Used Nail Rolling Welding Machine for sale (69,613)

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm Nwedpfx Afjykvdleaof - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Condition: refurbished (used), functionality: fully functional, overall weight: 540 kg, total length: 905 mm, total width: 950 mm, total height: 1,125 mm, Year of construction: 2013, operating hours: 50 h, input frequency: 50 Hz, shaft diameter: 40 mm, type of input current: three-phase, Equipment: emergency stop, rotational speed infinitely variable, Profile Bending Machine ARKUS12 Tablet350 (refurbished) For sale is a profile bending machine ARKUS12 with Tablet350 control system, year of manufacture 2013. The machine was completely refurbished in 2026 and technically upgraded to the new Tablet350 control system. With only approximately 50 operating hours since the overhaul, the machine is in an excellent, nearly new condition and is available immediately. Technical Data: Machine type: Profile Bending Machine Manufacturer / Model: ARKUS12 Control system: Tablet350 (2026 upgrade) Year of manufacture: 2013 Operating hours: approx. 50 hrs Condition: As-new, fully refurbished and upgraded Nsdpjy Exdfsfx Afaswf Warranty: 2-year warranty on electronics Availability: Immediate Further technical details and specifications as per manufacturer can be found at pbt-ag.com. Note: The sale is made under exclusion of liability for material defects, except for the stated warranty.

Condition: excellent (used), functionality: fully functional, Welding machine: FUSION 4H Frame discharge unit First milling module Q-MATIC 1 Nedpfjxzzxbsx Afaewf Serial connection between welding machine and cleaning unit Rotary table Cleaning unit (second model) TRIMMER 4A Extraction table Second milling module (INTEGRA Q2) Q-MATIC 2 Line supervisor laptop

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1028, Thread Rolling Machine LEISTRITZ RT 400-CCA Nwsdpfx Afoxytmheaef Year of manufacture: 2004 / Control system retrofit in 2019 Connection voltage: 3x400 V Frequency: 50 Hz Rated power: 65 kW Main fuse: 125 A Operating pressure: Air: 6 bar, Oil: 270 bar Control voltage: 24 VDC Maximum shaft length: 275 mm Minimum shaft length: 125 mm Maximum roll set diameter: Tool Ø69.85: 215 mm, Tool Ø80: 210 mm Minimum roll set diameter: Tool Ø69.85: 176-178 mm, Tool Ø80: 176 mm Maximum rolling force: 40 t Space requirement: 3.4 m x 2.9 m x 2.2 m Weight: 4900 kg Accessories: - Coolant filtration system - Second spindle pair (1x for tools Ø69.85 mm, 1x for tools Ø80 mm)

Condition: used, sheet width 3355 mm plate thickness 63,5 mm Nwodpfx Aeyuql Ssfasf roll diameter 686 mm voltage 400 V total power requirement 150 HP weight of the machine ca. 95 t dimensions of the machine ca. 62 m

Year of construction: 2005, condition: used, functionality: fully functional, Mobert roller bag making machine for the production of plastic bags on roll Bag width max 1100mm Bag length min/max 250/1500mm Njdoy Ewqdopfx Afaewf Film thickness min/max 10/60my Mechanical speed 300 cpm Film speed 160 m/min 2 lanes Banderole unit Recently renewed

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 2050 mm plate thickness 4.5 mm 4.0 mm roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Exhibition machine from 2026 With only approx. 2 operating hours Condition like new Special price on request Features: - Robust electromechanical bending machine - 2 central rollers driven by electric motors (top & bottom rollers) - Top roller manually swivels out, with hinged bearing - Includes tapered bending attachment - Freely movable control panel Nsdpfexaawgox Afaewf - Bottom roller manually adjustable via handwheel - Asymmetrical roller arrangement - Self-braking main motor - Safety device (safety tether with switch unit) - CE marking/Declaration of Conformity Optional equipment included in the price: - Hardened rollers - Motorized side roller adjustment - Digital position display for motorized adjustable side roller

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column Njdpfx Aoy A Iftsfaewf -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V -Receiver: Shaft Ø 20 x 18 mm see photo -Dimensions: 270/230/H85 mm -Weight: 2.5 kg

Condition: used, Year of construction: 1975, Stock number: 2480 Manufacturer: Rade Koncar Year of manufacture: 1975 Type: 2B-1 Device number: 75271 Welding current primary: 220 V 16 kVA 92 A 380 V 16 kVA 53 A Secondary welding current 220 V 100 A 380 V 200 A Equipment: mobile Dimensions: 500 x 700 x 600 mm weight: 120 kg Nsdpfx Afsrnrtrsaewf

Condition: used, functionality: fully functional, machine/vehicle number: 3217, sheet thickness steel (max.): 50 mm, working width: 2,500 mm, Boldrini SIJ 2500x50 Three Roll Initial Pinch Plate Bending Machine 2,500mm x 50mm plate capacity Njdpfx Aey Azgwjfaewf Cardan shaft drive from gearbox Radio control console control of rolls and rolling speed

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table Nsdpfxjy Au Nfo Afajwf -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 Nodsy Au Eyjpfx Afaswf -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm Nwodpoy Aubusfx Afajf plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Brand: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side roll diameter: 165 mm Bending force against top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Nedpfx Afsy Atwbjaewf Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. A live demonstration under power is possible at any time in our showroom.

Year of construction: 1989, condition: ready for operation (used), Various spot welding machines and a Dalex cooling unit are available. 1) 2x spot welding machine Dalex PL 80-1, rated power (50%): 80kVA, max. welding power: 245kVA, max. short-circuit current: 35kA, primary voltage: 380V, open-circuit voltage: 8.44V, cooling water quantity: 10l/min, electrode force range: 100daN-600daN. 2) Spot welding machine Dalex PMS 10/1, rated power (50%): 32kVA, max. primary short-circuit current: 30kA, primary voltage: 380V, open-circuit voltage: 4.6V, electrode force range: 65daN-390daN. 3) Spot welding machine Dalex SL 16/EA, rated power (50%): 16kVA, connected load: 37kVA, secondary short-circuit current: 17kA, electrode force range: 17daN-278daN, open-circuit voltage: 3.6V, weight: approx. 200kg. 4) 2x spot welding gun Dalex RS 11 and 3136. 5) Water cooling unit Dalex DRF 4, year of manufacture: 1989, refrigerant: R22, filling weight: 3.5kg, volume flow: 1.3m³/h, max. operating overpressure: 26bar, cooling capacity: 4.5kW, weight: approx. 140kg. An on-site inspection is possible. A package sale is preferred. Nwodpfx Afsy Eg Dteajf

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front Nodsxacdvopfx Afaowf * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: used, Year of construction: 2006, operating hours: 45,000 h, functionality: fully functional, machine/vehicle number: BAS100, BAS050-11, type of input current: three-phase, nominal power (apparent): 25 kVA, working range: 67 mm, nominal power at 50% duty cycle: 25 kVA, We have our used Ideal Germany Flash Butt welding and Annealing machine models BAS100 with automatic annealing and BAS050-11 along with Ideal grinding machines 2 nos , Italian make tooth protection machine 1 no and Ideal Shearing machine 1 no. for sale. Sales also includes following accessories : 10 sets of welding electrodes for BAS050-11 (unused) Nodpfx Asy Dzxvjfajwf 15 sets of welding electrodes for BAS100 ( used) maintenance spares for BAS100 machine ( like fues, pneumatic etc) All machines in fully working Condition. ( Currently in use )

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and inspected Rated voltage: 400V Rated power: 60kVA at 50% duty cycle Short-circuit current: 22kA Welding current: 17.6kA Fuse protection: 125A Throat depth: 420mm Electrode force: 470daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode taper MK2 – new electrode holder New 2-stage foot switch according to UVV All pneumatic and water hoses renewed Weight approx. 330kg Nodpfx Afjh N Sd Ueaewf - TE 180 with digital display of welding current, current rise, etc. - Main switch at control cabinet - Original documentation / operating manual available - Machine inspection with confirmation 02/2026 Demonstration and inspection by appointment, Commissioning and training at customer’s site available for an additional charge The unit is located in Dresden, near A17 A suitable cooling unit is always in stock – available at an additional cost ;-)

Year of construction: 2021, condition: ready for operation (used), A height-adjustable turning device PETec for welding work is available. Rotation function: 360°, max. load capacity: 1000kg, height adjustment range: 500mm-2000mm, column spacing range: 500mm-3000mm. An on-site inspection is possible. Nedpfxjy D Tqwj Afaowf

Year of construction: 2011, condition: ready for operation (used), A dough sheeting machine Fritsch for folded dough sheets for subsequent processing is available. Belt width: 700mm, working width: 650mm, roller gap range: 0.3mm-50mm, roller diameter: 98mm, max. dough block weight: approx. 20kg, belt speed: 50m/min, machine dimensions X/Y/Z: approx. 3300mm/1250mm/1550mm, weight: approx. 500kg. An on-site inspection is possible. Nsdoy D Tpgopfx Afaswf

Condition: used, plate thickness 4,0 mm roll diameter ca. 120 mm throat 450 mm Nwjdpsy D A Eqjfx Afasf weight of the machine ca. 0,48 t dimensions of the machine ca. 1,3 x 0,8 x 1,8 mm

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Manufacturer: Dalex, 2 coupled spot welding machines, with storage table -Type: SL 25/EA -Rated power: 25 kVA each -Projection: 600 mm -Intermediate dimension: up to 1590 mm -Operation: via foot pedal -Individual components: see photos -Dimensions: Machine 2140/1160/H1220 mm / Table 1565/1075/1140 mm Nsdpfxsyz Rd Ae Afajwf -Weight: 535 kg / 112 kg

Condition: excellent (used), pressure 0,5 - 20 t max. workpiece diameter 5 - 75 mm threading length 2000 mm pitch in mm 8 mm diameter of roll spindle taper 69,85 tool diameter 200 mm roll spindle turning speed range 20 - 90 U/min stroke 0 - 20 mm total power requirement 7,5 kW weight of the machine ca. 3,1 t Njdpfxevpaa Rs Afaswf dimensions of the machine ca. 1,9 x 1,1 x 1,2 m

Condition: good (used), Year of construction: 1973, pressure 0,5 - 10 t max. workpiece diameter 2 - 50 mm threading length 2000 mm pitch in mm 3 mm diameter of roll spindle taper 54 tool diameter 145 mm roll spindle turning speed range 41 - 129 U/min stroke 0 - 8 mm total power requirement 4,5 kW Nsdovpaakspfx Afaewf weight of the machine ca. 1,3 t dimensions of the machine ca. 1,3 x 1,2 x 1,2 m

Condition: new, Shaft diameter: 180Upper Roll Diameter: 60Bottom Roll Diameter: 50working speed: 5motor power: 3length: 1200width: 850heigth: 1200weight approx.: 1000 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 7 Screen EURO 9.000,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80 Nwedpfxod Ab H No Afaef         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength