Used Scantech Digital Gmbh Trackscan Sharp49 for sale (71,267)

Condition: used, Year of construction: 1985, Pressurised tank cellar with three upright stainless steel pressure tanks of 207 hl each and with double-seat valve solution on the operating level. All tanks can be cooled. Additional title: 3 pressure tanks Volume per tank: 20700 l Effective cooling surface: 18 m² Max. working overpressure inner tank: 4 bar Cedpow Tmqnefx Akcegt Length: 2,10 m Width: 2,10 m Height: 6,66 m Weight: 1985 kg Material: stainless steel AISI 304 Features: Tank cleaning equipment with spray head, safety valve, pressure gauge, air valve combination; sampler, level indicator with valves, outlet valve, Printed tank books and drawings available Periphery: Inlet & outlet pipework via double-seat valves

Year of construction: 2003, condition: used, Additional title: stainless steel brew vessel Total volume: 300 hl Cjdpsxbn E Iofx Akcsgt Area approx.: 15 m² Specific false bottom load: 165 kg/m² Frame height: 2 m Material: Stainless steel Features: Outlet vent bracket, entrance dome (DN600), inspection glas (DN600), CIP warning light, door safety switch, interior lighting set (IP54)

Year of construction: 2013, condition: used, Additional title: trub removal Capacity: 182 hl Volume net: 150 hl Cgsdpfx Aoxbn S Iokcjt Volume gross: 182 hl Material: 1.4301 Position: outdoor Features: insulation (100 mm mineral wool)

Condition: used, Year of construction: 1974, Combination Kieselguhr and Sheet filter. Stationary sheet filter with square filter elements in vertical row arrangement. Capacity: 60 hl/h No. of plates - KG Filter: 34 Plates No. of frames - KG Filter: 35 filter frames No. of plates - sheet filter: 150 Plates Length: 6500 mm Width: 1000 mm Height: 1500 mm Formats: Quadratic filter elements - 60 cm x 60 cm Base construction: Frame Csdpfxsxbpdlo Akcsgt Features: Manual filter element compression Periphery: Kieselguhr dosing unit with dosing pump Layer patterns: Vertical filter elements in a row

Year of construction: 2007, condition: used, Additional title: Residual liquid, bottom, mouth, sidewall control Capacity: 32000 bottles/h Power: 3,6 kW Voltage: 400 V Frequency: 50/60 Hz Compressed air: min. 6 - max. 10 bar Length: 2,5 m Cedpfx Aksxbpg Hecsgt Width: 1 m Height: 2,5 m Weight: 1700 kg Formats: Longneck-, Steini-, Vichy- 0,33 l bottles / 0,5 Longneck-, NRW- 0,5 l bottles Running direction: right-left Operation / Control: Heuft Features: residual liquid, bottom, body, mouth, side wall

Condition: used, Year of construction: 1985, Beer drive transport tank built into trolley, with CIP spray head and manhole. Includes measuring system (max. flow: 120 l/min). Cedpfx Ajxbqhxokcegt Additional title: horizontal tank in container Capacity: 7200 l Operating pressure: 2 bar Operating temperature: 20 °C Length: 7,25 m Width: 2,4 m Height: 2 m Features: control, pump, hose reel, flow meter, cable drum, fittings, CIP spray head, manhole

Condition: used, Year of construction: 2011, Additional title: Booster station with chemical dosing pumps Codpfxjxbqpie Akcegt Position: standing on frame with protective screen Features: Centrifugal pump (Grundfos), 1 pressure sensor, 4 diaphragm metering pumps with PVDF dosing head and microprocessor control, 4 Flow Control PVDF for diaphragm dosing pump, 4 impinges, inductive flow meter (Endress + Hauser)

Year of construction: 1979, condition: used, Combination Kieselguhr and Sheet filter. Stationary sheet filter with square filter elements in vertical row arrangement. Hydraulic filter layer compression. Control of hydraulics from built-in electrical panel. Additional title: Kieselguhr and sheet filters as a combination design; years of construction 1979 Capacity approx.: 380 hl/h Combination filter - filtration area approx. 76 - 108m2 KG; 18m2 Sheet with beer filtration Operating pressure: 8 bar Power: 6 kW Voltage: 220/380 V Frequency: 50 Hz Cgedpfjvcqn Ssx Akcot Length: 10100 mm Width: 1320 mm Height: 1750 mm Formats: Square filter elements Operation / Control: Built-in control panel Material: Stainless steel Position: Horizontal Base construction: Frame Features: Filter plates; Filter frames; collection tray with removal screw; hydraulik filter plate compression; hose pump Layer patterns: Vertical row arrangement

Year of construction: 1975, condition: used, Filter system constructed with horizontally stacked filter elements. Once filtration is completed the kieselguhr is expelled from the vessel by centrifugal force. Capacity: 140 hl/h Vessel volume: 26 hl Length: approx. 4000 mm Cedpfx Asvcqpcokcsgt Width: approx. 2000 mm Height: approx. 3500 mm Material: Stainless steel1.4541 (vessel) Base construction: on feet Features: Kieselguhr dosing vessel with dosing pump; pumps; fittings, measurement technology

Condition: used, Year of construction: 2006, Semi-automatic 5l Party Keg filling line, including 6-headed filler, capper, transport conveyors, washer and turner. Additional title: semi-automatic Capacity: 240 cph Power: 0.3 kW Current: 1,85 A Voltage: 400 V Frequency: 50 Hz Compressed air: 3.2 cbm/h at 6 bar Length: 5000 mm Width: 3000 mm Height: 2300 mm Operation / Control: SPS S7-200 Features: Single-point, semi-automatic canner Transport unit washer and turner Csdpfx Aksvcqpiocogt

Condition: used, Year of construction: 1991, consisting of: -SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m2) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reduction station -Control cabinet with operating panel Additional title: juice heating plant for pasteurization Cjdpevcqy Uofx Akcogt Capacity: 100 hl/h Perm. working overpressure: 16 bar test pressure 20,8 bar Wärmeaustauschfläche: 21 m2 Length: 5,6 m Width: 2 m Height: 2,4 m Operation / Control: Control cabinet with operating buttons Material: Stainless steel Base construction: Frame Features: 2 x vessels; plate heat exchanger; pipe heat exchanger; 2 x product pumps; process measuring and control technology. various valves and other fittings

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 400 mm, total height: 690 mm, total length: 600 mm, overall weight: 45 kg, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, space requirement height: 900 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, laser type: fiber laser, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge - Fiber laser 30 Watt (Optional: 20 Watt, 50 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm Cgodpfx Akjy I Nbmjcot - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: new, Year of construction: 2025, functionality: fully functional, rapid traverse Y-axis: 20 m/min, spindle speed (max.): 60,000 rpm, mount diameter: 3 mm, total width: 800 mm, type of input current: AC, table length: 320 mm, table height: 560 mm, warranty duration: 12 months, working width: 560 mm, ambient temperature (min.): 18 °C, ambient temperature (max.): 30 °C, compressed air connection: 6 bar, working length: 320 mm, number of axes: 3, The compact tabletop version LOW MINI has been specifically developed for depaneling small-format production panels, small series of larger format, and cost-conscious manufacturing. PCB materials with breakout tabs can be separated quickly and economically up to a maximum size of 320 mm x 560 mm. The separation process is servo-controlled on all axes, with the milling drive operating from above. The machine’s highlight is its easy and straightforward switch between small (320 x 280 mm) and large (320 x 560 mm) working areas. • Short cycle times due to shuttle operation • X/Y axes with linear motor technology • Panel fixation using pin technique • Flexible handling • Suitable for PCBs with breakout tabs • Milling spindle adjustment with servo-drive technology • Extraction device • User-friendly operation • Excellent price-performance ratio Manual Depaneling – flexible and cost-effective Cgjdpfoxmfdxjx Akcjt The concept of manual depaneling offers significant advantages when it comes to flexibility and cost-effectiveness. Medium production volumes can be separated quickly and with minimal dust using the LOW MINI. Standard equipment includes dual loading with linear motor technology, while single-shuttle operation is available to expand the working area. Ease of maintenance and user-friendly operation, combined with its outstanding price-performance ratio, ensure convenient operation and make investing in this depaneling machine a worthwhile choice. Axis speed: 160 mm/s Repeatability: 0.02 mm Separation accuracy: 0.1 mm Shank tool diameter: 0.8 – 2.4 mm

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 350 mm, total width: 605 mm, total height: 1,080 mm, input voltage: 230 V, laser power: 20 W, laser wavelength: 1,064 nm, scan area length: 70 mm, scan area width: 70 mm, type of input current: AC, laser type: fiber laser, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional: 30 Watt, 50 Watt) - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status Csdpfx Akou Smcbjcegt - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - Fiber optic cable approx. 2,50 m - Extraction optional

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 1,500 mm, total height: 2,050 mm, total length: 900 mm, overall weight: 120 kg, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 Watt, 20 Watt or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled Cgodsrxrrhspfx Akcot - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: excellent (used), Year of construction: 2016, We offer here a used rotary indexing table of the brand Weiss. The turntable has a load capacity of approx. 30 tons and a diameter of approx. 3.5m as well as a dead weight with motor of approx. 6500Kg. The control of the turntable is also available, with SEW frequency converter, braking resistor etc.. Cgedpfxeni Awpj Akcjt All documentation is available.

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) Cgedpfxexwvruo Akcst - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: new, functionality: fully functional, power: 14 kW (19.03 HP), gearing type: automatic, fuel type: diesel, color: orange, operation weight: 2,500 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.07 m³, Year of construction: 2025, operating hours: 20 h, Equipment: adjustable boom, adjustable chassis, air conditioning, cabin, hydraulics, parking heater, quick-change device, steel tracks, SPECIAL PRICE – CLEARANCE SALE – ONLY 2 UNITS AVAILABLE! HT25 PRO Mini Excavator with 2.5 t operating weight, equipped for professional applications in construction, civil engineering, landscaping, and municipal sectors. ➡️ Special price due to stock clearance / B-grade equipment ➡️ Technically fully operational, ready for immediate use ➡️ Machine with up to 20 operating hours ➡️ Includes hydraulic quick coupler and 3 buckets (25 / 50 / 100 cm) ➡️ Cosmetic defects, storage marks, or transport damage possible The machine features a robust specification and is designed for demanding tasks. Standard steel tracks ensure high stability, excellent traction, and long service life, even in tough operating conditions. Get in, start, and work – this excavator is ready to operate immediately and works flawlessly. EQUIPMENT & BENEFITS: • Kubota D1105 diesel engine (original) • 14 kW continuous power / up to 18.4 kW peak • Water-cooled diesel engine • Standard steel tracks • Load-sensing hydraulics • Hydraulic flow rate: 61.6 l/min • Hydraulic pressure up to 25 MPa • Side-swing boom • Enclosed comfort cab • Heating and air conditioning • Ergonomic joystick controls • LED work lighting • Hydraulic quick coupler • Includes 3 buckets: 25 cm, 50 cm, and 100 cm TECHNICAL DATA: • Operating weight: approx. 2,500 kg • Digging depth: up to 2,370 mm • Dump height: up to 3,500 mm • Transport width: approx. 1,500 mm • Travel speed: approx. 2–4 km/h • Climbing ability: approx. 30° Codpfsx Hhu Nox Akcogt Price €15,000 net plus VAT Sales Notice: Sold as B-grade / special clearance item. The machine is fully functional, immediately operational, and is sold with a hydraulic quick coupler and a set of 3 buckets (25 / 50 / 100 cm). Cosmetic defects, storage, or transport damage may be present. Operating hours up to 20 hours. Location / Delivery 📍 Location: Rheda-Wiedenbrück 🚚 Delivery throughout Germany and Europe available at extra cost 🔧 Inspection available by appointment Only 2 machines left – while stocks last. Contact us now to secure the special price and start working immediately.

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: SPE-Spero-LTX-340, The device was used for research purposes. SPE-Spero-LTX-340, MIR microscope with "Hyper Spectral Imaging" function; spectral coverage (1900 to 950 1/cm). Enhanced LowMag lens 4.0X; NA:0.3, 2.0mm FOV. Dedicated IR-transmission mode. Broadband 480*480 pixel microbolometer camera, including high-precision automated stage ( Cgsdpjyxc Twjfx Akcst

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 19 l, color: orange, overall weight: 1,800 kg, operation weight: 1,800 kg, lifting height: 3,570 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.04 m³, digging bucket width: 485 mm, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable boom, adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, Immediately available – Get in & start working! Are you looking for a reliable, modern, and ready-to-use mini excavator in the 2.0-ton class? The LT-20 PRO from Tec-Point GmbH impresses with high performance, premium build quality, and maximum operator comfort – perfect for construction, landscaping, and municipal applications. Thanks to its compact design and state-of-the-art load-sensing hydraulics, this machine is ideal for confined jobsites and powerful enough for demanding earthmoving and foundation work. The enclosed cab with heating makes the LT-20 PRO a true all-season professional machine! ⭐ Your advantages at a glance ✅ Swing boom – ideal for work in tight spaces ✅ Telescopic undercarriage 990–1,300 mm – maximum stability ✅ Load-sensing hydraulics – precise and energy-efficient control ✅ Axial piston pump with variable displacement ✅ Travel motors with high/low speed ✅ Double cast counterweights – increased stability ✅ Robust 230 mm rubber tracks – durable and wear-resistant ⚙️ TECHNICAL DATA Operating weight: approx. 1,800 kg Engine: Kubota D902 | 3-cylinder diesel Power: 11.8 kW / 16.1 HP Digging depth: up to 2,270 mm Reach: up to 3,910 mm Travel speed: 2.2 / 4.5 km/h Cgedpex Hg D Aefx Akcst Gradeability: 30° ️ COMFORT & FEATURES ✔ Enclosed comfort cab incl. heating ✔ Ergonomic joystick controls ✔ LED work lights ✔ Comfort seat for long operating hours ✔ Dozer blade ✔ Hydraulic safety valves ✔ Reinforced steel construction for maximum durability INCLUDED IN THE PACKAGE: 3 BUCKETS The scope of delivery includes 3 professional buckets: ✅ 25 cm trenching bucket ✅ 50 cm digging bucket ✅ 100 cm grading bucket ➡️ Ready for any jobsite out of the box! ➕ OPTIONAL EXTRAS AVAILABLE Hydraulic quick coupler ➡️ Note: The quick coupler shown in the images is not included in the standard set and can be ordered as an option. Hydraulic tilt quick coupler (tilting function) ➡️ Note: The tilt quick coupler shown in the images is not included in the standard set and can be ordered as an option. Hydraulic auger set up to Ø 300 mm ️ SERVICE & WARRANTY Maintenance every 250 operating hours or annually 12-month warranty throughout Europe Spare parts & service directly from our warehouse in Rheda-Wiedenbrück IMMEDIATELY AVAILABLE + DELIVERY POSSIBLE Europe-wide delivery organized on request Location: Rheda-Wiedenbrück Our machines are available immediately and ready for operation. We invite you to inspect and test any of our machines on site. SPECIAL PRICE €17,500 net (RRP) Special offer available – contact us! Request more information now & secure your advantage! Demand is high – secure your LT-20 PRO today. ➡️ Contact us directly via Machineseeker or give us a call – we are happy to advise you personally!

Condition: new, functionality: fully functional, Year of construction: 2022, overall weight: 150 kg, total height: 2,300 mm, total length: 1,200 mm, total width: 600 mm, controller model: SPS-Steuerung, working width: 300 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, number of drawers: 1, positioning accuracy: 1 mm, working height: 30 mm, working length: 400 mm, working range: 400 mm, Equipment: CE marking, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design Codoyx Hgbjpfx Akcogt • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) Cgodpfjyxccrsx Akcot - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2026, functionality: fully functional, position of the milling head: mittig, spindle speed (max.): 60,000 rpm, total height: 1,550 mm, total length: 1,870 mm, total width: 1,040 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, overall weight: 560 kg, working range: 420 mm, warranty duration: 12 months, drive type: Linearmotor, Equipment: rotational speed infinitely variable, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 RD is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 RD depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - profil frame with two maintenance doors - left and right. ESD Cgsdpfjxt Dk Rjx Akcet - standard vision system base module for teach-in programming - Working area is 420 x 330mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - disc and sliding doors ESD conform Optionally a vacuum cleaner unit can be offered later.

Condition: new, Year of construction: 2022, functionality: fully functional, total width: 600 mm, total length: 1,200 mm, total height: 2,300 mm, overall weight: 150 kg, type of input current: three-phase, input voltage: 400 V, working range: 400 mm, product height (max.): 30 mm, controller model: SPS-Steuerung Siemens Simatic HMI, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, positioning accuracy: 1 mm, Equipment: CE marking, documentation/manual, lighting, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH) Cgedpsyx Hrkofx Akcjt

Condition: used, weight of the machine ca. 110 kg dimensions of the machine ca. 950 x 435 x 980 mm ESS's newly developed "mti inverter series" for single-phase welding equipment, , which has already proven itself thousands of times over, is now being expanded to include a three-phase system. The combination of semiconductor technology, resonant inverter circuits and classic transductor technology also offers thepossibility of integrating the respective advantages into future- Cedpfjwf Rg Sox Akcsgt orientated welding devices in this case. --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Setting range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: built-in