYSTEM Shaker: 3 dual-deck flatscreen units Total number of screens: 6 Shaker inclination adjustment: manual (hydraulic) Number of hydrocyclones: 10 (4?) Number of centrifugal pumps: 3 Centrifugal pump rating: 7.5 kW Centrifuge: 1 Number of agitators: 3 Agitator power (Tank 1): 1.5 kW Agitator power (Tank 2): 1.5 kW Agitator power (Tank 3): 0.9 kW Cleaning capacity: up to 150 m³/day GENERATOR Generator output: 50 kVA Emission standard: Stage V Installation: Underfloor AT-Boretec HS2 HS2 Bentonite Mixing and Recycling System, year of manufacture 2022 DAF truck first registration: 2019 Truck with AT-Boretec HS2 with registration as a self-propelled work machine. Bentonite mixing and recycling systems – The use of the HDD system truck provides the following advantages: * Significant savings on fresh water and bentonite * Cost savings on bentonite disposal due to recycling * Substantial reduction in drilling downtime by eliminating waiting times for water refueling, mixing, and disposal * Strong reduction in ...

Year of construction: 2010, operating hours: 13,500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information ABI TM 14/17 V Year 2010 CAT Engine / 470 kW Base carrier : Sennebogen SR 35 T Aux Winch Vibrator MRZV 24VV Kdjdpjh Tyyljfx Ahbou Pre drilling rotary available Good working condition!

Year of construction: 2009, operating hours: 19,800 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Engine CAT C9 / 261 kW Base Carrier Sennebogen SR 48 BT Crowd winch pull 420 kN Main winch 250 kN Kjdpfxeh Tyz Rj Ahbsdu Aux winch 75 kN Operating weight 90 t Transport weight 76,5 t Rotary Head BT 320 (320 kNm) Kelly 419 / 3 / 32 m

Year of construction: 2009, operating hours: 500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Kdjdpfx Ash Tyyhjhbou Base carrier: Sennebogen BS 80 R Under carriage: BAUER UW 95 R Engine: CAT C 18 with 570 kW (no AdBlue nocessary) Available applications: Kelly rotary head KDK 235 S / double head rotary DKS 100/ 200 -02 / Vibrator MR 125 V This machine got only 500 running hours and is like NEW !!!

Year of construction: 2013, operating hours: 7,550 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Base Carrier Sennebogen BS 95 Under Carriage Bauer UW 130 Engine CAT C15 with 433 kW Rotary KDK 390 S Working Hours 7.550Hrs Kelly Bar available in different lengths Big Single layer winch 3m mast extension Kdodpfsh Tyy Tsx Ahbeu Prepared for oscillator and BTM drilling Good working condition!