Used Microcut Microcut Challenger Vm-1500 for sale (5,361)

Condition: new, Year of construction: 2026, We have high-quality load banks from our series production for sale, with the following technical specifications: Condition: NEW Areas of application: - Load testing of emergency generators and uninterruptible power supply (UPS) systems - Grid stabilization through power consumption - Engine test benches Technical features: Bwodpfx Aiofm T Eus Ner - Load type: Ohmic resistance - Voltage: 400V, also available up to 800V - Frequency: 50/60 Hz - Power factor: 1 - Power: - 250 kW - 500 kW - 800 kW - 1000 kW - 1500 kW - 2000 kW - Load levels can be set via any key combination - Test report printout - Test automation, automatic start of load levels Operation and control: - Directly via the keypad on the load bank - Via remote box (touch panel) - Via potential-free contacts - Optionally available with Modbus for integration into test automation Further features: - Lockable flaps/doors to prevent dust accumulation during storage - Compact design - Lightweight - Portable - Robust construction with container frame - Forklift slots and crane lifting device Includes electrical wiring diagrams Includes manual Includes software Delivery and commissioning possible for an additional charge.

Condition: excellent (used), Weiss Technik SaltEvent Type: SaltEvent SC/UKWT 1500 Year of manufacture: 2022 Recirculating corrosion cyclic test unit / salt spray test unit For sale is a high-quality Weiss Technik SaltEvent SC/UKWT 1500 for corrosion, salt spray, condensation, and climate change testing. The unit is suitable for use in industry, research, development, and quality assurance. Technical data: Manufacturer: Weiss Technik GmbH Type: SaltEvent SC/UKWT 1500, with ring rinsing line Year of manufacture: 2022 Test chamber volume: approx. 1450 liters Temperature / climate data: Temperature range, climate testing: +23°C to +70°C Humidity range: 20% to 98% relative humidity Dew point range: +12°C to +69°C Salt spray test: ambient temperature +5 K to +50°C Condensation test: ambient temperature +5 K to +42°C Electrical data: Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: 9.8 kW Rated current: 18 A Refrigerant according to nameplate: R134a – 1.30 kg – GWP 1430 CO2 equivalent: 1.86 t ND max.: 17 bar g HD max.: 25 bar g Media connections: Compressed air / GN2: max. 12 bar Demineralized water: min. 3 bar / max. 5 bar Water connection for ring rinsing line: max. 6 bar Condensate drain available Exhaust connection available Mains connection: 3/N/PE 400 V / 50 Hz Dimensions according to drawing: External dimensions approx.: 3710 x 1537 x 1769 mm Test chamber length approx.: 2365 mm Insertion height approx.: 850 mm Weight according to nameplate: approx. 710 kg Equipment / features: S!MPAC / Webseason touch control panel Ethernet / network connection USB interface Salt spraying Condensation test Dry climate Climate / humidity operation Ring rinsing line Reservoir Bsdpfx Aoy Hkg Isi Newr Insertion rods / Rod inserts Control cabinet integrated Exhaust connection Compressed air connection Connection for demineralized water Water connection for ring rinsing line Condition Used Optical condition according to the pictures Normal storage and usage marks present Scope of delivery: Weiss Technik SaltEvent SC/UKWT 1500 Scope of delivery as shown in the pictures Inspection possible by arrangement. Loading can be arranged. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, Year of construction: 2026, RPS-1500 The RPS-1500 self-contained sand-and-salt spreader from TISAV is the ideal piece of equipment for the effective spreading of de-icing materials on roads and pavements, minimising the need for manual labour and significantly reducing the risk of accidents and personal injury. The spreader is fitted with a 1.5 m³ hopper featuring a scraper-chain feed mechanism and a disc for spreading materials. Thanks to its self-contained design and compact dimensions, it can be used with any vehicle. Bsdst Ifxljpfx Ai Nowr SPECIFICATIONS: • Spreading width, depending on disc speed – 3–6 m • Hydraulically driven mechanisms • Disc tilt adjustment (manual) • Mixture feed mechanism – scraper-chain • Proportional control system for disc rotation speed via the control unit in the driver’s cab (optional) • Equipment controlled via a control panel from the driver’s cab. • Features its own wheelbase, or can be mounted on the customer’s vehicle.

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,500 kg, fuel type: electric, mast type: duplex, power: 2.2 kW (2.99 HP), battery capacity: 20 Ah, remaining battery capacity: 100 %, battery voltage: 48 V, overall weight: 730 kg, color: red, Equipment: CE marking, Elektro-Hochhubstapler 1,5-Tonnen-Elektro-Handstapler mit einer Hubhöhe von 5 Metern Gerbeur électrique 1.5-ton walk-behind electric forklifts with a lifting height of 5 meters Item Unit Specification Product Model ETS Power Unit Battery Basic Parameters Driving Mode Electric-powered travel Rated Load Kg 1500 Load Center mm 500 Tires Tire Type Nylon Wheel Drive Wheel Size (Diameter × Width) mm Φ200*40 Front Wheel Size (Diameter × Width) mm Φ180*50 Rear Wheel Size (Diameter × Width) mm Φ80*93 Additional Wheel (Size) Bsdpfx Aiezrhzwo Nswr Lift Height mm 5000 Overall Height (With Fork at Lowest Position) mm 2550 Overall Height (With Fork at Highest Position) mm 5500 Fork Ground Clearance (At Lowest Position) mm 90 Basic Dimensions Overall Length mm 1750 Overall Width mm 1000 Fork Length mm 1100 Maximum Adjustable Outer Width of Forks mm 685 Turning Radius mm 1550 Performance Travel Speed (Loaded/Unloaded) Km/h / Lifting Speed (Loaded/Unloaded) mm/s 80/130 Lowering Speed (Loaded/Unloaded) mm/s 110/90 Gradability (Loaded/Unloaded) % / Braking Method Electromagnetic Brake Drive Motor Power KW 0.8 Drive System Lift Motor Power KW 2.2 Battery Voltage/Capacity V/AH 48V/20AH*4

Condition: used, Year of construction: 1998, functionality: fully functional, total height: 850 mm, total length: 3,000 mm, total width: 1,500 mm, Demmeler Welding Table 3,000 x 1,500 mm, including extensive original accessories For sale is a high-quality Demmeler welding table from the production stock of Syntegon Technology GmbH. The welding table was used in the company’s own production and is being sold due to an equipment and inventory reduction, as it is no longer needed. The table features a robust steel construction and the proven Demmeler hole grid system for precise welding, assembly, and jigging operations. The scope of delivery includes a comprehensive package of original Demmeler accessories, consisting of various clamping and stop angles, clamping plates, positioning and stop elements, and other accessories for professional use in mechanical and steel engineering. Technical Data Manufacturer: Demmeler Tabletop dimensions: 3,000 x 1,500 mm Working height: approx. 850 mm Hole grid welding table Solid steel construction Industrial design Ready for immediate use Scope of Delivery Demmeler Welding Table 3,000 x 1,500 mm Large clamping and stop angles Angle and positioning elements Clamping plates and stops Other original Demmeler accessories as shown in the images Condition Used From current production Ready for immediate use Signs of wear consistent with age The welding table is ideally suited for use in mechanical engineering, steel construction, jig and fixture construction, metalworking, and welding workshops. Thanks to the extensive accessories, a wide variety of workpieces can be quickly and precisely positioned and clamped. Inspection possible by appointment. Sale from Syntegon site. Loading and transport are the responsibility of the buyer. Important terms and conditions: Please note that the sale of the welding table is only possible under the following conditions: • Sale exclusively to end-users/manufacturing companies (no resale to dealers) – corresponding company profile required. • Sale only within Germany. Sales/Transfer Conditions: Bsdpfx Aszrg U Aji Njwr • Dismantling, removal, and transport are the responsibility of the buyer and at the buyer's risk. • The buyer provides personnel, tools, and transport equipment. The personnel must only work with appropriate personal protective equipment, and only trained personnel may be used.

Condition: used, functionality: fully functional, gearing type: automatic, fuel type: electric, Year of construction: 2020, We are offering this used MCF RF 1500 SS mobile concrete mixing plant, manufactured in 2020, for sale. Capacity: 1000 liters Bwjdpezrgxbofx Ai Njr If you have any questions or require further information, please feel free to send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2024, new compressed air tank 1500 litres standing, galvanized 11 bar (with fittings) incl. container papers Year of construction: 2024 High-quality VIG compressed air tank in galvanized design. Specifications: -Volume: 1500 liters -Ab. Operating pressure: 11 bar -Medium: Air -Diameter: 900 mm -Container height: 2381 mm Bwodpfx Aovzw Ipoi Ner -Weight: 379 kg -Connection compressed air inlet: 2 x G 2" -Connection compressed air outlet: 2 x G 2" -Connection safety valve: 2 x G 1/2" -Connection condensate drain: G 1 1/2" -Maintenance opening: 2 x hand hole 100x150 mm Manufacture and testing according to EC Directives 2009/105/EC & AD 2000 Design temperature: -10 °C to + 50°C Surface coating: galvanized Visit our shop. We always have a wide range of new and used compressors in stock!

Condition: good (used), Year of construction: 2012, operating hours: 18,000 h, functionality: fully functional, machine/vehicle number: 1097151, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, controller model: Haas CNC Control, total height: 6,350 mm, spindle speed (max.): 12,000 rpm, tool diameter: 76 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, HAAS VM-3 – 2012 We are selling this machine due to purchasing newer, more expensive equipment and limited shop space. The machine is in good working condition and currently under power / in use. Bwodpfjym N Ehsx Ai Nor All standard specifications and dimensions are available online. If you have specific questions, feel free to contact us. The machine is equipped with the option to connect a 4th or 5th axis rotary table. Please note that rotary units are not included in the sale, but the machine is prepared for future expansion. Before shipping, the machine will be professionally cleaned by a specialized company. Tools, holders, chucks, and other accessories used with the machine are included. Transportation is the responsibility of the buyer. Please contact me via email or WhatsApp for more information.

Condition: ready for operation (used), Year of construction: 1992, Immediately available due to business closure: CNC press brake, Lotze Type 327 x 1500 KN Year of manufacture 1992 Bwodpfx Aiozrbyye Ner Cybelec DNC 70 control system Pressing force 150 tons Working length 3500 mm Controlled back gauge Reach 300 mm Stroke 300 mm Drive 15 kW Complete set of upper and lower tooling (prisms) Weight 12 tons Price: EUR 6,000.00 plus VAT, ex works.

Condition: used, Year of construction: 1985, sheet width 1500 mm Bwsdszpzc Nopfx Ai Ner plate thickness 1,75 mm

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, overall weight: 1,200 kg, input voltage: 400 V, total width: 1,050 mm, total length: 1,920 mm, total height: 2,160 mm, filter area: 23.75 m², suction capacity: 1,500 m³/h, Equipment: type plate available, HERDING brand dust extraction and welding fume extraction system. Self-cleaning filter, pneumatic, suitable for plasma, laser, abrasive blasting, grinding gypsum, cement, plastics, and all types of dry dust. Bwedpfx Aiozpxdko Ner The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. Highly efficient Jet-Pulse cleaning system with low compressed air consumption. Model: Delta Comp 1500-5/9 SB Fan power: 5.5 kW Capacity: 1500 m3/h Filtration area: 23.75 m2 Inlet diameter: 150 mm Height: 2.16 m Width: 1.05 m Depth: 1.92 m Weight: 1200 kg Stock number: 1158

Condition: good (used), functionality: fully functional, Year of construction: 2000, load capacity: 1,500 kg, platform length: 3,300 mm, platform width: 1,450 mm, Well-maintained GEDA construction hoist from the first owner: – GEDA 1500 Z/ZP rack and pinion construction hoist – Type B platform with dimensions 3.30 x 1.45 m – 1 loading door, 1 unloading flap – for a maximum of 7 people and loads – Load capacity 1500 kg – Lifting speed 12/30 m/min – Basic unit GEDA 1500 Z/ZP – Cable drum with trailing cable, approx. 50 m – Safety catch – Steel masts with rack and pinion, available upon request – Mast wall brackets, available upon request – Floor-level platforms, available upon request – Possible accessories, see photos 9-11 – Year of manufacture 2000, first owner – Good condition, little used Bsdpfeyfxdkex Ai Njwr – Sale from location Karlsruhe / Southern Germany – Inspection possible by appointment

Condition: repair required (used), functionality: not functional, Circular shear, capacity 1500 x 6 mm, pneumatic system needs to be completely or partially renewed. Bjdpfx Aiszq Sqae Nswr

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, vacuum lifter from Schmalz for heavy plates with new suction cup rubber. Lifting capacity: 150 kg horizontally and vertically. Suction cup can be pivoted 90 degrees by motor. Suction box: 1000 x 675 mm. Audible warning signal for too low vacuum. 400 V, 1.5 kW. Can be attached to an existing chain hoist. Bjdev S Synjpfx Ai Newr CE marking. No inspection book available. Suction cup rubber replaced. As new condition. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this supplier."

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 4,046 h, load capacity: 3,000 kg, lifting height: 4,000 mm, free lift: 1,860 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,600 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,200 mm, fork length: 1,600 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 23X10-12, overall weight: 8,250 kg, empty load weight: 5,250 kg, total height: 2,350 mm, total length: 2,800 mm, total width: 1,950 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C3000 – 2012 – 4,046 hours – LPG – Duplex mast 4,000 mm – Fork Positioner – 1,500 mm Platforms | Fully serviced – New tyres – Optional 4,050 mm Spreader Beam – Condition 5/5 ✅ FT LOGISTICS – Used & New Forklifts with Guaranteed Quality 🚛✅ Ready for operation. No compromises. ⚙️ This COMBILIFT C3000 delivers reliable and efficient handling with minimum downtime. After comprehensive technical and cosmetic servicing, it’s presented like new and is ready for immediate use. 🔧✨ Main specifications 📌 • Year: 2012 | Operating hours: 4,046 • Capacity: 3,000 kg | Load centre: 600 mm • Mast: Duplex 4,000 mm • Fork positioner: 1,200 mm | Forks: 1,600 mm • Platforms: 1,500 mm | Spreader beam: 4,050 mm (option) Bedpfx Aozq R Svsi Newr • Tyres: Superelastic 100% (Front 200/50-10 | Rear 23x10-12) • Heated full cabin ❄️🔥 • Weight: 5,250 kg | Dimensions: 2,350H / 2,800L / 1,950W mm | Overall height: 2,600 mm Ideal for 🏭 narrow aisles, timber/steel/pipe handling, long loads, indoor and outdoor use. Why choose FT LOGISTICS? 🤝 Reliable machinery across Europe. Quality you can trust. ⭐

Condition: good (used), Year of construction: 2013, turning diameter over bed 520 mm turning diameter over slide rest 330 mm turning length 1500 mm spindle bore 80 mm spindle turning speed - stepless 20-2000 U/min Bsdszl Hb Nspfx Ai Njwr spindle drive 7,5 kW weight of the machine ca. 2,2 t

Condition: used, Year of construction: 2007, Haas VM-2 CNC Vertical Machining Center (2007) With 24-Tool ATC and chip auger Bodpfozpattjx Ai Nswr Offerors are required to download the seller required document from the link below. For sales within Israel, offerors should complete section 1 only. For export sales, offerors should complete and return sections 1 and 2. Please note the Removal Instructions in listing, which form part of the terms of sale.

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, wire diameter (max.): 0.33 mm, overall weight: 3,600 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis AGIE Agiecut Challenge 2 wire EDM machine was manufactured in 2002. It has a weight of 3600 kg and operates at a power of 9 kVA. The machine includes additional equipment such as an ICS Cool Energy i-Chiller external cooling unit and a standalone operator console terminal with screen, keyboard, and mouse. If you are looking to get high-quality wire EDM capabilities, consider the AGIE Agiecut Challenge 2 machine we have for sale. Contact us for further details. Bodpfxozpa Abe Ai Newr - Voltage: 3 x 400 V- Frequency: 50 Hz- Power: 9 kVA- Rated Current: 15.2 A- Additional Equipment: ICS Cool Energy i-Chiller external cooling unit mounted on wooden pallet- Additional Equipment: Standalone operator console terminal with screen, keyboard, and mouse

Condition: used, Used Wolfking TSMG 1500/250 stainless steel ASI 304 / 1.4301 horizontal twin paddle mixer total capacity 1 500 ltr. Mixing chamber measures approx. 1 500 mm length x 1 600 mm width. Total lenght of mixer is 3 200 mm. Total height of mixer is 2 200 mm. There is two horizontal twin paddle agitators in the mixing chamber. Agitators speed is 20 PRM driven by two el. motors 7,5 kW. One side discharge with screw installed in the bottom of chamber driven by el. motor 55 kw, 160 PRM. Included: control panel, switchboard Bsdpfx Aiezn N H Ts Njwr

Condition: good (used), Year of construction: 2005, Serial no. 571752, 4 machining axes, travel ranges X/Y/Z 2,050 x 1,050 x 1,000 mm, table size 2,400 x 1,500 mm, table load 10,000 kg, machine bed mounted in a pit, with T-slot clamping surface, electrode changing system type EW15 Linear, dielectric fluid system with cartridge filter system, Ingersoll control system type Multipulse 64, extinguishing system. Bwsdpfxezq Dl As Ai Njr

Condition: ready for operation (used), Edmo Lift CB 1500 B Scissor Lift Table, Lift Table Bjdozq Dbqepfx Ai Nswr Dimensions: 1500mm x 1000mm Max. load capacity: 1500 kg Year of manufacture: 2014 Min. height: 200mm Max. height: 1230mm Lift: 1000mm You are welcome to visit us for an inspection. We can also arrange cost-effective transport for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Edmo Lift CB 1500 B Scissor Lift Table Dimensions: 1500mm x 1000mm Max. load capacity: 1500 Kg Year of manufacture: 2020 Bwedpfx Aiszq A Tlo Njr Min. height: 200mm Max. height: 1230mm Lift: 1000mm You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Edmo Lift CB 1500 B Scissor Lift Table Dimensions: 1500mm x 1000mm Max. load capacity: 1500 kg Year of manufacture: 2015 Min. height: 200mm Max. height: 1230mm Lift: 1000mm You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Bwsdpszq A Sujfx Ai Nsr Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: like new (used), Year of construction: 2022, operating hours: 12,182 h, functionality: fully functional, machine/vehicle number: 259303, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, All-electric injection molding machine with Multilift, conveyor belt, and safety fence from current production Manufacturer: Arburg Type: 520 E 1500-400 Control: Selogica Year: 2022 Machine No.: 259303 Operating Hours: 12,182 h Injection Unit Injection unit/screw: 40 mm Injection volume: 201 ccm Injection weight: 184 g Heating power: 9.7 kW Heating zones: 5 Nozzle travel: 300 mm, 50 kN Injection pressure: 2000 bar Clamping Unit Clear column spacing: 520 x 520 mm Platen size: 695 x 695 mm Clamping force: 150 tons / 1500 kN Opening stroke: 450 mm Maximum platen distance: 700-1000 mm Minimum tool height: 250-550 mm Ejector stroke: 175 mm / Ejector force: 40 kN Weight: 7000 kg Extras • Thermoplastic processing • Cylinder liner, highly wear-resistant Bedpfxszn Av Is Ai Nowr • Open nozzle 400 mm incl. heating band • Nozzle tip, flat • Servo-controlled nozzle travel • Electrical connection for needle-gate nozzle • Tool monitoring for ejector plate safety • Protective device, open at the top • Automatic central lubrication • Volume flow for hydraulic core pulls: 60 l/min • 2 x core pull control • 2 x blow-out • Electrical mold height adjustment • Cooling water with 6 free circuits • Machine-specific cooling circuits, programmable • Conveyor belt, electrically programmable • Selection unit, good/bad • Pneumatic maintenance unit • Equipment packages • Extended travel movements: • Increase in the number of travel stages and intermediate stop functions • Production control: • Production control with temperature setpoint control and programmable alarm cycles • Optimization/Operator Assistance: for adapting the machine to individual operational needs • Quality assurance: • Extends the standard quality monitoring and documentation: • Options for process analysis • Documentation with actual value protocol • Boosting (starting the hot runner nozzles with temperature increase) - free melting • Freely configurable page for start parameters (adjust cycles with other parameters instead of production parameters) • Socket combination: 1x CEE and 1 x Schuko • Socket distributor: (3x CEE and 3 x Schuko) • 12 x electrical heating circuits, each with 2 kW (230V) • Increased power for heating circuits 1-6 to 3.5 kW / 230V each • Connected Systems (CPU Ethernet prepared for 4th service - remote maintenance) • Robot interface Euromap 67 • Coloring interface • Multilift Select / Transversal design, 6 kg handling weight 3 CNC axes can be moved simultaneously / incl. pneumatic valve / vacuum equipment as well as C-axis (folding axis) pneumatic X, Y and Z-axis drives, servo-electric z-1400 mm / X-400 mm / y-800 mm / c-pneumatic folding axis 0-90° 13 Nm / Weight 1.2 kg with special equipment X-axis extended to 600 mm / Y-axis to 1000 mm / C-axis, end positions monitored Clearance height increased by 200 mm • Conveyor belt • Safety fence • 8 freely programmable inputs • 1 interface with 4 freely programmable inputs and outputs The machine is in top condition and can be inspected while powered on. From current production. The machine is available in our warehouse immediately. Free loading onto the buyer's truck or free delivery to the buyer's location against reimbursement of freight costs.

Condition: used, Year of construction: 2019, Saw blade diameter: 350 mm Cutting area flat 90°: 170 x 100 mm Sawing area flat 45°: 120 x 100 mm Cutting area round: 120 mm Pneumatic Saw Blade Feed Bwedpfjznxg Nsx Ai Nor Coolant pump / minimum quantity spray device Pneumatic material clamping Presented for sawing of stainless steel Length stop with automatic positioning up to 6200 mm Roller conveyor with 1000 mm left Weight: approx. 800 kg