Used Pedrazzoli Bend Master 42 Cnc 6 Axis Ims for sale (63,359)

Condition: used, machine/vehicle number: 008480, X axis working area: 4600 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 18 KW Number of controlled axes: 5 axes Fpsdpfey Edqkex Alxjh Total number of drilling spindles: 31 Total number of tool changer positions: 58

Condition: used, machine/vehicle number: 008496, X axis working area: 5920 mm Fedpjy H Dzfofx Alxjph Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 16.5 KW Number of controlled axes: 5 axes Total number of drilling spindles: 23 Total number of tool changer positions: 34

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,200 mm, total length: 3,200 mm, total width: 2,400 mm, table width: 600 mm, table length: 600 mm, table load: 500 kg, rotational speed (max.): 20,000 rpm, spindle motor power: 18,000 W, number of slots in tool magazine: 30, 5-axis CNC machine (VMC) MIKRON - UCP 800 MACH-ID 9640 Make: MIKRON Type: UCP 800 Control: HeidenHain iTNC530 X - Travel: 800mm Y - Travel: 650mm Z - Travel: 500mm A - Axis: +120 to -100° B - Axis: 360.000° Table Length: 600mm Table Width: 600mm Table load: 500 Feed rate X-Axis: 30000mm/min. Fedpfezbqy Nox Alxoph Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: HSK63ISO/Bt/Mk Power on spindle: 18kW Speeds / ranges: 20000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: yes Coolantsystem: yes Length: 3200mm Width: 2400mm Height: 3200mm Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2009, KUKA KR 210 L150-2 2000 6-Axis Robot The KUKA KR 210 L150-2 2000 (Series 2000) is a high-performance 6-axis industrial robot specifically designed for extended reach combined with a high payload capacity. The "L150" designation indicates the extended arm (Long version), which increases the maximum reach to 3,100 mm, while the rated payload is 150 kg. Key Technical Data Fsdpfx Aljzcwxuoxoph Maximum reach: 3,100 mm Rated payload: 150 kg Supplementary load (arm/link arm): 50 kg / 100 kg Number of axes: 6 Repeatability: ± 0.06 mm Weight (excluding controller): approx. 1,285 kg Protection rating: IP65 (standard) Mounting position: Floor Axis Data (Motion Range & Speed) The Series 2000 features high-torque drives that ensure high dynamic performance despite the extended arm length: Axis 1 (A1): ±185° | Max. speed: 86°/s Axis 2 (A2): +90° to -61° | Max. speed: 84°/s Axis 3 (A3): +65° to -209° | Max. speed: 81°/s Axis 4 (A4): ±350° | Max. speed: 100°/s Axis 5 (A5): ±125° | Max. speed: 110°/s Axis 6 (A6): ±350° | Max. speed: 184°/s Typical applications Thanks to its large working envelope and load capacity, the manipulator is ideally suited for: Long-range material handling and palletizing tasks. Milling and machining applications (e.g., component trimming). Spot welding and handling in automotive production. Additive manufacturing and large-scale 3D printing. "A complete solution: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—both new and used—in our shop! International shipping costs on request!

Year of construction: 2026, operating hours: 7,000 h, condition: used, We offer this used CML Finishing Ghost C Master CML Ghost 6 axis robot painting line, year of construction 2018. Including: 1pcs Master CML Finishing Ghost C robot 1pcs Slave CML Finishing Ghost C robot 1pcs 3D Scanner with dimensions and depth scanners 2pcs Control cabinets with monitors Fpjdoyx Sv Ujpfx Alxoh 1pcs Graco Premier 800 pump 5pcs Graco G36W05 pumps 1pcs Belmeko Spray booth with exhaust and return air system If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, machine/vehicle number: 008184, X axis working area: 8185 mm Y axis working area: 1550 mm Fedpfxjyxmv No Alxsph Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of tool changer positions: 22

Condition: good (used), KUKA KR 240 R2900 ultra Industrial Robot The KUKA KR 240 R2900 ultra is a high-performance 6-axis industrial robot from the renowned KR QUANTEC ultra series. It features a high payload capacity of 240 kg and a maximum reach of 2,896 mm. The model was specifically designed for demanding, heavy-duty industrial automation tasks. Key Technical Data Rated payload: 240 kg Maximum total load: 290 kg Maximum reach: 2,896 mm Number of axes: 6 Pose repeatability: ± 0.06 mm Weight: approx. 1,145 kg Mounting position: Floor Protection rating: IP65 (central wrist IP67) Controller: KUKA KRC4 Axis Motion Range The axes offer a wide range of motion for maximum flexibility within the workspace: Axis 1 (A1): ± 185° Fpjdpfezcqh Aex Alxeh Axis 2 (A2): -140° / -5° Axis 3 (A3): -120° / 155° Axis 4 (A4): ± 350° Axis 5 (A5): ± 122.5° Axis 6 (A6): ± 350° Thanks to its robustness and dynamic performance, this type of robot is frequently used in the automotive industry and mechanical engineering. Typical Applications - Material handling & logistics: Palletizing and moving heavy components. - Metal processing: Gas-shielded welding, spot welding, and laser cutting. - Machining: Milling, deburring, and grinding of large workpieces. - Assembly: Handling and joining of heavy components. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2011, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 5921, type of input current: three-phase, input voltage: 2,800 V, pressure: 6 bar, input current: 41 A, feed length X-axis: 4,300 mm, feed length Y-axis: 2,300 mm, feed length Z-axis: 1,200 mm, total height: 4,310 mm, total length: 7,310 mm, total width: 7,130 mm, input frequency: 50 Hz, We offer this excellent 5-axis CNC machining center, the CMS SINTESY 4323 MPT, designed for trimming plastic and laminate parts, manufactured in 2011. Manufacturer: CMS S.p.A. Model: SINTESY 4323 MPT Year of manufacture: 2011 5 interpolated axes Linear axes: X-4300, Y-2300, Z-1200 Rotary axes: B +/- 120 deg, C +/- 240 deg Electrospindle: 7.5 kW Installed power: 28 kW Compressed air consumption: 400 nl/min Tool magazine: 12 positions Extendable tables Fpodezcpkcjpfx Alxjh Dustproof cabin – enclosed machine design. If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, Year of construction: 2012, Mazak Variaxis 500-5X II 5 Axis CNC Machining Centre with Mazatrol Matrix Control. S/No. 244505 (2012) 500mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 500mm Diameter x 405mm x 300kg, 40 Tool ATC, CAT40 Spindle Taper, Kouwa Spindle Chiller Unit, Cromar Swarf Management and Filtration System, OMF 1000 Oil Mist Filter Extraction, Renishaw RMI Tooleye, Machine Weight 7500kg. Country of Origin: Japan Please Note: Erowa Machining Fixture Not Included Fodezcpclepfx Alxjph Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2015, Mazak Variaxis i-500 5 Axis CNC Machining Centre with Mazatol Matrix 2 Control. S/No. 259047 (2015), 500mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 500mm Diameter x 350mm, Max Workpiece Weight 300kg, CAT40 Spindle Taper, 40 Tool ATC, Mazak Spindle Chiller Unit, Vokes Air Scandmist 70D Oil Mist, Filter Extractor, Cromar Swarf Managment and Filtration System, Renishaw RMI - Q Tool Eye, Machine Weight 8000kg Please Note: Erowa Machining Fixture Not Included Lot 5 of Auction 3476. Visit cottandco website for more details. Fjdpfx Alszcn Imjxjph Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 132, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,100 mm, number of axes: 5, Equipment: CE marking, SECOND-HAND 5-AXIS CNC WORKING CENTER BACCI MOD. TWIN - Strokes: X = 3400 Y = 1500 Z = 1100 B = endless C = 400° - Type 4 head 7.5 kw - 0-24.000 rpm - N. 2 tgv working tables - OSAI control - Enclosed cabin on 4 sides + roof Fpsdpfx Ajzclg Hjlxsh - No. 2 Becker vacuum pumps 100 m³/h - Serial no. 132 - Year 2001 (CE rules)

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Fjdpfx Aleyvv Trjxsph Technical data Manufacturer: KEYENCE Model: IM-7500 Head: IM-7020 Type: Optical measuring system Country of origin: Japan Automatic measurement by camera High measurement accuracy Condition Used Fully functional Normal signs of use Included in the set KEYENCE IM-7500 unit IM-7020 head Monitor Control unit Keyboard and mouse Wiring

Condition: used, mileage: 39,900 km, power: 96 kW (130.52 HP), first registration: 07/2018, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Net selling price: 14,900.- € Renault Master, first owner VAT can be shown: Registration: 10/2018 Mileage: 39,900 km kW/hp: 96/130 Last service at: 38,560 km Front brakes NEW Rear brakes NEW If you have any questions: Further equipment/optional extras see below: ---- Please, no emails – due to time constraints, we are unable to respond to them. Thank you for your understanding! ---- Opening hours and further information: Inspection and purchase possible without prior registration: Mon - Thurs: 9:00 a.m. to 4:00 p.m. Fri: 9:00 a.m. to 1:00 p.m. Sat: 9:00 a.m. to 12:00 p.m. Address: Tabakried 11 84076 Pfeffenhausen If you have any questions: Christian Hirsch If you have any questions: Christian Hirsch Please try again later, as we are often in customer consultations. ---- - Air conditioning - Rear view camera - Hands-free system (Bluetooth) - Radio/CD/USB 2x/AUX/Bluetooth - 6-speed manual transmission - Rear wing doors (opening angle 270 degrees) - Central locking with remote control - On-board computer - Eco button - Steering wheel adjustable in height - Seat adjustable in height - Front center armrest (left + right) - Passenger airbag can be deactivated - . - ABS with EBD and brake assistant - Load compartment lighting LED - Package: Load compartment protection package - Wooden paneling of the side walls up to the roof - Wooden floor in the load compartment - Lashing eyes in the load compartment walls - Side marker lights - Lashing eyes in the load compartment floor - Lashing eyes, on the side in the load compartment - Storage compartment - And more. Further equipment see below Further equipment: Storage compartment, Airbag driver side, Exterior mirror electrically adjustable and heated, Outside temperature gauge, Marker lights on the side, Brake assistant, Tachometer, Electronic brake-force distribution, Body/Structure: Box body high roof, Fuel tank: 105 liters, Load compartment bulkhead, Steering column (steering wheel) adjustable in height, Model upgrade, Engine 2.3 liters - 96 kW dCi Diesel CAT, EURO6 Pollen filter, Wheelbase 4332 mm, Smoker package, Tire repair kit, Low emission according to emission standard Euro 6, Gear shift indicator, Sliding door loading/passenger compartment right, Mud flaps front, Fedpfx Alsy Ekyloxsph Side protection strips, Seat cover / upholstery: Fabric, Seats in the driver's cab: Driver's seat adjustable in height, Lashing eyes load compartment floor, Heat protection glazing, Permissible total weight 3.50 t Please, no emails – due to time constraints, we are unable to respond to them. Thank you for your understanding! ---- Opening hours and further information: Inspection and purchase possible without prior registration: Mon - Thurs: 9:00 a.m. to 4:00 p.m. Fri: 9:00 a.m. to 1:00 p.m. Sat: 9:00 a.m. to 12:00 p.m. Address: Tabakried 11 84076 Pfeffenhausen If you have any questions: Christian Hirsch If you have any questions: Christian Hirsch Please try again later, as we are often in customer consultations. ----Further offers at Equipment was determined with the help of a VIN query; technical errors may occur. Information provided on the internet are non-binding descriptions. They do not constitute guaranteed characteristics. The seller is not liable for typing and data transmission errors / changes / input errors. Errors / prior sale reserved.

Condition: used, mileage: 19,000 km, power: 96 kW (130.52 HP), first registration: 07/2017, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Net sale price: €15,900 Renault Master from first owner Multiple units in stock First registration: 07/2017 Mileage: 19,000 km Power: 96 kW / 130 HP For enquiries: Further equipment/special features, see below: ---- Please no emails / no emails, Cannot be processed due to time constraints, thank you for your understanding! ---- Opening hours and further information: Viewing and purchase without appointment possible: Mon - Thu: 9:00 to 16:00 Fri: 9:00 to 13:00 Sat: 9:00 to 12:00 Address: Tabakried 11 84076 Pfeffenhausen Contact: Christian Hirsch Please try calling several times, as we are often in customer meetings. ---- - Air conditioning - Reversing camera - Hands-free system (Bluetooth) - Radio/CD/USB x2/AUX/Bluetooth - 6-speed manual transmission - Rear wing doors (270-degree opening angle) - Central locking with remote control - On-board computer - Eco mode button - Height-adjustable steering wheel - Height-adjustable seat - Front armrests (left & right) - Passenger airbag deactivatable - ABS with EBD and brake assist - LED cargo area lighting - Package: Cargo Area Protection Package – wooden sidewall cladding up to the ceiling – wooden floor in the loading area – lashing eyes in the cargo area walls - Side marker lights - Lashing points in cargo area floor - Lashing points, lateral in cargo area - Overhead storage shelf - And more. For further equipment details, see below Further equipment: Overhead storage shelf, Driver airbag, Electrically adjustable and heated exterior mirrors, Outside temperature display, Side marker lights, Brake assist, Tachometer, Electronic Brake Force Distribution, Body type: High-roof van, Fuel tank: 105 litres, Bulkhead, Height-adjustable steering column (steering wheel), Facelift model, Engine 2.3L – 96 kW dCi Diesel CAT, EURO 6 Pollen filter, Wheelbase: 4332 mm, Smoker’s package, Tire repair kit, Low emissions according to Euro 6 emission standard, Gear shift indicator, Sliding door, right, for cargo/passenger compartment, Front mud flaps, Side protection strips, Seat cover/upholstery: fabric, Cab seats: driver’s seat height-adjustable, Lashing rings cargo area floor, Heat-insulating glazing, Permissible gross weight 3.5 t Please no emails / no emails, Cannot be processed due to time constraints, thank you for your understanding! ---- Opening hours and further information: Viewing and purchase without appointment possible: Mon - Thu: 9:00 to 16:00 Fri: 9:00 to 13:00 Sat: 9:00 to 12:00 Address: Tabakried 11 84076 Pfeffenhausen Contact: Christian Hirsch Please try calling several times, as we are often in customer meetings. ---- Further offers at Fpedpoyz Hnqefx Alxeh Specification has been determined with the help of a VIN query; technical errors may occur. Information provided online constitutes non-binding descriptions. They do not represent guaranteed properties. The seller is not liable for typing and data transmission errors/changes/input mistakes. Subject to errors and prior sale.

Condition: used, mileage: 29,998 km, power: 96 kW (130.52 HP), first registration: 01/2018, fuel type: diesel, overall weight: 3,500 kg, color: yellow, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Renault Master from first owner Multiple units in stock VAT deductible: Net sale price: €13,999 First registration: 01/2018 Mileage: 29,900 km Power: 96 kW / 130 HP If you have questions: For further equipment/special features see below: ---- Please no e-mails / no emails We are unable to process emails due to time constraints, thank you for your understanding! ---- Opening hours and further information: Viewing and purchase possible without appointment: MON - THU: 09:00 - 16:00 FRI: 09:00 - 13:00 SAT: 09:00 - 12:00 Address: Tabakried 11 84076 Pfeffenhausen For inquiries: Christian Hirsch For inquiries: Christian Hirsch Please call several times, as we are often in customer meetings. ---- - Air conditioning - Rear-view camera - Hands-free kit (Bluetooth) - Radio / CD / 2x USB / AUX / Bluetooth - 6-speed manual transmission - Rear wing doors (270-degree opening angle) - Central locking with remote control - On-board computer - Eco mode - Height-adjustable steering wheel - Height-adjustable seat - Front center armrest (left + right) - Switchable passenger airbag - . - ABS with EBD and brake assist - LED cargo area lighting - Package: Cargo Area Protection Package - Wooden paneling of sidewalls up to the roof - Wooden floor in cargo area - Lashing eyes in the cargo area walls - Side marker lights - Lashing eyes in cargo area floor - Lashing eyes, side cargo area - Overhead storage shelf - And much more. Further equipment see below Additional equipment: Overhead storage shelf, Driver airbag, Electrically adjustable and heated exterior mirrors, Outside temperature display, Side marker lights, Brake assist, Tachometer, Electronic brake-force distribution, Body/Build: high-roof panel van, Fuel tank: 105 liters, Cargo area partition, Height-adjustable steering column (steering wheel), Facelift, Engine 2.3L – 96 kW dCi Diesel CAT, EURO 6 Pollen filter, Wheelbase 4332 mm, Smoker package, Tire repair kit, Low emissions according to Euro 6, Gear shift indicator, Sliding door, right side (cargo/passenger area), Front mud flaps, Side protection strips, Seat upholstery: fabric, Cabin seats: driver’s seat height adjustable, Lashing eyes cargo floor, Heat-insulating glazing, Permissible gross vehicle weight 3.50 t Please, no emails Fsdpfx Alewh Ibxexoph We are unable to process emails due to time constraints, thank you for your understanding! ---- Opening hours and further information: Viewing and purchase possible without appointment: MON - THU: 09:00 - 16:00 FRI: 09:00 - 13:00 SAT: 09:00 - 12:00 Address: Tabakried 11 84076 Pfeffenhausen If you have any questions: Christian Hirsch Please try calling several times, as we are often in customer meetings. Further offers at Equipment determined through VIN lookup; technical errors may occur Information provided online is non-binding and for description purposes only. They do not constitute guaranteed characteristics. The seller is not liable for typographical or data transmission errors / changes / input errors. Subject to error and prior sale.

Condition: excellent (used), mileage: 265,184 km, power: 110 kW (149.56 HP), first registration: 04/2022, fuel type: diesel, tire size: 225/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, CO₂ emissions: 239 g/km, fuel tank capacity: 80 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 3, total length: 6,200 mm, total width: 2,070 mm, total height: 2,480 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,100 kg, Year of construction: 2022, Equipment: ABS, AdBlue, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, navigation system, power assisted steering, power mirror, sliding door, soot filter, traction control, trailer coupling, General information Number of doors: 3 Cab: single Registration number: VPK-23-X Technical information Number of cylinders: 4 Engine capacity: 2.299 cc Axle configuration Tyre size: 225/65R16 Brakes: disc brakes Front axle: Max. axle load: 1850 kg; Tyre profile left: 80%; Tyre profile right: 80% Rear axle: Max. axle load: 2100 kg; Tyre profile left: 90%; Tyre profile right: 90% Weights Empty weight: 2.047 kg Carrying capacity: 1.453 kg GVW: 3.500 kg Max. towing weight: 2.500 kg (unbraked 750 kg) Consumption Average fuel consumption: 9,1 l/100km (31 MPG) Condition Technical condition: very good Fpodpfjvur Rfsx Alxjh Visual appearance: very good Damages: none Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Heated door mirrors - Leaf spring suspension - LED - Multifunctional Steering Wheel - Parkingsensors back - Parkingsensors front - Particulate filter - Radio/Cd/Audio system - Reversing camera - Side Door Right - Stability control - Wireless phone charger = Remarks = VIDEO: Renault Master L3H2 2.3 DCI 150 HP Euro 6 265000 KM NAP Demonstrable Air conditioning / Navigation / Reversing camera Tow bar / LED / Cruise control Technically and optically in very good condition

Condition: used, mileage: 158,741 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,680 mm, first registration: 05/2021, fuel tank capacity: 80 l, CO₂ emissions: 251 g/km, emission class: euro6, color: white, number of seats: 3, number of previous owners: 2, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, traction control, General information Number of doors: 5 Model range: Oct 2020 - Apr 2024 Cab: single Technical information Torque: 360 Nm Number of cylinders: 4 Engine capacity: 2.298 cc Transmission: 6 gears, Manual gearbox Measures length/height: L2H1 Dimensions (LxBxH): 555 x 207 x 250 cm Weights Empty weight: 1.949 kg Carrying capacity: 1.551 kg GVW: 3.500 kg Interior Interior: black Consumption Average fuel consumption: 6,8 l/100km (42 MPG) Urban fuel consumption: 7,5 l/100km (38 MPG) Extra urban fuel consumption: 6,4 l/100km (44 MPG) Maintenance, history and condition Service history: Present APK (MOT): New APK (MOT) upon delivery Number of keys: 2 (1 hand transmitter) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = Fedpfx Aozcfayolxsph - Automatic dipped headlights - Bluetooth car kit - Co-driver's bench - Driver's airbag - Electrically adjustable door mirrors - Electrically operated front windows - Electronic brakeforce distribution - Front central armrest - Height adjustable driver's seat - Height adjustable steering wheel - Immobiliser - Ladder - Loading floor - Multifunctional steering wheel - Panelling - Partition - Radio - Rain sensor - Rear doors - Rear parking sensor - Remote central locking - Sliding side door right - Telephone enabled with Bluetooth - Third brake light

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, total height: 2,600 mm, total length: 2,200 mm, total width: 2,100 mm, overall weight: 3,600 kg, spindle speed (min.): 10,000 rpm, spindle speed (max.): 10,000 rpm, For sale is a high-quality and reliable CNC machining center of the type Hommel Unverzagt UVA 25 PLUS. This machine stands out for its compact design combined with high stability, making it the ideal solution for workshops that value precision and German engineering. Manufacturer: Hommel Unverzagt GmbH Model: UVA 25 PLUS Machine type: Vertical machining center Weight: approx. 3,600 kg (according to nameplate) Year of manufacture: 2008 Tool holder: SK 40 or BT 40 Control: SINUMERIK 828D PPU 240.2 Includes active cooling unit: Daikin oil cooler Interfaces: Connections for Profinet (PN), Ethernet (LAN), USB, and RS232 port. X-axis: approx. 725 mm Y-axis: approx. 460 mm Z-axis: approx. 460 mm Table surface: 760 x 420 mm Machine dimensions: approx. 2,200 mm x 2,100 mm x 2,600 mm Footprint: 3,500 mm x 3,000 mm Transport and loading can be organized throughout Europe at extra cost, upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale Fpsdpey Htd Njfx Alxoh BUYING & SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your machine? For further information or to contact us, please visit our website.

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrical connection: 3x400V 50 / 60Hz - Cardanic 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with infinitely variable, height-adjustable dust extraction hood – controlled by electric motor - Full rated power at approximately 12,000 rpm - Speed range: 1,000 – 24,000 rpm - Drive: 3-phase high-frequency motor controlled via inverter - Rotational direction: right/left - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Maximum saw blade diameter: 350 mm - Spindle cooling: liquid cooling - Continuously adjustable extraction hood - Profit H350 16.30: CNC machining center in gantry design (without tools) with digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made from thick-walled, electro-welded box sections. The internal steel ribbing in the frame ensures high stability. - Machining area H350 16.30: Fpodpey Ih Rgefx Alxjh Axis travel: X = 4,000 mm Y = 1,970 mm Z = 455 mm Working area: X = 3,000 mm Y = 1,500 mm Z = 150 mm clearance height Axis positioning speeds: Depend on the selected safety system (can be taken from the layout). - Gantry drive on both sides - X-axis guidance system: The carriage of the X-axis is driven by a rack and pinion with helical, crowned teeth—this ensures maximum precision. The reduction gear guarantees the highest machining quality and repeat accuracy. The slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. - Y-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Y-axis is positioned by a ground ball screw. - Z-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Z-axis is positioned by a ground ball screw. - Automatic central lubrication: Grease is supplied under control to the guide carriages of the X, Y, and Z axes as well as to the recirculating ball screws on Y and Z. Lubrication is performed automatically after a preset interval. - 12-position linear tool changer mounted on the left side of the machine frame, including one pickup station for aggregates: The 12-position linear changer ensures minimal changeover times and offers ample space for milling tools. One station for aggregates (see layout for configuration options). Maximum tool diameter: 250 mm Maximum tool length: 240 mm - Drill head DH 18 6H 1S: Vertical: 12 spindles—7 in X-direction and 5 in Y-direction. Horizontal: 6 spindles—4 in X-direction and 2 in Y-direction. Stroke = 70 mm; max. drill length = 70 mm; shank diameter = 10 mm. All spindles individually driven and selectable. 1 grooving saw in X-direction; maximum saw blade diameter 120 mm.

Year of construction: 2000, condition: defective spare-parts repository (used), Yaskawa Motoman UP130 6-axis robot with Motoman Xrc control Robot: Motoman YR-UP130-A00 Hand controller :Yasnac Mrc Year of construction: 2000 (6th month) Robot controls: Motoman Xrc ERCS UP130-RE00 Hand control: Yasnac Mrc Year of construction: 2001 - Axis: 6 - Load capacity: 130 kg - Arm extension: 2650 mm - Repeatability: 0.2 mm Fpodpsfhkfijfx Alxsh - Robot weight: 1300 kg - controller Xrc - cables, plugs, plugs Structure: vertically articulated type Axis types: S-axis 130 ° / s (2.27 rad / s) L-axis 130 ° / s (2.27 rad / s) U-axis 130 ° / s (2.27 rad / s) R axis 215 ° / s (3.75 rad / s) B-axis 180 ° / s (3, 14 rad / s) T-axis 300 ° / s (5.24 rad / s) Movement areas. S axis 180 ° L axis + 76 ° - 60 ° U axis + 240 ° - 130 ° R axis 360 ° B axis 130 ° T-axis 360 ° Purchase, Acquisition, asset management of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 285 kg, load capacity: 6 kg, arm reach: 1,915 mm, pivoting range: 360 °, controller manufacturer: Yaskawa Motoman, controller model: NX100, input voltage: 400 V, type of input current: three-phase, For sale in excellent condition industrial robot Yaskawa Motoman YR-HP20 6-axis robot with NX100 controller robot model: Motoman YR-HP20-B10 Stable design, 285 kg, 6 kg load capacity and 1915 mm arm reach. The rotation range is 360°, making it versatile for various work processes Fsdpfsyhxc Aex Alxoph Robot, control unit, cable, teaching panel, operating instructions robot: Yaskawa Motoman YR-HP20-B10 year of manufacture: 2008.08 load capacity: 6kg repeatability: 0.06 mm Serial number: SBM254-1-3 controller: MOTOMAN NX100 ERCS-HP20-AE00 year of manufacture: 2009.02 voltage: 400v 50Hz Robot Range of movement: J1: ±180° J2: +155° - 110° J3: +255° - 165° J4: ±200° J5: +230° - 150° J6: ±360° Speed ​​of movement: J1: 170 °/s (2.97 rad/s) J2: 170 °/s (2.97 rad/s) J3: 175 °/s (3.05 rad/s) J4: 355 °/s (6.2 rad/s) J5: 345 °/s (6.02 rad/s) J6: 525 °/s (9.16 rad/s)

Condition: used, mileage: 105,754 km, power: 100 kW (135.96 HP), first registration: 01/2020, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,180 mm, fuel: diesel, CO₂ emissions: 251 g/km, fuel tank capacity: 80 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 5,050 mm, total width: 2,070 mm, total height: 2,310 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), full service history, navigation system, onboard computer, power assisted steering, power mirror, sliding door, trailer coupling, General information Number of doors: 5 Model range: Jun 2019 - Dec 2020 Cab: single Technical information Torque: 360 Nm Number of cylinders: 4 Engine capacity: 2.298 cc Measures length/height: L1H1 Weights Empty weight: 1.855 kg Carrying capacity: 1.645 kg GVW: 3.500 kg Interior Interior: black Consumption Average fuel consumption: 6,7 l/100km (42 MPG) Urban fuel consumption: 6,7 l/100km (42 MPG) Extra urban fuel consumption: 6,7 l/100km (42 MPG) Maintenance, history and condition Number of owners: 3 APK (MOT): New APK (MOT) upon delivery Number of keys: 1 (1 hand transmitter) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = - Automatic dipped headlights - Car kit - Co-driver's bench - Driver's airbag - Electrically operated front windows - Front central armrest - Height adjustable steering wheel - Immobiliser - Loading floor - Multifunctional steering wheel - Panelling - Partition - Radio - Radio with DAB+ - Rear parking sensor - Remote central locking Fpsdpfoyylz Hsx Alxsh - Sliding side door right - Telephone enabled with Bluetooth - Third brake light

Condition: used, mileage: 144,957 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,680 mm, first registration: 08/2018, fuel tank capacity: 80 l, CO₂ emissions: 204 g/km, emission class: euro6, color: white, number of seats: 2, number of previous owners: 1, Year of construction: 2018, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, power assisted steering, sliding door, General information Number of doors: 5 Model range: Mar 2016 - Jul 2019 Cab: single Technical information Torque: 320 Nm Number of cylinders: 4 Engine capacity: 2.298 cc Transmission: 6 gears, Manual gearbox Measures length/height: L2H2 Dimensions (LxBxH): 555 x 207 x 250 cm Weights Empty weight: 1.909 kg Carrying capacity: 1.591 kg GVW: 3.500 kg Interior Interior: black Consumption Average fuel consumption: 7,8 l/100km (36 MPG) Urban fuel consumption: 8,9 l/100km (32 MPG) Fpjdpfszb H Hlex Alxoh Extra urban fuel consumption: 7,1 l/100km (40 MPG) Maintenance, history and condition Service history: Present APK (MOT): New APK (MOT) upon delivery Number of keys: 2 (2 hand transmitters) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = - Car kit - Driver's airbag - Electrically adjustable door mirrors - Electrically operated front windows - Front central armrest - Front fog lights - Height adjustable driver's seat - Height adjustable steering wheel - Immobiliser - Loading floor - Multifunctional steering wheel - Panelling - Partition - Passenger airbag - Radio - Rear doors - Remote central locking - Reversing camera - Sliding side door right - Start / stop system - Telephone enabled with Bluetooth - Third brake light

Condition: used, Year of construction: 1996, total height: 2,150 mm, total length: 1,420 mm, total width: 2,010 mm, overall weight: 3,100 kg, grinding spindle speed: 6,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 580 mm, CNC Universal 5-Axis Tool-and Cutter Grinder Fjdpfjzavqwjx Alxoph CNC Control HMC 400 CNC X-axis movement 400 mm Y-axis movement 250 mm Z-axis movement 580 mm C-axis (table rotation) ± 200° Max diameter grinding wheel Ø 200 mm Spindle speed (grinding) 3000 / 6000 R/Min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table length: 1,600 mm, table width: 1,400 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg Fedpfxszauxgj Alxeph If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.