Used Rösler Z 800 K Ha Tf for sale (62,845)

Condition: new, machine/vehicle number: 8df1ead53cc82aeb51e50a37d, empty load weight: 4 kg, maximum load weight: 13,880 kg, overall weight: 18 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis Turntable Disposal Fine-grained steel welded construction Container locking system: - 2 pairs of locking hooks embedded in the floor - Pneumatic actuation The container locking mechanism is a 2-point design, acting from the inside, and locking of roll-off containers with an inner web is not possible (for transporting roll-off containers with a sub-frame in accordance with DIN 30722) Note! At the start of the roller recess at the front, the container must be pushed on completely flat! Longitudinal guide rails can be moved sideways and removed, rails approx. 115 mm high Turntable with strong ball bearing slewing ring 8 pairs of lashing mushrooms at the top and sides of the outer frame, 5 tons each 7 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included) 2 wheel chocks with holder Hodei Ri Nuspfx Agmsnn Aluminum side bumpers Steel underride guard Quarter-shell mudguards according to EG with anti-spray flaps according to EG Towing equipment Trailer turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, floor Steel floor Roller recess for container recessed in the floor at the frontfor roll-off containers from 5,000 - 7,000 mm in length Note: Slight floor undulation possible due to welding distortion! Drive-on ramps Lockable storage space for loading ramps underneath the loading area Operating instructions A special permit is required for axle loads of 10,000 kg. Approval must be applied for individually in each federal state; the legislator does not have to grant approval for 20 t GG. Customer risk. The specified total weight is technically possible; depending on the load, the total weight may not be achieved while complying with the permissible axle/support and fifth-wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Warning sign according to ECE - 70 Paint finish Frame DB 7350 nova gray 15-year warranty against rusting through Note: Bottom corrugation possible due to hot-dip galvanizing! Drawbar KTL black Attention: Archive pictures!

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! Hodpod Iipmefx Agmsnn 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller Hsdpfxjfg E Hls Agmenn • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams Hnjdpfofgyifex Agmjn as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Year of construction: 2007, condition: used, For inquiries regarding this attachment, Mr. Herden (by phone) will be happy to assist you. SIMEX TF 800 Rock Cutter / Milling Head / Tunnel Cutter / incl. Liebherr SW48 Adapter Plate / Year of manufacture: 2007 / in stock & immediately available Price: €13,890.00 net / €16,529.10 gross Drum width: 800 mm Milling speed: 75 - 115 rpm Hydraulic motor power: 61 (83) kW (HP) Required oil flow: 105 - 190 l/min Required oil pressure: 350 - 200 BAR Max. vertical force: 31.8 kN Operating weight (standard drum): 1,035 kg Recommended excavator weight: 14 - 22 tons Equipment: - incl. Liebherr SW48 adapter plate We have a large stock of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) available for immediate delivery. We carry a wide range of different attachments in our warehouse, all available for immediate delivery! Mr. Herden (phone) is happy to assist you. On request, we are happy to provide you with a financing quote as well. We are official sales and service partners of: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers - JCB Construction Machinery Hnedpfx Asyxagnegmen - Mercedes-Benz - Iveco With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. Errors and prior sale reserved! Internal no.: 310390 = Further information = Curb weight: 1,035 kg For further details, please contact Marius Herden.

Condition: good (used), The machine has been overhauled many new parts new cables Hedpfxjv Ihdzs Agmsnn new hydraulic station The machine has been checked, is functional, We can send a video.

Condition: used, functionality: unexamined, Ferwood Code: RS0002835 - Manufacturer Code: SF57DRE90L4/TF/Z - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service, please contact us. 42KG - 70X46X34 Hnedpfoyb Smqox Agmon

Condition: used, Year of construction: 2002, functionality: fully functional, fully functional machines are sold separately.filler, dry air line, case former, case packer, case sealer, decapper, silo caps Hnjdpfxswlg Swe Agmon

Condition: excellent (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 800 x 8 mm Hsdpsvy Umtefx Agmonn -Inside: Ø: 80 mm -Hole circle: Ø 120 x 22 mm / Ø 160 x 26 mm -Number of teeth: 118 teeth -Weight: 20 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, Folding machine complete with MBO SAP 46 L delivery (MBO Z 2 mobile blade also available upon request) Hnjdpfx Agswmwldemen

Condition: excellent (used), For sale is a high-quality granite tracer plate (measurement plate) made of natural granite, designed for precise measurement and inspection tasks. The plate is mounted on a stable steel stand with adjustable leveling. Technical data: • Manufacturer: HAHN & KOLB Stuttgart / Johann Fischer Aschaffenburg (JFA) • Type: granite measurement plate • Plate dimensions: 1000 x 800 mm • Plate thickness: approx. 120 mm • Accuracy class: 0 according to DIN 876 • Permissible accuracy: 0.0080 mm • Measured accuracy: 0.0065 mm Hnodpfxezdan Us Agmjn • Last calibration: 29.03.2016 • Material: natural granite • Steel frame with level adjustment Advantages of granite: • High wear resistance • No corrosion • Very good dimensional stability • Resistance to temperature changes • Ideal surface for precise measurements Condition: • Used • Work surface in very good condition • Normal signs of use on the stand • Condition as shown in the pictures Application: • Measurement laboratories • Tool rooms • Quality control • Mechanical and production workshops • Precise measurements and part tracing Included: • Granite plate 1000 x 800 mm • Original steel stand

Condition: excellent (used), Weishaupt G50-8000kw gas burner Hsdpju I Ry Nsfx Agmjnn

Condition: excellent (used), Ygnis U8000/6281kw boiler,Buderus,Loos,Bosch,Viessmann Hnjdpfx Aom Hbh Uegmsn

Condition: excellent (used), The scope of delivery includes: 02x workbench stand, used Material color: sendzimir galvanized Hedpfxei Ew Dzo Agmsnn frame profile: 90 x 75 x 2,00 mm stand height: 900 mm stand depth: 800 mm Incl. cross and diagonal braces, foot plates The stands are pre-assembled ( screwed truss ) 04x workbench crossbars, used Material color: RAL 7035 light gray box profile: 80 x 40 mm Traversentyp: TRV1-240-084-30CE clear width: 2.400 mm 08x safety pins, new finish: completely galvanized The pictures serve to illustrate the material. The material color may differ if necessary. - The workbench racks are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually about 5 working days.

Condition: excellent (used), WEBSITE HYDRAULIC RESCUE SET WEBER HYDRAULIK DIN 14800 H2 Hnjdpfjyxtcvjx Agmen For sale: Professional hydraulic rescue set by WEBER HYDRAULIK, used in technical rescue operations by fire brigades, emergency services, and industry. The set includes: - Manual hydraulic pump - 2 hydraulic cylinders / spreaders - Hydraulic hoses - End fittings, adapters, extensions - Spreading and supporting elements - Original transport case - Documentation as shown in the photos Technical data: Manufacturer: WEBER HYDRAULIK Set type: Hebesatz DIN 14800 H2 Working pressure: 630 bar Lifting force: 80 kN or 150 kN Condition: Used Condition: - Fully operational - Complete set as pictured - Normal signs of use, paint abrasions - Stored in transport case Additional information: - Professional equipment - Ideal for workshops, technical service providers, emergency services, or collectors - Shipping or personal pickup available

Condition: new, For sale: professional MOTEK electric motor with brake. Brand-new unit, warehouse stored, never installed. Italian production – very high manufacturing quality. The motor is fitted with an electromagnetic brake – ideal for industrial applications, machinery, conveyors, pumps, and drives. Technical specifications: Manufacturer: MOTEK Model: ET90SLa-2 Power: 3 kW RPM: approx. 2800 Voltage: 230 / 400 V Frequency: 50 Hz Current: 11.9 A / 6.9 A Power factor (cos φ): 0.81 Brake torque: 7 Nm Brake supply: 103 VDC / 230 VAC Duty cycle: S6 40% Weight: approx. 16.2 kg Country of manufacture: Italy Condition: New, warehouse stored Possible minor signs of storage Hnedpfx Ageyvadmjmjn

Condition: like new (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: HB311, 1 Vetter AS8-3.0 column-mounted slewing crane, capacity 800 KG Load capacity at full outreach: 800 KG / 0.8 tons Height: approx. 4 m, upper carriage outreach: approx. 3.67 m Outreach: approx. 3 m, hook height: approx. 3.2 m Base plate: 105 cm Total weight: approx. 900 kg Including 800 kg Demag DC chain hoist (2 lifting speeds) Connection: 400V, 16A, slewing range: 360° The crane is disassembled and immediately available Item location: 75053 Gondelsheim Hnsdpfx Aoy Tt Nxogmon Only the crane system shown in the pictures is being sold Very good condition – almost new, see pictures Shipping via freight forwarder or collection by appointment

Year of construction: 2008, condition: good (used), machine/vehicle number: SB169, DEMAG KBK crane canopy Crane runway dimensions approx. 6x5m Payload / lifting capacity 800 KG - 0,8to Technical data of the system: Crane runway made of Demag KBK2-T / KBK3 rails Running rail 6m, bridge 5m System is supplied complete: KBK rails, rail joiners, trolleys, end plates, cable towing, brackets/hangers etc. incl. Demag DC 800KG chain hoist, lifting height approx. 5m Crane is disassembled and immediately available Used condition, see pictures Hnjdpforwi Sasx Agmjn Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Year of construction: 2001, condition: excellent (used), machine/vehicle number: BO834, DEMAG KBK crane canopy crane runway with dimensions approx. 18x6m (6m bridge) This crane is available several times ! Payload / lifting capacity 800 KG - 0,8to Technical data of the system: Crane runway made of Demag KBK2 rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. Crane is with internal power supply incl. 800KG Demag DK chain hoist - lifting height approx. 3m Crane is disassembled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Hedoupvyijpfx Agmenn Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: excellent (used), Year of construction: 2000, operating hours: 10,900 h, functionality: fully functional, overall weight: 16,000 kg, power: 308 kW (418.76 HP), Willibald MZA 3500 / Shredder / Chipper / Crusher • Manufacturer: Willibald • Type: MZA 3500 • Year of manufacture: 2000 • Operating hours: 10,900 hours • Engine: MAN D 2876, 6-cylinder diesel • Power: 308 kW / 418 hp • Inlet opening: 500 mm • Number of axles: 2 tandem axles Hjdpfx Ajzdtzmogmonn • Braking system: Air pressure • Number of cutting blades: 48 • Rotor speed: 1300 rpm • Drawbar: 40 mm • Fiberizing of organic material for composting, up to a diameter of 30 cm • Shredding of old wood and waste wood, up to a diameter of 30 cm • Total weight: 16,000 kg • German machine • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: good (used), Tool package 23 pieces various driven and rigid tool holders VDI 30 were mounted on Index C 200 Hsdpfxjiludzs Agmenn

Condition: ready for operation (used), Year of construction: 2015, number of axes: 4, Two Wire EDM machines manufactured in 2015 and 2019. These 4 axis ZK Genius 700 (2015) + ZK Genius 700 (2019) + Chameleon- Quad (2015) features a travel distance of 400 x 350 x 350 mm and a table size of 575 x 500 mm, accommodating workpieces up to 700 kg. Includes a controlled C axis and rotary spindle, along with a CO/2 Kraft & Bauer fire extinguishing system. Consider the opportunity to buy this ZK Genius 700 (2015) + ZK Genius 700 (2019) + Chameleon- Quad (2015) wire EDM machine. Contact us for further details. • 1x ZK Genius 700 (2015) — 22,056 hours • 1x ZK Genius 700 (2019) — 8,255 hours • Table size: 575 x 500 mm • Max workpiece weight: 700 kg • Generator power: 96 A • Controlled C-axis and rotary spindle • C module (for carbide, PCD, or dressing) • O module (for very fine surface roughness) Additional equipment • CO/2 Kraft & Bauer fire extinguishing system • Extraction device • CIMCO Editor for path erosion • 1x Chameleon Quad (2015) automation: • 176 electrode slots • 9 UPC pallet slots with loading drawer • Double rotary gripper for Erowa ITS Hnsdpeyip Arsfx Agmsn • Single gripper for UPC pallets

Condition: new, empty load weight: 2,850 kg, maximum load weight: 7,650 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,580 mm, loading space volume: 46 m³, suspension: air, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 2 x rows of combination lashing rails, 7 pairs of lashing eyes in the floor, load securing to 12642 Code XL, 1 x interior light, side wall thickness and front wall thickness each approx. 17 mm, , Rental price from ¤ 580 per month , , -- Subject to printing errors, mistakes and changes, sample images --, More data at: !, More Details: ! Hnodpfx Ajzddh Eegmsn

Condition: used, first registration: 01/2017, overall weight: 3,000 kg, color: red, Equipment: crane, Kinshofer - Hiab KM 604 HPX-250 two-jaw grapple with rotating head 65 cm jaw height Hnjdpfx Aezdxnfjgmsn 48 cm jaw width 248 kg dead weight 3,000 kg total weight Two-jaw grapple in very good overall condition, first owner. No liability for typographical errors or data transmission errors. Subject to prior sale. Daily cash purchases of vehicles, construction machinery, trailers, and semi-trailers from the model year 2000-2026.

Condition: used, mileage: 176,451 km, power: 96 kW (130.52 HP), first registration: 06/2017, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 08/2027, color: white, gearing type: mechanical, emission class: euro6, Equipment: ABS, central locking, electronic stability program (ESP), had accident, soot filter, * Engine damage/timing belt slipped * First owner Hnjdpfx Agjzdwtaomjn * 96 kW * Tow hitch * L3H2 Special equipment: Audio system: Radio/CD player with multi-function display, Express-Line package, cargo area light (LED), tire repair kit, Visibility Package 1, Seat Package 2: Driver's seat (4-way adjustable) - passenger double seat, synthetic leather Additional equipment: 3rd brake light, storage compartment in the headliner of the driver's cab, airbag on the driver's side, traction control system (ASR), turn signal integrated into the exterior mirror, on-board computer, headliner in the passenger compartment, tachometer, electronic brake force distribution (EBD), electronic differential lock (EDS), driving assistance system: hill start assist, driving assistance system: emergency brake assist, generator 165 A, grab handle B-pillar, rear wing doors without glazing (opening angle 180 degrees), heater with recirculating air function, body/superstructure: high-roof panel van standard, body variant: medium-height roof, cargo area partition high behind driver and passenger, steering column (steering wheel) adjustable in height/length, headlight range adjustment, truck registration, engine 2.0 L - 96 kW TDCi CAT, production plant: Otosan, wheelbase 3750 mm, low emission according to emission standard Euro 6, sliding door cargo/passenger compartment right, wide side protection strips (side cladding), seats in cargo/passenger compartment: 1st row, 3-seater bench, steel rims 6.5x16, bumper partially painted, rear step integrated, tinted glazing.