Used Minda Timperpress V200 for sale (88)

Condition: used, Year of construction: 2021, 2021 | Nissan eNV200 Electric Tipper | Used Commercial Vehicle - Tipper | 7997 kms 📍Location: Poland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 18000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 29 inspection points 26 approved ✅ 0 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Vehicle in good condttion. Electric drive. Battery is healthy at 80% however the tipping operation couldn’t be tested. Probably problem with a fuse. Documents are in the seller's office in Hamburg. Isdpey Niz Aofx Aa Ejid 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40426 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 63,778 h, functionality: fully functional, machine/vehicle number: 06800002061, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS X-axis travel: 800 mm Z-axis travel: 300 mm Rapid traverse rate X: 100 m/min Rapid traverse rate Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter in the front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy in point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump output: 1.7 kW Flow rate at 6 bar: 20 l/min Isdpfxoy T Ikkj Aa Eoid Weight: approx. 6,000 kg Operating hours: 63,778 h Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2002, operating hours: 74,523 h, functionality: fully functional, machine/vehicle number: 06800001121, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS Travel, X-axis: 800 mm Travel, Z-axis: 300 mm Rapid traverse rate, X: 100 m/min Rapid traverse rate, Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy in point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 74,523 h Note: The machine is sold including a small set of accessories! Iedpfsy T Id Dsx Aa Eeid

Condition: ready for operation (used), Year of construction: 2002, operating hours: 77,119 h, functionality: fully functional, machine/vehicle number: 06810000041, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Z-axis: 300 mm Rapid traverse rate X: 100 m/min Rapid traverse rate Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy at point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm Iiedpfxey T Iddj Aa Ejd MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 77,119 h Note: The machine is sold including a small set of accessories!

Condition: refurbished (used), The overhauled vacuum pump is available from stock and ready for immediate use. We recommend installation only by trained personnel. Adaption materials available on request. Oil filling: M4 Delivery time: approx. 5 weeks Technical data: 6.0kW 3x400/690V +/-10% 50Hz IE2 3000 rpm B5-300 size 132S IP55 insulation class F Cold conductor temperature sensor Inlet: protective cover Outlet: protective cover Ultimate pressure of forepump: 5.8 x 10-1 mbar Ultimate pressure of both pumps: 1.1 x 10-2 mbar Subject to prior sale! This offer is valid only for customers within Germany and European countries! Iisdpfx Ajttzh Asa Eed

Condition: new, maximum load weight: 29,965 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2026, Equipment: ABS, Brand new FD-Tec 3-axle tank semi-trailer * SV2011-22-R300 (Tank volume: 30 m³, material thickness: 3 mm stainless steel, temperature range: 0–60°C.) * Former designation SV2006 Basic / Now SV2011 * 8" manual docking funnel * 6" gravity discharge connection * 4" manual cleaning line with 2 x 2.5" nozzles (1 at the front and 1 in the center of the tank) * ABS braking system by Wabco, no electronic air suspension * 9-ton VALX axles, Ø430 disc brake, ET120 * Automatic lift axle on the first axle * Raising/lowering via control from the EBS modulator Ijdpfey Sqrbox Aa Ejid * Start-up assistance: 2nd and 3rd axles can be loaded up to 130% under 30 km/h * Third axle is a self-steering axle * Apollo Vredestein 385/65R22.5 tires * 24-volt lighting system: 2 x LED work lights at the rear, 1 x on the left side * Work lights left and right by the first axle * Standard 15-pin connection + 2 x 7-pin connectors * Flashing side marker lights * Ball valve for drainage at the lowest point of the tank * Vogelsang pump, 6,000 L/min (Pump manufacturer recommends a leakage oil return line) * Automatic pump shut-off * 2 wheel chocks * Left and right (narrow and tall) galvanized steel hose trays, each 5 m (250 mm wide, 190 mm high) * Tension cables above the hose trays * Tire pressure monitoring system, air suspension with lift/lower valve, rotary slide valve * Tank painted with two coats of paint – Category A (without clear coat) * Tank painted in a single color RAL 7030, STONE GREY * Chassis painted in a single color RAL 7016, ANTHRACITE GREY * ...

Condition: new, maximum load weight: 29,965 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2025, Equipment: ABS, Brand new FD-Tec 3-axle tank semi-trailer * SV2011-22-R300 (Tank volume: 30 m³, material thickness: 3 mm stainless steel, temperature range: 0–60°C.) * Former designation SV2006 Basic / Now SV2011 * 8" manual docking funnel * 6" gravity discharge connection * 4" manual cleaning line with 2 x 2.5" nozzles (1 at the front and 1 in the center of the tank) * ABS braking system by Wabco, no electronic air suspension * 9-ton VALX axles, Ø430 disc brake, ET120 * Automatic lift axle on the first axle * Raising/lowering via control from the EBS modulator Iodowwn Abopfx Aa Ejid * Start-up assistance: 2nd and 3rd axles can be loaded up to 130% under 30 km/h * Third axle is a self-steering axle * Apollo Vredestein 385/65R22.5 tires * 24-volt lighting system: 2 x LED work lights at the rear, 1 x on the left side * Work lights left and right by the first axle * Standard 15-pin connection + 2 x 7-pin connectors * Flashing side marker lights * Ball valve for drainage at the lowest point of the tank * Vogelsang pump, 6,000 L/min (Pump manufacturer recommends a leakage oil return line) * Automatic pump shut-off * 2 wheel chocks * Left and right (narrow and tall) galvanized steel hose trays, each 5 m (250 mm wide, 190 mm high) * Tension cables above the hose trays * Tire pressure monitoring system, air suspension with lift/lower valve, rotary slide valve * Tank painted with two coats of paint – Category A (without clear coat) * Tank painted in a single color RAL 7030, STONE GREY * Chassis painted in a single color RAL 7016, ANTHRACITE GREY * ...

Year of construction: 2025, condition: used, New: Yes Empty weight: 400 kg Iiedsvxdx Aopfx Aa Ejd Dimensions of cargo space: 150 x 130 x 107 cm CE mark: yes Please contact Team DPX for more information

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Iisdpfxeytr Swo Aa Eed Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: good (used), operating hours: 34,700 h, functionality: fully functional, fuel type: diesel, output frequency: 50 Hz, nominal power (apparent): 1,250 kVA, type of cooling: water, MTU diesel generator set including exhaust aftertreatment according to 44.BImSchV (from 1/2026, 100mg NOX, 6mg particulates, etc.). A complete overhaul was carried out at 21,000 operating hours for over 100,000 euros. All filters of the exhaust aftertreatment system were replaced in 2025. The exhaust aftertreatment unit can also be purchased separately. Iedpey Nbt Refx Aa Ejid

Condition: excellent (used), We are offering a Busch WV 2000 C, NC 0300 B vacuum pump set. The pumps were rarely used and came from a solar factory. Iijdpfx Asv U Ru Aja Ejd

Condition: excellent (used), Year of construction: 2023, I sell the throughfeed CNC drilling machine HOMAG Weeke Drillteq V-200 (BHX 055), Year 2023. Configuration: 1pc. milling head with tool change 4 positions HSK63 Iisdsy Hfp Rjpfx Aa Esd 13 + 4 + 2 pcs. drilling units 1pc. grooving saw Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. With full documentation and CE. Very good condition. Available immediately.

Condition: excellent (used), You are bidding on: a branded machine - folding press, from a very reputable and well-known manufacturer - Schröder Machine features: Folding press Schröder AKV Rail bends cleanly – test possible Angle display Bending length just over 2m Ijdpsy Hbv Tsfx Aa Eoid Sheet thickness: 2 mm (steel sheet); for aluminum, zinc, etc., up to approx. 3 mm Standard rail – optionally also available with segmented rail (see picture)! Optional back gauge Matching guillotine shear available, e.g., Schröder 2m/3mm (see last picture), or Schechtl HT, Ras, etc. Current new price is approx. €20,000 net without accessories Important! Optionally, you can find and purchase many machines and machine accessories such as various rails, back gauge – everything related to sheet metal and steel processing, including folding presses, guillotine shears, drilling machines, slip rollers, slitting and profiling machines, accessories (beading tools, roll formers for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. I am always available for any questions. You will receive an invoice according to § 25a UStG. Free loading is possible – weight approx. 1550 kg. Viewing and testing are possible and encouraged by telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise; we will be happy to advise you. Collection by the buyer (or a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Item number: Folding Press Schröder AKV 260401

Condition: refurbished (used), Mechanically processed, final pressure: 8 x 10^-2 mbar. Iisdpfxjrtazrj Aa Ejd

Condition: excellent (used), Year of construction: 2007, I sell the 2-lamp UV-drying tunnel Cefla UV 2000 M2 TTE 2000 Year 2007 Working width 1400mm. Iiedpeyzr Agefx Aa Eed Total length 2,00m Very good condition, available immediately.

Condition: used, Year of construction: 1997, lifting height: 5,003 mm, load capacity: 2,000 kg, Warehouse technology Still EGV 2000 Drive Electric Year built 1997 Lifting height (mm) 5,003 Ijdpfx Aeynbrija Eoid Lifting weight (kg) 2,000

Condition: excellent (used), We are offering a Busch WV 2000 C, NC 0300 B vacuum pump set. Iiodpfxjv Uw Sne Aa Eod The pumps were rarely used and came from a solar factory. We have two sets.

Condition: like new (used), Year of construction: 2012, Pump Stand Screw Vacuum Pump & Roots Vacuum Pump Manufacturer: Busch Type: Cobra NC 0630 B + WV 2000 C Status: As New, Refurbished Iedpfjv I Ak Njx Aa Eeid Warranty: 6 Months

Condition: used, Rotary vane vacuum pump - oil-lubricated Manufacturer: Leybold Type: Sogevac SV 200 Cat. No.: 10927 Condition: Overhauled Warranty: 12 months Included: Oil filling (mineral oil), operating manual with parts list Voltage: 50/60 Hz 230-400/460 V Iedpfx Aecnyy Hja Eeid Motor rating: 4 kW Nominal pumping speed: approx. 200 m³/h Ultimate pressure without gas ballast: approx. 0.08 mbar Delivery time: in stock

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 700 mm, table width: 6,000 mm, OPTIMIZING AND DEFECTING CROSS-CUTTING LINE CURSAL MOD. TRV 2000E 700 SX Line configuration: - Motorized roller conveyor 6000 x 760 mm - Chain feeder with singulator (buffer magazine) for boards from 4500 mm up to 6000 mm, capacity 6 boards - Optimizing and defecting cross-cutting saw Cursal mod. TRV 2000 E 700 SX - Roller feed system - Blade diameter 700 mm - Max feed speed 150 m/min - Cutting section 480 x 65 mm - Cutting section 530 x 30 mm - With chalk defect marking system - Year 2015 - Outfeed conveyor belt 5000 x 600 mm Iijdpfsywdx Sox Aa Ejd - Bilateral overhead ejector - N. 2 transfer conveyors for semi-finished parts (1 right + 1 left) - N. 2 accumulation roller conveyors (1 right + 1 left)

Condition: used, Year of construction: 2008, machine/vehicle number: 150344, Order No. 25052 Technical Specifications: - Maximum working width: 2020 mm - Maximum material thickness at 40 kg/mm² strength: 2 mm Isdpfjv Rbq Tjx Aa Eoid - Bending angle adjustment: 0 - 135° - Upper beam clamping via eccentric lever + foot pedal - Maximum opening width/stroke of the upper beam: 100 mm - Height adjustment of the lower beam: 25 mm - Space requirement: approx. W 2950 x H 1200 x D 800 mm - Weight: approx. 1450 kg

Condition: good (used), Year of construction: 1970, Offer 25020 Technical data: - Pressure force 200 t - Projection 400 mm - Table size approx. 1000 x 750 mm Iodpevnmbljfx Aa Eoid - Hole in the table approx. 320 x 220 mm - Ram surface 940 x 400 mm - Ram adjustability 100 mm - Stroke adjustment 20 - 130 mm - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm - Weight approx. 13000 kg

Condition: new, sweeping width 2000 mm dimensions 2350 x 1450 x 1000 mm weight of the machine ca. 350 kg working width 2000 mm, dirt collection tray 300 ltr, Sweeper for forklift, wheel loader, Hoftrac, Iiodjulnbqepfx Aa Ejd with leveling and front support wheel, PPN roller brush 520 mm diameter, splash guard, dirt collection tray with hydraulic emptying, mechanical tilting device, height-adjustable support wheels with metal rims, hydraulic drive, hoses and couplings. Extra storage on the hydraulic motor, Pockets W/H: 200x70 mm. Weight approx. 350 kg. - Made in Germany, powder-coated. Incl. side sweeper 600mm Ø with drive

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, turning height: 1,700 mm, workpiece weight (max.): 10,000 kg, turning diameter over cross slide: 2,040 mm, turning diameter: 2,000 mm, feed length X-axis: 2,000 mm, feed length Z-axis: 1,661 mm, faceplate diameter: 1,600 mm, feed rate Z-axis: 3 m/min, total height: 6,177 mm, total width: 5,638 mm, total length: 3,937 mm, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, type of input current: AC, rotational speed (max.): 258 rpm, rotational speed (min.): 1 rpm, torque: 16,070 Nm, table load: 10,000 kg, table diameter: 1,600 mm, year of last overhaul: 2024, Equipment: rotational speed infinitely variable, - CNC unit (FANUC 32i-A) - Automatic tool exchange unit (ATC) Use Pot quantities (18 Pot) For the linear cutting Standard tool holder Tool holder for the linear cutting - Chuck - Cutting oil Tank - Air Gun unit - Tool & Bed washing unit - Splash guard (Splash guard) Iiedpfx Aaeulk D Ij Ejd - Hydraulic unit - Axis Slide Cover - Working lamp - warning lamp - Ladder and Hand Rail - Tool box for the standard maintenance - Manual MPG - Chip Conveyer

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, F736 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 Retrofit at FA Huttelmaier Very good CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2891 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW Isdpfx Aaou Nvwvj Eeid >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant device >> Operating instructions, spare parts plan To the machine : Universal milling machine Deckel FP1 built in 1985 in very good condition. The FP1 was overhauled by Huttelmaier in 2008. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed rate is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.