Used Scm Planers/Moulding Machines for sale (66,165)

Condition: good (used), Year of construction: 2007, SCM Compact XL four-side planer - Italian production - year of production 2007 TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm 1) horizontal, lower 230 mm 5.5 kW 2) vertical right 130 mm 3) vertical left 130 mm (2nd and 3rd spindle) 11 kW 4) horizontal, top 230 mm 7.5 kW Hodpfx Aehrdmisitenu all spindles up / down, right / left spindle diameter 40 mm from the top 3 introducing rollers, metal, torsion, including 2 double top pulling roller, double rubber pressure 1 pc on the side a rubber pulling roller in the lower table top feed on cardan shafts pneumatic clamps smooth regulation of the feed speed 5-22 m / min 1.1 kW feed motor electric setting of the planing thickness 0.37 kW lifting motor the length of the introducing table top 2470 mm locked in the cabin central lubrication of the table top diameter of the extraction nozzle 150 and 180 mm dimensions (length / width / height) 3650/1200/1600 mm weight approx. 1500 kg

Condition: used, Year of construction: 2016, operating hours: 26,000 h, clamping force: 850 kN, displacement volume: 679 cm³, injection pressure: 2,000 bar, overall weight: 55,000 kg, screw conveyor diameter: 95 mm, terms of delivery: EXW (ex Works) Hsdpfsz S N Rfsx Aitjnu delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), Catalog number: 8124 TECHNICAL DATA - Shaft width: 510mm - 4-knife shaft - Max. thickness of workpiece on thicknesser: 200mm - Max. thickness of workpiece on side heads (3-sided): 100mm - Top: - Pawls - Toothed infeed shaft - Pressure roller - Planing shaft - Smooth outfeed shaft - Bottom: - Guide strip - Adjustable rollers in the lower table, 2 pcs - Rear: - Side spindles + pressure roller, 2 pcs - Spindle height: 100mm - Spindle diameter: 30mm - Adjustable spindles (left/right) - Side spindle motors: 2 x approx. 1.5kW - Main motor: 7.5kW - 2 types of feed speed - Dust extraction port: 2 x 100mm, 1 x 120mm - Overall dimensions (L/W/H): 1700x1300x1160mm - Weight: 1103kg ADVANTAGES Hnodpsz Rpkcjfx Aitou - Polish-made - Shaft with 4 knives - Used planer, very good condition Net price: 14900 PLN Net price: 3470 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2003, functionality: fully functional, planing width: 230 mm, working height: 100 mm, Planer Moulder P 1000 UNIMAT STAR with 6 Tool Holders Hnsdpfx Aoxyu Iteitsu

Condition: new, Year of construction: 2025, Jointer-Thicknesser minimax fs 41es TERSA Maximum configuration for the professional user. Article number 5503431 Brand Hjdpfxolht Htj Aitonu Holzkraft / SCM Helically toothed steel infeed roller for consistent and uniform material feed, enabling chip removal starting from 0.2 mm (with a minimum workpiece thickness of 3 mm) – ideal for economical planing of precious woods. Models with a TERSA cutterblock for seconds-fast planer blade changes and particularly quiet operation. Material feed with two speeds. Particularly long jointer tables enable easy and precise jointing of workpieces. Work tables made of grey cast iron, annealed and stress-free, making them insensitive and permanently flat. Tables that open simultaneously towards the rear for short setup times. Thickness table adjustment via handwheel with numerical display for planing height. High machine weight for maximum precision and smooth operation. Powerful industrial motor. Robust steel/grey cast iron construction. Quality – Made in Italy. TECHNICAL DATA Dimensions and Weights Length (product) approx. 2200 mm, Net weight approx. 450 kg Width/Depth (product) approx. 1160 mm Jointer Total length of tables 2200 mm, Jointer fence length 1200 mm Working height 905 mm, Jointer fence height 150 mm Chip removal max. jointer 5 mm Connection for dust extraction Dust extraction nozzle diameter thickness 1 x 120 mm Thicknesser Thickness table length 775 mm, Working height thickness max. 240 mm Thickness table width 410 mm, Chip removal max. thickness 5 mm Working height thickness min. 3 mm Electrical Data Power drive motor 5 kW, Mains frequency 50 Hz Connection voltage 400 V Planer cutterblock Planer cutterblock type TERSA, Planer cutterblock speed 5000 min⁻¹ Planer cutterblock diameter 95 mm, Planing width max. 410 mm Number of planer blades 4 pcs Feed Feed speed 6 / 12 m/min SCOPE OF DELIVERY Jointer fence with round bar guide & auxiliary fence Two feed speeds Tersa cutterblock Location: In stock, 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2013, total width: 1,650 mm, total height: 1,750 mm, Colour: White Empty weight: 2.600 kg Hjdpfx Aezwuh Ieitonu Dimensions (LxBxH): 415 x 165 x 175 cm Price: On request - Year: 2013 - Documentation available: Yes - └ Type Documentation: Operating system, Technical data, User manual - CE marking present: Yes - CE certificate present: No - Serial number: AB - 216795 - Number of spindles [pcs.]: 5 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 9 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 180 - └ Spindle 5: - - Spindle type: Bottom - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 140 - Min. planing width [mm]: 25 - Max. planing width [mm]: 230 - Min. planing height [mm]: 6 - Max. planing height [mm]: 120 - Feed table length [mm]: 2470 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 3 - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 120 - Options: Powered rollers in table - Feed speed: Automatic - └ Min. feed speed [m/min]: 5 - └ Max. feed speed [m/min]: 25 - └ Feed speed control: Variable - Voltage [V]: 400 - Current consumption [A]: 57 - Fuse [A]: 63 - Power [kW]: 10.0 - Transport dimensions: 4150mm x 1650mm x 1750mm (l x w x h) - Transport weight [kg]: 2600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1996, functionality: fully functional, High-performance planing and profiling machines / four-sided planer Manufacturer: Weinig Model: Hydromat 30 / H 30 N System originates from a parquet factory Planing width: approx. 220 mm Planing height: approx. 120 mm Hnedez D Exbjpfx Aitju Spindle arrangement: Bottom (joiner), 22 kW Right, 7.5 kW Left, 18 kW Top, 30 kW Spindle diameter: 50 mm Feed speed adjustable, 12 – 120 m/min. Voltage: 380 V, 50 Hz

Condition: used, Thickness planer: Max planing width: 400 mm Max planing height: 240 mm Min length of planed workpiece: 200 mm Cutter shaft diameter: 700 mm Number of knives: 3 Cutter shaft speed: 5000 rpm Manual adjustment of working height Jointer: Total table length: 1810 mm Adjustable tables Cutter shaft noise suppression Hedpexwvqdsfx Aitjnu Cutter shaft guard Extraction port: 2x120 mm Tilting fence Supply voltage: 400 V Motor power: 5 kW Overall dimensions: Length: 2030 mm Width: 800 mm Height: 1160 mm

Condition: used, Wittmann Battenfeld 3 Vertical V 800/315 injection molding machines for thermoplastics Type: Vertical V 800/315 Design: Vertical Control system: Battenfeld UNILOG B4 Clamping force: 800 kN Injection unit: 315 Screw diameter: 40 mm Calculated displacement volume: 201 cm³ Maximum shot weight: approx. 183 g Specific injection pressure: 1,575 bar Hjdpfxszpwrgj Aitenu Clear tie bar distance: 370 x 420 mm Minimum mold height: 200 mm Maximum opening stroke: 300 mm Machine weight: 3 x approx. 5,500 kg Machine dimensions: approx. 2,917 x 1,423 x 3,643 mm Documentation and technical documents available Condition: used Disassembly and collection must be carried out by the buyer. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2007, CNC machining center Manufacturer: SCM Type: Morbidelli Author X5 EVO 440 Year of manufacture: 2007 Technical data - Working area: 1350 x 4400 mm - Equipped with a milling spindle, drilling unit, and saw - Horizontal machining units Hodpjz Iv Nrefx Aitenu - Original SCM software - The machine is in good working order. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: SCM Type: Olimpic K360 T-ER1 Hnedjzuyk Nspfx Aitou Year of manufacture: 2017 Technical data - Feed speed: 11 m/min - Edge thickness: 0.4 - 6 mm - Control: SCM control panel with display - Board thickness: 8 - 60 mm - Power supply: 400 V / 3~ / 50 Hz, 23 A - Min. workpiece: 140 x 90 mm Units Pre-milling - 2 counter-rotating diamond heads (up to 3 mm removal) EVA gluing unit Pressure zone with driven roller + 2 pressure rollers End trimming unit K-2 (straight / beveled, automatic switching) Flush trimming - flush, radius, chamfer Corner rounding R1/R2 Profile + surface scraper blade Polishing unit Anti-adhesive liquid system (2 liquids), edge roller feed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 1996, condition: used, There are two Arburg ALLROUNDER 220S 250-60 available, connected load: 39kW, an on-site inspection is possible. Hnodpfxjz Sr Rbs Aitju

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Hedpfx Aieg Ailcstsnu Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: good (used), Year of construction: 1989, functionality: unexamined, working width: 220 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 120 mm, overall weight: 7,500 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 10, power: 105 kW (142.76 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Hydromat 22 B With grooved bed 10 spindles, Working width: 220 mm, Hodpfxsu Udd Ss Aitjnu working height: 120 mm, spindle diameter: 50 mm, Feed rate: 7.5 kW / 8- 40 m/min, Spindle arrangement: 1-bottom (7.5 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-Left (11 kW) 4-Right (7.5 kW)- with straight jointer 5-Left (7.5 kW) 6-Top (15 kW) - with hydraulic clamping 7-Bottom (7.5 kW) - with hydraulic clamping 8-Top (7.5 kW) - with hydraulic clamping and straight jointer 9-bottom (7.5 kW) - with hydraulic clamping and straight jointer 10-Uni (7.5) 6 driven rollers in the table

Year of construction: 1995, condition: good (used), 3 drilling heads with 21 spindles each 1 horizontal 21 spindles 2 vertical 21 spindles pneumatic clamps Hnodpfx Aieih H Epeteu

Year of construction: 2019, condition: used, Rated current: 53A, connected load: 29kW, an on-site inspection is possible. Hnjdpfx Aioz S Iuvjteu

Condition: new, spindle moulder with tillable spindle guaranteed quality at your finger tips - easy-to-use the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine. spindle speed readout via LED's left right turning of spindle spindle moulder fence with manual adjustment machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button carriage on work table for tenoning works incl. fence and work piece clamp incl. feeder unit STEFF 2048 4 rollers 8 speeds work table dimensions 1200 (2500) x 855 mm spindle DM 30 mm usable spindle lenght 125 mm max. tool DM under table 240 x 80 mm suction connection DM 2 x 120 mm motor 5,5 kW INcL. OPTIONS: Hsdpfx Ascuwptoitjnu version 'LL' with long cast iron tables (2500 mm) & pull out work piece support in front fence with hand wheel adjustment and numerical read out machine dimensions L x B x H = 2500 x 855 x 900 weight approx. 500 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 1995, operating hours: 1,234 h, functionality: fully functional, 1 GUBISCH - window production line type CENTROMAT-CD-SUPER (output 3 - 4 parts per minute. Number of units to be produced in 8 hours, approx: 200 pieces) with the following machine components: 2 cross-cut saws > 2 cross-cut saws electronically controlled: yes > Number of tools: 1 piece > Spindle speed: 3000 rpm > Tool diameter max.: 350 mm > Motor power: 3 kW 2 left and 2 right vertical slot spindles > Number of tools: 3 pieces > Spindle stroke: 3x100 mm > Spindle speed: 4200 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Tool diameter max.: 320 mm Hsdsv A It Sjpfx Aitonu > Motor power: 11 kW 3 profiling spindles vertical right > Number of tools: 3 pieces > Vertical spindle stroke: 3x100 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Max. tool diameter: 230 mm > Motor power: 9.2 kW 3 Profiling spindle vertical left > Number of tools: 3 pcs. > Vertical spindle stroke: 3x100 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Max. tool diameter: 230 mm > Motor power: 9.2 kW Other features: > Online capable: yes > Double parts package: yes > Screen control: yes Detailed description on request.

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Hodpfxjwm Iy Eo Aitsnu Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: used, Year of construction: 2005, Technical specifications: - Machining area: 2500x1000 mm - Travel range X-axis: 2980 mm - Travel range Y-axis: 1280 mm - Travel range Z-axis: 200 mm - Programmable speed in the X-axis: 25 m/min - Programmable speed in the Y-axis: 30 m/min - Programmable speed in the Z-axis: 22.5 m/min Hodpfxszuxhte Aitenu - Vector speed: 40 m/min - 16 spindles, 4000 rpm, 2.2 kW (10 vertical and 6 horizontal) - Electric spindle with 6.6 kW, 12000 - 18000 rpm, HSK-63 - Side tool magazine with 7 positions - Footprint (L x W x H): 6970x3000x2680 mm - Weight approx. 3295 kg

Year of construction: 1994, condition: used, Clamping force: 500kN, heating power: 4.2kW, connected load: 19.2kW, weight: 2.2t, an on-site inspection is possible. Hnsdpjz S Iu Aofx Aitou

Condition: ready for operation (used), Year of construction: 2010, operating hours: 43,000 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 80 mm, Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1510 x 1370 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 95 / 48 kN Injection unit: Screw diameter 80 mm Ls/D ratio 22,5 Injection pressure 2205 bar Stroke volume 1810 ccm Hnjdpfxjz N E Eyo Aiteu Shot weight (PS) 1647 gr. Injection rate 498 ccm/s Screw speed 195 1/min Plasticising rate max. 106 g/s Nozzle pressure 129 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 8,50 x 3,00 x 2,70 m Total machine weight 35000 kg Accessories: - Anti vibration pads - 10-fold water regulator - Krauss Maffei Robot LRX250 X: 900 mm Servo Y: 1000/1000 mm Servo Z: 3500 mm Servo C: 0 - 90 ° Additional Options: - 2 x core pulls on movable plate - 2 x core pulls on fix plate - Robot interface according to Euromap 67 - 6 x hydraulic sequentional valves - 12 x hotrunner controller - 1 x Air valve

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 106531, working width: 230 mm, power: 75 kW (101.97 HP), input current: 163 A, table width: 230 mm, Equipment: cabin, Rarity! Four-side planer Weinig Powermat 500 with splitting unit!! (the last two spindles fitted with saw blades, anti-kickback device, splitter wedge) for sale complete with all accessories. The machine has 7 spindles/shafts (bottom / right / left / top / bottom / right / left). We used the line to produce middle layers for three-layer board manufacturing. The machine is in perfect working order. Hsdpeyyw Ufefx Aitenu The machine is still in operation and can be demonstrated. Further technical details will follow in the next few days...

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, clamping force: 805 kN, screw diameter: 42 mm, injection weight: 172 g, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this high precision BOY 80M injection moulding machine. The BOY 80 is one of the most compact 80t clamp machines around, a great allrounder, fitted with the Procan 2 controller and 42mm diameter screw, which gives a shot weight of 179 (PS)g. Hnedpfxewfpqco Aitou Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: used, Year of construction: 1988, Slot drilling machine Manufacturer: SCM Type: AS 16 Year of manufacture: approx. 1988 Hjdjzuynuopfx Aitonu