Used Paul 15 Ao for sale (15,993)

Condition: used, Coupling module, industrial Ethernet switch, network switch, Lan switch, coupler, DP/DP coupler Fjdshz Rgbepfx Alqjpg -Manufacturer: Siemens, Simatic S7 coupler DP/DP coupling orig Type: 6ES7 158-OAD01-OXAO -Cardboard dimensions: 150/130/H45 mm -Weight: 0.3 kg

Condition: used, Simatic panel, operator panel, machine control, interface panel, control unit, control unit, control panel Fedpfx Alog S Dk Ajqopg -Manufacturer: SIEMENS, Operator Panel Coros OP15-C1 -Type: 6AV3515-1MA20-1AAO -Dimensions: 240/50 / H170 mm -Weight: 1.2 kg

Condition: like new (used), functionality: fully functional, Tool shaft for multi-saw PAUL K34G total length 850mm diameter 100mm Fpedpfx Alsqwg Swjqjg

Condition: used, Year of construction: 1972, machine/vehicle number: 1171, Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Fpodpfx Alouqdwxjqeg Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton Standard configuration Machine included: - Fence HS decoiler M 15 / 500 - built in 2009Material width 15 - 500 mmCoil weight 1,5 tCoil exterior diameter 1400 mmCoil interior diameter  380 - 530 mm HS straightener RME 40 - 9 - built in 2009 Material thickness 0,4 - 2 mmNumber of feeding rolls 2 piecesNumber of straightener rolls 9 piecesDiameter of straightener rolls 61,9 mmDiameter of feeding rolls 61,9 mmFeeding speed 40 m / minFeeding length  0 - 9999,99 mm Extended machine accessories The machine was converted to SIEMENS S7 in 2009.

Condition: used, Technical specifications: Working width: 1150 mm 1 combined unit with pneumatic shoe Pneumatic shoe lift mechanism Paper/air blow-off Support foot before first roller Paper break protection with raised component 6 speeds for the sanding unit Roller diameter: 140 mm Maximum workpiece height: 160 mm Sanding belt dimensions: 1140x1400 mm Feed belt speed: Variable Extraction port diameter: 160 mm Electric height adjustment Analog display Safety switch Main motor power: 9 and 11 kW Fsdpfxjx Uz Dyo Alqjpg Voltage: 380 V Overall dimensions: Length: 1900 mm Width: 2400 mm Height: 2180 mm

Year of construction: 2003, condition: used, Paul AB 920 feed table Fedpfx Aloiauhzsqjpg

Condition: used, This listing is for the Millipore Elix Advantage 15 Water Purification System Fpsdpfxex Tucts Alqog The unit is in full working condition and is ready for immediate use The Elix Advantage 15 is a laboratory water purification system designed to generate Type II pure water directly from potable tap water using an advanced combination of purification technologies. It’s part of Millipore’s Elix series, which emphasizes reliable, continuous production with minimized maintenance needs.

Condition: excellent (used), Year of construction: 1998, Weishaupt L5 Z/D oil burner Output: 15-100kg/h Year: 1998-2006 Several available Viewing by telephone only! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible Fedpfsh Ibgpox Alqepg

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 98125446, saw blade diameter: 500 mm, cutting height (max.): 75 mm, positioning accuracy: 1 mm, cutting width (max.): 180 mm, CNC full optimization cross-cut sawline PAUL 11MKL for soft and hard wood. Line include : infeed conveyor with length 11525 mm, double side table for marking wood defects, measuring station with luminescence and light barrier for wood start and end detection, sawing station and outfeed conveyor 11500 mm sorting line with 5 side pushers to sorting table. Wood input length 2000-6000 mm Wood width 30-180 mm Wood thisckness 6-75 mm Min cross-section 30x15 mm or 45x6 mm Max cross-section 130x75 mm or 180x45 mm Saw blade diameter 500 mm Fpsdpfx Alexrr S Hsqeg Saw motor 5.5 kw , saw stroke pneumatic, saw cycles 0.4 sek Feed speed max 200 m/min Power consumption 11.4 kw Control software CNC MAXI 5 Premium Line is in full working condition

Condition: used, This listing is for the Sigma 2-15 Centrifuge +Accessories Shown The unit is in full working condition and is ready for immediate use The Sigma 2‑15 is a benchtop (tabletop) laboratory centrifuge produced by Sigma (Sigma Laborzentrifugen GmbH), designed for moderate-speed separation tasks across various scientific and industrial settings Key Features & Specifications: Purpose: Used to separate sample components (e.g., cells, sediments) through centrifugal force—ideal when high speed isn't required Power & Voltage: Operates at 240 W, 220–240 V, 50 Hz Speed: Fsdpfx Alsxhffreqspg Centrifuge motor: up to 13,500 rpm. Rotor-specific max: up to 15,300 rpm, depending on rotor type . Capacity: Typical configuration includes 4 buckets, each capable of holding up to 100 ml (e.g., rotor 11192 with buckets 13012) Some versions deploy a fixed-angle rotor (e.g., 12189) with capacity around 480 g Dimensions: Compact footprint of approximately 33 × 43 × 30 cm (W × D × H) . Other Features: Microcontroller-based control of speed and time. Multiple acceleration/deceleration curves and program memory (up to 10 programs) in some configurations Magnetic rotor identification (prevents overspeeding) and induction drive for low maintenance

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, 1 overhauled splinter separator Paul, 2-lamella, fixed lamella on the right, movable lamella on the left (for left-hand machine) Total length: 5.50 m Total width: 850 mm Fjdpfotx A Sxex Alqjpg Roller spacing: 500 mm Roller width: 790 mm for max. timber length: 5.00 m 8 driven spiral rollers and 3 driven smooth rollers. 11 rollers removed and fitted with new ball bearings Movable slat mounted on 4 ball-bearing supports for easy movement with new roller chain and 11 new idler wheels. Sturdy sheet metal lining between all rollers as good as new condition

Condition: new, Year of construction: 2025, Laser source: 3kW Raycus Laser head: Raytools autofocus Control system: FSCUT 5000 A Loading of tubes up to 6400 mm long, unloading up to 4000 mm Positioning accuracy: ±0.05/1000 mm Fpedoi Arwljpfx Alqeg Acceleration: 1 m/s² Speed: 120 rpm Max. Positioning speed: 100 m/min Max. Max. weight of a pipe: 250 kg Pipe diameter: 15-230 mm Total machine size: 12728 × 3400 × 2450 mm

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Fpodotrpiispfx Alqeg Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: good (used), Year of construction: 1994, The feed hydraulic pump is missing. Otherwise, the machine is operational. Fpjdpfx Aoxn Ukkslqeg

Condition: excellent (used), Drilling depth 9 cm Pneumatic press Pneumatic feed Motor 1.7/2.3 kW Height adjustment 14 cm 45-degree angle Table length 60 cm Width 72 cm Reach 60 cm (right-left) Front-back 20 cm Fodpfowndwpox Alqjpg

Condition: used, Complete sawmill, for now only for sale as a whole. Reservation for individual purchase possible at any time. Sawmill consisting of: 01. Log infeed 3-strand Mayrhofer with separator with inserter Total length: 8 meters Width: 3.5 meters Fpodpjwptuyjfx Alqeg 02. Fully hydraulic carriage Mayrhofer with auxiliary carriage with rails Track gauge: 90 cm 03. Pini & Kay FN65 HH frame saw Passage width: 650 mm Drive motor: 33 kW With saw blades With suspension With intermediate gear With splitting wedge With scraper conveyor for sawdust 04. Frame roller table with 3 extractors and steep conveyor Length: 8.5 meters Width: 1.8 meters Roller width: 1.6 meters 05. Extraction table 4-strand Length: 4.5 meters Width: 2 meters 06. Steep conveyor 4-strand Conveyor length: 3.6 meters Width: 3.8 meters 07. Double edger Paul KME 2 0-line left Right-hand machine Drive motor: 22 kW With 2 under-table crosscut saws With hydraulic roller lifting With hydraulic width adjustment With sliver separator With extraction table/cross conveyor for slivers With elevator for main material With conveyor belt With spiral roller conveyor With manual box sorting (10 boxes/carts) 08. Sharpening room consisting of: Frame saw sharpener Vollmer CNHV 1978 Set device Loroch SGB 6 1983 09. Drying chamber Vanicek Internal dimensions: Length: 4.53 m Width: 9.16 m Height: 4.4 m External dimensions: Length: 4.6 m Width: 9.3 m Height: 4.62 m Location: Austria, near Vienna

Year of construction: 1993, condition: used, - working width (mm): 2200 - engine power (kW): 22 - top rollers: with PU rings - bottom rollers: knurled - Saw shaft: included Fpodon I Twyepfx Alqjg

Year of construction: 2002, condition: good (used), Min. inlet length: 500 mm, max. 5.5 m. Cross section: max. 85 X 150 Fpedpfsbg Svhex Alqsg Motor: 5,5 kW Sawing stroke servo rocker Feed by rollers, 5 pieces on top, 5 pieces on bottom CNC control Maxi 4.0 1 X sorting each 11,5 m year of manufacture 2002

Condition: like new (used), Min. input length: 500 mm, max. 6 m. Cross section: max. 140 X 250 Motor: 5.5 kW Sawing stroke servo swing arm Feed by means of rollers, 6 pieces top, 6 pieces bottom CNC control Maxi 8.0 Fjdpfx Asr A Et Tjlqepg 1 X sorting unit per 11.5 m Machine is set up according to your wishes

Condition: not inspected (used), functionality: unexamined, MULTIPLE CIRCULAR SAW PAUL K 34G/1500 OCCASION TECHNICAL FEATURES: - DRAGGING SYSTEM RUBBERIZED ROLLERS. - USEFUL DRAG WIDTH OF 1.500 MM. Fodpfx Aouryrnjlqepg - MAIN ENGINE POWER 37 KW (50 Cv) - ELECTRONIC VARIATOR REDUCER MOTOR OF DRAGGING 3 HP AND 2-48 M/MIN - MAXIMUM SAW DIAMETER 300 MM - CUTTING HEIGHT MAX 100 MM

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 565 kg, fuel type: diesel, tank capacity: 38 l, color: beige, power: 12.06 kW (16.40 HP), output current: 21 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 11.6 kW (15.77 HP), nominal power (apparent): 15 kVA, continuous power: 10.4 kW (14.14 HP), continuous power (apparent): 13 kVA, total length: 1,850 mm, total width: 850 mm, total height: 900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, AKSA AP 15 Perkins PRP output: 10.4 kW / 13 kVA ESP output: 11.6 kW / 14.5 kVA Fodpfx Ajwu Dbuolqjpg Engine: Perkins 403A-15G1 Emission level: Stage 2 Speed: 1,500 rpm Mechanical governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford or equivalent Voltage: 400/231 V Voltage regulator: AS540 Control panel: DSE 6120 – emergency automatic start Battery charger: 5 ampere Type: Canopy unit; weatherproof, soundproofed Emergency stop switch Radiator with mechanical fan Base frame construction with integrated fuel tank (38 L) and vibration dampers Coolant preheating Voltage and frequency regulation according to ISO 8528-5 Unit suitable for stationary use only Please note that, in accordance with the applicable EU regulation, these units are not approved for mobile use. The units are sold as B-stock. B-stock means the units may show cosmetic defects such as minor rust, or rust on the housing. These defects do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and the associated condition of the units.

Condition: refurbished (used), Model 11 completely overhauled Description: CNC cross-cut system Paul MKL or K or KE as desired Manufacturer: Paul Year of manufacture: General overhauled with newest technology Condition: As good as new Technical data: Cutting width 150 mm Cutting height 85 mm Saw blade diameter:450 mm Saw motor 5,5KW Input length as required CNC Maxi 5 control with optimization Sorting belt as desired Machine would be completely overhauled, all bearings new motors new with latest eff Class, new control, new swingarm. Fpsdpfjb Rl I Hsx Alqog

Condition: reconditioned (used), - Paul cross-cut saw 17 AP - pneumatic saw stroke - 150 mm cutting height - 400 mm max. cutting width - 2 non-driven roller tables, each 2,000 mm long Fedpfxjvkfuio Alqepg

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: C/70001, functionality: fully functional, operating hours: 601 h, workpiece height (max.): 42 mm, edge thickness (max.): 3 mm, product length (min.): 160 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Workpiece height: 8 - 42 mm Workpiece width: min. 70 mm Workpiece length (strip edges): min. 160 mm Workpiece length (endless roll): min. 60 mm Workpiece length (with double end-cutting device): min. 150 mm Edge parameters Edge thickness: max. 3 mm Edging thickness: 0.2 - 12 mm Working height and speed Working height: 800 mm Feed speed: 12 m/min Fsdpfxewlquvj Alqepg Adhesive application Adhesive application: via application roller Process: Hot melt adhesive, hot-cold process, single-sided, right-hand design Heating time of adhesive tank: 8 min MACHINE DETAILS Total connected load: 12.5 kW Total weight: 2,100 kg Total length: 5,300 mm Total width: 900 mm Total height: 1,300 mm Operating voltage: 400 V, 50 Hz Input current: 400 A Compressed air connection: 6 bar Air connection: 6 bar, 1/4" Extraction connection: 1 x central extraction nozzle, diameter: 160 mm UNITS - Jointing unit with 2 HF motors, 1.5 kW each, 12,000 rpm, automatically controlled, including DIA MAX DIA jointing set Ø 85 x 30 x 42 mm, 3 teeth (LEUCO system), for panel thicknesses up to 42 mm - Double cross-cutting unit with 2 HF motors, 0.3 kW each, 12,000 rpm, 2 automatic positions (0° / 3°), 2 carbide saw blades Ø 140 x 3.2 x 16 mm Z 36 - Flush trimming machine with 2 HF motors, 0.43 kW each, 12,000 rpm, for solid and plastic edges, single-sided scanning, 2 carbide insert heads Ø 70 x 20 x 16 mm, Z 4 - Fine trimming machine with 2 HF motors, 0.3 kW each, 12,000 rpm, double-sided scanning, quick-change device, 2 AT 73 carbide rounding cutter heads Ø 73 x 16 x 16 mm, Z 3, profile knives R2 – R5 - Scraper with double-sided scanning, automatic control, for PVC and plastic edges - Corner rounding machine with 2 motors, 0.35 kW each, 12,000 rpm, 200 Hz, double-sided scanning, 1 work spindle each top/bottom AR 73 radius cutter heads Ø 73 x 16 x 16 mm, 3 teeth, profile cutters R2 – R5 EQUIPMENT - Double-roll top pressure with electronic positioning - Single feed for strip and solid edges - Automatic roll magazine for rolls up to 800 mm in diameter, with pneumatic cutting device up to 3 mm thick - Rapid heating tank for hot melt adhesive granules, with electronic temperature control - Automatic reversal of adhesive dosing via PLC (same and counter-rotating) - Automatic infeed guide, no manual adjustment of edge thickness required - Central control via PLC-controlled control panel, including plain-text error display - Program memory with name and number programs

Condition: reconditioned (used), functionality: fully functional, cutting height (max.): 125 mm, • 125 mm cutting height • 750 mm passage width • Saw shaft newly fitted with bearings • 18.5 kW drive motor • 1 fixed bushing • 1 slatted bushing, approx. 300 mm usable clamping length • 1 adjustable bushing • 50 mm saw shaft diameter • Mechanical height adjustment of upper rollers • Vibratory chute in the machine Fsdpfx Alsw Slwksqepg • 10 curved saw blades • 0 – 50 m/min stepless feed speed • Machine workshop inspected • Machine newly painted • Approx. 5 m long roller table in front of the saw • Approx. 4 m long roller table after the saw