Used Multigraf Touchline Tf-375 for sale (1,853)

Condition: used, power: 100 kW (135.96 HP), Year of construction: 2023, operating hours: 219 h, maximum speed: 40 km/h, Operating hours: 219, First registration: 16.01.2024 _____ Max. load capacity: 4,200 kg Max. lift height: 7,000 mm Max. outreach: 3,800 mm Length to attachment carrier: 4,730 mm Width: 2,310 mm Height: 2,530 mm / 2,590 mm (with CS activated) Total weight with forks: 8,170 kg Total weight without forks: 8,000 kg Engine: 4-cylinder Perkins 904J 3.6 l displacement, water-cooled Output: 100 kW (136 HP) 2,300 rpm Hydraulic reversing fan Emission Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement EPD PLUS incl., with optional automatic rpm increase Mineral-based hydraulic oil HVI 46 Transmission: 2 speeds, electrohydraulically controlled Vmax = 1st / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: closed cab, split door, 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear wipers Sunblind 4x1 electronic joystick with capacitive enable incl. direction selector switch CS = hydropneumatic cab suspension Telescopic boom: 2-section with electronic end-position dampening (Soft Stop) Quick-attach device carrier Type "ZM2" hydraulically controlled from cab Steering: hydraulic steering, 3 steering modes: all-wheel, front-wheel, crab steer Permanent all-wheel drive Axles: fixed front axle, oscillating rear axle Brake system: servo-assisted disc brakes on all four drive shafts, automatic parking brake when engine is off Frame: high-strength steel design Hydraulic system: variable displacement pump "LOAD SENSING" Working hydraulics flow: 151 l/min Hydraulic fan flow: 46 l/min Total flow rate: 197 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12 V, 100 Ah battery, 120 A alternator Stabilization control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, implement detection, and overload shutoff Tires: 460/70 R 24 Standard equipment: servo brake, hydraulic oil cooler, rear mounting plate for tow bar, hydraulic reversing fan, radio prep, work lights on cab (2 front, 2 rear), preinstalled function for auxiliary hydraulics at boom head, 2 hydraulic connections at boom head, load protection guard on attachment carrier, road lighting, automatic main battery disconnect, electrical cable in boom, acoustic reverse signal, lift cylinder support for safety Special equipment: EU homologation as tractor/ towing vehicle 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. trailer lighting connector Air conditioning Boom suspension (B.S.S.) LED work lights on cab (2 front, 2 rear) 2 work lights at the end of the first boom section (base boom) ASCS upgrade: monitor with all ASCS functions + thumb... Fpsdpfxopcht Ho Aalog

Condition: used, Year of construction: 2024, operating hours: 193 h, maximum speed: 40 km/h, Operating hours: 193, First registration: 15.01.2025 Basic equipment / technical data - Max. lifting capacity: 4,200 kg - Max. lifting height: 7,000 mm - Max. outreach: 3,800 mm - Length to attachment plate: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (with CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg Engine - Deutz TCD 3.6, 4-cylinder, 3.6 liters displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversing fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) - Hydrostatic drive pump: electronically controlled with variable displacement - Motor: variable displacement - EPD TOP including optional automatic rpm increase - Mineral hydraulic oil HVI 46 Fpsdeuycgfopfx Aalog Transmission - 2 gears, electrohydraulic control - Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cabin - Enclosed cab - Split door - 360-degree all-around visibility - GRAMMER V3611 air-suspended seat with lap belt - ROPS/FOPS certified - Heater - Front, roof, and rear wipers - Sunblind - 4x1 joystick electronic with capacitive release incl. direction selector - CS = hydropneumatic suspension for cab vibration damping Telescopic Boom - 2-piece, with electronic end-position damping (Soft Stop) Attachment carrier - Quick change system type "ZM2", hydraulically controlled from the cabin Steering - Hydraulic steering - 3 steering modes: all-wheel, front-wheel, crab steering Drive - Permanent all-wheel drive Axles - Front axle rigid, rear axle oscillating Braking System - Power-assisted disc brakes on all four drive wheels - Automatically applied parking brake when engine is off Chassis - High-strength steel frame construction Hydraulic System - Load Sensing variable displacement pump - Hydraulic work circuit: 150 l/min - Hydraulic fan circuit: 46 l/min - Total: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics - 12 V - 100 Ah battery - 120 A alternator Stability Control - Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual alarm, attachment recognition, and overload shutdown Tyres - 460/70 R 24 Michelin XMCL Standard Equipment - Servo brake - Hydraulic oil cooler - Rear plate for towing hitch mounting - Hydraulic reversing fan - Radio pre-installation - Work lights on cabin (2 front, 2 rear) - Preparation for auxiliary function at boom head - 2 hydraulic connections at boom head - Attach. protection guard on carrier - Road travel lighting - Automatic battery main switch - Electric cable inside boom - Acoustic signal when reversing - Hoist cylinder support for securing Optional Equipment - EU road approval as tractor/tow vehicle 40 km/h incl. self-locking hitch, 30/32 mm pin, trailer lighting socket - Air conditioning - Boom vibration damping (B.S.S.) - LED work lights on cab (2 front, 2 rear) - 2 work lights on the first boom section (base boom) - AS

Condition: new, Year of construction: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump delivery rate: 40 m³/h Pump power: 1.5 kW Sound level: 70 dB Heating temperature: max. 200 °C Heating power: 16 kW Fsdpfx Aasi Hplkslepg Machine length: 3100 mm Machine width: 1650 mm Machine height: 1100 mm Weight: 850 kg

Condition: used, Year: N/A Condition: good Configuration: - High-lift forklift - Automatic adjustment of folding pockets - Vacuum feeding of sheets + leveling ball guide - Programmable control panel - Dose counter - Tine scraper Technical specification: - Maximum paper size: 450 × 650 mm - Minimal paper size: 90 × 150 mm - Number of punch dimples pockets: 2 - Minimum warehouse length: 20 mm - Speed:up to 30,000 arches/hour - Minimum weight: 50 g/m² - Maximum weight capacity: 240 g/m² Fpjdpfxjy I Tkxo Aalsg

Condition: used, Year of construction: 2002, Overview This SMI TF 300 tray forming machine, manufactured in 2002, is designed for the automatic forming of trays in beverage packaging lines. The machine was previously used for packing 4x6x0.5L sixpacks into trays and achieves a capacity of up to 23 packs per minute, making it suitable for medium-capacity end-of-line packaging operations. Due to the discontinuation of disposable production, the machine was dismantled in calendar week 11/2026 and is currently in storage. Technical data Manufacturer: SMI Model: TF 300 Machine type: Tray forming machine (tray erector / tray packer) Year of manufacture: 2002 Capacity: approx. 23 packs per minute Application: Tray packing of multipacks (e.g. 4x6x0.5L sixpacks) Equipment Automatic tray forming system Suitable for beverage multipack tray applications Integration capability into existing packaging lines Fedpfx Aey Hi U Dealjpg

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 400 h, load capacity: 4,500 kg, lifting height: 10,600 mm, fuel type: diesel, mast type: telescopic, construction height: 2,530 mm, empty load weight: 10,300 kg, total length: 5,040 mm, drive type: Diesel, construction width: 2,350 mm, Rigid telescopic forklift Mast type: Telescopic Technical condition: New Front tires size: 500/70 r 24 michelin xcml Fpodpfoxfm Nysx Aalog Rear tires size: 500/70 r 24 michelin xcml

Condition: new, functionality: fully functional, NORD DRIVESYSTEMS SK 01F AL-90SP/4 TF | New Gearmotor No. 7 Gearbox Technical Specification: Manufacturer: NORD DRIVESYSTEMS (Getriebebau NORD GmbH) Fodpfx Aasy I Dqpelepg Type: SK 01F AL-90SP/4 TF Serial number: 204001420-100 Year of manufacture: 2024 Output torque (M2): 39 Nm Gear ratio (i): 5.20 Output speed (n2): 275 rpm Input power (P1): 1.10 kW Weight: 24 kg Lubrication: CLP 220 oil (0.220 l) Motor Technical Specification (NORD SK 90SP/4 TF): Model: SK 90SP/4 TF Year of manufacture: 2023 Power: 1.10 kW Rotational speed: 1430 rpm (50 Hz) / 1740 rpm (60 Hz) Voltage: 230/400 V (50 Hz) / 265/460 V (60 Hz) Efficiency class: IE3 (85.3% at 50 Hz) Protection rating: IP55 Motor weight: 16 kg Complete NORD DRIVESYSTEMS gearmotor consisting of a high-performance helical gearbox manufactured in France and an energy-efficient IE3-class electric motor made in Poland. The device features a compact blue housing and is designed for continuous operation (S1 duty) in demanding industrial applications. With a high output torque of 39 Nm at an output speed of 275 rpm, this set is ideal for driving conveyors, mixers, and other process line components, delivering high energy efficiency and reliable performance.

Condition: excellent (used), Machining Center MASTERWOOD TF 100 2.0 -used- Through-feed processing, Ball screw spindles on all axes, Network card for remote maintenance, Integrated control cabinet, Saw unit for grooving in X-direction, Pick-up tool changer, Automatic central lubrication, Panel measuring sensor, New drill set, New grooving saw blade, Clamex option available, Door processing option available Fpodpfxey Eylws Aalsg ----- Technical Data ----- Min. workpiece length X: unlimited, Min. workpiece length Y: 1,000 mm, Min. workpiece thickness: 60 mm, Number of vertical drilling spindles: 10 pcs, Number of horizontal double drilling spindles in X-direction: 2 pcs, Number of horizontal double drilling spindles in Y-direction: 1 pc, Saw blade diameter of saw unit: 120 mm, Number of tools in the changer: 6 pcs, Extraction port diameter: 150 mm, Compressed air connection: 6-8 bar, Dimensions (LxWxH): 1,920 x 2,818 x 1,620 mm, Weight: 1,500 kg Quality Information: - Full basic cleaning - Electrical system checked - Pneumatic system checked - Set according to manufacturer's specifications - Immediately ready for operation

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: V1 01HOHS300KET5ESGR0SZ580, warranty duration: 12 months, The machine is usually always in stock. Short delivery times are possible. System Features 1. 2.5-meter-long chain conveyor (other lengths available upon request) 2. Adjustable bag former 3. Double film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Solid center fin seal structure 6. Four servo-controlled drives - Active material feed shaft - Center seal - End seal - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in local language Fsdpsq Ikgkefx Aalopg 11. Print mark control 12. Programmable bag length 13. Standard travel direction: left to right Technical Parameters 1. Product length: L40 - 300 mm 2. Product width: W30 - 160 mm 3. Product height: H5 - 60 mm 4. Packaging speed: up to 300 products/min (depending on product, bag length, material, and number of sealing jaws) 5. Maximum film width: 500 mm 6. Supply voltage: 1-phase 220V 50Hz 7. Total power: approx. 7.5 kW 8. Machine weight: approx. 450 kg 9. Machine dimensions: approx. 4250 x 990 x 1650 mm

Condition: new, functionality: fully functional, Features of the system: 1. Chain conveyor belt, 2.9 meters in length (other lengths available upon request) 2. Two custom-made units with fixed form shoulder, tailored to product dimensions 3. Single film loader + automatic film centering device 4. Box motion end sealing unit with single sealing jaw 5. Robust, central fin seal structure 6. Eight servo-driven actuators 7. HMI control panel 8. Four individual temperature controllers 9. Stainless steel 304 housing 10. Documentation in the local language 11. Print mark control 12. Programmable bag length 13. Standard direction of operation: left to right Fsdpsk Dz Hwjfx Aalepg Technical parameters: 1. Product length: L120-600mm 2. Product width: W70-250mm 3. Product height: H20-120mm 4. Packaging speed: up to 60 products per minute (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1Ph, 220V, 50Hz 7. Overall power: approx. 8.8 kW 8. Machine weight: approx. 1100 kg 9. Machine dimensions: approx. 4500 x 1070 x 1590 mm

Condition: used, power: 85 kW (115.57 HP), Year of construction: 2022, operating hours: 2,277 h, Operating hours: 2277, First registration: 24.05.2022 Year of manufacture: 2022 Approx. operating hours: 2200 Max. lifting capacity: 3,300 kg Max. lifting height: 6,600 mm Max. outreach: 3,500 mm Length to attachment carrier: 4,310 mm Width: 2,100 mm Height: 2,120 mm Total weight with forks: 6,500 kg Total weight without forks: 6,330 kg Engine: 4-cylinder Deutz TCD 3.6 Displacement: 3.6 l, Water-cooled Output: 85 kW (115 hp) 2,300 rpm Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive pump: electronically controlled with variable flow rate Engine: variable displacement motor EPD TOP incl. with optional automatic rpm increase Mineral hydraulic oil HVI 46 Transmission: 2-speed, electrohydraulically controlled Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: enclosed cab, split door, 360° all-round visibility GRAMMER air-suspended seat with lap belt ROPS/FOPS certified Fpodpfx Aasupq Tqslog Heater Front, roof, and rear windscreen wipers Sun blind 4x1 joystick, electronically controlled with capacitive enable, incl. direction control switch Telescopic boom, 2-stage with electronic end-position cushioning (Soft Stop) Attachment carrier quick-coupler system type "ZM2", hydraulically controlled from the cab Steering: hydraulic steering, 3 steering modes: all-wheel, front-wheel, crab steer Drive: permanent all-wheel drive Axles: front axle fixed, rear axle oscillating Braking system: servo-assisted disc brakes on all four drive shafts; automatically applied parking brake when engine stops Hydraulic system: variable displacement pump, "LOAD SENSING" type Work hydraulics flow rate: 125 l/min Hydraulic fan flow rate: 46 l/min Total flow rate: 171 l/min Working pressure: 210 bar Flow-sharing control block Electrics: 12 V, 100 Ah battery, 120A alternator Stabilisation control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual warning, attachment recognition, and overload cut-off Special equipment: Tyres: 400/70-24 158A8 Rear hydraulic connection with separate control EU approval as tractor/agricultural tractor, 40 km/h Tow hitch, height adjustable, self-locking, 30/32 mm pin, incl. trailer lighting connection Air conditioning Boom suspension (B.S.S.) LED beacon on cab roof (approval responsibility of the customer!) LED work lights on cab (2 front, 2 rear) instead of standard halogen headlights 2 work lights at the end of the first arm (main boom) ASCS upgrade: Monitor with all ASCS functions + continuous flow at the front Location: Raiba Üttfeld

Condition: excellent (used), Year of construction: 2015, Clamping unit: 50 tons Oppening stroke (max. kN/mm) : 30 / 250 Mould height (fixed/variable) min.-max. mm: ---/172/272 Platen daylight (fixed/variable) max. mm: ---/422-522 Shuttle table stroke: 650 mm Fpsdpfxsx H Nu Rs Aaljg Screw diameter: 20 mm Injection volume: 31 cm3 Shot weight: 29 g Injection pressure: 2500 bar Working hours: 7600 hours 1 x hydraulic core 1 x pneumatic core 6 x hot runners

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 3,000 kg, lifting height: 8,600 mm, fuel type: diesel, mast type: telescopic, construction height: 2,120 mm, empty load weight: 7,200 kg, total length: 4,330 mm, drive type: Diesel, construction width: 2,100 mm, Rigid telescopic forklift Mast type: Telescopic Technical condition: New Front tires size: 400/70-20 Rear tires size: 400/70-20 Fpodjy Hm D Nopfx Aaljg

Condition: used, Year of construction: 2026, load capacity: 3,800 kg, fuel type: diesel, mast type: telescopic, construction height: 2,530 mm, empty load weight: 8,500 kg, total length: 4,760 mm, drive type: Diesel, construction width: 2,310 mm, Rigid telehandler Fpsdpfxey Hm D As Aaleg Mast type: Telescopic Front tyre size: 460/70 R 24 Rear tyre size: 460/70 R 24

Condition: good (used), Work area Centre height: 375 mm Centre distance: 3000 mm Max. turning diameter over bed: 750 mm Max. turning diameter over saddle: 200 - 230 mm Spindle speeds: 20 - 1000 rpm Main drive motor power: 7.5 - 11 kW Weight approx.: approx. 3800 kg Fodpfx Aasy A H T Ajlspg

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 4,200 kg, lifting height: 7,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,530 mm, empty load weight: 8,000 kg, total length: 4,730 mm, drive type: Diesel, construction width: 2,310 mm, Telescopic forklift rigid Mast type: Telescopic Fjdpfxeywpv Ne Aaljpg Technical condition: New Front tires size: 460/70 r 24 michelin xcml Rear tires size: 460/70 r 24 michelin xcml

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: RS 110-6-2 TF, functionality: fully functional, filter area: 660 m², total height: 10,400 mm, total length: 9,200 mm, total width: 2,500 mm, overall weight: 9,000 kg, Equipment: documentation/manual, Industrial Extraction System Venti Oelde, Spülluftfilter RS 110-6-2 TF, High-Performance System Airflow approx. 87,500 m³/h, 660 m² filtration area, year of manufacture 1997, incl. 3 high-performance fans, incl. ductwork, incl. air recirculation for approx. 70,000 m³/h, excl. spark extinguishing system. For sale is a powerful industrial extraction system by Venti Oelde, designed for an airflow of approx. 87,500 m³/h. The system has been in continuous operation and is suitable for use in larger industrial applications (e.g., wood processing, furniture manufacturing, operations with high chip and dust volumes). 👉 This is a complete central extraction system, not a standalone unit! Key Technical Data (excerpt) - Airflow: approx. 87,500 m³/h - Configuration: Central extraction - Year of manufacture: approx. 1997 - Application area: Industry / continuous duty - Robust steel construction - Built for heavy-duty continuous operation Scope of Delivery - Filtration system - Fans - Ductwork - Air recirculation unit - Steel frame / support structure Condition - System was operational until recently - Used, age-related, but solid industrial build quality - Inspection is explicitly encouraged Special Features - Very high air capacity – ideal for large-scale production facilities - Immediately available – no long lead times as with new systems - Heavy-duty construction – durable industrial technology - Attractive alternative to costly new installations - Dismantling support can be organized at extra cost!!!! The offered machine is sold as a used system. Sale is conducted with exclusion of any liability for material defects. Fedpfx Aaoywflaolspg The machine is sold as inspected and excluding any warranties. The seller accepts no guarantee regarding the functionality, performance, or suitability for any particular purpose. Disclaimer All liability for material defects is excluded. This does not apply to damages arising from injury to life, body, or health, or in cases of intentional or grossly negligent conduct by the seller. Dismantling and Transport Dismantling of the system is to be undertaken by the buyer at their own risk and expense. The buyer is responsible for all costs and risks associated with dismantling, loading, and transport. Transfer of Risk The risk passes to the buyer at the latest upon commencement of dismantling and/or loading. Other Information No liability is accepted for hidden defects. All information regarding the machine (e.g., year of manufacture, operating hours, technical data) is given to the best of our knowledge but without guarantee.

Condition: used, Year of construction: 2025, operating hours: 122 h, Operating hours: 122, First registration: 08.10.2025 Maximum lifting capacity: 3,000 kg Maximum lifting height: 6,700 mm Maximum outreach: 3,800 mm Length to attachment carrier: 4,510 mm Width: 2,000 mm Height: 2,120 mm Total weight with forks: 6,620 kg Total weight without forks: 6,450 kg Engine: 4-cylinder Deutz TCD 2.9 2.9 L displacement, water-cooled Power: 75 kW (101 hp) 2,600 rpm Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement motor EPD PLUS including optional automatic rpm increase Mineral hydraulic oil HVI 46 Transmission: 2-speed Electrohydraulic control Vmax = 1st / 2nd gear = 16/20 km/h, optional 40 km/h Cab: Fully enclosed cabin, split door 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear wipers Sunblind 4x1 joystick, electronic with capacitive release and travel direction switch Telescopic boom: 2-section with electronic end position cushioning (Soft Stop) Attachment carrier: Quick-change system type “ZM2” hydraulically controlled from the cab Steering: Hydraulic steering 3 steering modes: four-wheel, front-wheel, crab steering Drive: Permanent all-wheel drive Axles: Front axle rigid Rear axle oscillating Braking system: Servo-assisted disc brakes on all four wheels Automatic parking brake when engine is off Hydraulic system: Load-sensing pump with variable output Total flow: 100 l/min Working pressure: 250 bar Flow-sharing control block Electrics: Fpsdeyv S Ufepfx Aaleg 12V battery with 100 Ah Alternator 120A Stabilization control: Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, attachment recognition and overload cut-off Tyres: 400/70-20, agricultural tread Standard equipment: Power brake Hydraulic oil cooler Rear plate for mounting a trailer hitch Radio preparation Work lights on cabin (2 front, 2 rear) V2001 preparation for additional function at boom head 2 hydraulic connections at boom head Load guard on attachment carrier Road lighting Automatic battery disconnect switch Electrical connection cable inside boom Audible reverse warning Lift cylinder support for safety 1 Operating manual 1 Engine manual Special equipment: EU approval as tractor/towing vehicle 40 km/h incl. height-adjustable, self-locking trailer hitch, 30/32 mm pins, trailer lighting connection Air conditioning LED work lights on cabin (2 front, 2 rear) Boom suspension (B.S.S.) Location: 54595 Prüm

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 6,700 mm, fuel type: diesel, mast type: telescopic, construction height: 2,120 mm, empty load weight: 6,450 kg, total length: 4,510 mm, drive type: Diesel, construction width: 2,000 mm, Rigid telehandler Mast type: Telescopic Technical condition: New Front tires: 400/70-20, field tread pattern Rear tires: 400/70-20, field tread pattern Fjdpfxsxntnbs Aalspg

Condition: new, functionality: fully functional, Features of the Unit 1. Chain conveyor belt, 2 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotative end sealing unit, double sealing jaw 5. Robust, central fin seal structure 6. Three servo-controlled drives 7. HMI control panel Fpedpfx Ajydqahjalog 8. Two individual temperature controllers 9. Housing made of 304 stainless steel 10. Documentation in the local language 11. Print mark control 12. Programmable bag length 13. Standard running direction: left to right Technical Specifications 1. Product length: L90–300 mm 2. Product width: W30–160 mm 3. Product height: H5–55 mm 4. Packaging speed: up to 125 products/min (depending on product, bag length, material, and number of sealing jaws) 5. Maximum film width: 370 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 6.5 kW 8. Machine weight: approx. 400 kg 9. Machine dimensions: approx. 3500 x 950 x 1450 mm

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 4,200 kg, lifting height: 7,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,530 mm, empty load weight: 7,800 kg, total length: 4,730 mm, drive type: Diesel, construction width: 2,310 mm, Telescopic forklift rigid Mast type: Telescopic Technical condition: New Fpedoy Dwi Repfx Aaljg Front tires size: 460/70 r 24 michelin xcml Rear tires size: 460/70 r 24 michelin xcml

Year of construction: 2010, operating hours: 10,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 443, Used in the biomedical sector for thermoforming blister packs. Bottom film reel width: 320 mm, top film reel width: 300 mm, vacuum pump. Fedpfx Aasx H Tcfjlopg

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 6,700 mm, fuel type: diesel, mast type: telescopic, construction height: 2,120 mm, empty load weight: 6,450 kg, total length: 4,510 mm, drive type: Diesel, construction width: 2,000 mm, Rigid telehandler Mast type: Telescopic Technical condition: New Front tires: 400/70-20, field tread pattern Rear tires: 400/70-20, field tread pattern Fpjdpsw Ir Ihefx Aaljg

Condition: excellent (used), Year of construction: 2020, input voltage: 400 V, input current: 39 A, input frequency: 50 Hz, overall weight: 40,000 kg, We are offering this used Masterwood TF 600S processing center with throughfeed, year of manufacture 2020. Type: TF 600S Serial number: AABB0130 Year of manufacture: 2020 Genuine 6-sided machining 2 automatic independently controlled clamping grippers Horizontal machining possible from the gripper side 3 independent drilling heads with a total of 47 drilling spindles Grooving saw unit Top and bottom milling spindle Fpodpfx Ajy Dgqkjalog Air cushion table at infeed and in the working area Panel return system at outfeed Barcode scanner Condition: very good Location: 63-025 Pieczkowo, Poland We are a joinery with a branch in Poland, not a dealer If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: U1060515116, Equipment: type plate available, Lincoln Electric Precision TIG 375 – TIG welding unit with water cooling (TEC ARC TC2000) For sale is a high-performance TIG welding unit, model Lincoln Electric Precision TIG 375, ideal for demanding welding applications in industrial environments. Technical highlights: - AC/DC TIG welding (ideal for steel, stainless steel, and aluminum) - Maximum welding current: up to 375 A - Mains voltage: 230 / 400 V - Frequency: 50/60 Hz - High-frequency ignition (HF) - Pulse function and extensive adjustment options - Foot pedal connection available Fpedpfey A Sgnjx Aaleg Equipment: - Integrated TEC ARC TC2000 water cooling - Hose package / torch included - Robust chassis with casters - User-friendly control panel with precise regulation Condition: - Used, fully functional - Normal signs of use (see pictures) - Ready for immediate operation Special features: - Highly reliable industrial equipment from Lincoln Electric - Perfectly suited for workshops, metal construction, and production - High duty cycle for continuous operation Scope of delivery: - Welding machine - Cooling unit (water cooling) - Torch / hose package - Power cable If you are interested or have any questions, feel free to contact us. Viewing and test run possible by appointment.