Used Plastic Film Wash Line With Extruder Wash Line With Extruder for sale (18,097)

Condition: reconditioned (used), machine/vehicle number: 2586k, No.: 2586k 1 used, functionally tested and operating compounding-pelletizing line, equipped with : Extruder twin-screw COMAC Type EBC 68 with Motor 110 kW-DC screws 2x Ø 68 mm – 40 L/D co-rotating intermeshing Segmented screws & cylinders, Water / Medium cooled 1x venting port 1x side feeder screws 2x Ø 52 mm Melt-filter 2 piston Type K-SWE 160 incl. Hydraulic-pack BKG underwater-pelletizing unit Type AH 2000, complete with: diverter-valve / Hydraulic pelletizer with motor 4 kW incl. die-plate and knife-holder Water – Box TWS volume 900 liter, heating power 40 kW Installed Water pump with 11 kW, By-Pass-System Pellet Spin-dryer TVE 2000 ED with motor 4 kW water sieve with circulation pump 4 kW Siemens S7 – Touch control board Dsdod H S U Uopfx Albecl More extruders / recycling - and compounding lines ex our stock Wuppertal-Germany available, as: pelletizing systems, dosing & blending, screen-pack-changer, pellet classification, granulating and many more. Ask for our most recent stock-list or visit us in Wuppertal-Germany. You´re welcome.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Dcjdezti Tkjpfx Albol Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. This equipment has very few operating hours.

Condition: used, GS Mach approx. 6.5" extruder with Water Ring Pelletizer, with Water Ring Pelletizer, spin dryer, screen changer, and hopper, includes all control panels, 177 HP, 3 phase motor, also includes Color Feeder, in working condition, winning bidder responsible for proper disconnection and removal. Dcodpjxd D Nnsfx Albsl

Year of construction: 2026, condition: new, functionality: fully functional, The PR8 pre-washer is designed for intensive pre-washing of plastic waste in recycling lines. The machine removes sand, soil, and mechanical contaminants, preparing material for further washing stages. Suitable for continuous 24/7 industrial operation. Materials: PE, PP, HDPE, LDPE, plastic films, post-production waste Technical data: Dodpfx Aeyh Hr Eolbecl Capacity: up to 2000 kg/h Drive power: 30 kW Rotor length: 3000 mm Rotor diameter: 680 mm Dimensions (L x W x H): 3689 x 1766 x 3294 mm Inlet opening: 500 x 450 mm Features: Heavy-duty industrial construction Replaceable wear parts Easy service access Ready for integration into complete washing or recycling lines 📩 Available in customized configurations. Contact us for details.

Condition: excellent (used), Year of construction: 2022, Multihead Weigher & Pouch Bag Filling / Sealing Line. Can mix three different products of different weights in the one pouch bag. Consisting of the following. 24 head weigher, sus304, 3-mix, 3 top cones, 100 degree flat chute, 2.5L dimple plate, touchscreen, photo sensor Pouch Machine Change Parts Gantry with stairs Dcedpfx Aovw Egrelbol 3 infeed elevators Ice Viper Printer Set of wash walls to suit 2 x Cross feed conveyors All manuals and spare parts included Can be seen running In excellent condition

Year of construction: 2018, condition: not inspected (used), machine/vehicle number: 4336155, Conveyor dishwasher/dishwashing system, manufacturer: Colged, type: Toptech, serial number: 4336155, year of manufacture: 2018, machine designation: T302GJDQX2, power: 40.09 kW, with dosing system, manufacturer: Etol, type: D4R2, operating temperature: 10 - 60 degrees Celsius, discharge unit, digital display. Dedpfx Aljzw Dbqjbjcl

Condition: used, Polymer Recovery, Dremel Style plastic washer and spin dryer vibratory screener, gas blower system, sink float tank and feed hopper with augers, feed hopper will need to be removed from I-beam frame, unit is bolted and welded to frame (does not include lower I-beam frame), includes all control panels, winning bidder responsible for proper disconnection and removal of machine. Dcjdsxd D I Rjpfx Albjl

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. Dcodszrg T Espfx Albel *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: new, functionality: fully functional, Offered for sale is a semi-moist pet treat production equipment set based on a twin-screw extruder, designed for continuous forming, portioning, and cooling of semi-moist products. The line has been dismantled and is ready for shipment. It was purchased from a supplier and not used in production, but the configuration is equivalent to machinery currently operating in active plants for semi-moist pet treat manufacturing. Dcsdpfx Aleycfw Esbel This system addresses the key process steps that define semi-moist product quality and handling: stable solids dosing into the extruder, controlled shaping and cutting, as well as staged cooling to stabilize texture and reduce sticking or deformation before packaging or further processing. The extruder is of twin-screw design and has achieved production capacities of up to 150 kg/h, depending on recipe and configuration. Product shaping is highly flexible and can be adapted to a variety of product formats; it is suitable for dental sticks, hearts, bones, sticks, strips, and other geometries depending on the die/forming set and cutter configuration. The configuration line has been used for high meat meal or grain-free semi-moist treats as well as vegetarian-type items; final product characteristics depend on recipe, moisture targets, and process parameters. Dry base components are supplied using a volumetric or mass-based dosing feeder, feeding directly into the extruder. This enables steady extrusion and consistent shaping. Downstream portioning is performed with a rotary knife cutter fitted with specialized inserts for clean cutting of semi-moist products. Cut length can start from approx. 5 mm and can be adjusted as required; achievable range depends on settings and the cutter head. The cutter head concept is flexible and can be adapted or redesigned depending on desired final product and surface finish for different shapes and recipes. After forming and cutting, product is conveyed through an initial cooling section with a fan, followed by a conveyor cooler for further stabilization. Cooling is based on ambient forced air, with cooling performance managed by conveyor speed (residence time) and airflow. This two-stage cooling process is optimal for semi-moist products, helping to prevent clumping, deformation, or marking during handling and transport. A notable feature of this line is the mixing head at the extruder outlet, which supports improved mixing and temperature control and enables production of two-color treats (application dependent). The sale also includes the liquid handling package used in semi-moist processing—stainless steel pumps and tanks for water, fats/oils, glycerol, and other typical process fluids. All liquid handling components are stainless steel, meeting hygienic production standards.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, DESCRIPTION: Complete production process: hydraulic uncoiling, guided feeding, roll forming, hydraulic post-cutting, and automatic run-out/stacking. Profile-specific tooling for TR153 / 290 / 870 high-profile sheets. Full mesh safety guarding around the main forming section. Siemens PLC/HMI control and Schneider frequency-controlled main drives. Profile: TR153 / 290 / 870 Standard sheet thickness: 0.70-1.50 mm Feed coil width: 1,500 mm Overall / effective width: 900 mm / 870 mm Profile height / pitch: 153 mm / 290 mm Maximum profile length: unlimited Dcodezvaibspfx Albel Working speed: 15 m/min Location of the line: Serbia

Condition: excellent (used), LINE of packaging with cardboard. Capacity: 6–8 boxes per minute. Packaging line for furniture components, featuring manual, continuous filling of the boxes with furniture parts, automatic hot-melt adhesive sealing, and automatic unloading by KUKA robot. The line consists of: a) Infeed roller conveyor Dcsdpfjzxn U Dsx Albjl b) Stretch wrapping machine (plastic film), ROBOPAC, Model Orbit 12 c) Carton box forming machine, AUTOMATECH ROBOTIK d) Hot-melt adhesive gluing machine, DYNATEC, Model DynaMelt e) Printer, LIMITRONIC, Model V L 780 SE R 1 R3 1 ES f) Vacuum handling system, PROTUBE HANDLING SOLUTIONS g) Robot, KUKA, Model KR C4 NA UL

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Djdpfxoi Dtbuo Albjcl Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Year of construction: 2013, condition: used, functionality: fully functional, Equipment: CE marking, "Dual drying system with compressed air expansion + molecular sieve treatment - Weekly timer - Anti-stress system - Compressed air flow rate: 7 - 20 Nm3/h - Maximum temperature: 180 °C - Dew point: -50 °C - Total power: 1 kW - Power supply: 230 V - 50 Hz Dsdpjzlxq Nsfx Albscl - Hopper capacity: 50 dm3 - Compressed air pressure: 6-8 bar - Weight: 23 kg"

Year of construction: 2010, condition: good (used), Granule dryer, granule drying system, granule conveyor, vacuum conveyor, vacuum station, drying container, vacuum suction conveying system, vacuum suction device, vacuum loader, hopper loader Dodpfsy R S Twox Albjcl -Manufacturer: Plastic Systems, granulate conveyor vacuum suction conveying system -Type: PD2-40 FC1 -Side channel blower: Elmo Rietschle -Individual components: see photos Quantity: 1 piece available -Dimensions: 530/520/H1120 mm -Weight: 56 kg

Condition: good (used), 1 x Carrot Line and Grader system Can also be used for potatoes, onions, beet root and brussel sprouts etc. System will be coming out of production end of May/early June. All equipment has had a full service and checked over during the spring period for the coming year. Haith Screen Bits Remover. The Screen Bit Remover continuously removes broken fragments of crop and debris from the produce flow. Carrots are transferred onto a traveling screen with a set size aperture. As the screen is conveyed forward, two full-width agitators gently move the crop causing any bits and debris to drop on to a waste conveyor below where the produce is taken over the end. The screen and agitator speeds are variably controlled individually to suit the various crop conditions. Grader / sorter Odenberg Titan 2 automatic camera grading system – installed in 2008. Titan 2 Sorter 6002.2, 3-way carrot sorter. The first sorter removes product that is not usable, damaged etc to the waste line. The second sorter removes short carrots, twisted and misshaped which are sent directly to the value tank. All the rejects go through the positive sorting area and the grading operative throws back any product that is fit for value sale. High capacity and low maintenance sorting machine Flexible sorting machine with gentle handling assured Quality control and feedback accessible through intuitive touch screen Consistent long-life accuracy. Grading Station. The grading operatives throw out any unusable product to the waste line via the positive grading area. Two to four graders can operate here depending on the quality of the produce. Wyma Lift Roller Sizing Grader – installed in 2019 The product is divided into five grades. 500g, 0-25mm, this goes to the value tank. 1kg, 25 – 42mm max. Djdev I S D Sspfx Albscl Loose min 30 – 45mm max. Lumpers, min 45mm upwards. Oversize. The Wyma Lift Roller Sizer is a diameter grader suitable for a wide range of fruits and vegetables including carrots, potatoes, parsnips, beets, citrus, onions, bulbs, brussel sprouts, rutabaga and other round or tubular products. It is extremely versatile, offering multiple size outputs at high capacity in one machine. It can cater for a large range of product sizes and shapes through a selection of different roller options. Product size ranges, or size bands, are created by adjusting the spacing between the rollers, at defined locations, along the length of the machine. The Lift Roller Sizer is made from stainless steel and food-grade plastic materials. Five Lift Roller Conveyors. All supporting framework available. *Video available on request* Located in Wexford, Ireland. Buyer to collect – machinery will be dismantled and loaded to your vehicle. UKFM2-6653

Condition: used, The Braibanti/Pavan extruder is designed for the continuous production of short-cut pasta, breakfast cereals, and pet food. The prepared dough is conveyed through a temperature- and moisture-controlled screw extruder toward the die, which ultimately defines the shape of the product. Extrusion takes place under controlled pressure and temperature to ensure consistency and structural integrity. At the end of the extruder, a motorized, speed-controlled rotating knife cuts the extruded product to the desired length. Prior to extrusion, the dough undergoes a structured preparation process. It begins with a two-step mixing system that combines dry and wet ingredients into a homogeneous mass. This system uses a single mixing arm with directionally adjustable paddles to ensure proper pre-conditioning and hydration. The final stage of preparation takes place in a high-performance mixer/kneader unit, which further develops the dough structure to achieve optimal plasticity, consistency, and elasticity-critical parameters for stable and high-quality extrusion performance. Continuous mixer - preconditioner PR210 ± 120L / screw Single mixing shaft with adjustable paddles, dual execution Motor 2 x 15 Kw - 970 rpm Liquid and dry ingredient supply Inspection and cleaning hatch Mixer VM210 ± 300L Single mixing shaft execution with adjustable paddles Motor 3 Kw Extruder BR210 Dual execution, 2 extrusion heads Motor 2 x 37Kw - 1482 rpm Gearbox Sumitomo Cyclo Double-walled extruder housing, suitable for cooling Production capacity (Pet food) calculated at 30-40 kg/min (depending on the product) Operating pressure ± 30-40 bar depending on the die Powered cutting head/chopping knife (motor 1.1 Kw -920 rpm) Dcsdpfjzzat Rex Albel Dimensions (L x W x H): 5.000 x 2.200 x 2.400 mm without electric cabinet and controls

Condition: good (used), Tray wash machine, direct from recently closed ‘meat-free’ factory. In lovely condition. Dsdpfx Alsrfdq Uebecl

Condition: new, Year of construction: 2026, operating hours: 8 h, functionality: fully functional, machine/vehicle number: 16102025, total length: 14,000 mm, total width: 4,000 mm, total height: 3,030 mm, overall weight: 3,000 kg, input voltage: 220 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 14 bar, compressed air connection: 6 bar, input current: 12 A, temperature: 10 °C, heating capacity: 3 kW (4.08 HP), power: 6 kW (8.16 HP), warranty duration: 12 months, operating pressure: 14 bar, control type: PLC-controlled, degree of automation: automatic, Equipment: CE marking, documentation/manual, lighting, The KEG barrel is manually placed on the conveyor with the top down. On the control panel, the type of KEG barrel to be worked with is set and started with the “START” button. The conveyor chain also acts as a buffer - for three 30L KEG or five 10L KEG barrels. When the barrel enters the washing machine, the conveyor stops and the washing is started. The machine consists of 2 zones - washing with chemicals and the second for rinsing. The first (longest) processing zone is used for the main cleaning with chemicals. The second zone is used for rinsing. Spray pipes are fixed in each spraying zone. Along the sides, bottom and top to ensure the cleanliness of the specified Keg barrels. Washing with chemicals and adjusting the amount of its supply, as well as without chemicals, is possible. Drive rollers ensure the fixation of the barrels and their rotation during washing, brushes wash the sides of the KEG barrel, the arrangement of high-pressure nozzles ensures water supply to the brushes and washing of the bottom of the barrel. Washing of one barrel max. 1.5 min., this time can be changed depending on the degree of dirtiness of the barrels. Excess water is drained into the sewer through the overflow. After washing, the barrels are fed to the filling machine with elevators. A sensor on the line near the filling machine controls the operation of the line. If the sensor is covered, the barrel feed is stopped and is automatically resumed when the space becomes free. If at this moment the barrel is in the washing machine - the cycle is completed. If the space near the filling machine is free at the end of the washing cycle, the feed continues. If not - the barrel feed line is in standby mode. Ventilation is built into the washing machine body. Dodpfx Aljv Di Dnebscl Control panel: SIMATIC HMI, KTP400 Basic Controller: SIMATIC S7-1200, CPU 1214C Pump water output: Q min/max 5-13m3/h Chemical dosage – adjustable on the control panel Material used: stainless steel AISI 304 Cylinders: FESTO 2. Elevators: for KEG barrels Stainless steel frame Separation and ejection mechanism – pneumatic cylinders (FESTO) Chain – stainless steel • Dimensions and specifications are to be specified at the time of ordering. You can El. diagrams and drawings are submitted upon delivery of the equipment. Warranty – 12 months from the moment of signing the invoice CE Certificate

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Washer for plastic cans and bags Dcedpfx Alowxy Hzjbol Brand: Boldt Systems Model: W 400.4.3.1 Serial number: BW0 04 122 Year of manufacture: 2005 Steam heated Stainless steel mesh belt Belt width: (3x) 380 mm Overall dimensions: 6000 mm x 2100 mm x 2400 mm

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 36AMN, compressed air connection: 6 bar, working width: 360 mm, warranty duration: 12 months, operating speed: 420 mm/s, Komfi Laminator Amiga 3680 with HotKnife (NearLine, Generation 1) Showroom Machine, Manufactured 2025 Specifications: Min. paper format: 200 x 250 mm Paper weight: 115 x 600 g/ m2 Thickness of sheets max. 0,7 mm: Overlap > 0 Thickness of sheets max. 1,4 mm: Overlap < 0 Suitable kinds of film: Polypropylene, Polyester, Nylon Film thickness: 24-50 μm Inner diameter of film reel: 3“ = 76,2 mm Outer diameter of film reel: 350 mm Output / laminating speed: 3-25 m/min(regard. technological conditions) Maximum output: - Average monthly capacity of machine: 100 000 B2 sheets Max. paper pile: 60 mm / length of sheet < 350 mm 30 mm / length of sheet > 350 mm Max. feeding table load: 20 kg Laminating temperature: according film manufacturer – max. 135°C Sheet overlap tolerance: ±1 mm Max. pressing force (0,6MPa): 15 kN Max. pressing force (0,8MPa): 19,5 kN (WARNING = limited life of the pressure roller) Dcjdpfxszh S Uge Albjl Max. linear NIP pressure, press 0,6 MPa: 60 N/mm / sheet width 250 mm 50 N/mm / sheet width 300 mm 41,6 N/mm / sheet width 360 mm Linear NIP pressure= 30 N/mm: sheet width 250 mm / 0,30 MPa sheet width 300 mm / 0,36 MPa sheet width 360 mm / 0,43 MPa Feeder: Bottom Suction Vacuum Feeder Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: good (used), functionality: fully functional, Year of construction: 2007, including Sheetmaster, Gripmaster, and Toolmaster Dcodszr Ha Eepfx Albjl Year of manufacture: 2007

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 9,000 kg, cutting height (max.): 1,200 mm, cutting width (max.): 1,100 mm, roll diameter: 1,400 mm, total width: 2,100 mm, total length: 2,400 mm, input voltage: 220 V, saw band length: 10,450 mm, saw band width: 206 mm, power: 90 kW (122.37 HP), empty load weight: 19,000 kg, cutting speed: 40,000 mm/min, Equipment: cabin, We are selling a complete sawmill line with a VTZ 1400 PLUS vertical band saw from Mebor. Dcjdpfexq Rgysx Albsl The offer includes: - VTZ 1400 PLUS vertical band saw by Mebor - Heavy-duty log conveyor with loading arms - Log edger/canter BM900 by Mebor - Operator cabin for the vertical band saw - Roller and chain conveyors - Edging line VR800 S by Mebor with servo-driven, high-speed circular saw positioning - Twin-shaft multi-blade circular saw VC 900 D by Mebor - Waste conveyor line - Chipper shredder for waste TH200/500/3 by Rudnick & Enners - Sorting line 47-14 by Holzmatic

Year of construction: 1999, condition: good (used), Control or regulator card, type ETR 51. The circuit board was manufactured by Plastic Service GmbH. Dcsdpfx Alezl T S Ujbol 11 pieces available.

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Dodpfx Aji Akrkslbecl Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Condition: excellent (used), Year of construction: 2017, Working width: 3 meters Djdpfozq A Ipex Albecl Pressing force: 130 tons