Used Push Pull for sale (2,909)

Condition: used, Year of construction: 2017, functionality: fully functional, Automatic optimizing miter saw with complete optimization – TR-450 MATRIX - Motor power: 4.0 kW - Blade diameter: 450 x 30 mm, Z=72 - Cutting capacity according to cutting diagram Njdez Dp Imepfx Af Sjdb - Cutting capacity: 95 x 265 mm - Cutting capacity: 85 x 277 mm - Cutting capacity: 60 x 290 mm - Cutting capacity: 40 x 310 mm - Cutting capacity: 25 x 330 mm - Cutting cycle: 4 seconds - Pneumatically controlled cutting head - Work table tilted by 8° - Minimum workpiece thickness: 10 mm - Safety guard on the cutting head

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, total length: 16,240 mm, load capacity: 5,000 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, 2 Abus overhead cranes Nsdpfez Eruljx Af Sodb – Type: single-girder – Capacity: 5,000 kg – Lifting height: 6 m – Year of manufacture: 2012 – Hoist type: wire rope hoist – FEM/ISO hoist classification: 2m/M5 Dimensions – Span: 16,240 mm center-to-center – Installation height: 560 mm – Wheelset width including bumpers: 3,210 mm – Wheelbase: 2,700 mm – Suitable for crane rail: 50×30 mm – Dead weight: 3,690 kg Speeds – Hoisting: 5/0.8 m/min (2 speeds) – Trolley travel: 20/5 m/min (2 speeds) – Crane travel: 40/10 m/min (2 speeds) Features – Control: wired push-button panel with load display – Crane manual available: yes – Last maintenance: May 2026 – Condition: in good condition, dismantled but operational – Dismantled: no; October 2026 – 2 units available Steel structure including floor slabs and column-mounted slewing crane – Length: 32.5 m (approx.) – Year of construction: 2012 – Condition: in good condition – Dismantled: no; October 2026 Dimensions – Total length: 32.5 m (approx.) – Width (center-to-center) of crane runway: 16,240 mm – Total width: 16.7 m (approx.) – Distance from floor to top of 50×30 mm beam: 6,200 mm (approx.) – Column spacing: to be confirmed – Crane runway: HEA 260 – Columns: HEA 260 – Crane beam: 50×30 mm Includes – 16 x HEA 260 columns, height approx. 5,914 mm – Cross-braces – Floor slab measuring approx. 4.5 x 16 m – Floor slab measuring approx. 4.0 x 6 m – Column-mounted slewing crane with a lifting capacity of 1.6 tonnes

Year of construction: 2001, condition: good (used), Seith 1042.80.15, BJ 2001 Forklift attachment Push device Push fork Push-off Ndsdofgvv Tjpfx Af Sjb FEM2B mount approx. 41 cm for forklifts up to 2.5 tons Please refer to the nameplate for details Used condition, little used

Year of construction: 1978, condition: good (used), U.S. MODEL 50TX120 VERTICAL PULL DOWN BROACH Equipped with: Retriever Puller Hydraulic System Coolant System Chiller Chip Conveyor Manuals Specifications: Normal Broaching Capacity: 100,000 Lbs at 922 PSI Peak Force Capacity: 133,600 Lbs at 1350 PSI Main Slide Stroke (Bump Inches): 106 Maximum Cutting Speed: 20 Ft/Min. Maximum Return Speed: 40 Ft/Min. Main Pump Motor: 75 HP at 900 RPM Hydraulic Reservoir: 365 Gallons Handling Pump Motor: 10 HP at 1200 RPM Coolant Pump Motor: 1.5 HP at 1800 RPM Coolant Pump Capacity: 100 Gallons / Min at 23 Head Ft. Coolant Reservoir Capacity: 600 Gallons Approx. Floor Space ( Width x Depth x Height): 65" x 96" x 243" Net Weight, Approximate: 79,000 # Nsdportrzljfx Af Ssdb

Condition: good (used), BSTA 30 / 600 spm Bruderer Feed BBV 120/60 Press force max. 300 KN Power consumption from 1.5 to max. 5.5 KW Technical Air 6-10 bar Operator’s instruction Bed opening 250 mm +/-20mm Stroke: 8-40 mm Strokes per minute.: Max. 600 spm variable from 100-600 spm With Automatic central lubrication Main shaft cooler Pneumatic clutch and pneumatic brake Three working mode Programmable speed and number of strokes, Reverse flywheel mode Feeding of strip from left to right or right to left Strip pushing or pulling Roll feed BRUDERER BBV Strip width ca. max. 190 mm Feeding pitch ca. max. 60 mm Strip max. thickness 3,5 mm Distance between columns 325 mm Table height from floor 1000 mm Table surface area 540 x 300 Hole in the table 315 x 110 mm Ram surface dia. 250 mm Weight ca. 3.000 kg Dimension ca. 1100 x 1.400 x 2.200 mm Feed pitch up to max. 60 mm adjustable, highly accurate(tol. 0.02 mm) Nsdpfx Afeda Ha Nj Sjdb Emergency stop and all other CE safety guards and relays Indexing per minute, infinitely variable Automatic in feed, fully synchronized with punching moment More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: like new (used), Year of construction: 2012, operating hours: 4,541 h, functionality: fully functional, machine/vehicle number: SN:79004, travel distance X-axis: 1,035 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 620 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, nominal power (apparent): 14 kVA, torque: 96 Nm, controller manufacturer: Heidenhain, controller model: TNC 620, workpiece weight (max.): 1,000 kg, total height: 2,850 mm, total length: 2,500 mm, total width: 2,910 mm, table width: 540 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 5,100 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,541 h, coolant supply: 3 bar, distance table to spindle center: 150 mm, spindle motor power: 1,400 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in excellent condition and is almost like new. It has been used almost exclusively for aluminum prototype construction. Disassembly upon request. Here are all the details from the technical description. SN: 79004, Year: 2012 Commissioned: February 2014 UVA 1035 PLUS Heidenhain Vertical machining center with HEIDENHAIN TNC 620 control, new price, after discount, net 79,900.00 Standard equipment of the UVA 1035 PLUS as ex works: - Computer-optimized, vibration-damping machine base made of gray cast iron - Large linear guides with 45 mm width in all axes Description Overall price - CNC control Heidenhain TNC 620 - Ergonomically arranged control panel with electronic handwheel - Digital Heidenhain drives in all axes - Ball screws (supported on both sides and preloaded) diameter 40 mm - Pitch 12 mm in all axes - Rapid traverse rate 35 m/min in all axes - Guide covers (telescopic) in all axes - Spindle taper SK 40 DIN 69871 A - Tool pull stud DIN 69872 - Main drive with 13 kW, 96 Nm - Main spindle speed range 10 - 10,000 1/min - Preparation for internal cooling 20 bar - Tool changer (dual-arm gripper) with 24 storage locations - Work area full protection with large viewing doors and 2 work area lights - Large coolant tank with 380 l capacity - 2 chip drawers for easy and quick manual chip disposal - Flood coolant 3 bar / 60 l/min - Chip flushing in the work area - Spray gun for cleaning the inside of the machine - Signal light 2-color - Festo pneumatic system - Automatic central lubrication in all axes - All axes: Positioning accuracy +/- 0.005 mm - Repeat accuracy +/- 0.003 mm (ISO 230-3) - Painting in light gray (RAL 7035) and blue gray (RAL 7031) - Documentation - UVA Unverzagt machining centers comply with the CE standard UVA 1035 PLUS Heidenhain Technical details of the machine Travel ranges Travel X-axis [mm] 1,035 Travel Y-axis [mm] 540 Travel Z-axis [mm] 620 Distance spindle bottom edge to table [mm] 150 - 770 Work table Table length [mm] 1,200 Table width [mm] 540 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 1,000 Feed Rapid traverse X and Y axis [m/min] 35 Rapid traverse Z axis [m/min] 35 Diameter ball screw X and Y axis [mm] 40 Diameter ball screw Z axis [mm] 40 Main spindle Main spindle speed max. [1/min] 10,000 Main spindle power [S6-40% ED kW] 14 Main spindle torque max. [Nm] [S6-25%] 96 Tool holder SK 40 Tool magazine Number of tool magazine positions 24 Tool change time [sec] 2.8 max. tool diameter [mm] 80 max. tool length [mm] 300 max. tool weight [kg] 7 Coolant system Volume coolant tank [l] 380 Through coolant pressure [bar] 3 Through coolant [l/min] 60 Ndedpfezzrmpex Af Sob Internal coolant supply pressure [bar] 20 (optional) Air blow external yes Basic machine data Installation area width [mm] 2,910 Installation area depth [mm] 2,500 Machine height [mm] 2,850 Weight of the basic machine [kg] 5,100 Electrical connection power [kVA] 30 Required pneumatic connection [bar] 6 Required compressed air [l/min] 260 Control Manufacturer Heidenhain Control type TNC 620

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. Njdpfx Afjfz U Tqs Sjdb This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2026, condition: new, Our KVK 2A is a semi-automatic stretch wrapper with a cut-out for ground level access. The KVK 2A model is equipped with a pre-stretch system for 250% stretch. Thanks to the pre-stretch system, you can produce up to 3.5 meters of film on the pallet from 1 meter of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal contact tension, so that even light packages are not pulled off the turntable. With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 2A has a 1500 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of turntable and film carriage, as well as a power stretch unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. This model is our recommendation if you wrap very light packages or if you wrap more than approx. 30 pallets a day. The KVK 2A is ideal if no ramp can be used for space reasons. Or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement! Ndsdpfx Aozr Hwdjf Ssb

Condition: used, Type: AE 100 S Part No.: 202-00023 Steps/revolution: 1024 Model/Version: 471/V001 Interface/Code: Parallel/Binary Output level: Push/Pull +(11-27) Volts Njdpjy Apcmefx Af Sodb Option: F/R, Latch incremental adjustment

Condition: used, Year of construction: 2004, operating hours: 11,041 h, functionality: fully functional, machine/vehicle number: 132-37, nominal power (apparent): 28 kVA, controller manufacturer: Siemens, controller model: Sinumerik 840 D, overall weight: 9,600 kg, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer this used Chiron FZ 15K W vertical machining center, manufactured in 2004. It is equipped with a rotary table, and each of the two tables features a high-quality NC swivel table with a clamping bridge/zero-point clamping system from the manufacturer Spreizer. It was primarily used to manufacture smaller stainless steel parts. -Zero-point clamping system -Clamping/releasing pneumatically/hydraulically via push-button -Reneshaw TS 27 R for length measurement and breakage monitoring Sinumerik 840 D control system -Chip conveyor -The machine was operated exclusively with coolant and cutting oil. -The machine is equipped with a fire extinguishing system from Kraft und Bauer, which was regularly serviced by Kraft und Bauer. -The machine has age-related and usage-related wear and tear. It was primarily operated in a single-shift operation. It was regularly serviced and maintained by Chiron. We assess the optical condition as very good. The machine is immediately ready for full operation. Hour counter: 11041 hours Year of manufacture: 2004 Weight: 9600 kg Power supply: 3/N/PE Frequency: 50/60 Hz Operating voltage: 400 V Ndodpfxez Dbtzj Af Ssb Control voltage: 24 V Power: 28 kVA Rated current: 45 A Fuse: 50 A slow-blow/quick-blow If you have any questions or need more information, please send us a message or call us.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: DS 013.0091, RAW MATERIAL TOWER PME YOC 2017 TWIN SCREW EXTRUDER WEBER Type : DS 1327 YOC 2017 DIE NORDSON YOC 2017 CALANDER OMIPA Serial 09.38A24 YOC 2017 ROLL PLANA OMIPA Serial 09.38A24 YOC 2017 THICKNESS & DENSITY MEASUREMENT SEREL Ndjdpoz Dt Spofx Af Seb Serial 4031 YOC 2019 AIR BLOWERS & COOLING CHAPEL OMIPA Serial 22.10A88 YOC 2017 PULL ROLERS AND EDGERS OMIPA Serial 11.35A19 YOC 2017 2 BREAKERS TRIA YOC 2017 GUILLOTINE OMIPA Serial 16.30A19 TRANSPORTATION BELT OMIPA Serial 17.02A49 YOC 2017 10x TRANSPORTATION BELT BIELE WEIGHING BELT BIELE STACKER / ROBOT FANUC Serial E16Y3413 Type A05B-2612-B081 YOC 2016 Load 140 kg 2 SIDE SANDER COSTA Serial LB643001A Type KK9CCCC2200 YOC 2017 PORTAL STACKER BIELE Serial A6213-24 YOC 2017 LASERPRINTER MASCA ID TECHNICAL DETAILS Width : 2000 mm Extruder output : 1250 kg / hr ( possibly 1400 kg / hr ) Raw material PVC Raw material supply is a mixture of powders, ground recycled, micronised recycled Output is PVC plates size 2000 x 1390 x 3,75 mm Elecricity consumption : 41 000 KWH for 5 days production incl startup and stop of the line incl sander and extraction

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Ndodsz En Axspfx Af Ssb Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: used, mileage: 328,551 km, power: 552 kW (750.51 HP), first registration: 06/2018, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 3,900 mm, fuel: diesel, brakes: retarder, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total width: 2,550 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, parking heater, retarder, seat heater, traction control, = Additional Options and Accessories = - Remote-controlled central locking - Refrigerator - Leather interior - Lift axle - Air suspension - Hub reduction - Radio - Disc brakes - Sun visor - Auxiliary heater - Tool box - Two separate beds = Notes = Volvo FH 16. 750 8x4. 260,000 kg GCW. Push and pull. Dual clutch. Crawler gear. Retarder. Adjustable fifth wheel 3.5". Full air suspension. Leather seats. Heated and ventilated driver seat. i-park cool. = Further Information = Nodpfjzz N D Ejx Af Sedb Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Steerable; Tire tread depth left: 80%; Tire tread depth right: 80% Rear axle 1: Tire size: 385/65R22.5; Steerable; Tire tread depth left: 80%; Tire tread depth right: 80% Rear axle 2: Tire size: 315/80R22.5; Dual tires; Tire tread depth left (inside): 50%; Tire tread depth left (outside): 50%; Tire tread depth right (inside): 50%; Tire tread depth right (outside): 50% Rear axle 3: Tire size: 315/80R22.5; Dual tires; Tire tread depth left (inside): 30%; Tire tread depth left (outside): 30%; Tire tread depth right (inside): 30%; Tire tread depth right (outside): 30% Weights Unladen weight: 13,650 kg Payload: 20,500 kg GVW: 34,150 kg Interior Upholstery: Leather Financial Information Price: On request Identification Model number: FH16.750 8x4 / 260T / RETARDER / = Company Information = ALL PRICES ARE NET FOR EXPORT (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT, Govorim po ryccki). We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 10,000 kg, total length: 11,600 mm, total width: 2,560 mm, total height: 600 mm, input voltage: 220 V, type of input current: three-phase, input frequency: 60 Hz, TIR body/chassis repair frame for trucks and large-size vehicles TM-M60 This is a professional device designed for comprehensive repair and straightening of various body and chassis elements of trucks, delivery vehicles and cars. Thanks to its solid construction and the equipment with 6 towers with high pulling force (25 tons each), this frame allows for effective performance of advanced repairs, such as restoring the shape of damaged elements, straightening distortions or eliminating warps. High load capacity and precise tools make our repair frame perfect for professional workshops, guaranteeing speed, accuracy and reliability during repairs of large-size vehicles. Parameters: - Hydraulic pressure: 70 MPa (10000 psi) - Pneumatic pressure: 0.8 MPa - Maximum column tension: 25 tons (245 kN) - Load capacity: 50000 kg - Column working range: 360 degrees - Total weight: 10 tons - Number of towers: 6 Features: 1. With 6 towers, each with a maximum pulling force of 25 tons. 2. With a complete set of pushing and pulling tools, adapted to any type of straightening. 3. A lifting device with a capacity of 50 tons, which effectively repairs distorted beams. 4. With a 25 ton hydraulic arm that allows for the repair of distortions, bulges, twists, etc. 5. Four towers are 2500 mm high, and the other two are 4320 mm high. Ndedpfjvuxygex Af Sjb 6. Possibility to choose a color from the RAL palette. 7. Number of towers to be chosen by the customer.

Condition: excellent (used), mileage: 367,000 km, power: 463 kW (629.50 HP), fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 8x4, wheelbase: 4,000 mm, fuel: diesel, fuel tank capacity: 900 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2015, Equipment: AdBlue, retarder, Color: White Manufacturer: Mercedes-Benz Type: 4163 SLT 8x4 Chassis number: WDB9634261L922193 Year: 2015 Mileage: 367,000 km Engine: OM473, inline 6, 15.6 l, 460 kW (625 hp), 3000 Nm, Euro 6 Transmission: Mercedes Powershift / G 280-16/11.7-0.69 / Turbo Retarder Clutch Front axle: 9,000 kg | Leaf suspension | 385/65 R 22.5 Second axle: 8,000 kg | Air suspension | 385/65 R 22.5 Third axle: 13,000 kg | Air suspension | 315/80 R 22.5 | Hub reduction Fourth axle: 13,000 kg | Air suspension | 315/80 R 22.5 | Hub reduction GVW: 41,000 kg GCW: 250,000 kg / 500 tons push/pull if used with ballast box (not included) Equipment 900 L fuel tanks AdBlue tank, 60 L 24-volt electrical system JOST sliding fifth wheel, 3.5” New Rockinger R0*56E coupling Gigaspace cab Side skirts Work lights Tool boxes Bull bar with lights Wheelbase: 4,000 mm Axle ratio: I = 5.333 Cabin Sleeper cab Multi-functional steering wheel Cruise control Sun visor 2 x bed Air conditioning TV Leather upholstery Leather comfort seats Coffee maker Fridge drawer Storage boxes Radio / CD player / Bluetooth = Further information = General information Year of manufacture: 2015 Transmission Gearbox: Powershift / G 280-16/11.7-0.69 / Turbo Retarder Clutch, automatic Axle configuration Front axle: Tire size: 385/65 R 22.5; Max. axle load: 9,000 kg; Steered; Suspension: Leaf suspension Middle axle: Tire size: 385/65 R 22.5; Max. axle load: 8,000 kg; Steered; Suspension: Air suspension Rear axle 1: Tire size: 315/80 R 22.5; Twin tires; Max. axle load: 13,000 kg; Reduction: External planetary axles; Suspension: Air suspension Rear axle 2: Tire size: 315/80 R 22.5; Twin tires; Max. axle load: 13,000 kg; Reduction: External planetary axles; Suspension: Air suspension Weights Payload: 500,000 kg GVW: 41,000 kg Functional Body brand: Mercedes Condition Technical condition: very good Optical condition: very good Nsdpfouu E T Aex Af Sedb Financial information Price: On request

Condition: excellent (used), mileage: 577,458 km, first registration: 01/2013, fuel type: diesel, axle configuration: 8x4, wheelbase: 3,900 mm, fuel: diesel, brakes: retarder, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, total length: 7,630 mm, total width: 2,500 mm, Year of construction: 2013, Equipment: ABS, air conditioning, cruise control, electric window regulation, fog lights, power mirror, retarder, soot filter, spoiler, trailer coupling, = Additional options and equipment = - Aluminum fuel tank - Leaf suspension - Roof spoiler - Low noise - Speed limiter - Refrigerator - Air horn - Particulate filter - Rear-view camera - Sleeper cab - Sun visor - Stability control - Toolbox - Power take-off (PTO) - Towing hitch = Additional information = Technical details Number of cylinders: 8 Engine displacement: 15,928 cc Unladen weight: 13,689 kg Axle configuration Front axle: Steered Rear axle 1: Steered Rear axle 2: Twin tires Rear axle 3: Twin tires Condition Technical condition: very good Visual condition: very good Financial information Price: On request Ndedpfxouxrwds Af Ssb Identification Registration number: 27-BBL-9 MERCEDES-BENZ 4165 V8 8X4 SLT TITAN HEAVY DUTY TRACTOR UNIT EURO 5 L PACKAGE (CAN ALSO BE CONVERTED TO EURO 3 FOR EXPORT) V8 ENGINE 650 HP DRIVE 8X4 LEAF SPRUNG WHEELBASE 390 CM DIFF LOCKS ADJUSTABLE SADDLE PLATE 3.5 INCH + TRAILER COUPLING HYDRAULICS FOR TRAILER LARGE 900 LITER TANK BEHIND CAB AUTOMATIC TRANSMISSION WITH VIAB TURBO RETARDER CLUTCH (TORQUE CONVERTER TURBO CLUTCH) RETARDER PUSH AND PULL 250,000 KG FRONT PLATE FOR HEAVY DUTY COUPLING EXTRA COOLING PACKAGE FOR VIAB TURBO RETARDER CLUTCH EXTRA OIL AND AIR CONNECTIONS FRONT AND REAR MULTIPLE TOOLBOXES CAB FULLY EQUIPPED WITH AIR CONDITIONING, REFRIGERATOR, CAMERA FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: new, Ruchsr Assembly line consisting of: Ndjdpfx Afsd Ih Hus Sjb Item 1.0 / RU-CBM 4000 work table with running rail extended by 500mm for additional assembly an aluminum holder screwing machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table Length 4000 mm, width 1400 mm, inclination of the working platform manually adjustable. Holder for fitting scissors or fitting punch. 16 pieces of swiveling counter-holders for hanging the wings, completely pneumatic Foldable for unhindered movement of the wings on the table surface. Device for scanning the sash fitting length for constant and variable/central gear seat for already drilled wings, colored Dimension recognition of the fittings. RU-SH, special screwdriver with pneumatic depth switch on carriage mounted, safety control, pneumatic height adjustment, Screw feeder with automatic shutdown of the filling container (Manual insertion for a second screw length on the special screwdriver upon request). RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4, turret stop for 4 different wing widths Swivel table mounted. Pneumatic wing measurement sensing. operated, scanning range up to 2500mm simultaneous clamping of the scanning. PSF - Pneumatic tensioning device for sashes. Working height adjustable from 900 - 1000 mm. Support table covered with felt. Running rail extended to the left by 800 mm. Item 1.1 / 5035-1 Pneumatic swivel device of the work surface with foot valve Item 1.2 / 0500000 Holder matched to customer punch/scissors. For mounting a hardware punch provided by the customer or Fitting shears (third-party manufacturer) on the sash assembly table. Please specify make when ordering!!! Item 1.3 / 5597-7 Driving device for RU-CBM on semicircular rails. The castors are on the left and right of the base frame of the table mounted. Item 1.4 / 6354-6 3 double meters of semicircular rails 30 x 10 mm. Item 1.5 / 0730000 RU-SBL3000/40 free-standing fitting bearing, Length 3100 mm, depth 1250 mm, height 2200 mm, Stand frame on the front without supports, 40 compartments, divided into 10 compartments in a row by dividers and a continuous shelf at the top, Compartment size: width 280 mm, height 150 mm. Item 2 RU-CSA-SMB aluminum holder screwing machine with automatic Screw feeding and manual feeding of the aluminum holders from one traveling box with pneumatic positioning device, Screwdriver with depth cut-off with 4-fold turret stop. Pneumatic adjustment device in the y direction against 2 pieces 6-fold Revolver attacks. Feed container for manual feeding of rotary holders or clip holder in square shape 18.5 x 18.5. The holder is manually pushed into a channel in the box and with positioned in front of the screwdriver mouthpiece using a pneumatically operated slide. Profile depth max. 150 mm, screw spacing in the y direction max. 120 mm. Item 3 RU-S48-A6-350 column slewing crane for chain hoist, with 6 m aluminum boom Version with column, smooth-running boom and sliding chassis for swivel and trolley travel manually by pulling and pushing the load. Projection 6 m Construction height 4,461 m Lower edge of boom 3.722 m (top edge of boom 3.9 m) Swivel range max. 270° Painting of the steel construction in RAL 7035 The base plate is attached to the on-site hall floor At least 250 mm thick. Designed, of course, according to the valid STANDARD EN 13155...

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: A7879, functionality: fully functional, pressing force: 70 t, overall weight: 3,000 kg, opening width: 400 mm, TECHNICAL DETAILS Heating temperature: 70 - 100 °C Total pressing force: 70 tons Specific pressing force: 2.5 - 3.5 kg/cm² Opening width: 400 mm MACHINE DETAILS Control: Push-button control for opening, closing, and stopping Drive: Electro-hydraulic Heating plates: Aluminum Ndodpfx Aezktpqef Sjb Dimensions of heating plates: 2,550 x 1,100 mm Heating: Electric Hydraulic cylinders: 4 Diameter of hydraulic cylinders: 80 mm Rated voltage: 380 V Type of current: 3~ Frequency: 50 Hz Control voltage: 220 V Rated current: 21 A Power: 13.6 kW Dimensions & Weight Transport dimensions: 2,900 x 1,400 x 2,000 mm Weight: 3,000 kg EQUIPMENT Safety pull cord Pressure monitoring (automatic adjustment) Adjustable limit switch for specific opening width

Condition: excellent (used), Year of construction: 2004, operating hours: 88,926 h, functionality: fully functional, machine/vehicle number: 194501, clamping force: 600 kN, screw diameter: 25 mm, clearance between the columns: 370 mm, overall weight: 2,930 kg, Equipment: documentation/manual, We are selling a very well-maintained 370C. The machine is connected to the power supply and can be inspected at any time. Ndodpfxoz Dq I Uj Af Sjb 1x core pulling unit, hydraulic, Drop-off switch, Handling interface EM67

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Njdpfofy Txysx Af Ssdb Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: used, power: 18,499 kW (25,151.61 HP), fuel type: diesel, color: other, Year of construction: 1978, Number of cylinders: 6 Empty weight: 165.000 kg Width: 127 cm Track width: 12,7 cm Serial number: GS18972 Hour meter reading: 1,442 h Boom length: approximately 37,000 mm Fairlade Tagline Krüger Mark 4E/2 digital operator console Main drum pulling force: 20,000 kg Independent travel and swing Track width: 1,270 mm Engine: Cummins Diesel Engine type: NT855 P-310, Twin Disc three-stage torque converter Engine power: 251.51 kW Number of cylinders: 6 Operating weight: 165,000 kg Remarks: signs of use Dimensions (on-site): approximately 10,000 x 5,850 x 5,500 mm Online auction of drilling, foundation and heavy construction equipment, including a 2014 COMACCHIO MC28 HT multifunctional ground drilling rig, 1992 KLEM KR806D horizontal drilling machine, 1977 AMERICAN HOIST 9299 dragline, NOBAS UB35S and NOBAS UBI254 draglines, and a 2001 LIEBHERR A310B wheeled excavator. The machines originate from a foundation and marine construction environment and are suitable for contractors, drilling and piling companies, crane and dragline specialists, exporters, resellers and buyers of heavy construction machinery. Nodpfoz Df R Rex Af Ssdb The online auction opens Thursday 17 September and closes Tuesday 6 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 2 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Nsdpfxez Enbbj Af Sodb Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: TZ-JRT-30B-2800, Automatic log-cutting machine for toilet paper and hand towel cutting Fully automatic operation with advanced PLC control, LCD touchscreen, and servo motor. The machine is designed to minimize manual intervention, reduce labour requirements, and improve operator safety. The main operating parameters are set directly via the touchscreen PLC. The machine can be integrated with a converting and rewinding line for more efficient production. Designed for long-term industrial operation. Major components are imported, with the remaining components sourced from quality Chinese manufacturers. Technical Specifications Cutting diameter: 130–250 mm, adjustable via PLC Cutting length:50–380 mm, adjustable via PLC Maximum log length: 2,750 mm, adjustable via PLC Log lengths: Adjustable via PLC Cutting speed: Manually adjusted according to log diameter, thickness and cutting length Nedpfx Aozxnmyjf Sedb Maximum stable operation speed: Up to 20 cuts/min for logs below 210 mm diameter and cutting lengths of 50–220 mm For cutting lengths above 220 mm: Automatic speed adjustment to approximately 10 cuts/min Automatic blade sharpening Automatic log loading/pick-up table Log storage rack with automatic feeding Automatic waste/reject removal via mechanical pusher (if using the push hand) Electrical connection: 3 × 400 V, 40 A Compressed air: 0.6 MPa Machine dimensions: 3,500 × 2,500 × 2,000 mm Weight: Approximately 3,000 kg (2 parts, cutter and the mechanical pusher) Country of manufacture: China Machine Condition The machine has been in operation at the factory and has been running without any major issues. Installation year 2020, running conditions about 7hrs /one shift. The following maintenance/repairs have been carried out: * Upper drive bearings replaced (2025) * Lower drive bearings replaced (2026) * Drive belts replaced (2026) * Damaged motion-control wiring repaired/replaced (2026) * Every 3-month inspection * Every 6-month lubrication of moving parts The machine is currently dismantled and stored in a dry warehouse. It can be inspected in its dismantled condition. Spare Parts Included Band saw blades: 4,400 × 70 × 0.65 mm price €105/pc, 9 unused blades, 1 sharpened and ready-to-work condition blade, 1 sharpened and ready-to-work blade (width narrow, still can cut most of the articles) Diamond grinding wheels: €80/pc, 1 spare New dust collector/vacuum system: €1,100 - purchased new but never installed (2-way suction and 1-way blown-in, with collection bin, direct attachment to the cutter) Other Information * Made in China - technical support within 24 hrs, spare parts in about 2 weeks. * Automatic operation * PLC + LCD touchscreen control (screen has original protection film still attached) * Servo-driven system * Suitable for toilet paper and hand towel logs * Suitable for integration into a converting/rewinding production line * Machine dismantled for storage Export outside the Baltic States Inspection possible by prior arrangement. Videos: youtu.be/8-xRCmvARYM youtube.com/shorts/vU4EunMEQt4 youtube.com/shorts/wwuV2Gp30AY youtube.com/shorts/WZjjokJjgZY

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: BASIC MACHINE DYNESTIC 7507 10.7_Push Machining length 3100 mm (without tools) Machining dimension in the Y-direction 2200 mm CAMPUS V7 CAD/CAM software, 1 license incl. CabinetControl Base and material removal simulation upgrade "CAMPUS ""Better Nest"" free-form nesting software" Uninterruptible power supply (UPS) Milling spindle 7830, power: 10.3 kW (S6/40) Sensor package Chipcontrol for 3-axis spindle incl. receiver 7884 Drilling unit, complete, 14 spindles, drive power 3 kW Integrated sawing unit for sawing/grooving in the X-direction n(max.) 1000-7330 min-1, continuously adjustable 1 stop bar at the rear for the machining area (field D) at the rear with 1 lateral stop (replaces lateral stops at the rear) Stop monitoring for 5 standard stops at the rear and on the right Tool changer 7873, 6-position linear pick-up, pneumatically liftable with cover for the HSK tool holders, integrated 2 additional holders for HSK tool holders for the tool changer 7873. Tool changer 7872, 1-position tool magazine, swiveling in the X and Y directions 2 x vacuum pump 140 m³/h, dry-running Vacuum unit complete, (VP8) 250 m³/h, 400V additionally (upgrade) Vacuum connection complete, 16-circuit vacuum VF16 LASER, RIGHT COMPLETE POINT LASER COMPLETE OPTION ZB8 Lubrication complete, central lubrication, sensor side 2 x vacuum suction cups for smooth table surfaces, complete, 140 x 115 mm, height 30 mm with connection hose 2 x vacuum suction cups for smooth table surfaces, complete, 120 x 50 mm, height 30 mm with connection hose Conveyor belt complete, push-out conveyor AUT 5 10.7, push-out table Additional extraction system via push-out conveyor Push-out device on the moving carriage, controlled incl. simultaneous extraction of the wear plate Nedpfx Afjygn Ibs Sjdb Label printer Direct Label 7507 and complete touch label light option ZB74 TouchTool tool length measurement Availability: From approximately December 2026 Location: Bavaria

Condition: excellent (used), mileage: 350,000 km, power: 552 kW (750.51 HP), first registration: 04/2014, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 3,900 mm, fuel: diesel, fuel tank capacity: 700 l, brakes: retarder, color: yellow, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: steel-air, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2014, Equipment: AdBlue, retarder, = Additional Options and Accessories = - Leaf spring suspension - Television - Refrigerator - Radio/CD player - Radio/cassette player - Sleeper cab - Power take-off (PTO) = Notes = Transmission model: Volvo I-Shift Color: Yellow Wheelbase: 390 cm Payload capacity: 200,000 kg Manufacturer: Volvo Type: FH 16 750 8x4/4 Heavy Haulage Tractor VIN: YV2RZZ0D7EA759630 Year: 2014 Odometer: 350,000 km Engine: 750 HP / 16.1 l Diesel / Euro 5 / SCR / 3350 Nm / Retarder Transmission: Volvo I-shift / Automatic / 12 gears / VEB+ First axle: 10,000 kg / Leaf suspension / Tires 385/65R22.5 Second axle: 9,000 kg / Air suspension / Steered / Tires 385/65R22.5 Third axle: 13,000 kg / Steel suspension / Driven / Hub reduction / Tires 315/80R22.5 Fourth axle: 13,000 kg / Steel suspension / Driven / Hub reduction / Tires 315/80R22.5 Wheelbase: 3900 mm GVW: 45,000 kg GCW: 200,000 kg Equipment: LED working lamps 700 L Diesel Tank AdBlue tank 90L Sliding frame, pneumatic SAF SK-HD 38.36: D=260 PTO Hydraulics Hydraulic tank 100L Orange warning beacon Heavy push coupler at front Extracting lights for oversize load EBS Large cabin Toolboxes mounted Cabin: Tachograph, EC approved Ndodpfsuu Hc Sjx Af Seb Storage boxes Bed Radio / USB / Bluetooth Extra layer of cabin insulation Roof hatch TV Microwave Pull-out refrigerator Leather seats Fire extinguisher = Additional Information = Transmission Transmission: Volvo I-shift, 12 gears, Automatic Axle configuration Front axle: Tire size: 385/65R22.5; Max. axle load: 10,000 kg; Steered; Suspension: Leaf spring suspension Rear axle 1: Tire size: 385/65R22.5; Lift axle; Max. axle load: 9,000 kg; Steered; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Max. axle load: 13,000 kg; Reduction: External planetary axles; Suspension: Leaf spring suspension Rear axle 3: Tire size: 315/80R22.5; Twin tires; Max. axle load: 13,000 kg; Reduction: External planetary axles; Suspension: Leaf spring suspension Weights Unladen weight: 13,580 kg Payload: 200,000 kg GVW: 45,000 kg Condition Technical condition: very good Optical condition: very good Damage: none Financial information Price: Upon request