Used Röder Drilling And Milling Center For Long Parts for sale (45,730)

Condition: good (used), Year of construction: 2009, Ref. -No.: 10026 Manufacturer: SCHIESS Type: VMG4 MA90 Year of construction: 2009 Type of control: CNC-Steuerung Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Turning Diameter: 5000 mm Turning Diameter Over Bed: 4000 mm Spindle Speeds: 0 - 120 RPM Clamping Diameter: 4000 mm Cross Travel: 420 x 340 mm Max workpiece height: 3000 mm Main Drive: 52 kW Max. Tension: 120000 N Max. Payload: 50 t Power Capacity - Table: 110 kW Max torque faceplate: 100 kNm Further information: Automatic tool changer with 80 positions (AAC) Automatic attachment changer for 6 milling heads Live spindle C-axis table Ksdpfxjzx Nw Tj Ah Esdt Travel of the Y-axis gantry columns Drilling and milling head (master head principle) Straight drilling and milling head GB-1B Renishaw RBP 60 touch probe Hand terminal Teleservice Internal and external coolant Operator cabin Chip conveyor SADDLE (X-AXIS): Horizontal movement from the center to the right side 4,800 mm Horizontal movement from the center to the left side 3,100 mm Vertical distance between the saddle rails 1,400 mm Speed / range 0 - 16,000 mm / min GANTRY TRAVEL (Y-AXIS): Gantry stroke 5,000 mm Feed 0 - 16,000 mm / min RAM (Z-AXIS): Maximum cutting force when turning 60 Kn Enter minimum bore 550 mm Guide length 1,600 mm Speed / feed range 0 - 16,000 mm/min Spindle speeds: Range 1 rpm Range 2 0 - 1,100 - 3,150 rpm Spindle torque: Range 1 2,400 - 2,400 - 850 Nm Range 2 450 - 450 - 160 kNm

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Kdjdpfx Ajy N Du Dsh Eet Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: used, Year of construction: 2012, functionality: fully functional, Control system: Matrix II Travel ranges: X-axis 207 mm X2-axis 141 mm Y-axis 100 mm Y2-axis 70 mm Z-axis 760 mm Z2-axis 815 mm Main spindle: Drive power 22 kW Max. spindle speed 5,000 rpm Kdsdpfez Dtmgox Ah Ejt Spindle nose A2-6 Counter spindle: Drive power 22 kW Max. spindle speed 5,000 rpm Spindle nose A2-6 Tool turret: Number of tool positions 24 Max. speed of driven tools 6,000 rpm Tool stations 24 Driven tool stations 24 2 pcs. 12-position turret Max. turning diameter: Max. turning diameter (upper turret) 344 mm Max. turning diameter (lower turret) 210 mm Max. swing diameter: Max. swing diameter (upper turret) 370 mm Max. swing diameter (lower turret) 320 mm Additional equipment: Bar feeder LNS Robot interface Automatic door Tool setter on the right and left Chip conveyor, discharge to the right Separate coolant system 15 bar high-pressure pumps Coolant temperature control

Condition: excellent (used), Year of construction: 2011, operating hours: 7,541 h, functionality: fully functional, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, type of input current: three-phase, total height: 2,067 mm, total length: 5,671 mm, total width: 2,721 mm, overall weight: 8,000 kg, spindle diameter: 250 mm, Equipment: documentation/manual, Main spindle: 25 kW, 5000 rpm, SMW Autoblock chuck diameter: 250 mm, bar diameter: 65 mm. Counter spindle: ISM52, 20 kW, 6000 rpm, SMW Autoblock chuck diameter: 210 mm. Turning and milling spindle (B-axis): HSK63A, 18000 rpm, external/internal coolant with high-pressure flushing at 20 bar. Kdodpoz Dpm Nefx Ah Eet Direct axis measurement. Tool magazine for 24 tools. Chip conveyor, extraction system with filtration. The delivery includes various HSK63A tool holders. Direct sales to end users only. W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: used, Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, overall weight: 14,400 kg, Mazak Integrex 300 3 ST Control -Mazatrol 640 mt pro 2 Spindles 1500mm No CE 2005/05 in very good condition Turret lathe.....10 tool ATC.....40 tool Kedpfx Ahjx Rkvqs Eedt Maximum Swing 33.5″ 850.9 mm Maximum Swing (Y-axis use) 26″ – 33.5″ 660.4 mm – 850.9 mm Maximum Swing over Cross Slide 33.5″ 850.9 mm Maximum Swing over Lower Turret 16.5″ 419.1 mm Located in Israel under power and ready for inspect . This CNC made in Japan and definitely needs a permit of MATI

Condition: used, Year of construction: 2013, functionality: fully functional, Equipment: documentation/manual, Mazak Machining Center 5-Axis (4 + 1 Positional) Variaxis J-500 Model Year 2013 Mazatrol Matrix Nexus 2 CNC Kdodpfxozxpv No Ah Eot

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 5101163, spindle motor power: 30,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, type of input current: three-phase, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, total height: 3,800 mm, total length: 9,100 mm, total width: 7,300 mm, distance table center to spindle nose: 950 mm, overall weight: 29,000 kg, input voltage: 400 V, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 700 mm, coolant supply: 20 bar, table length: 3,500 mm, table height: 900 mm, table width: 1,200 mm, number of slots in tool magazine: 45, Equipment: chip conveyor, documentation/manual, The machine is in working condition and has no problems. Kdjdpfx Ahjzq Rz Dj Eot

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter: 20 mm, spindle motor power: 5,500 W, spindle speed (max.): 8,000 rpm, spindle bore: 25 mm, travel distance X-axis: 50 mm, travel distance Y-axis: 350 mm, type of input current: three-phase, bar passage: 20 mm, overall weight: 4,200 kg, spindle diameter: 20 mm, Equipment: documentation/manual, rotational speed infinitely variable, Steuerung: Fanuc 310i Hauptspindel Drehzahl: 10.000 U/min Leistung: 5,5 kW Drehmoment: 14 Nm Stangendurchlass: max. 20 mm C1-Achse: 0,001 Verfahrweg Z1-Achse: 80 mm Gegenspindel Bjjgsn8yaky Drehzahl: 10.000 U/min Leistung: 5,5 kW Drehmoment: 14 Nm C2-Achse: 0,001 Verfahrwege X2 / Z2-Achse: 240 / 300 mm Eilgang in X2 / Z2 Achse: 40 m/min Werkzeugträger I (X/Y) Technologie: Linearer Schlitten Innenbearbeitung: 6 Stationen Werkzeughalter: 20 mm Außenbearbeitung: 6 Stationen Werkzeughalter: 12 x 12 mm Angetriebene Werkzeugstationen: 5 Werkzeugantrieb: 3.450 / 6.000 U/min Werkzeugaufnahme: Spannzangenfutter, ESX 16 Verfahrwege in X/Y-Achse: 50/350 mm Kedpfx Ahszz I Dko Eedt Eilgang in der X/Y-Achse: 40/30 m/min Stangenlader BOSS 332 E Werkzeugträger II (Y) Technologie: Linearer Schlitten Innenbearbeitung: 4 Stationen Werkzeugaufnahme: 20 mm Außenbearbeitung: 4 Stationen Werkzeughalter: 12 x 12 mm Angetriebene Werkzeugstationen: 5 Werkzeugantrieb: 3.450 / 6.000 U/min Werkzeugaufnahme: Spannzange, ESX 16 Verfahrweg in Y2-Achse: 120 mm Eilgang in der Y2-Achse: 40 m/min DETAILS ZUR MASCHINE Gewicht: 4200 kg Angeschlossene Last: 30 kVA Betriebsspannung: 400 V / 50 Hz AUSRÜSTUNG Spänemanagement: Späneförderer Kühlmittelmanagement: Kühlmittelpumpe Weitere Ausstattung: Signallamp

Condition: good (used), Year of construction: 2012, functionality: fully functional, DOOSAN PUMA 2600S – CNC turning center with subspindle, FANUC, year 2012 We offer for sale a DOOSAN PUMA 2600S CNC turning center with subspindle, equipped with a reliable DOOSAN-FANUC i Series control system. The machine is in operation and can be demonstrated and tested upon request. Technical specifications: Manufacturer: Doosan Infracore Model: PUMA 2600S Year of manufacture: 09/2012 Serial number: ML0218-000034 CNC control: DOOSAN-FANUC i Series Configuration: main spindle + subspindle Max. turning diameter: approx. 376 mm Max. turning length: approx. 760 mm Main spindle chuck: approx. 10" Bar capacity through main spindle: approx. 76 mm Max. main spindle speed: approx. 3,500 rpm Main spindle power: approx. 18.5 / 22 kW X-axis travel: approx. 260 mm Z-axis travel: approx. 830 mm Turret: 12 positions Automatic subspindle for complete part machining Chip conveyor Rated machine power: 40.7 kVA Power supply: 200/220 V, 3 phases, 50/60 Hz Machine weight: 5,400 kg Robust CNC turning center suitable for both series and single-piece production. Thanks to the subspindle, it enables machining of the part from both sides without the need for manual switching between individual operations. Kdjdsz Dq Inopfx Ah Eet The machine is currently powered on and can be demonstrated in operation.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 13,747 h, machine/vehicle number: 00820000561, CNC turning machine DMG Mori CTX beta 800 TC, No. 00820000561, year of manufacture 2015, 24,796 operating hours, 13,747 load hours. including: - DMG Mori control system - Oil leak on the Ergoline pump housing - Chip conveyor - Machine coolant system - Lubricant filter system - Material loader ILS MUK 7012-III, Machine No. 74101508, year of manufacture 04/2016 The machine can be purchased via an online auction on our website. You can access it by clicking on the link in the advertisement. Auction ends: October 7, 2026, 6:00 PM. Kdodpoz Dv Ndefx Ah Eot

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G5-M030-13-2V-R10-15, total length: 7,200 mm, total height: 2,700 mm, input voltage: 400 V, total width: 2,700 mm, Technical Specifications Brand: Schraml Model: TopDRILL M-RX 130 Roto-10 Year: 2015 Direction of rotation: Right to left Condition: As is (Very good condition) Parameter Specification / Capacity - Machining height / Max. 1300 mm - Maximum glass height / Unlimited (Open-top model / open-top design) - Maximum glass length / 3200 mm - Glass size for drilling min. 600 x 210 mm - Glass size for milling min. 750 x 210 mm - Maximum glass weight 150 kg - Glass thickness for drilling 4 - 40 mm - Glass thickness for milling 4 - 20 mm - Tool magazine (Roto) Automatic double revolver magazine 10 + 10 (front and rear), total 20 positions - Tool diameter Up to max. 80 mm - Tool connection 1/2" gas thread with length 75 mm - Spindle speed 0 - 12,000 rpm - Spindle cooling Water-cooled - Control & Software Schraml software with Siemens electrical components - Included accessories Automatic sharpening device for tools - Separate vacuum pump for glass fixing Kdsdpjz A D H Usfx Ah Est - Additional conveyor (1 meter) - Machine dimensions L 7200 mm x W 2700 mm x H 2700 mm - Machine weight 3800 kg - Electrical connection 3x400V + N + PE, 50/60Hz, total power: 25 kW Dismantling, loading and installation can be carried out on request by our service team.

Condition: ready for operation (used), Fehlmann Picomax 50 drilling machine with threading unit Speed: 125 - 4400 RPM Feed: 0.03 - 0.40 mm Drilling capacity in steel: 22 mm Threading unit Spindle stroke: 120 mm Stroke: 430 mm Accessories: see pictures You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Kdodpfxjzzvxis Ah Eet Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 2016, Vertical CNC drilling and machining center Manufacturer: Weeke Type: Optimat BHX Year of manufacture: 2016 Technical data - Working area X: max. 3,050 mm - Working area Y: 70,850 mm - Workpiece thickness Z: 12,60 mm - Workpiece weight: max. approx. 35 kg - Number of axes: 3 - Milling spindle: 5 kW - Milling spindle speed: max. 18,000 rpm - Tool holder: HSK-F63 or ETP 25, depending on the version - Tool change: automatic tool magazine - Tool positions: 4 - Vertical drilling spindles: 13 - Horizontal drilling spindles X: 4 - Horizontal drilling spindles Y: 2 - Drilling unit: V13 High Speed - Drilling unit power: 2.3 kW - Drilling speed: 1,500 - 7,500 rpm - Max. drilling depth: approx. 38 mm - Drilling diameter: max. approx. 35 mm - Spindle spacing: 32 mm - Dado saw: in X-direction - Dado saw blade: approx. 100 mm - Workpiece transport: throughfeed system / transport chain - Workpiece clamping: collet gripper, vacuum-free clamping system - Control system: HOMAG powerControl / powerTouch - Software: HOMAG woodWOP Kjdpozy N E Hsfx Ah Ejdt - Total connected load: approx. 11.5 kW - Dust extraction connection: approx. 160 mm - Dust extraction air requirement: approx. 2170 m³/h - Weight: approx. 1500 kg - CE Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 5,000 h, machine/vehicle number: 10000000826, approx. 7,000 operating hours, approx. 5,000 load hours including: - DMG Mori Slim Line control system - Chip conveyor - Rittal machine cooling system - Lubricant filtration system - Breuning ILS MUK-7012-IV material loader, year of manufacture: 12/2023 Kdodpfsz Dv Dzox Ah Eot The machine can be purchased via an online auction on our website. You can access the website by clicking on the link in the advertisement. Auction end date: October 7, 2026, 6:00 PM.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 100418005, travel distance X-axis: 1,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 590 mm, feed length X-axis: 30,000 mm, feed length Y-axis: 30,000 mm, feed length Z-axis: 30,000 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, mount diameter: 63 mm, total length: 9,485 mm, table length: 1,000 mm, total width: 4,609 mm, spindle speed (max.): 10,000 rpm, total height: 2,896 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, table load: 300 kg, position of the milling head: Horizontal / Swiveling, workpiece weight (max.): 300 kg, torque: 136 Nm, rotational speed (min.): 3,800 rpm, rotational speed (max.): 16,000 rpm, overall weight: 18,000 kg, working range: 1,000 mm, spindle nose: HSK-A63, tool weight: 6 g, grinding spindle motor power: 54,000 W, spindle motor power: 54,000 W, Equipment: rotational speed infinitely variable, Zero hours HSTM 1000HD 5-Axis Turn-Milling Center Was not used in production / just OEM commissioning and preserved. Basic machine HSTM 1000HD X, Y, Z axis with absolute linear scale A axis Swivel axis / B axis C axis Pressure control of head clamping CNC-control system SIEMENS 840D SL Remote diagnosis system via Ethernet Patrol light Control cabinet with air-condition Milling spindle 16’000 rpm, HSK-A63 Machining hour counter Tool handling system with double gripper Chill unit Hydraulic unit Machine housing with front door L shape Standard machine color scheme Coolant supply unit, low pressure, paper belt filter Flush Gun Chip conveyor Oil Mist exhaust system Documentation 1-fold in English + CD Machine option package Minimum quantity lubrication system High pressure cooling through spindle BEMA automatic adjustable coolant nozzles Tool measuring system BLUM Work piece measuring system BLUM 3D Probe Rotoclear window Handweel HT 2 Automatic operator doors CAD / CAM Software package “ Hamuel Single Blade” CSE Siemens simulation Transportation and lifting tool set Commissioning tool set Geometrical measurement set Available in Bangkok, Thailand Worldwide shipping Kjdpfx Ajzvuu Soh Ejdt

Condition: ready for operation (used), ARBOGA UM 3508 / Drilling and milling machine with Heidenhain digital display Kedpfxezlg I No Ah Eodt -Drilling capacity in steel: 35 mm -Thread cutting: M 24 -Travel ranges X/Y/Z: 450x250x500 mm -Table dimensions: 650x270 mm -Cross slide table -Automatic feeds -Heidenhain digital display -Speed range / gear: 70-2160 RPM -Automatic feed -Overhang: 320 mm -Drilling depth: approx. 170 mm -Drilling/milling head: swiveling -Drilling depth stop -Drive power: 1.5 kW -Control panel -Indexing head -Machine feet -Documentation -Dimensions: L x W x H: 1.2 x 1.1 x 1.9 meters / Weight: approx. 800 kg Errors and omissions excepted.

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 110001, For sale: SACEM drilling and milling machine for machining large parts. The machine is fully functional and is currently used in production – primarily for finishing operations. The machine is particularly suitable for machining large, unwieldy parts. Weight: 10 t Voltage: 380 V, 50 Hz Connected load: 20 kW Compressed air: 3.5 - 6 bar Spindle speed: 4 - 1600 rpm Feed rate: 3 - 2500 mm/min Tool holder: SK40 Drilling depth / spindle travel: 800 mm Travel ranges: x: 900 mm y: 900 mm z: 1200 mm Clamping area: 1000 x 1200 mm Max. workpiece weight: 4000 kg Accuracy: 0.02 mm Please note: The machine has already been disassembled and is ready for loading onto a truck in an open area. Various tool holders and clamping devices are included as accessories. If you are interested, we can send you photos. Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users / manufacturing companies (no resale to dealers) – corresponding company profile required. • Sale only within Germany or the EU. Sales / transfer conditions: • Disassembly, removal, and transport are the responsibility and at the risk of the buyer. Kodpfoxbn A Tsx Ah Esdt • The buyer is responsible for personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to your reply so that we can discuss the further details directly.

Condition: used, Year of construction: 2010, operating hours: 62,569 h, functionality: fully functional, machine/vehicle number: 00410001121, spindle speed (max.): 5,000 rpm, overall weight: 5,695 kg, Equipment: documentation/manual, We are offering this used DMG CTX beta 500 V6 CNC turning and milling center, year of manufacture 2010. Serial number: 00410001121 Year of manufacture: 2010 Kdsdpszv Tbqjfx Ah Eet Max. main spindle speed: 5000 rpm Max. counter spindle speed: 6000 rpm Weight: 5695 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Ksdpfxoxzq Ncj Ah Eodt Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Condition: new, Year of construction: 2026, The XZ7550ZB milling and drilling machine is the perfect tool for professionals. With a simple, uncomplicated design, this machine guarantees uninterrupted work for a long period of time. With a vertical head and horizontal spindle, the XZ7550ZB offers a wide range of machining options. The ISO 40 tool clamping cone ensures robust tool clamping, while the spindle auto-feed further increases productivity and efficiency. X- and Y-axis working feeds and fast Z-axis positioning feeds enable precise machining, while the extendable vertical head spindle facilitates access to workpieces. Mechanical feed in 3 ranges and an automatic threading option add flexibility. The vertical head swivelling from 0-90° and the upper extension and swivelling bar add extra functionality and precision. Machine description AUTOMATIC ELECTRIC FEED OF THE TABLE IN THE Y AXIS AUTOMATIC MECHANICAL FEED OF THE TABLE IN THE X AXIS AUTOMATIC SPINDLE FEED HEAVY, STABLE CAST IRON CASTING VERY PRECISELY MANUFACTURED SOLID CROSS TABLE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES IN ALL 3 AXES QUIET RUNNING THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION SWIVEL HEAD +/- 90° Technical data Max. drilling diameter 50 mm Max. horizontal milling length 100 mm Max. vertical milling diameter 25 mm Max. threading diameter M16 Max. boring diameter 120 mm Spindle taper ISO 40 50Hz spindle speed range and number (rpm) 72-1800 (8) Vertical, 60-1350 Horizontal (9) Distance between spindle and column surface 200-700 mm Distance between spindle and table 100-480 mm Distance between spindle axis and table 0-380 mm Number, width and spacing of T-slots 5 / 14 mm/44 mm Spindle travel 120 mm Table size 1000x240 mm Table travel 600x230 mm Feed of table 24-720 mm/min (8 speeds) Spindle feed 0.015; 0.08; 0.25 mm/rev. Motor (vertical/horizontal) 1.5 kW/1.5 kW Overall dimensions 1120x1060x2035 mm Weight 970 kg Scope of delivery Digital readout for 3 axes SINO ISO 40 Morse bushings Drill chuck B16 Kdodoud Ic Depfx Ah Ejt CE declaration of conformity Machine vice L - 160 mm Milling machine spindle with a set of collets for finger joint cutters Horizontal spindle support / ocular / Milling arbor long. Basic tools 24 V halogen lighting system Cooling system

Condition: ready for operation (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning-milling center TX8D -TX 8D control system -COMPLETE TECHNICAL DATA – SEE PHOTOS -Year of manufacture: 1994 -Hydrobar tool magazine -Tailstock -Various powered tool holders -Three-jaw chuck Kdedpfszpf I Asx Ah Ejt -Tool holder -Complete documentation Errors and omissions excepted.

Condition: excellent (used), Machine type: Drilling and milling machine Year of manufacture: 2014 Kdjdjyc Hguepfx Ah Est Drilling capacity in steel: approx. Ø 50 mm Thread cutting capacity: M26 Spindle speed: 32 - 2340 rpm Tool holder: MK ISO 40 (DIN2080) Quill stroke: 145 mm X-axis travel: 585 mm Y-axis travel: 240 mm Table clamping surface: 800 x 250 mm Table swivel range: +/-45° Table rotation range: +/-45° Weight: approx. 800 kg Dimensions (W x D x H): approx. 1500 x 1380 x 2250 mm Condition: very good Accessories: Various, according to drawers, see pictures

Condition: excellent (used), Year of construction: 2014, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 256316, turning length: 1,000 mm, turning diameter: 730 mm, spindle motor power: 18,500 W, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 1,100 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, rotational speed (max.): 1,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, torque: 160 Nm, workpiece weight (max.): 680 kg, spindle nose: Cône 7/24, N°40, table load: 880 kg, number of slots in tool magazine: 120, pallet changer: automatic, Equipment: CE marking, chip conveyor, documentation/manual, Secondhand Mazal Integrex i500V Kdedsyymrmopfx Ah Eot

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,728 h, functionality: fully functional, machine/vehicle number: 0040001634C, turning length: 500 mm, turning diameter: 240 mm, spindle motor power: 1,400 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 170 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 30 m/min, torque: 171,192 Nm, feed force X-axis: 3 N, The DMG MORI CTX Alpha 500 was manufactured in 2022. This versatile turning center is equipped with a Siemens controller and LNZ Quick load servo 80S2. Weight: 4,300 kg. Please contact us for more information about this machine. Kjdpfx Ahjyz S T So Ejdt

Condition: good (used), For sale: a conveyor belt with a length of 15.5 meters, ready for operation. ✅ Length: 15.5 m ✅ Belt width: 0.8 m ✅ Transport can be arranged ✅ A wide selection of conveyor belts available on site Please contact us. We will help you choose the right conveyor belt for your needs. Kdjdpfx Asz Dq Uujh Eot